loading does NOT fix the problem.
I'd be happy if I could kindly ask for a bugfix.
Gratefully,
Alma
g iff heif-gdk-pixbuf is installed.
Gratefully,
Alma
alled on my computer.)
Gratefully,
Alma
better one, or the
functionality of `-T` has to be altered: it should take into account the
time zone stored in the JPEG file whenever available. Moreover, notice
that the subseconds (in our example, `.455`) should be taken into
account, too, whenever available.
Gratefully,
AlMa
Correction:
… and plugging in the keyboard again.
→
… and disconnecting the keyboard.
Here's a part of the journal between suspend and plugging in the
keyboard again.Aug 12 21:33:08 AnonymizedPC kernel: PM: suspend entry (deep)
Aug 12 23:12:24 AnonymizedPC kernel: Filesystems sync: 0.030 seconds
Aug 12 23:12:24 AnonymizedPC kernel: (NULL device *): firmware: direct-loading
or even months)
after suspend due to inactivity followed by getting awake; much more
often, the keyboard works normally. A simple test consisting of putting
the PC to sleep manually followed by awakening it did not cause the
error to reoccur.
Gratefully,
Alma
tags 907490 - unreproducible - moreinfo
affects 907490 gnome-session-bin gnome-settings-daemon gjs
thanks
In my journal, the error “Unrecoverable failure in required component
org.gnome.Shell.desktop” occurs in red during boot. Shortly before this
error message, lots of other warnings,
On 01.08.23 21:08, AlMa wrote:
This is a rather naive understanding of how logging is done in
practice. The reality is that developers often don't know (and maybe
can't know) just how severe an odd condition may be in practice.
Unfortunately, neither do I. Though seemingly unrelated
t all, then probably the
nouveau driver. The details of this issue are beyond my level of
expertise, so I'm unsure how much I can really do myself.
Gratefully,
Alma
On 01.08.23 10:50, Diederik de Haas wrote:
On Tuesday, 1 August 2023 02:53:19 CEST AlMa wrote:
and my own educated guess: Disable the ASPEED device and see what happens
Any hint on how to do it on the linux command line in grub?
Please read http://www.catb.org/esr/faqs/smart-questions.html
So it wasn't based on some inside/expert knowledge of the problem domain, I
just put what you said in a search engine.
I just tried searching for "powersave governor" and the arch wiki page was
even higher in the result list ...
You seem to have domain knowledge without even realizing this.
as warnings (AFAIK, yellow) and errors (red according to `man
journalctl`). Please don't try to unload on me because of this mess;
I'm just an admin, and not even a developer.
Therefore, please restore the bug reports you closed.
Gratefully,
Alma
to `man
journalctl`). Please don't try to unload on me because of this mess;
I'm just an admin, and not even a developer.
Therefore, please restore the bug reports you closed.
Gratefully,
Alma
https://bugzilla.kernel.org/show_bug.cgi?id=118801 which links to
https://web.archive.org/web/20190904223631/http://my-fuzzy-logic.de/blog/
index.php?/archives/41-Solving-linux-MTRR-problems.html
Thank you, I will look into it!
and my own educated guess: Disable the ASPEED device and see
as warnings (AFAIK, yellow) and errors (red according to `man
journalctl`). Please don't try to unload on me because of this mess;
I'm just an admin, and not even a developer.
Therefore, please restore the bug reports you closed.
Gratefully,
Alma
beginning till the offending message in the subject
line. If you need more, please say so.
Gratefully,
Alma[0.00] microcode: microcode updated early to revision 0x5003501, date = 2022-12-21
[0.00] Linux version 6.1.0-10-amd64 (debian-ker...@lists.debian.org) (gcc-12 (Debian
bian 11 to Debian 12. It took me quite a while (many hours
spread over a few days) to get from that high level to the level of
#1038981, and, as you surely understand, at a certain point I have to
declare the boundary of my current expertise.
Gratefully,
AlMa
y because this happens on two sufficiently different
computers. (It doesn't happen on all computers, e.g., neither on a very
similar tower with the same Asus motherboard and Intel Xeon processor
nor on an Dell Mobile Precision M6700 with the processor Intel
Core i7-3720QM; therefore severity raised only by 1 step.)
Gratefully,
AlMa
gray-white messages, so that the user is nor really feeling warned or
bothered.
Gratefully,
AlMa
Package: gdm3
Version: 43.0-3
Control: affects -1 xorg
In the journal I discovered the following errors (EE) that had been
issued during boot:
/usr/libexec/gdm-x-session[992]: (EE) modeset(0): Failed to set CTM
property: -13
/usr/libexec/gdm-x-session[992]: (EE) modeset(0): failed to set
-white) or as
warnings (and shown in yellow or orange), and that it's possible to
clearly distinguish errors and non-errors.
Gratefully,
AlMa
typo above:
"screenshot" is highlighted
→
“timesyncd” is highlighted
problems later during boot, so it's important for us to know
the extent and the implications of the warnings and errors here.
Gratefully,
AlMa
multiple BARs”? Any
misconfiguration? Any adjustment options the kernel might need? The
machine is a Dell Mobile Precision M6700 with the processor Intel Core
i7-3720QM, 32 GB RAM, and AMD FirePro M6000 Mobility Pro graphic chip
with 2GB GDDR5.
Gratefully,
AlMa
potential consequences of the warnings here?
Gratefully,
AlMa
Package: linux-image-6.1.0-10-amd64
Version: 6.1.37-1
In the journal we find the following error (the line “firewire_ohci …
failure” is red, the line “firewire_ohci … 0x10” is bright white, and
the remaining three lines are grey-white as usual):
…
Jul 15 03:35:14 AnonymizedMachneName kernel:
/share/doc/linux-doc-6.1 talks about HP laptops with this
accelerometer. Here, we have a Dell laptop. So IF the driver is
correct for our accelerometer (how do we find this out with certainty?),
the documentation has to be adapted.
Gratefully,
AlMa
about here. If we believe Jean Delvare from
https://bugzilla.kernel.org/show_bug.cgi?id=48811 , these warnings might
be just informative; the user probably needn't be warned. If this is
really so (myself, I have no idea), there's no need for the orange color.
Gratefully,
AlMa
, but it seems to me that changing anything _safely_ would require me
going into the depths of the memory layout of x86/amd64; nothing that I
would test myself without proper advice.
Gratefully,
AlMa
about? Any fix or remedy?
Gratefully,
AlMa
Package: apt
Version: 2.6.1
Severity: important
apt update fails since upgrading from Debian 11 to Debian 12.
Retypesetting from the screen of the machine with the failure (comments
and irrelevant parts were dropped):
# cat /etc/apt/sources.list
deb http://deb.debian.org/debian stable main
#
ific symbolic
error names and numerical values are unavailable, the aforementioned
messages should be simplified (e.g., "An error was returned by this
process." and "systemd-timesyncd.service: Failed and exited." if this is
really what happened there.)
Gratefully,
AlM
Tiny correction: I wanted to reference the whole
http://gitlab.gnome.org/GNOME/gdm/-/merge_requests/171
and not a single comment therein.
ask the maintainers and
developers for attention to this bug report.
Off-topic, might be related: now (i.e, using xorg), automatic suspend
after a certain timeout doesn't work (the machine remains up and
running), but a manual suspend via gnome menu does work. I'm going to
post another bug report on this.
Gratefully,
AlMa
Package: gnome-settings-daemon
Version: 43.0-4
In my log I discovered the following 4 failures:
…
Jul 06 17:21:29 AnonymizedMachineName gsd-sharing[1240]: Failed to
StopUnit service:
GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Process
org.freedesktop.systemd1 exited with status
found 977830 gdm3/43.0-3
thanks
Similar DBus.Error messages still exist after an upgrade to Debian 12:
Jul 06 09:48:45 AnonymizedMachineName /usr/libexec/gdm-x-session[1076]:
dbus-daemon[1076]: [session uid=119 pid=1076] Successfully activated
service 'org.gnome.Shell.Notifications'
Jul 06
reassign 1036232 libmutter-11-0 43.4-2
thanks
This bug is reassigned to mutter upstream:
https://gitlab.gnome.org/GNOME/mutter/-/issues/2891
Package: emacs
Version: 1:28.2+1-15
Start emacs (it doesn't matter whether you have ~/.emacs or not). The
buffer *Messages* begins as follows:
Loading /etc/emacs/site-start.d/00debian.el (source)...done
Loading /etc/emacs/site-start.d/50a2ps.el (source)...
Error while loading 50a2ps:
Package: auctex
Version: 12.2-1
Reproduce:
1) temporarily remove ~/.emacs
2) start `emacs nonexistent_file.tex`, where nonexistent_file.tex
shouldn't exist
3) Observe
/usr/share/emacs/site-lisp/auctex/preview.elc: Warning: global/dynamic var
‘begin’ lacks a prefix
in the buffer
cf. http://gitlab.gnome.org/GNOME/gnome-shell/-/issues/6820
tags 1036232 - wontfix
severity 1036232 normal
thanks
Reasons given in my prior e-mail.
I assumed your TV tuner was working, but if you are not able to use it even
with other software then it's clearly not a pipewire bug.
As for now, #1035901 bug is just about an error in the journal.
Not being able to bring the TV tuner to work is a separate bug; I yet
need to report because it
Posted upstream as suggested:
https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/3325
I've never been able to make my TV tuner work in Debian. Even scanning
the channels has never worked properly. This problem might,
hypothetically, have its roots partially in the bug here or in the
corresponding kernel driver. Hence an elevated severity may be
justified; please feel free to
I suspect a bug in the driver handling your /dev/video4 device.
Do you have more information about what device is your /dev/video4?
Yes; it seems to be my TV-Tuner Hauppauge WinTV HVR 5525 HD:
$ sudo journalctl -b 2>&1| grep video4
Jul 01 20:27:49 AnonymizedMachineName kernel: cx23885:
Package: gnome-shell
Version: 43.4-1
Control: affects -1 gnome-shell-extension-freon
gnome-shell-extension-weather gnome-shell-extensions-extra
gnome-shell-pomodoro gnome-shell-extensions
In my journal, I get a bunch of messages that a Gnome extension is
already installed and will not be
affects 999227 + xterm gdm3
thanks
Any progress?
As of now, Debian stable 12 does NOT contain xfonts-cyrillic, which is
suggested by xterm 379-1. Further, gdm-x-session from gdm3 43.0-3 still
warns us:
Jun 25 20:25:25 AnonymizedMachineName dbus-daemon[973]: [session uid=119
pid=973]
I take back "often" and "seldom" because after having heavily loaded the
laptop with computations, I observed around 400 MHz for all 8 cores
twice. Though I did observe what I wrote, I cannot claim "often" and
"seldom" for the future behavior beyond reasonable doubt.
So instead of
“… often
Same or similar issue for me here with kernel 6.1.0-9. Journal:
Jun 23 05:25:33 ComputerName kernel: ppdev: user-space parallel port driver
Jun 23 05:25:33 ComputerName systemd[1]: Finished
systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
Jun 23 05:25:33
hich functionality is
affected? Who is the culprit, whom to blame, and what to do?
The following geoclue-related packages are installed: geoclue-2.0,
gir1.2-geoclue-2.0, libgeoclue-2-0, all in version 2.6.0-2; please feel
free to reassign appropriately if necessary.
Gratefully,
AlMa
option: runtime
Entfernen von xbrlapi (6.5-7) ...
In plain English, what does this message tell me? Who is the culprit,
whom to blame, and what to do?
Gratefully,
AlMa
found 1036233 gdm3/43.0-3
severity 1036233 important
affects 1036233 gnome-settings-daemon
thanks
The bug still exists on Debian stable 12. Here's an excerpt from the log:
Jun 22 04:11:23 AnonymizedMachineName org.gnome.Shell.desktop[1148]:
Window manager warning: Failed to parse saved
severity 1036232 important
thanks
Same or similar bug on the current Debian stable 12 “bookworm” (so
raising severity a tiny bit):
Jun 20 03:23:14 AnonymizedComputerName org.gnome.Shell.desktop[1077]:
kmsro: driver missing
Jun 20 03:23:14 AnonymizedComputerName dbus-daemon[1037]: [session
severity 1034904 important
thanks
Same bug for me here:
$ diffuse
Traceback (most recent call last):
File "/usr/bin/diffuse", line 36, in
from diffuse import main
File "/usr/share/diffuse/diffuse/main.py", line 33, in
from diffuse import utils
File
of the Screen (cf. attachment
screenshot-gnome.png). It doesn't matter which symbol exactly GNOME uses
(it may ever be drawn) – Freon should simply use the very same symbol.
Gratefully,
AlMa
3]: Started
xdg-permission-store.service - sandboxed app permission store.
Jun 15 04:42:15 AnonymizedMachineName wireplumber[1124]:
Failed to call Lookup:
GDBus.Error:org.freedesktop.portal.Error.NotFound: No entry for camera
Jun 15 04:42:15 AnonymizedMachineName wireplumber[1124]:
Failed to call Lookup:
GDBus.Error:org.freedesktop.portal.Error.NotFound: No entry for camera
The last two lines are the same. They are displayed in yellow and seem
to report an error of some kind. In plain English, what do they tell
us? Who is to blame? What to do?
Gratefully,
AlMa
”
highlighting/emphasis as of now. Only a generic “lines of level NOTICE
and higher are highlighted” is stated. As a result, the I am confused
when interpreting the output of journalctl -b.
Please explain bold, blue, and yellow in the man pages.
Gratefully,
AlMa
On 14.06.23 18:26, Dylan Aïssi wrote:
As explained in the upstream bug, these warnings messages have been demote
to only log messages, nothing to worry about.
Thank you for a fast clarification! The messages are displayed yellow
and (semi-)bold in my log. So I previously thought that the
really know how bad it was and
what to do next.
Gratefully,
AlMa
severity 1035901 important
found 1035901 0.3.65-3
thanks
The bug still exists in Debian stable with pipewire 0.3.65-3,
wireplumber 0.4.13-1, and the kernel 6.1.0-9-amd64:
Jun 13 21:00:21 AnonymizedMachineName wireplumber[1148]: PipeWire's
libcamera SPA missing or broken. libcamera not
Package: wireplumber
Version: 0.4.13-1
Deep in the journal log I discovered the following failure:
Jun 13 21:00:21 AnonymizedMachineName wireplumber[1148]: PipeWire's
libcamera SPA missing or broken. libcamera not supported.
Jun 13 21:00:21 AnonymizedMachineName rtkit-daemon[1158]:
a nonhuman user can meaningfully have all those
special directories. A repair is needed. Raising severity because more
than one user is affected.
Gratefully,
AlMa
. So
who is the culprit and what to do?
Gratefully,
AlMa
chineName wireplumber[1148]: Failed to set
scheduler settings: Die Operation ist nicht erlaubt
What does this failure (German “Die Operation ist nicht erlaubt” means
“operation not allowed”) tell us, in plain English? How bad is it? Who
is to blame and what to do?
Gratefully,
AlMa
-x-session[…]: (EE) open /dev/fb0: Permission denied”
above; feel free to reassign to another package if another one suits better.
Gratefully,
AlMa
severity 1030979 important
thanks
Raising severity as the bug affects more than one person. The bug is
still there in Debian stable “bookworm” with ifupdown 0.8.41 and
ifupdown-extra 0.33+nmu1:
Jun 13 21:00:24 AnonymizedMachineName gsd-sharing[1420]: Failed to
StopUnit service:
On another, very similar computer with Debian stable “bookworm“, I find
similar “Can't find …” messages. Here, pipewire presents the annoying
message first, i.e., before wireplumber:
Jun 13 21:00:20 AnonymizedMachineName systemd[1095]: Started
wireplumber.service - Multimedia Service Session
t --allow=hotplug)" ]; then
/etc/init.d/acpid:# and a bug in modprobe --all --quiet which
doesn't load all modules and
/etc/init.d/acpid:modprobe --all --use-blacklist $MODULES 2>/dev/null
What does this error message tell us, who is to blame, and how to repair
this?
Is use NetworkManager and a WiFi connection, just in case it matters.
Gratefully,
AlMa
. And/or,
during the upgrade, not to touch the ownership of the directories and files. At
least to give a hint in a README or during installation that the ownership has
to be changed.
Cheers,
Alma
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject
regards,
Alma
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Every girl needs a stud with a 9 inch tool to take them hard in bed.
http://www.Dreamlovas.com/
Paris and Lindsay twosome
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Watch her fondle your toy with pleasure and joy.
http://www.Dreamlovas.com/
Lindsay getting the ride of her life
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Every girl loves a man who measures up in bed heres how.
http://www.Justonemoren.com/
Stripping for pleasure
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Show your hot date a sizzling time in the sack.
http://www.punnotres.com/
Results in just 6-8 weeks.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hi
I'm 27 years old
I read your profile online and I was intrested in getting to know you better
Reply to me and tell me about yourself if you want to chat
I will send a pic and some of my info right away
email me at [EMAIL PROTECTED] , that will be sent to me directly
Thank you
--
To
Zerix Intern.Transver
Manager: Maksim Kovalski
109153 Moskau
leningradskiy 337/2
Tel +7 984-641-1756
Arbeiten Sie endlich für sich selbst!
Sie wollen sich beruflich verändern ?
Sie kommen in ihrem job nicht wie gewünscht voran und wollen eine
neuen karriere-kurs einschlagen? Dann sollten wir
And now we are to control the group, we don't wanna be outsiders.
AN ALLE FINANZINVESTOREN!
DIESE AKTIE WIRD DURCHSTARTEN!
FREITAG 20. APRIL STARTET DIE HAUSSE!
REALISIERTER KURSGEWINN VON 400%+ IN 5 TAGEN!
Symbol: G7Q.F
Company: COUNTY LINE ENERGY
5 Tages Kursziel: 0.95
Schlusskurs: 0.21
WKN:
set computers settings
http://img444.imageshack.us/img444/4991/nejhij6.jpg
NTs main competitor followed line implement
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Desktop Internet Media XPSpecial Vista Gadget and
http://img444.imageshack.us/img444/2871/mklghw7.gif
available Choose edition designed
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
remote FTP server invaluable only insures protection
http://img444.imageshack.us/img444/1449/9wbd7.jpg
Home gt Products Evaluate Overview
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
PUQ0PUQxPUNEPUM5ID1EMz1EMj1DMT1DQyw/PQA=?=
Date: Wed, 1 Nov 2006 12:16:50 -0060
MIME-Version: 1.0
Content-Type: text/plain;
format=flowed;
charset=koi8-r;
reply-type=original
Content-Transfer-Encoding: 8bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook
Tired of working a dead end job ?
Ca.ll u_s now get any de.g.ree you desire in 2weeks! _1.0.0% verifiable
206-338-6061
See you later,
Tonia Bartlett
The smell of gas in no 8. She was skinny, with long straight black
Hello,
A Genuine College Degree in 2 weeks ! 1-206-350-5982 - ccall n0ww !
Have you ever thought that the only thing stopping you from a great job and
better pay was a few letters behind your name?
Well now you can get them!
BA BSc MAMScMBA PhD
Within 2 weeks! No
84 matches
Mail list logo
