Bug#1060410: /etc/pacpl: Full sid upgrade removed packages dependent on perl-5.36.0-10
On 1/10/24 20:16, Bartek wrote: Package: pacpl Version: 6.1.3-1 Severity: important File: /etc/pacpl X-Debbugs-Cc: poem...@gmail.com Dear Maintainer, * What was the outcome of this action? Removing pacpl because it depends on other packages which depend on perlapi-5.36.0, technically perl-5.36.0 * What outcome did you expect instead? Bump dependency version to packages to perlapi-5.36.0 Dear Maintainer, Please close this bug as it has been resolved after last update. Regards, Bartek
Bug#1060410: /etc/pacpl: Full sid upgrade removed packages dependent on perl-5.36.0-10
Package: pacpl Version: 6.1.3-1 Severity: important File: /etc/pacpl X-Debbugs-Cc: poem...@gmail.com Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? Full sid dist-upgrade. * What exactly did you do (or not do) that was effective (or ineffective)? Did not read attentively a warning that some packages will be removed like pacpl and its dependencies. * What was the outcome of this action? Removing pacpl because it depends on other packages which depend on perlapi-5.36.0, technically perl-5.36.0 * What outcome did you expect instead? Bump dependency version to packages to perlapi-5.36.0 sudo apt install pacpl Reading package lists... Done Building dependency tree... Done Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libclone-perl : Depends: perlapi-5.36.0 libhtml-parser-perl : Depends: perlapi-5.36.0 libnet-ssleay-perl : Depends: perlapi-5.36.0 libparams-classify-perl : Depends: libdevel-callchecker-perl but it is not going to be installed Depends: perlapi-5.36.0 E: Unable to correct problems, you have held broken packages -- System Information: Debian Release: trixie/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 6.6.9-x64v2-xanmod1 (SMP w/4 CPU threads; PREEMPT) Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to C.UTF-8), LANGUAGE=C.UTF-8 Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages pacpl depends on: ii libaudio-flac-header-perl 2.4-5+b1 ii libaudio-scan-perl1.01-2+b2 ii libcddb-get-perl 2.28-4 pn libcddb-perl ii libmp3-tag-perl 1.16-1 pn libparallel-forkmanager-perl ii libstring-shellquote-perl 1.04-3 ii perl 5.38.2-2 ii vorbis-tools 1.4.2-1+b1 Versions of packages pacpl recommends: ii cdparanoia3.10.2+debian-14+b1 ii faad 2.11.1-1+b1 ii ffmpeg10:6.1.1-dmo1 ii flac 1.4.3+ds-2+b1 ii lame 1:3.100-dmo2 ii mplayer 4:1.5.0+svn38448-dmo1 pn musepack-tools ii normalize-audio 0.7.7-17 ii opus-tools0.2-1+b1 pn sndfile-programs ii sox 14.4.2+git20190427-4 ii speex 1.2.1-2 ii wavpack 5.6.0-1 Versions of packages pacpl suggests: ii faac 1:1.30-dmo1 ii flake0.11-4 pn twolame
Bug#1032040: Acknowledgement (picard: PIcard needs authorization to import metadata from MusicBrainz server.)
> Picard version 2.8.5-1_amd64 worked as intended without extra step such as requirement to login to the service and necessity of authorization code. Correction: should be picard version 2.8.4-1_amd64. Regards? Bartek
Bug#1032040: picard: PIcard needs authorization to import metadata from MusicBrainz server.
Package: picard Version: 2.8.5-1+b1 Severity: normal Tags: upstream X-Debbugs-Cc: poem...@gmail.com Dear Maintainer, * What led up to the situation? While trying to tag audio files with data from MusicBrainz.org it asks for its account authorization code. * What exactly did you do (or not do) that was effective (or ineffective)? I do not have MusicBrainz.org account to generate such code so files tagging does not work. * What was the outcome of this action? Audio files not tagged. * What outcome did you expect instead? Import metadata from musicbrainz.org Picard version 2.8.5-1_amd64 worked as intended without extra step such as requirement to login to the service and necessity of authorization code. Downgrading to the older version (build from source) requires python3 (< 3.11). Both packages are not available in testing and sid repositories any more. -- System Information: Debian Release: bookworm/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 6.1.14-x64v2-xanmod1 (SMP w/4 CPU threads; PREEMPT) Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to C.UTF-8), LANGUAGE=C.UTF-8 Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages picard depends on: ii libc6 2.36-8 ii libchromaprint-tools 1.5.1-2+b1 ii python3 3.11.2-1 ii python3-dateutil 2.8.2-1 ii python3-fasteners 0.17.3-2 ii python3-jwt 2.6.0-1 ii python3-libdiscid 2.0.2-1+b2 ii python3-markdown 3.4.1-2 ii python3-mutagen 1.46.0-1 ii python3-pyqt5 5.15.9+dfsg-1 ii python3-yaml 6.0-3+b2 Versions of packages picard recommends: ii libqt5multimedia5-plugins 5.15.8-2 ii python3-pyqt5.qtmultimedia 5.15.9+dfsg-1 Versions of packages picard suggests: ii hicolor-icon-theme 0.17-2 -- no debconf information Regards, Bartek
Bug#1024763: Supermicro AOC-STGN-I1S (Intel 82599EN based 10G adapter) - poor network perfomance after moving to Debian 11.5
Package: linux-image Version: 5.10.0-19-amd64 After moving from Debian 9.7 to 11.5 as soon as I perform "ip link set enp1s0 up" for my 10G adapter (AOC-STGN-I1S - Intel 82599EN based 10G adapter) I am experiencing high cpu load (even if no traffic is passing through the adapter) and network performance is low (when network is connected). The cpu load is oscilationg between 0.1 and 0.3 on vanilla system with no network attached. The problem can be observed on the following platforms: Supermicro X9SCL (Intel C202 PCH) and Supermicro X10SLL+-F (Intel C222 Express PCH), but for the Supermicro X11SSL-F (Intel® C232 chipset) everyting is working well. Tested enviroments: Debian 9.7 - Linux 4.9.0-6-amd64 #1 SMP Debian 4.9.88-1+deb9u1 (2018-05-07) x86_64 GNU/Linux [all platforms working well with no problems: Supermicro X9SCL (Intel C202 PCH), Supermicro X10SLL+-F (Intel C222 Express PCH), Supermicro X11SSL-F (Intel® C232 chipset)] Debian 11.5 - Linux 5.10.0-19-amd64 #1 SMP Debian 5.10.149-2 (2022-10-21) x86_64 GNU/Linux [older platforms: Supermicro X9SCL (Intel C202 PCH), Supermicro X10SLL+-F (Intel C222 Express PCH) behave problematic as described above | newer platform: Supermicro X11SSL-F (Intel® C232 chipset) working well with no problems] So far to solve the problem I was trying to upgrade system to the newest stable version, upgrade kernel to version 6.x, upgrade ixgbe driver to the newest version but with no luck. Supermicro support suggested as follows: it might be kernel releted debian 11.5 has kernel 5.10 whihch is a recent kernel it might not properly support the chipsets for X9 therefore i suggest to use RHEL or CentOS as they use much older kernel versions. I expect that with ubuntu 20.04 you see the same problem it uses kernel 5.4
Bug#1016636: puddletag: An error occurs while retriving metatags from Discogs.com
me/user/.config/puddletag/puddletag.conf [2022-08-05 09:40:22,840]DEBUG:reading config file /home/user/.config/puddletag/menus [2022-08-05 09:40:22,841]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:40:22,841]DEBUG:reading config file /home/user/.config/puddletag/menus [2022-08-05 09:40:22,841]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:40:22,841]DEBUG:reading config file /home/user/.config/puddletag/menus [2022-08-05 09:40:22,842]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:40:22,842]DEBUG:reading config file /home/user/.config/puddletag/menus [2022-08-05 09:40:22,843]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:40:22,843]DEBUG:reading config file /home/user/.config/puddletag/menus [2022-08-05 09:40:22,843]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:40:22,844]DEBUG:reading config file /home/user/.config/puddletag/menus [2022-08-05 09:40:22,844]DEBUG:reading config file /home/user/.local/share/puddletag/actions/action_shortcuts [2022-08-05 09:40:22,844]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:40:22,845]DEBUG:reading config file /home/user/.local/share/puddletag/actions/standard.action [2022-08-05 09:40:22,849]DEBUG:reading config file /home/user/.local/share/puddletag/actions/caseconversion.action [2022-08-05 09:40:22,861]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:40:22,861]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:40:22,863]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:40:22,864]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:40:22,864]DEBUG:reading config file /home/user/.config/puddletag/gensettings [2022-08-05 09:40:22,864]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:40:22,864]DEBUG:reading config file /home/user/.config/puddletag/gensettings [2022-08-05 09:40:22,864]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:40:22,865]DEBUG:reading config file /home/user/.config/puddletag/tagpanel [2022-08-05 09:40:22,873]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:40:22,873]DEBUG:reading config file /home/user/.config/puddletag/gensettings [2022-08-05 09:40:22,874]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:40:22,874]DEBUG:reading config file /home/user/.config/puddletag/tagsources.conf [2022-08-05 09:40:22,876]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:40:22,877]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:40:22,885]DEBUG:reading config file /home/user/.config/puddletag/confirmations [2022-08-05 09:40:22,885]DEBUG:reading config file /home/user/.config/puddletag/user_shortcuts [2022-08-05 09:40:22,886]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:40:22,896]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:40:22,896]DEBUG:reading config file /home/user/.config/puddletag/gensettings [2022-08-05 09:41:15,990]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:41:16,009]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:41:16,010]DEBUG:reading config file /home/user/.config/puddletag/combos [2022-08-05 09:41:16,011]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:41:16,011]DEBUG:reading config file /home/user/.config/puddletag/tagsources.conf [2022-08-05 09:41:16,014]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:41:16,015]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:41:16,015]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf [2022-08-05 09:41:16,016]DEBUG:reading config file /home/user/.config/puddletag/puddletag.conf > >please also be aware of >https://github.com/puddletag/puddletag/issues/725#issuecomment-1162469701 Yes, I am aware of this specific bug you mentioned, as I have noticed it with some of my albums, as well. I do not think my specific bug can be related to an API account and key, but who knows. I do not have Discogs.com account. Regards, Bartek
Bug#1016636: puddletag: An error occurs while retriving metatags from Discogs.com
Package: puddletag Version: 2.2.0-1 Severity: normal Tags: upstream X-Debbugs-Cc: poem...@gmail.com Dear Maintainer, * What led up to the situation? Retrieving meta-tags from Discogs.com. * What exactly did you do (or not do) that was effective (or ineffective)? Searching for tags for any available album using Discogs.com release id. * What was the outcome of this action? Message reads: "An error occured: local variable '__reference_time' referenced before assignment". * What outcome did you expect instead? Meta-tags for a specific album release. -- System Information: Debian Release: bookworm/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.19.0-xanmod1-x64v2 (SMP w/4 CPU threads) Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to C.UTF-8), LANGUAGE=C.UTF-8 Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages puddletag depends on: ii libjs-sphinxdoc 4.5.0-4 ii python3 3.10.5-3 ii python3-acoustid1.2.2-1 ii python3-audioread 2.1.9-2 ii python3-certifi 2020.6.20-1 ii python3-charset-normalizer 2.0.6-2 ii python3-configobj 5.0.6-5 ii python3-idna3.3-1 ii python3-lxml4.9.1-1+b1 ii python3-mutagen 1.45.1-3 ii python3-pyparsing 3.0.7-2 ii python3-pyqt5 5.15.7+dfsg-1 ii python3-pyqt5.qtsvg 5.15.7+dfsg-1 ii python3-pyqt5.sip 12.11.0-1+b1 ii python3-requests2.27.1+dfsg-1 ii python3-six 1.16.0-4 ii python3-urllib3 1.26.9-1 Versions of packages puddletag recommends: ii libchromaprint-tools 1.5.1-2+b1 ii python3-levenshtein 0.12.2-2+b2 Versions of packages puddletag suggests: pn quodlibet -- no debconf information
Bug#997906: cardpeek: libcacard0 missing in dependencies
Subject: cardpeek: libcacard0 missing in dependencies Package: cardpeek X-Debbugs-Cc: deb...@baszerr.eu Version: 0.8.4-1.1 Severity: important Tags: patch Dear Maintainer, package is missing dependency to libcacard0. because of this it is not possible to read cards at least with "Alcor Micro Corp. AU9540" smartcard reader (USB id: 058f:9540). manually installing above dependency solves the issue. -- System Information: Debian Release: 11.1 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.10.0-9-amd64 (SMP w/8 CPU threads) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages cardpeek depends on: pn cardpeek-data ii libc6 2.31-13+deb11u2 ii libcairo2 1.16.0-5 ii libcurl4 7.74.0-1.3+b1 ii libgdk-pixbuf-2.0-0 2.42.2+dfsg-1 ii libglib2.0-0 2.66.8-1 ii libgtk-3-0 3.24.24-4 ii liblua5.2-0 5.2.4-1.1+b3 ii libpango-1.0-0 1.46.2-3 ii libpcsclite1 1.9.1-1 ii libreadline8 8.1-1 ii libssl1.1 1.1.1k-1+deb11u1 cardpeek recommends no packages. Versions of packages cardpeek suggests: ii pcscd 1.9.1-1 -- pozdrawiam serdecznie / best regards, bartek 'basz' szurgot /* https://baszerr.eu */ /* https://baszerr.eu/misc/pgp.txt */ OpenPGP_signature Description: OpenPGP digital signature
Bug#992627: dino-im: Dino-im crashes with GLib error
Package: dino-im Version: 0.2.1+git20210607.ce292d0-1 Severity: important Tags: upstream X-Debbugs-Cc: poem...@gmail.com Dear Maintainer, * What led up to the situation? Running dino-im from experimental repo causes program to not run at all. * What exactly did you do (or not do) that was effective (or ineffective)? Starting dino-im from terminal. * What was the outcome of this action? Error message: ~/ dino-im ** (dino-im:658781): CRITICAL **: 13:45:21.898: table.vala:174: Qlite Error: Add columns for version: SQLite error: 1 - duplicate column name: encryption (dino-im:658781): libdino-WARNING **: 13:45:47.014: notifications.vala:25: Couldn't get org.freedesktop.Notifications DBus instance: Error calling StartServiceByName for org.freedesktop.Notifications: Timeout was reached (dino-im:658781): GLib-CRITICAL **: 13:45:47.887: g_bytes_get_data: assertion 'bytes != NULL' failed (dino-im:658781): GLib-CRITICAL **: 13:45:47.887: g_bytes_ref: assertion 'bytes != NULL' failed (dino-im:658781): GLib-CRITICAL **: 13:45:47.887: g_bytes_get_data: assertion 'bytes != NULL' failed ** GLib:ERROR:../../../glib/gvariant- serialiser.c:1360:g_variant_serialised_n_children: assertion failed: (g_variant_serialised_check (serialised)) Bail out! GLib:ERROR:../../../glib/gvariant- serialiser.c:1360:g_variant_serialised_n_children: assertion failed: (g_variant_serialised_check (serialised)) zsh: abort dino-im * What outcome did you expect instead? Dino-im fully working. -- System Information: Debian Release: 11.0 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.13.12-xanmod1-edge (SMP w/8 CPU threads; PREEMPT) Kernel taint flags: TAINT_WARN Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to C.UTF-8), LANGUAGE=C.UTF-8 Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages dino-im depends on: ii dino-im-common 0.2.1+git20210607.ce292d0-1 ii libc6 2.31-16 ii libcairo2 1.16.0-5 ii libgcc-s1 11.2.0-2 ii libgcrypt20 1.8.7-6 ii libgdk-pixbuf-2.0-0 2.42.6+dfsg-2 ii libgee-0.8-20.20.4-1 ii libglib2.0-02.68.4-1 ii libgnutls30 3.7.1-5 ii libgpg-error0 1.42-2 ii libgpgme11 1.14.0-1+b2 ii libgspell-1-2 1.8.4-1 ii libgstreamer-plugins-base1.0-0 1.18.4-2 ii libgstreamer1.0-0 1.18.4-2.1 ii libgtk-3-0 3.24.30-1 ii libicu6767.1-7 ii libnice10 0.1.18-1 ii libpango-1.0-0 1.46.2-3 ii libqrencode44.1.1-1 ii libsignal-protocol-c2.3.2 2.3.3-1 ii libsoup2.4-12.72.0-4 ii libsqlite3-03.34.1-3 ii libsrtp2-1 2.3.0-5 ii libstdc++6 11.2.0-2 ii libwebrtc-audio-processing1 0.3-1+b1 Versions of packages dino-im recommends: ii ca-certificates 20210119 ii dbus1.12.20-2 ii fonts-noto-color-emoji 2.028-1 ii network-manager 1.30.6-1 dino-im suggests no packages.
Bug#980837: icewm-common: Icewm crashes and/or doesn't start when Infadel2 theme is selected as default.
Package: icewm-common Version: 2.0.0-2 Severity: normal Dear Maintainer, IceWM does not start neither through any used display manager, ie.: LightDM, SDDM nor using startx command. A default theme was set to Infadel2 in $HOME/.icewm/theme. I tested it with each of it available options: default, Ergonomic and Overloaded. After changing the theme in the mentioned file to any other in menu IceWM runs. Question: can the bug be related to: icewm (2.0.0-2) unstable; urgency=low * Disable direct loaders except for Imlib2 and librsvg * Dropped libgdx-pixbuf-2.0 dependency (its xlib support is deprecated) I rather use this theme as I find the best of available in the package. Best regards, Bartek -- System Information: Debian Release: bullseye/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.10.8-xanmod1 (SMP w/4 CPU threads; PREEMPT) Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to C.UTF-8), LANGUAGE=C.UTF-8 Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages icewm-common depends on: ii libc6 2.31-9 ii libgcc-s1 10.2.1-6 ii libglib2.0-02.66.4-1 ii libstdc++6 10.2.1-6 ii sensible-utils 0.0.14 Versions of packages icewm-common recommends: ii menu 2.1.48 ii xscreensaver 5.45+dfsg1-1 ii xterm 363-1 icewm-common suggests no packages. -- no debconf information
Bug#966826: RFS: libmobi/0.6-1 [ITP] -- Tools for handling Mobipocket/Kindle ebook format documents
Package: sponsorship-requests Severity: wishlist Dear mentors, I am looking for a sponsor for my package "libmobi": * Package name: libmobi Version : 0.6-1 Upstream Author : Bartek Fabiszewski * URL : https://github.com/bfabiszewski/libmobi * License : LGPL-3+ * Vcs : https://salsa.debian.org/bfabiszewski/libmobi Section : libs It builds those binary packages: libmobi0-tools - Tools for handling Mobipocket/Kindle ebook format documents libmobi0 - C library for handling Mobipocket/Kindle ebook format documents libmobi-dev - Development files for libmobi To access further information about this package, please visit the following URL: https://mentors.debian.net/package/libmobi/ Alternatively, one can download the package with dget using this command: dget -x https://mentors.debian.net/debian/pool/main/libm/libmobi/libmobi_0.6-1.dsc Changes since the last upload: libmobi (0.6-1) unstable; urgency=medium . * Initial release. (Closes: #966677) Regards, Bartek Fabiszewski
Bug#966677: ITP: libmobi -- C library for handling Mobipocket/Kindle ebook format documents
Package: wnpp Severity: wishlist Owner: Bartek Fabiszewski * Package name: libmobi Version : 0.6 Upstream Author : Bartek Fabiszewski * URL : https://github.com/bfabiszewski/libmobi * License : LGPL Programming Lang: C Description : C library for handling Mobipocket/Kindle ebook format document The library handles .prc, .mobi, .azw; .azw3, .azw4, some .pdb documents. It allows one to read and parse documents, recreate source files of ebook documents and dictionaries. It is also possible to edit document's metadata. It handles encrypted files. The package also contains tools: - mobitool allows one to extract resources, decompile, analyze and convert documents; - mobimeta allows one to edit document's metadata. I am the author of the library. I've prepared debian packages for the library and its tools. I don't know any other libraries providing this functionality. I plan to maintain the package myself. I will need help from a sponsor.
Bug#866805: [Pkg-php-pecl] Bug#866805: php-imagick causes apache2 to crash and unable to run Owncloud
On Sat, 1 Jul 2017 at 23:05, Ondřej Surý wrote: > > Hi Bartek, > > do you have php-gmagick installed? If yes, please uninstall it. > > Otherwise a full gdb backtrace would be needed. Install a > php-imagick-dbgsym package and collect a coredump. Ondrej, indeed I had php-gmagick installed. After removing it seems to be working fine with php-imagick. If you don't hear from me in next few days consider this resolved. BUT - why php-gmagick influences php-imagick in this way? Should those packages be marked conflicting? Regards -- Bartek Krawczyk
Bug#868179: xserver-xorg-video-radeon: SEGV when starting X11
On 08/07/2018 11:21 AM, Simon McVittie wrote: > On Sat, 15 Jul 2017 at 12:13:34 +0900, Michel Dänzer wrote: >> On 15/07/17 03:57 AM, bartek 'basz' szurgot wrote: >>> knowing the exact conditions under which SEGV occurs >>> (i.e. rotated screen in xorg.conf), i agree it is not a "grave" bug. >> It's even more specific than that: The crash only happens if xorg.conf >> contains rotation and a Virtual stanza (which BTW is probably useless in >> this case anyway). > Downgrading to important based on this reasoning, and retitling to be more > specific. +1 >>> when the fix is expected to arrive to the xserver-xorg-video-radeon >>> package in Debian-testing? >> I have to defer to the Debian packagers on that. Upstream it'll likely >> only be in the 7.10.0 release. > The 18.0.1 release (xserver-xorg-video-ati/1:18.0.1-1) is now available in > Debian testing and unstable. bartek, does that resolve this crash for you? i works stable for me for quite some time now. recently there was short time when i had to downgrade driver again: /apt-get install xserver-xorg-video-radeon=1:7.8.0-1+b1 xserver-xorg-core=2:1.19.2-1+deb9u2/ to make 2nd screen operational. but before i managed to find time to report, it got back to normal. today i've upgraded and everything works fine with: xserver-xorg-core 2:1.20.1-1 amd64 xserver-xorg-video-radeon 1:18.0.1-2 amd64 i think we can close the ticket. -- pozdrawiam serdecznie / best regards, bartek 'basz' szurgot /* https://www.baszerr.eu */ /* https://www.baszerr.eu/misc/pgp.txt */ signature.asc Description: OpenPGP digital signature
Bug#877721: racoon: IPsec tunnel with HMAC SHA256 in phase 2 is not working correctly
And below you see a working strongSwan configuration with HMAC SHA256 tested on the same server also on Debian stretch with the same PSK conn VPN left=217.182.74.61 leftsubnet=4.4.4.4/32[gre] rightsubnet=2.2.2.2/32[gre] rightauth=psk leftauth=psk authby=psk auto=add dpdaction=restart dpddelay=30s dpdtimeout=120s ike=aes128-sha256-modp3072! esp=aes128-sha256-modp3072! ikelifetime=24h lifetime=4h installpolicy=yes keyexchange=ikev1 type=tunnel Regards Bartek Krawczyk
Bug#877721: racoon: IPsec tunnel with HMAC SHA256 in phase 2 is not working correctly
Package: racoon Version: 1:0.8.2+20140711-8 Severity: normal Dear Maintainer, I am configuring a roadwarrior-like scenario which works however I've encounterd a strange problem. When configuring racoon to use AES 128 CBC as encryption algorithm with SHA256 as authentication algorighm (and PFS with DH group 2048) for SA proposal the traffic is not correctly authenticated. The phase 1 and 2 completes successfully, SA's are installed properly and I even see encrypted traffic leaving the box (and arriving to it) with correct SPI's however looks like the traffic is dropped both by my Linux server and my remote MikroTik router. Issue goes away immediately when I change to SHA1 as an authentication algorithm in racoon for SA proposal. I have tested the same setup on the same server with strongSwan and there SHA256 works fine. If you need any more information let me know with some minor advice on how to gather them. In summary: 1. racoon configuration with aes128-cbc, sha256 and pfs2048 doesn't work with MikroTik. 2. changing only sha256 to sha1 on racoon and MikroTik solves the problem immediately. 3. MikroTik to MikroTik and MikroTik to strongSwan works as expected. 4. PSK is fine, phase 1 and 2 completes properly, setkey -D and setkey -DP shows expected values but packets are dropped. -- System Information: Debian Release: 9.1 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 4.9.0-3-amd64 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages racoon depends on: ii adduser3.115 ii debconf [debconf-2.0] 1.5.61 ii init-system-helpers1.48 ii ipsec-tools1:0.8.2+20140711-8 ii libc6 2.24-11+deb9u1 ii libcomerr2 1.43.4-2 ii libgssapi-krb5-2 1.15-1 ii libk5crypto3 1.15-1 ii libkrb5-3 1.15-1 ii libldap-2.4-2 2.4.44+dfsg-5 ii libpam0g 1.1.8-3.6 ii libssl1.0.21.0.2l-2 ii lsb-base 9.20161125 ii perl 5.24.1-3+deb9u2 racoon recommends no packages. racoon suggests no packages. -- Configuration Files: /etc/racoon/psk.txt changed: * xxx /etc/racoon/racoon.conf changed: log info; path pre_shared_key "/etc/racoon/psk.txt"; path certificate "/etc/racoon/certs"; listen { isakmp 217.182.74.61 [500]; isakmp_natt 217.182.74.61 [4500]; } remote anonymous { exchange_mode main,aggressive,base; my_identifier address; lifetime time 24 hour; passive on; proposal_check obey; generate_policy require; nat_traversal on; dpd_delay 120; dpd_retry 5; dpd_maxfail 5; proposal { encryption_algorithm aes; hash_algorithm sha256; authentication_method pre_shared_key; dh_group modp3072; } } sainfo anonymous { lifetime time 4 hours; pfs_group modp3072; encryption_algorithm aes; authentication_algorithm hmac_sha1; compression_algorithm deflate; } -- debconf information: * racoon/config_mode: direct
Bug#868179: xserver-xorg-video-radeon: SEGV when starting X11
On 07/14/2017 04:04 AM, Michel Dänzer wrote: > Indeed, my bad. The corresponding radeon commit is > https://cgit.freedesktop.org/xorg/driver/xf86-video-ati/commit/?id=4c91f36d3058180b5a2d6a23e9b82f5c933d8716 ok - thanks. :) knowing the exact conditions under which SEGV occurs (i.e. rotated screen in xorg.conf), i agree it is not a "grave" bug. when the fix is expected to arrive to the xserver-xorg-video-radeon package in Debian-testing? -- pozdrawiam serdecznie / best regards, bartek 'basz' szurgot /* https://www.baszerr.eu */ /* https://www.baszerr.eu/lib/exe/fetch.php/about_me/basz_pub_key.txt */ signature.asc Description: OpenPGP digital signature
Bug#868179: xserver-xorg-video-radeon: SEGV when starting X11
On 07/13/2017 04:43 AM, Michel Dänzer wrote: > This bug is https://bugs.freedesktop.org/show_bug.cgi?id=100276 , fixed > by > https://cgit.freedesktop.org/xorg/driver/xf86-video-amdgpu/commit/?id=981bac185cfd74ae50dffc28f57cf34623a9595f thanks for the prompt reply! :) this bug is reported against video-radeon, while linked one is about video-amdgpu. is the affected code base common for both drivers? -- pozdrawiam serdecznie / best regards, bartek 'basz' szurgot /* https://www.baszerr.eu */ /* https://www.baszerr.eu/lib/exe/fetch.php/about_me/basz_pub_key.txt */ signature.asc Description: OpenPGP digital signature
Bug#868179: Acknowledgement (xserver-xorg-video-radeon: SEGV when starting X11)
might be related to: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=867701 -- pozdrawiam serdecznie / best regards, bartek 'basz' szurgot /* https://www.baszerr.eu */ /* https://www.baszerr.eu/lib/exe/fetch.php/about_me/basz_pub_key.txt */ signature.asc Description: OpenPGP digital signature
Bug#868179: xserver-xorg-video-radeon: SEGV when starting X11
Subject: xserver-xorg-video-radeon: SEGV when starting X11 Package: xserver-xorg-video-radeon Version: 1:7.9.0-1 Justification: renders package unusable Severity: grave Dear Maintainer, when starting X11 got SEGV (looks like null pointer dereference). downgrading package to 7.8.0 fixes the problem. -- Package-specific info: /etc/X11/X does not exist. /etc/X11/X is not a symlink. /etc/X11/X is not executable. Diversions concerning libGL are in place diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1.2.0 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1.2.0 by glx-diversions diversion of /usr/lib/libGL.so.1 to /usr/lib/mesa-diverted/libGL.so.1 by glx-diversions diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so.2.0.0 by glx-diversions diversion of /usr/lib/libGLESv2.so.2 to /usr/lib/mesa-diverted/libGLESv2.so.2 by glx-diversions diversion of /usr/lib/arm-linux-gnueabihf/libGL.so to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so by glx-diversions diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so.1.1.0 by glx-diversions diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so by glx-diversions diversion of /usr/lib/i386-linux-gnu/libGLESv2.so.2 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so.2 by glx-diversions diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so.2 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2 by glx-diversions diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1.2 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1.2 by glx-diversions diversion of /usr/lib/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/libGLESv1_CM.so.1.1.0 by glx-diversions diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so.1 by glx-diversions diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so by glx-diversions diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so.1.1.0 by glx-diversions diversion of /usr/lib/libGL.so.1.2.0 to /usr/lib/mesa-diverted/libGL.so.1.2.0 by glx-diversions diversion of /usr/lib/libGLESv2.so to /usr/lib/mesa-diverted/libGLESv2.so by glx-diversions diversion of /usr/lib/libGL.so.1.2 to /usr/lib/mesa-diverted/libGL.so.1.2 by glx-diversions diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so.1.1.0 by glx-diversions diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2.0 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2.0 by glx-diversions diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so by glx-diversions diversion of /usr/lib/libGL.so to /usr/lib/mesa-diverted/libGL.so by glx-diversions diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so.2 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so.2 by glx-diversions diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2 by glx-diversions diversion of /usr/lib/i386-linux-gnu/libGLESv2.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so by glx-diversions diversion of /usr/lib/libGLESv1_CM.so to /usr/lib/mesa-diverted/libGLESv1_CM.so by glx-diversions diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2.0 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2.0 by glx-diversions diversion of /usr/lib/i386-linux-gnu/libGL.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so by glx-diversions diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1 by glx-diversions diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1 by glx-diversions diversion of /usr/lib/i386-linux-gnu/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so.2.0.0 by glx-diversions diversion of /usr/lib/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/libGLESv1_CM.so.1 by glx-diversions diversion of /usr/lib/x86_64-linux-gnu/libGL.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so by glx-diversions diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2.0.0 by glx-diversions diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so by glx-diversions diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so.1 by glx-diversions diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so.1 by glx-diversions diversion of /usr/lib/libGLESv2.so.2.0.0 to
Bug#866805: php-imagick causes apache2 to crash and unable to run Owncloud
Package: php-imagick Version: 3.4.3~rc2-2 Severity: normal Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? * What exactly did you do (or not do) that was effective (or ineffective)? * What was the outcome of this action? * What outcome did you expect instead? *** End of the template - remove these template lines *** After upgrading from Jessie to Stretch I was unable to run Owncloud 10.0.2. Apache Error Log has been filling with: [Sat Jul 01 21:46:42.954804 2017] [core:notice] [pid 3350] AH00094: Command line: '/usr/sbin/apache2' *** Error in `/usr/sbin/apache2': free(): invalid next size (fast): 0x559e347a8410 *** === Backtrace: = /lib/x86_64-linux-gnu/libc.so.6(+0x70bcb)[0x7f7a4c0d1bcb] /lib/x86_64-linux-gnu/libc.so.6(+0x76f96)[0x7f7a4c0d7f96] /lib/x86_64-linux-gnu/libc.so.6(+0x777de)[0x7f7a4c0d87de] /lib/x86_64-linux-gnu/libc.so.6(+0x79a4f)[0x7f7a4c0daa4f] /lib/x86_64-linux-gnu/libc.so.6(+0x7b32f)[0x7f7a4c0dc32f] /lib/x86_64-linux-gnu/libc.so.6(posix_memalign+0x3f)[0x7f7a4c0ddfbf] /usr/lib/x86_64-linux-gnu/libMagickCore-6.Q16.so.3(AllocateSemaphoreInfo+0x28)[0x7f7a386f2e88] /usr/lib/x86_64-linux-gnu/libMagickCore-6.Q16.so.3(NewLinkedList+0x60)[0x7f7a3866b470] /usr/lib/x86_64-linux-gnu/libMagickCore-6.Q16.so.3(+0xf5932)[0x7f7a38647932] /usr/lib/x86_64-linux-gnu/libMagickCore-6.Q16.so.3(AcquireExceptionInfo+0x20)[0x7f7a38647c50] /usr/lib/x86_64-linux-gnu/libMagickCore-6.Q16.so.3(IsEventLogging+0x2d)[0x7f7a386855ed] /usr/lib/x86_64-linux-gnu/libMagickCore-6.Q16.so.3(LogMagickEventList+0x24)[0x7f7a386857e4] /usr/lib/x86_64-linux-gnu/libMagickCore-6.Q16.so.3(LogMagickEvent+0x85)[0x7f7a386858b5] /usr/lib/x86_64-linux-gnu/libMagickCore-6.Q16.so.3(+0x13a8ba)[0x7f7a3868c8ba] /usr/lib/x86_64-linux-gnu/libMagickCore-6.Q16.so.3(+0x13ae36)[0x7f7a3868ce36] /usr/lib/x86_64-linux-gnu/libMagickCore-6.Q16.so.3(OpenModules+0x71)[0x7f7a3868dcb1] /usr/lib/x86_64-linux-gnu/libMagickCore-6.Q16.so.3(GetMagickInfo+0x1b0)[0x7f7a38688610] /usr/lib/x86_64-linux-gnu/libMagickCore-6.Q16.so.3(GetMagickList+0x68)[0x7f7a38688d68] /usr/lib/x86_64-linux-gnu/libMagickWand-6.Q16.so.3(MagickQueryFormats+0x20)[0x7f7a38acbb90] /usr/lib/php/20151012/imagick.so(zim_imagick_queryformats+0x66)[0x7f7a38d72836] /usr/lib/apache2/modules/libphp7.0.so(+0x2e792e)[0x7f7a48e1e92e] /usr/lib/apache2/modules/libphp7.0.so(execute_ex+0x1b)[0x7f7a48dd903b] /usr/lib/apache2/modules/libphp7.0.so(zend_call_function+0x818)[0x7f7a48d89088] /usr/lib/apache2/modules/libphp7.0.so(zif_call_user_func+0xb5)[0x7f7a48cd3dd5] /usr/lib/apache2/modules/libphp7.0.so(+0x2e6e4d)[0x7f7a48e1de4d] /usr/lib/apache2/modules/libphp7.0.so(execute_ex+0x1b)[0x7f7a48dd903b] /usr/lib/apache2/modules/libphp7.0.so(zend_execute+0x1a7)[0x7f7a48e2d9c7] /usr/lib/apache2/modules/libphp7.0.so(zend_execute_scripts+0xd3)[0x7f7a48d984d3] /usr/lib/apache2/modules/libphp7.0.so(php_execute_script+0x2d0)[0x7f7a48d373a0] /usr/lib/apache2/modules/libphp7.0.so(+0x2f832a)[0x7f7a48e2f32a] /usr/sbin/apache2(ap_run_handler+0x40)[0x559e337d38c0] /usr/sbin/apache2(ap_invoke_handler+0xc6)[0x559e337d3e56] /usr/sbin/apache2(ap_process_async_request+0x363)[0x559e337eba53] /usr/sbin/apache2(ap_process_request+0x10)[0x559e337ebb60] /usr/sbin/apache2(+0x6bc1d)[0x559e337e7c1d] /usr/sbin/apache2(ap_run_process_connection+0x40)[0x559e337dd6f0] /usr/lib/apache2/modules/mod_mpm_prefork.so(+0x36bf)[0x7f7a493866bf] /usr/lib/apache2/modules/mod_mpm_prefork.so(+0x3944)[0x7f7a49386944] /usr/lib/apache2/modules/mod_mpm_prefork.so(+0x480d)[0x7f7a4938780d] /usr/sbin/apache2(ap_run_mpm+0x4e)[0x559e337b6e4e] /usr/sbin/apache2(main+0x9dd)[0x559e337afa8d] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf1)[0x7f7a4c0812b1] /usr/sbin/apache2(_start+0x2a)[0x559e337afbca] === Memory map: (truncated) and Owncloud was not able to display list of my files. After removing php-imagick package apache runs normal and Owncloud works - unfortunately it's not every feature is supported now. -- System Information: Debian Release: 9.0 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 4.9.0-3-amd64 (SMP w/4 CPU cores) Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8), LANGUAGE=pl_PL.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages php-imagick depends on: ii libapache2-mod-php7.0 [phpapi-20151012] 7.0.19-1 ii libc62.24-11+deb9u1 ii libmagickcore-6.q16-38:6.9.7.4+dfsg-11 ii libmagickwand-6.q16-38:6.9.7.4+dfsg-11 ii php-common 1:49 ii php7.0-cli [phpapi-20151012] 7.0.19-1 Versions of packages php-imagick recommends: ii ghostscript 9.20~dfsg-3.2 ii ttf-dejavu-core 2.37-1 php-imagick suggests no packages. -- no debconf information
Bug#864936: yagv: segmentation fault on startup
Subject: yagv: segmentation fault on startup Package: yagv Version: 0.4~20130422.r5bd15ed+dfsg-1 Justification: renders package unusable Severity: grave Dear Maintainer, starting yagv with any G-code file (random example attached) causes it to SEGV, right after displaying rendering window. console output from a run: Yet Another GCode Viewer v0.4 loading file '3d_cube.gcode' ... Parsing '3d_cube.gcode'... [WARN] Line 10: Unknown code 'M107' (Text:'M107') [WARN] Line 11: G28 unimplemented (Text:'G28 ; home all axes') [WARN] Line 13: Unknown code 'M190' (Text:'M190 S70 ; bed temp') [WARN] Line 14: Unknown code 'M104' (Text:'M104 S210 ; noozle temp') [WARN] Line 17: Unknown code 'M82' (Text:'M82 ; use absolute distances for extrusion') [WARN] Line 164: Unknown code 'M106' (Text:'M106 S252.45') [WARN] Line 165: Unknown code 'M104' (Text:'M104 S200 ; set temperature') [WARN] Line 334: Unknown code 'M106' (Text:'M106 S255') [WARN] Line 356: Unknown code 'M106' (Text:'M106 S255') [WARN] Line 470: Unknown code 'M106' (Text:'M106 S255') [WARN] Line 4281: Unknown code 'M106' (Text:'M106 S255') [WARN] Line 4395: Unknown code 'M106' (Text:'M106 S255') [WARN] Line 4396: Unknown code 'M106' (Text:'M106 S252.45') [WARN] Line 4567: Unknown code 'M106' (Text:'M106 S229.5') [WARN] Line 4740: Unknown code 'M107' (Text:'M107') [WARN] Line 4741: Unknown code 'M104' (Text:'M104 S0 ; turn off temperature') [WARN] Line 4742: Unknown code 'M140' (Text:'M140 S0 ; turn off heatbed') [WARN] Line 4743: G28 unimplemented (Text:'G28 X0 ; home X axis') [WARN] Line 4744: Unknown code 'M84' (Text:'M84 ; disable motors') Done! > rendering vertices... end renderColors in 2.908 ms rendering indexed colors... end renderIndexedColors in 1.075 ms rendering true colors... end renderColors in 5.870 ms generating graphics... end generateGraphics in 57.268 ms Done loaded file in 144.799 ms Segmentation fault -- System Information: Debian Release: 9.0 APT prefers testing-proposed-updates APT policy: (500, 'testing-proposed-updates'), (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.9.0-3-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages yagv depends on: ii python 2.7.13-2 ii python-pyglet 1.1.4.dfsg-3 yagv recommends no packages. yagv suggests no packages. -- no debconf information -- pozdrawiam serdecznie / best regards, bartek 'basz' szurgot /* https://www.baszerr.eu */ /* https://www.baszerr.eu/lib/exe/fetch.php/about_me/basz_pub_key.txt */ 3d_cube.tar.bz2 Description: Binary data signature.asc Description: OpenPGP digital signature
Bug#803670: gwenview: missing dependency to plasma-workspace and kinit
Package: gwenview Version: 4:15.08.2-1 Severity: important Dear Maintainer, after recent upgrade of gwenview from gwenview_4%3a4.14.2-1_amd64.deb to gwenview_4%3a15.08.0-1_amd64.deb and onwards it stoped working properly. it started, but was unable to show files or browse directories, showing access errors to 'file:///', most of the time. installing 'plasma-workspace' and 'kinit' solved all issues. please add these two packages to dependencies (needed for those who do not use KDE itself). -- System Information: Debian Release: stretch/sid APT prefers testing APT policy: (500, 'testing'), (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.2.0-1-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages gwenview depends on: ii libc6 2.19-22 ii libexiv2-14 0.25-2.1 ii libgcc1 1:5.2.1-22 ii libjpeg62-turbo 1:1.4.1-2 ii libkf5activities5 5.15.0-1 ii libkf5baloo55.15.0+-1 ii libkf5completion5 5.15.0-1 ii libkf5configcore5 5.15.0-1 ii libkf5configgui55.15.0-1 ii libkf5configwidgets55.15.0-1 ii libkf5coreaddons5 5.15.0-1 ii libkf5filemetadata3 5.15.0-1 ii libkf5i18n5 5.15.0-1 ii libkf5iconthemes5 5.15.0-1 ii libkf5itemmodels5 5.15.0-1 ii libkf5itemviews55.15.0-1 ii libkf5jobwidgets5 5.15.0-1 ii libkf5kdelibs4support5 5.15.0-1 ii libkf5kiocore5 5.15.0-1 ii libkf5kiofilewidgets5 5.15.0-1 ii libkf5kiowidgets5 5.15.0-1 ii libkf5notifications55.15.0-1 ii libkf5parts55.15.0-1 ii libkf5service-bin 5.15.0+-1 ii libkf5service5 5.15.0+-1 ii libkf5textwidgets5 5.15.0-1 ii libkf5widgetsaddons55.15.0-1 ii libkf5xmlgui5 5.15.0-1 ii liblcms2-2 2.6-3+b3 ii libphonon4qt5-4 4:4.8.3-2 ii libpng12-0 1.2.50-2+b2 ii libqt5core5a5.5.1+dfsg-5 ii libqt5gui5 5.5.1+dfsg-5 ii libqt5opengl5 5.5.1+dfsg-5 ii libqt5printsupport5 5.5.1+dfsg-5 ii libqt5svg5 5.5.1-2 ii libqt5widgets5 5.5.1+dfsg-5 ii libqt5x11extras55.5.1-3 ii libstdc++6 5.2.1-22 ii libx11-62:1.6.3-1 ii phonon4qt5 4:4.8.3-2 Versions of packages gwenview recommends: ii kamera 4:4.14.2-1+b1 ii kio-extras 4:15.08.2-1 ii qt5-image-formats-plugins 5.5.1-2 gwenview suggests no packages. -- no debconf information -- pozdrawiam serdecznie / best regards, bartek 'basz' szurgot /* http://www.baszerr.eu */ /* http://www.baszerr.eu/lib/exe/fetch.php/about_me/basz_pub_key.txt */ signature.asc Description: OpenPGP digital signature
Bug#803671: kwrite: missing dependency to kinit
Package: kwrite Version: 4:15.08.2-1 Severity: important Dear Maintainer, after recent upgrade from kwrite_4%3a4.14.2-2_amd64.deb to kwrite_4%3a15.08.0-1_amd64.deb (and onwards) spell-checking did not worked and saving files under a new name was not possible. it turned out installing 'kinit' package (i'm not using KDE itself) fixed the problem. adding this missing dependency should solve some isses for non-KDE users of kwrite (and kate?). -- System Information: Debian Release: stretch/sid APT prefers testing APT policy: (500, 'testing'), (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.2.0-1-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages kwrite depends on: ii ktexteditor-katepart 5.15.0-1 ii libc6 2.19-22 ii libkf5activities5 5.15.0-1 ii libkf5configcore5 5.15.0-1 ii libkf5configgui5 5.15.0-1 ii libkf5configwidgets5 5.15.0-1 ii libkf5coreaddons5 5.15.0-1 ii libkf5dbusaddons5 5.15.0-1 ii libkf5i18n5 5.15.0-1 ii libkf5jobwidgets5 5.15.0-1 ii libkf5kiocore55.15.0-1 ii libkf5parts5 5.15.0-1 ii libkf5texteditor5 5.15.0-1 ii libkf5widgetsaddons5 5.15.0-1 ii libkf5xmlgui5 5.15.0-1 ii libqt5core5a 5.5.1+dfsg-5 ii libqt5gui55.5.1+dfsg-5 ii libqt5widgets55.5.1+dfsg-5 ii libstdc++65.2.1-22 kwrite recommends no packages. kwrite suggests no packages. -- no debconf information -- pozdrawiam serdecznie / best regards, bartek 'basz' szurgot /* http://www.baszerr.eu */ /* http://www.baszerr.eu/lib/exe/fetch.php/about_me/basz_pub_key.txt */ signature.asc Description: OpenPGP digital signature
Bug#798675: openscad: package has broken dependecies
Source: openscad Version: 2014.03+dfsg-1 Severity: grave Justification: renders package unusable Dear Maintainer, after recent dist-upgrade package has been automatically unistalled, due to unmet dependencies. i'm unable to install it ever since. when trying to install console output is: # apt-get install openscad Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libgd3 : Depends: libvpx2 (>= 1.4.0) but it is not going to be installed libstdc++6 : Breaks: openscad (<= 2014.03+dfsg-1+b1) but 2014.03+dfsg-1 is to be installed libwxgtk3.0-0v5 : Depends: libsdl1.2debian (>= 1.2.11) but it is not going to be installed openscad : Depends: libboost-filesystem1.55.0 but it is not going to be installed Depends: libboost-regex1.55.0 but it is not going to be installed Depends: libboost-system1.55.0 but it is not going to be installed Depends: libboost-thread1.55.0 but it is not going to be installed Depends: libcgal10 but it is not going to be installed Depends: libglu1-mesa but it is not going to be installed or libglu1 Depends: libqt4-opengl (>= 4:4.5.3) but it is not going to be installed Depends: libqtcore4 (>= 4:4.8.0) but it is not going to be installed Depends: libqtgui4 (>= 4:4.7.0~beta1) but it is not going to be installed E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. -- System Information: Debian Release: stretch/sid APT prefers testing APT policy: (500, 'testing'), (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.1.0-2-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) -- pozdrawiam serdecznie / best regards, bartek 'basz' szurgot /* http://www.baszerr.eu */ /* http://www.baszerr.eu/lib/exe/fetch.php/about_me/basz_pub_key.txt */ signature.asc Description: OpenPGP digital signature
Bug#798700: slic3r: GUI does not work due to too old threads.pm
Package: slic3r Version: 1.2.9+dfsg-2 Severity: important Dear Maintainer, when running slic3r in GUI mode error is reported and program quits. console output: $ slic3r --gui threads.pm >= 1.96 is required, please update Base class package "Wx::GLCanvas" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /usr/bin/lib /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/x86_64-linux-gnu/perl5/5.20 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl .). at /usr/share/perl5/Slic3r/GUI/Plater/2DToolpaths.pm line 121. BEGIN failed--compilation aborted at /usr/share/perl5/Slic3r/GUI/Plater/2DToolpaths.pm line 121. Compilation failed in require at /usr/share/perl5/Slic3r/GUI.pm line 16. BEGIN failed--compilation aborted at /usr/share/perl5/Slic3r/GUI.pm line 16. Compilation failed in require at (eval 64) line 1. command line more seems to work fine. -- System Information: Debian Release: stretch/sid APT prefers testing APT policy: (500, 'testing'), (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.1.0-2-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages slic3r depends on: ii libboost-geometry-utils-perl 0.15-2+b2 ii libc6 2.19-19 ii libencode-locale-perl 1.03-1 ii libgcc11:5.2.1-16 ii libio-stringy-perl 2.110-5 ii libmath-convexhull-monotonechain-perl 0.1-1+b2 ii libmath-geometry-voronoi-perl 1.3-2+b2 ii libmath-planepath-perl 120-1 ii libmoo-perl2.01-3 ii libstdc++6 5.2.1-16 pn libstorable-perl ii perl [libtime-hires-perl] 5.20.2-6 ii perl-base [perlapi-5.20.2] 5.20.2-6 ii perl-modules [libfile-spec-perl] 5.20.2-6 Versions of packages slic3r recommends: ii libclass-xsaccessor-perl 1.19-2+b4 ii libio-all-perl0.86-2 ii libopengl-perl0.6704+dfsg-2 ii libpdf-api2-perl 2.023-1 ii libsvg-perl 2.64-1 pn libwx-glcanvas-perl ii libwx-perl1:0.9923-4+b1 ii libxml-sax-expatxs-perl 1.33-2 slic3r suggests no packages. -- no debconf information -- pozdrawiam serdecznie / best regards, bartek 'basz' szurgot /* http://www.baszerr.eu */ /* http://www.baszerr.eu/lib/exe/fetch.php/about_me/basz_pub_key.txt */ signature.asc Description: OpenPGP digital signature
Bug#784903: [Pkg-fglrx-devel] Bug#784903: fglrx-driver: broken depends on xorg-video-abi-18
On Fri, 15 May 2015 14:50:22 +0200 Michael Tatge michael.ta...@web.de wrote: * On Tue, May 12, 2015 07:51PM +0200 Patrick Matthäi (pmatth...@debian.org) wrote: I will check in the next days if the experimental 14.12 version is compatible with it, but I do not think so. It seems it is not. Even amd say it's only compatible with Xorg up to 1.16. around the beginning of the July newer version of fglrx showed up - 15.5. i hope it solves X's ABI compatibility issue (this blocks far too many updates already...). even if it does not, it would be worth packaging any way - just to have an up to date driver installed. -- pozdrawiam serdecznie / best regards, bartek 'basz' szurgot /* http://www.baszerr.eu */ /* http://www.baszerr.eu/lib/exe/fetch.php/about_me/basz_pub_key.txt */ signature.asc Description: OpenPGP digital signature
Bug#775438: all is ok now after update kernel
kernel updated to linux (3.2.68-1+deb7u2) wheezy-security; urgency=high all works fine now... -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#775438: pptpd gre read from network failed
Package: pptpd server version ; pptpd v1.3.4 client win7 pro When i want to connect to PPTPD every twenty times i can else otherwise i cant NAS (pptpd ) --- cross cable --- PC (win7) NAS (without firewall or nat, simply default install and install pptpd) pptpd config #debug #stimeout 10 #noipparam logwtmp #bcrelay eth1 localip10.0.0.1 remoteip--10.0.0.2-20 tail -f /var/log/syslog Jan 15 18:49:44 nas pptpd[11166]: CTRL: Client 192.168.1.40 control connection started Jan 15 18:49:44 nas pptpd[11166]: CTRL: Starting call (launching pppd, opening GRE) Jan 15 18:49:44 nas pppd[11167]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Jan 15 18:49:44 nas pppd[11167]: pppd 2.4.5 started by root, uid 0 Jan 15 18:49:44 nas pppd[11167]: Using interface ppp0 Jan 15 18:49:44 nas pppd[11167]: Connect: ppp0 -- /dev/pts/1 Jan 15 18:49:44 nas pptpd[11166]: GRE: Bad checksum from pppd. Jan 15 18:49:44 nas pptpd[11166]: GRE: read(fd=7,buffer=8057680,len=8260) from network failed: status = -1 error = Protocol not available Jan 15 18:49:44 nas pptpd[11166]: CTRL: GRE read or PTY write failed (gre,pty)=(7,6) Jan 15 18:49:44 nas pppd[11167]: Modem hangup Jan 15 18:49:44 nas pptpd[11166]: CTRL: Reaping child PPP[11167] Jan 15 18:49:44 nas pppd[11167]: Connection terminated. Jan 15 18:49:44 nas avahi-daemon[2820]: Withdrawing workstation service for ppp0. Jan 15 18:49:44 nas pppd[11167]: Exit. Jan 15 18:49:44 nas pptpd[11166]: CTRL: Client 192.168.1.40 control connection finished Jan 15 18:50:01 nas /USR/SBIN/CRON[11236]: (root) CMD (/etc/webmin/sysstats/sysstats.pl) I im sure that problem isnt in LAN Linux nas 3.2.0-4-686-pae #1 SMP Debian 3.2.65-1+deb7u1 i686 GNU/Linux -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#775438: log from console
when im able to connect Jan 15 19:05:01 nas /USR/SBIN/CRON[11756]: (root) CMD (/etc/webmin/sysstats/sysstats.pl) Jan 15 19:05:05 nas pptpd[11775]: CTRL: Client 192.168.1.40 control connection started Jan 15 19:05:05 nas pptpd[11775]: CTRL: Starting call (launching pppd, opening GRE) Jan 15 19:05:05 nas pppd[11776]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Jan 15 19:05:05 nas pppd[11776]: pppd 2.4.5 started by root, uid 0 Jan 15 19:05:05 nas pppd[11776]: Using interface ppp0 Jan 15 19:05:05 nas pppd[11776]: Connect: ppp0 -- /dev/pts/1 Jan 15 19:05:05 nas pptpd[11775]: GRE: Bad checksum from pppd. Jan 15 19:05:05 nas pppd[11776]: peer from calling number 192.168.1.40 authorized Jan 15 19:05:05 nas pptpd[11775]: CTRL: Ignored a SET LINK INFO packet with real ACCMs! Jan 15 19:05:05 nas pppd[11776]: MPPE 128-bit stateless compression enabled Jan 15 19:05:07 nas pppd[11776]: Cannot determine ethernet address for proxy ARP Jan 15 19:05:07 nas pppd[11776]: local IP address 10.0.0.1 Jan 15 19:05:07 nas pppd[11776]: remote IP address 10.0.0.2 sth going wrong and i get Jan 15 19:06:34 nas pptpd[11775]: GRE: read(fd=7,buffer=8057680,len=8260) from network failed: status = -1 error = Protocol not available Jan 15 19:06:34 nas pptpd[11775]: CTRL: GRE read or PTY write failed (gre,pty)=(7,6) Jan 15 19:06:34 nas pptpd[11775]: CTRL: Reaping child PPP[11776] Jan 15 19:06:34 nas pppd[11776]: Modem hangup Jan 15 19:06:34 nas pppd[11776]: Connect time 1.5 minutes. Jan 15 19:06:34 nas pppd[11776]: Sent 1380 bytes, received 25400 bytes. Jan 15 19:06:34 nas pppd[11776]: MPPE disabled Jan 15 19:06:34 nas pppd[11776]: Connection terminated. Jan 15 19:06:34 nas avahi-daemon[2820]: Withdrawing workstation service for ppp0. Jan 15 19:06:34 nas pppd[11776]: Hangup (SIGHUP) Jan 15 19:06:34 nas pppd[11776]: Exit. Jan 15 19:06:34 nas pptpd[11775]: CTRL: Client 192.168.1.40 control connection finished -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#753090: [mpv] refuses to work
Package: mpv Version: 0.4.0-1 Severity: normal Hi, When trying to open any multimedia file mpv gives an error: mpv -vvv --msg-level=all=trace any_multimedia.file [cplayer] mpv 0.4.0 (C) 2000-2014 mpv/MPlayer/mplayer2 projects [cplayer] built on 2014-06-25T19:12:56 [cplayer] libav library versions: [cplayer]libavutil 53.3.0 [cplayer]libavcodec 55.34.1 [cplayer]libavformat 55.12.0 [cplayer]libswscale 2.1.2 (runtime 2.1.100) [cplayer]libavfilter 4.2.0 [cplayer]libavresample 1.1.0 [cplayer] mpv was compiled and linked against a mixture of Libav and FFmpeg versions. This won't work and will most likely crash at some +point. Exiting. --- System information. --- Architecture: amd64 Kernel: Linux 3.15-trunk-amd64 Debian Release: jessie/sid 500 unstablerepozytorium.mati75.eu 500 unstableftp.uk.debian.org 500 unstableftp.heanet.ie 500 experimentalmozilla.debian.net 100 experimentalrepozytorium.mati75.eu 1 experimentalftp.uk.debian.org 1 experimentalftp.heanet.ie --- Package information. --- Depends(Version) | Installed -+- libasound2 (= 1.0.16) | 1.0.27.2-4 libass4 (= 0.10.1) | 0.10.1-3 libavcodec55 (= 6:10~beta1~) | OR libavcodec-extra-55 (= 6:10.1) | 6:10.2-1 libavdevice54 (= 6:10~beta1~) | 6:10.2-1 libavfilter4(= 6:10~beta1~) | 6:10.2-1 libavformat55 (= 6:10~beta1~) | 6:10.2-1 libavresample1 (= 6:10~beta1~) | 6:10.2-1 libavutil53 (= 6:10~beta1~) | 6:10.2-1 libbluray1 (= 1:0.4.0) | 1:0.6.0+dfsg-2 libbs2b0 | 3.1.0+dfsg-2 libc6 (= 2.16) | 2.19-4 libdvdnav4(= 4.1.3) | 4.2.1-3 libdvdread4 (= 4.1.3) | 4.2.1-2 libegl1-mesa (= 7.8.1) | 10.2.1-2 OR libegl1-x11 | libenca0(= 1.9) | 1.15-2 libgl1-mesa-glx | 10.2.1-2 OR libgl1 | libguess1| 1.2~git20131128.cc43cefc-1 libjack-jackd2-0 (= 1.9.5~dfsg-14) | 1.9.10+20140610git97e0e80b~dfsg-1 OR libjack-0.116| libjpeg8 (= 8c) | 8d-2 liblcms2-2 (= 2.6) | 2.6-3 liblircclient0 | 0.9.0~pre1-1 liblua5.2-0 | 5.2.3-1 libmpg123-0 (= 1.13.7) | 1.18.0-1 libncurses5 (= 5.5-5~) | 5.9+20140118-1 libpulse0(= 0.99.1) | 5.0-2 libquvi7 (= 0.4.0) | 0.4.1-2.1 libsdl2-2.0-0 (= 2.0.0) | 2.0.2+dfsg1-4 libswscale2 (= 6:10~beta1~) | 7:0.10.3-dmo1 libtinfo5| 5.9+20140118-1 libuuid1 (= 2.16) | 2.20.1-5.8 libva-glx1 | 1.3.1-3 libva-x11-1 ( 1.3.0~) | 1.3.1-3 libva1 ( 1.3.0~) | 1.3.1-3 libvdpau1 (= 0.2) | 0.7-2 libwayland-client0 (= 1.3.92) | 1.5.0-1 libwayland-cursor0(= 1.0.2) | 1.5.0-1 libwayland-egl1-mesa(= 10.0.2) | 10.2.1-2 OR libwayland-egl1 | libx11-6 | 2:1.6.2-2 libxext6 | 2:1.3.2-1 libxinerama1 | 2:1.1.3-1 libxkbcommon0 (= 0.2.0) | 0.4.0-1 libxss1 | 1:1.2.2-1 libxv1 | 2:1.0.10-1 libxxf86vm1 | 1:1.1.3-1 zlib1g (= 1:1.1.4) | 1:1.2.8.dfsg-1 Package's Recommends field is empty. Package's Suggests field is empty. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#753090: [mpv] refuses to work
2014-06-29 11:46 GMT+01:00 Alessandro Ghedini gh...@debian.org: On dom, giu 29, 2014 at 08:45:57 +0100, Bartek wrote: Package: mpv Version: 0.4.0-1 Severity: normal Hi, When trying to open any multimedia file mpv gives an error: mpv -vvv --msg-level=all=trace any_multimedia.file [cplayer] mpv 0.4.0 (C) 2000-2014 mpv/MPlayer/mplayer2 projects [cplayer] built on 2014-06-25T19:12:56 [cplayer] libav library versions: [cplayer]libavutil 53.3.0 [cplayer]libavcodec 55.34.1 [cplayer]libavformat 55.12.0 [cplayer]libswscale 2.1.2 (runtime 2.1.100) This libswscale version doesn't come from Debian... libswscale2 (= 6:10~beta1~) | 7:0.10.3-dmo1 As I suspected, this comes from deb-multimedia... please install the official Debian version and try again. Cheers Hi Alessandro, You are right, that was the problem, sorry to bother :). Thank you, Bartek -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#690000: guake lacks python-xdg as a dependency.
Package: guake Version: 0.4.3-2 Severity: important After running apt-get install guake it doesn't start saying: bartek@purple:~$ guake Traceback (most recent call last): File /usr/bin/guake, line 35, in module from xdg.DesktopEntry import DesktopEntry ImportError: No module named xdg.DesktopEntry after doing apt-get install python-xdg manually, everything is OK. It seems that guake lacks having python-xdg as a dependency. -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-3-amd64 (SMP w/4 CPU cores) Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages guake depends on: ii gconf2 3.2.5-1+build1 ii libatk1.0-0 2.4.0-2 ii libc62.13-35 ii libcairo21.12.2-2 ii libfontconfig1 2.9.0-7 ii libfreetype6 2.4.9-1 ii libgdk-pixbuf2.0-0 2.26.1-1 ii libglib2.0-0 2.32.3-1 ii libgtk2.0-0 2.24.10-2 ii libpango1.0-01.30.0-1 ii libpython2.7 2.7.3~rc2-2.1 ii libx11-6 2:1.5.0-1 ii notification-daemon 0.7.5-1 ii python 2.7.3~rc2-1 ii python-dbus 1.1.1-1 ii python-gconf 2.28.1+dfsg-1 ii python-glade22.24.0-3 ii python-notify0.1.1-3 ii python-vte 1:0.28.2-5 ii python2.72.7.3~rc2-2.1 ii xfce4-notifyd [notification-daemon] 0.2.2-2 guake recommends no packages. guake suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#671707: isc-dhcp-client: dhclient problem get ip address
Package: isc-dhcp-client Version: 4.1.1-P1-15+squeeze3 Severity: important have two KVM guest running on the same server. - first one - debian-squeeze with ics-dhcp-server - second one - debian-squeeze using ics-dhcp-client Looks like there is problem to get ip address from dhcp server. dhclient reporting 5 bad udp checksums in 5 packets.. I found following information about that issue: http://www.mail-archive.com/kvm@vger.kernel.org/msg41958.html http://docs.cloudstack.org/Knowledge_Base/Debian-based_VMs_have_problems_acquiring_DHCP_address https://bugs.launchpad.net/ubuntu/+source/isc-dhcp/+bug/930962 http://lwn.net/Articles/396466/ dhclient syslog: May 4 10:35:22 up1 dhclient: 5 bad udp checksums in 5 packets May 4 10:35:25 up1 dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 May 4 10:35:37 up1 dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 May 4 10:35:42 up1 dhclient: DHCPREQUEST on eth1 to 255.255.255.255 port 67 May 4 10:35:52 up1 dhclient: DHCPREQUEST on eth1 to 255.255.255.255 port 67 May 4 10:35:52 up1 dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 May 4 10:36:07 up1 dhclient: DHCPREQUEST on eth1 to 255.255.255.255 port 67 May 4 10:36:12 up1 dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 May 4 10:36:21 up1 dhclient: DHCPREQUEST on eth1 to 255.255.255.255 port 67 May 4 10:36:28 up1 dhclient: DHCPREQUEST on eth1 to 255.255.255.255 port 67 May 4 10:36:28 up1 dhclient: 5 bad udp checksums in 5 packets May 4 10:36:32 up1 dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 May 4 10:36:40 up1 dhclient: DHCPREQUEST on eth1 to 255.255.255.255 port 67 May 4 10:36:43 up1 dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 May 4 10:36:50 up1 dhclient: DHCPREQUEST on eth1 to 255.255.255.255 port 67 May 4 10:36:56 up1 dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 May 4 10:37:06 up1 dhclient: DHCPREQUEST on eth1 to 255.255.255.255 port 67 May 4 10:37:07 up1 dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 May 4 10:37:16 up1 dhclient: DHCPREQUEST on eth1 to 255.255.255.255 port 67 May 4 10:37:18 up1 dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 May 4 10:37:29 up1 dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 May 4 10:37:35 up1 dhclient: DHCPREQUEST on eth1 to 255.255.255.255 port 67 May 4 10:37:35 up1 dhclient: 5 bad udp checksums in 5 packets May 4 10:37:48 up1 dhclient: DHCPREQUEST on eth1 to 255.255.255.255 port 67 May 4 10:37:49 up1 dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 May 4 10:38:07 up1 dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 May 4 10:38:07 up1 dhclient: DHCPREQUEST on eth1 to 255.255.255.255 port 67 May 4 10:38:26 up1 dhclient: DHCPREQUEST on eth1 to 255.255.255.255 port 67 May 4 10:38:28 up1 dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 May 4 10:38:39 up1 dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 May 4 10:38:45 up1 dhclient: DHCPREQUEST on eth1 to 255.255.255.255 port 67 May 4 10:38:50 up1 dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 dhcp server: May 4 10:35:06 dhcp dhcpd: DHCPREQUEST for 100.100.100.31 from 52:54:00:00:00:31 via eth0 May 4 10:35:06 dhcp dhcpd: DHCPACK on 100.100.100.31 to 52:54:00:00:00:31 via eth0 May 4 10:35:09 dhcp dhcpd: DHCPREQUEST for 192.168.2.31 from 52:54:00:00:20:31 via eth1 May 4 10:35:09 dhcp dhcpd: DHCPACK on 192.168.2.31 to 52:54:00:00:20:31 via eth1 May 4 10:35:13 dhcp dhcpd: DHCPREQUEST for 100.100.100.31 from 52:54:00:00:00:31 via eth0 May 4 10:35:13 dhcp dhcpd: DHCPACK on 100.100.100.31 to 52:54:00:00:00:31 via eth0 May 4 10:35:21 dhcp dhcpd: DHCPREQUEST for 192.168.2.31 from 52:54:00:00:20:31 via eth1 May 4 10:35:21 dhcp dhcpd: DHCPACK on 192.168.2.31 to 52:54:00:00:20:31 via eth1 May 4 10:35:24 dhcp dhcpd: DHCPREQUEST for 100.100.100.31 from 52:54:00:00:00:31 via eth0 May 4 10:35:24 dhcp dhcpd: DHCPACK on 100.100.100.31 to 52:54:00:00:00:31 via eth0 May 4 10:35:36 dhcp dhcpd: DHCPREQUEST for 100.100.100.31 from 52:54:00:00:00:31 via eth0 May 4 10:35:36 dhcp dhcpd: DHCPACK on 100.100.100.31 to 52:54:00:00:00:31 via eth0 May 4 10:35:41 dhcp dhcpd: DHCPREQUEST for 192.168.2.31 from 52:54:00:00:20:31 via eth1 May 4 10:35:41 dhcp dhcpd: DHCPACK on 192.168.2.31 to 52:54:00:00:20:31 via eth1 May 4 10:35:51 dhcp dhcpd: DHCPREQUEST for 192.168.2.31 from 52:54:00:00:20:31 via eth1 May 4 10:35:51 dhcp dhcpd: DHCPACK on 192.168.2.31 to 52:54:00:00:20:31 via eth1 May 4 10:35:51 dhcp dhcpd: DHCPREQUEST for 100.100.100.31 from 52:54:00:00:00:31 via eth0 May 4 10:35:51 dhcp dhcpd: DHCPACK on 100.100.100.31 to 52:54:00:00:00:31 via eth0 May 4 10:36:06 dhcp dhcpd: DHCPREQUEST for 192.168.2.31 from 52:54:00:00:20:31 via eth1 May 4 10:36:06 dhcp dhcpd: DHCPACK on 192.168.2.31 to 52:54:00:00:20:31 via eth1 May 4 10:36:11 dhcp dhcpd: DHCPREQUEST for 100.100.100.31 from 52:54:00:00:00:31 via eth0 May 4 10:36:11 dhcp dhcpd: DHCPACK on
Bug#657490: php5: I'm getting unexpected seg. faults:
Package: php5 Version: 5.3.3-7+squeeze3 Severity: important Im getting unexpected seg. fault - it's really hard to reproduce that bug [Thu Jan 26 06:50:58 2012] [notice] child pid 26966 exit signal Segmentation fault (11), possible coredump in /var/cache/apache2 [Thu Jan 26 06:50:58 2012] [notice] child pid 27310 exit signal Segmentation fault (11), possible coredump in /var/cache/apache2 [Thu Jan 26 06:50:59 2012] [notice] child pid 27311 exit signal Segmentation fault (11), possible coredump in /var/cache/apache2 /usr/local/bin/gdb /usr/sbin/apache2 /var/cache/apache2/core GNU gdb (GDB) 7.4 Copyright (C) 2012 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type show copying and show warranty for details. This GDB was configured as x86_64-unknown-linux-gnu. For bug reporting instructions, please see: http://www.gnu.org/software/gdb/bugs/... Reading symbols from /usr/sbin/apache2...(no debugging symbols found)...done. [New LWP 27324] warning: Can't read pathname for load map: Input/output error. [Thread debugging using libthread_db enabled] Using host libthread_db library /lib/libthread_db.so.1. Core was generated by `/usr/sbin/apache2 -k start'. Program terminated with signal 11, Segmentation fault. #0 0x7f086dc9857d in do_bind_function () from /usr/lib/apache2/modules/libphp5.so (gdb) thread apply all bt full Thread 1 (Thread 0x7f087146a740 (LWP 27324)): #0 0x7f086dc9857d in do_bind_function () from /usr/lib/apache2/modules/libphp5.so No symbol table info available. #1 0x7f086dcdb10c in ?? () from /usr/lib/apache2/modules/libphp5.so No symbol table info available. #2 0x7f086dcdaea0 in execute () from /usr/lib/apache2/modules/libphp5.so No symbol table info available. #3 0x7f08660dc116 in ?? () from /usr/lib/php5/20090626/suhosin.so No symbol table info available. #4 0x7f086dce6b5f in ?? () from /usr/lib/apache2/modules/libphp5.so No symbol table info available. #5 0x7f086dcdaea0 in execute () from /usr/lib/apache2/modules/libphp5.so No symbol table info available. #6 0x7f08660dc116 in ?? () from /usr/lib/php5/20090626/suhosin.so No symbol table info available. #7 0x7f086dd03916 in ?? () from /usr/lib/apache2/modules/libphp5.so No symbol table info available. #8 0x7f086dcdaea0 in execute () from /usr/lib/apache2/modules/libphp5.so No symbol table info available. #9 0x7f08660dc116 in ?? () from /usr/lib/php5/20090626/suhosin.so No symbol table info available. #10 0x7f086dd03916 in ?? () from /usr/lib/apache2/modules/libphp5.so No symbol table info available. #11 0x7f086dcdaea0 in execute () from /usr/lib/apache2/modules/libphp5.so No symbol table info available. #12 0x7f08660dc116 in ?? () from /usr/lib/php5/20090626/suhosin.so No symbol table info available. #13 0x7f086dce6b5f in ?? () from /usr/lib/apache2/modules/libphp5.so No symbol table info available. #14 0x7f086dcdaea0 in execute () from /usr/lib/apache2/modules/libphp5.so No symbol table info available. #15 0x7f08660dc116 in ?? () from /usr/lib/php5/20090626/suhosin.so No symbol table info available. #16 0x7f086dd03916 in ?? () from /usr/lib/apache2/modules/libphp5.so No symbol table info available. #17 0x7f086dcdaea0 in execute () from /usr/lib/apache2/modules/libphp5.so No symbol table info available. #18 0x7f08660dc116 in ?? () from /usr/lib/php5/20090626/suhosin.so No symbol table info available. #19 0x7f086dd03916 in ?? () from /usr/lib/apache2/modules/libphp5.so No symbol table info available. #20 0x7f086dcdaea0 in execute () from /usr/lib/apache2/modules/libphp5.so No symbol table info available. #21 0x7f08660dc116 in ?? () from /usr/lib/php5/20090626/suhosin.so No symbol table info available. #22 0x7f086dce6b5f in ?? () from /usr/lib/apache2/modules/libphp5.so No symbol table info available. #23 0x7f086dcdaea0 in execute () from /usr/lib/apache2/modules/libphp5.so No symbol table info available. #24 0x7f08660dc116 in ?? () from /usr/lib/php5/20090626/suhosin.so No symbol table info available. #25 0x7f086dd03916 in ?? () from /usr/lib/apache2/modules/libphp5.so No symbol table info available. #26 0x7f086dcdaea0 in execute () from /usr/lib/apache2/modules/libphp5.so No symbol table info available. ---Type return to continue, or q return to quit--- #27 0x7f08660dc116 in ?? () from /usr/lib/php5/20090626/suhosin.so No symbol table info available. #28 0x7f086dd03916 in ?? () from /usr/lib/apache2/modules/libphp5.so No symbol table info available. #29 0x7f086dcdaea0 in execute () from /usr/lib/apache2/modules/libphp5.so No symbol table info available. #30 0x7f08660dc116 in ?? () from /usr/lib/php5/20090626/suhosin.so No symbol table info available. #31 0x7f086dce6b5f in ?? () from
Bug#634962: Bug 634962
I have the same problem, below is error log for Horde (Options - Global Options - Personal Information): HORDE [error] [horde] DB Error: null value violates not-null constraint: INSERT INTO horde_tokens (token_address, token_id, token_t imestamp) VALUES ('MjE2MC4xODIuMjAx', NULL, 1313760611) [nativecode=1048 ** Column 'token_id' cannot be null] [pid 30581 on line 156 of /usr/s hare/horde3/lib/Horde/Token/sql.php] HORDE [debug] [horde] Required secret is invalid - potentially malicious request. [pid 30581 on line 176 of /usr/share/horde3/lib/ Horde/Notification.php] and the same is for IMP4 options: HORDE [error] [imp] DB Error: null value violates not-null constraint: INSERT INTO horde_tokens (token_address, token_id, token_tim estamp) VALUES ('MjEMC4xODIuMjAx', NULL, 1313760658) [nativecode=1048 ** Column 'token_id' cannot be null] [pid 30581 on line 156 of /usr/sha re/horde3/lib/Horde/Token/sql.php] HORDE [debug] [imp] Required secret is invalid - potentially malicious request. [pid 30581 on line 176 of /usr/share/horde3/lib/Ho rde/Notification.php] -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#632677: please disable ugly resize grip
+1 for that is there any way to disable this ugly resize-arrow? Also, gnome-terminal didn't respect my font settings and theme-colors as it did before upgrading to testing. -- Bartek Krawczyk JID: bbartlom...@jabster.pl GG: 2094683 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#624505: linux-image-2.6.38-2-amd64: easycap.ko module not enabled
Package: linux-2.6 Version: 2.6.38-3 Severity: wishlist Tags: upstream please include easycap.ko (staging) driver as a module in kernel. -- Package-specific info: ** Version: Linux version 2.6.38-2-amd64 (Debian 2.6.38-3) (b...@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 04:28:07 UTC 2011 ** Command line: root=/dev/mapper/sda2_crypt ro ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 29.436244] ACPI: AC Adapter [ADP1] (on-line) [ 29.511338] wmi: Mapper loaded [ 29.619054] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 29.820219] ACPI: Battery Slot [BAT1] (battery present) [ 30.130248] cfg80211: Calling CRDA to update world regulatory domain [ 30.204421] [drm] Initialized drm 1.1.0 20060810 [ 30.575955] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008/0x0 [ 30.649195] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 30.698296] i801_smbus :00:1f.3: PCI INT C - GSI 18 (level, low) - IRQ 18 [ 30.924998] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 30.925084] iwlagn: Copyright(c) 2003-2010 Intel Corporation [ 30.925246] iwlagn :05:00.0: PCI INT A - GSI 19 (level, low) - IRQ 19 [ 30.925317] iwlagn :05:00.0: setting latency timer to 64 [ 30.925348] iwlagn :05:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 30.935224] i915 :00:02.0: PCI INT A - GSI 16 (level, low) - IRQ 16 [ 30.935337] i915 :00:02.0: setting latency timer to 64 [ 30.948570] iwlagn :05:00.0: device EEPROM VER=0x11f, CALIB=0x4 [ 30.948637] iwlagn :05:00.0: Device SKU: 0Xb [ 30.948925] iwlagn :05:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 30.949087] iwlagn :05:00.0: irq 45 for MSI/MSI-X [ 30.974485] mtrr: type mismatch for d000,1000 old: write-back new: write-combining [ 30.974566] [drm] MTRR allocation failed. Graphics performance may suffer. [ 30.975042] i915 :00:02.0: irq 46 for MSI/MSI-X [ 30.975049] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 30.975112] [drm] Driver supports precise vblank timestamp query. [ 31.055124] vgaarb: device changed decodes: PCI::00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 31.055537] fixme: max PWM is zero. [ 31.256986] iwlagn :05:00.0: loaded firmware version 8.83.5.1 build 33692 [ 31.451081] Console: switching to colour frame buffer device 160x50 [ 31.454061] fb0: inteldrmfb frame buffer device [ 31.454085] drm: registered panic notifier [ 31.461984] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 31.477419] acpi device:28: registered as cooling_device2 [ 31.478011] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 31.478172] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 31.478564] [drm] Initialized i915 1.6.0 20080730 for :00:02.0 on minor 0 [ 31.635249] Linux video capture interface: v2.00 [ 31.706700] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0203) [ 31.710243] input: BisonCam, NB Pro as /devices/pci:00/:00:1a.7/usb1/1-2/1-2:1.0/input/input9 [ 31.710437] usbcore: registered new interface driver uvcvideo [ 31.710470] USB Video Class driver (v1.0.0) [ 31.730680] HDA Intel :00:1b.0: PCI INT A - GSI 22 (level, low) - IRQ 22 [ 31.730802] HDA Intel :00:1b.0: irq 47 for MSI/MSI-X [ 31.730835] HDA Intel :00:1b.0: setting latency timer to 64 [ 32.041818] hda_codec: ALC888: BIOS auto-probing. [ 32.041853] hda_codec: ALC888: SKU not ready 0x598301f0 [ 32.043097] input: HDA Digital PCBeep as /devices/pci:00/:00:1b.0/input/input10 [ 32.120633] input: HDA Intel Headphone as /devices/pci:00/:00:1b.0/sound/card0/input11 [ 34.263060] EXT3-fs (dm-0): using internal journal [ 34.490912] loop: module loaded [ 35.194151] fuse init (API version 7.16) [ 35.391503] EXT3-fs: barriers not enabled [ 35.393515] kjournald starting. Commit interval 5 seconds [ 35.393827] EXT3-fs (sda1): using internal journal [ 35.393831] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 62.896090] usb 4-2: USB disconnect, address 2 [ 64.376057] usb 4-2: new low speed USB device using uhci_hcd and address 3 [ 64.554217] usb 4-2: New USB device found, idVendor=093a, idProduct=2510 [ 64.555874] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 64.557491] usb 4-2: Product: USB OPTICAL MOUSE [ 64.559057] usb 4-2: Manufacturer: PIXART [ 64.587563] input: PIXART USB OPTICAL MOUSE as /devices/pci:00/:00:1a.1/usb4/4-2/4-2:1.0/input/input12 [ 64.589286] generic-usb 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-:00:1a.1-2/input0 [ 83.484897] ip_tables: (C) 2000-2006 Netfilter Core Team [ 83.560385] nf_conntrack version 0.5.0 (16384 buckets, 65536
Bug#624505: linux-image-2.6.38-2-amd64: easycap.ko module not enabled
On 04/29/2011 01:01 PM, maximilian attems wrote: On Fri, Apr 29, 2011 at 08:10:11AM +0200, bartek szurgot wrote: Package: linux-2.6 Version: 2.6.38-3 Severity: wishlist Tags: upstream please include easycap.ko (staging) driver as a module in kernel. why do you need it or for what it may help you, might help to weight your request. This doesn't seem too much to ask for. regards hi, i bought device (i.e. usb frame grabber) that works with this driver. for now i have manually-compiled module for this that works fine, but in a long term i'd prefer to have this module in distribution kernel so i won't have to do this all over again each time new kernel arrives with dist-upgrade (i use debian/testing). since it is kernel part any way i think effort of adding this module is minimal and it's always nice if device works straight after plugging it in (this hardware is easily accessible, for a low price in my country). IMHO this update could appear along with next linux-image-2.6xxx package release. -- pozdrawiam serdecznie / best regards, bartek szurgot http://www.baszerr.org (public key: http://www.baszerr.org/lib/exe/fetch.php/about_me/basz_pub_key.txt) -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#624505: linux-image-2.6.38-2-amd64: easycap.ko module not enabled
On 04/29/2011 03:45 PM, maximilian attems wrote: On Fri, Apr 29, 2011 at 03:18:57PM +0200, bartek szurgot wrote: i bought device (i.e. usb frame grabber) that works with this driver. how about telling that in the *first* request. (: user Oops... ;) since it is kernel part any way i think effort of adding this module is minimal and it's always nice if device works straight after plugging it in (this hardware is easily accessible, for a low price in my country). well it comes for cost of us, as building is longer and security support is also different. If the module is built, one would expect such, well for staging crap we don't anyway. hope some time soon this driver will become The Driver. AFAIC it is being constantly developed, and from user's perspective looks quite mature. IMHO this update could appear along with next linux-image-2.6xxx package release. we do indeed enable staging crap on user request, so that we know that it is used. we do consider however to split off the non mainstream modules in a seperate modules to reduce size of the linux images and thus necessary installations. hmm... sounds reasonable. i'm thinking if it wouldn't be a bad idea to add all staging drivers as modules in one, separate package, with proper notes about security/support. this way we'd have core kernel+modules separated as a stable/supported part, while giving user an easy way to install any driver(s) that comes with the kernel, if he needs it, but explicit, so that he'd be aware of the possible consequences. -- pozdrawiam serdecznie / best regards, bartek szurgot http://www.baszerr.org (public key: http://www.baszerr.org/lib/exe/fetch.php/about_me/basz_pub_key.txt) -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#579264: tracker-miner-evolution bug
same thing here. tracker-status says: bartek@nc10:~/.config$ tracker-status Przechowalnia: ✓ Ponowne odtworzenie dziennik- Bezczynny Przeszukiwania: 6 % System plików - Processing… ✓ Programy- Bezczynny ✓ Wiadomości e-mail - Inicjowanie Which means e-mail messages are initializing. The tracker status icon show 100% unter e-mails but I can't search any emails. Evolution is running. Tracker plug-in is Enabled in Evolution. Regards -- Bartek Krawczyk GG: 2094683 http://pentaxian.pl -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#614281: tracker-gui: tracker-search-bar shows results on top of the screen instead near the panel it is put on.
Package: tracker-gui Version: 0.8.17-1 Severity: normal Hi, I have just setup tracker and put a tracker applet on my panel. I only use a bottom panel in gnome. The top panel is turned off. When I am starting to type in the applet the results are shown on top of the screen instead near the bottom panel and near the applet. It only happens when I am searching for the first time during the session or after being idle for a few minutes and then searching again. -- System Information: Debian Release: 6.0 APT prefers stable APT policy: (600, 'stable'), (500, 'squeeze-updates'), (500, 'testing'), (400, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores) Locale: LANG=pl_PL.utf8, LC_CTYPE=pl_PL.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages tracker-gui depends on: ii gnome-icon-theme 2.30.3-2 GNOME Desktop icon theme ii libatk1.0-01.30.0-1 The ATK accessibility toolkit ii libbonobo2-0 2.24.3-1 Bonobo CORBA interfaces library ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib ii libcairo2 1.8.10-6 The Cairo 2D vector graphics libra ii libdbus-1-31.2.24-4 simple interprocess messaging syst ii libdbus-glib-1-2 0.88-2.1 simple interprocess messaging syst ii libfontconfig1 2.8.0-2.1 generic font configuration library ii libfreetype6 2.4.2-2.1 FreeType 2 font engine, shared lib ii libgee20.5.2-1 GObject based collection library ii libglib2.0-0 2.24.2-1 The GLib library of C routines ii libgtk2.0-02.20.1-2 The GTK+ graphical user interface ii libnautilus-extension1 2.30.1-2 libraries for nautilus components ii libpanel-applet2-0 2.30.2-2 library for GNOME Panel applets ii libpango1.0-0 1.28.3-1+squeeze1 Layout and rendering of internatio ii libtracker-client-0.8- 0.8.17-1 metadata database, indexer and sea ii libtracker-miner-0.8-0 0.8.17-1 tracker data miner library ii libx11-6 2:1.3.3-4 X11 client-side library ii tracker0.8.17-1 metadata database, indexer and sea tracker-gui recommends no packages. tracker-gui suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#594462: MSI errors after linux-image-2.6.26-2-xen-amd64 update
Package: linux-image-2.6.26-2-xen-amd64 Version: 2.6.26-24lenny1 Severity: important Hello! I am running Xen with pciback. This is my kernel command line root=/dev/mapper/vg1-root ro console=tty0 pciback.permissive noirqdebug pciback.hide=(00:0a.0)(01:06.0) After last kernel package upgrade, the following errors appeared. Aug 25 19:30:39 debian kernel: [0.655321] PCI: Setting latency timer of device :00:10.0 to 64 Aug 25 19:30:39 debian kernel: [0.655582] assign_interrupt_mode Found MSI capability Aug 25 19:30:39 debian kernel: [0.655772] no ownder Aug 25 19:30:39 debian kernel: [0.655849] map irq failed Aug 25 19:30:39 debian kernel: [0.655928] Allocate Port Service[:00:10.0:pcie00] Aug 25 19:30:39 debian kernel: [0.659308] PCI: Setting latency timer of device :00:12.0 to 64 Aug 25 19:30:39 debian kernel: [0.659308] assign_interrupt_mode Found MSI capability Aug 25 19:30:39 debian kernel: [0.659308] no ownder Aug 25 19:30:39 debian kernel: [0.659308] map irq failed The system is unstable, resets especially when I load uvesafb. When uvesafb is loaded and I run DRBD the screen goes black. The same with pciback.hide enabled and without pciback at all. After starting Xen DomU with binded devices following errors appeared Aug 25 20:17:54 debian kernel: [ 87.927850] error enable msi for guest 1 status ffea Add pci=nomsi to kernel command line solves problem with msi errors, but still there is MSI error when booting DomU and I can not use uvesafb (system unstable, black screen after loading DRBD) Kernel without Xen support seems to work properly with uvesafb and DRBD. # lspci 00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP78S [GeForce 8200] LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1) 00:01.2 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1) 00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] Co-Processor (rev a2) 00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1) 00:06.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] IDE (rev a1) 00:08.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1) 00:09.0 SATA controller: nVidia Corporation MCP78S [GeForce 8200] AHCI Controller (rev a2) 00:0a.0 Ethernet controller: nVidia Corporation MCP78S [GeForce 8200] Ethernet (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1) 00:10.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1) 00:12.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1) 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 02:00.0 VGA compatible controller: nVidia Corporation GeForce 8200 (rev a2) Greetings Bartek -- System Information: Debian Release: 5.0.5 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-2-xen-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-2-xen-amd64 depends on: ii initramfs-tools 0.92o tools for generating an initramfs ii linux-modules-2.6.26-2-x 2.6.26-24lenny1 Linux 2.6.26 modules on AMD64 linux-image-2.6.26-2-xen-amd64 recommends no packages. Versions of packages linux-image-2.6.26-2-xen-amd64 suggests: ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 none(no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#576941: madison-lite: problem with regex option:
Package: madison-lite Version: 0.14 Severity: normal problem is with searching package using regex option: adison-lite -r vim Use of uninitialized value $ressource in hash element at /usr/bin/madison-lite line 733. Use of uninitialized value $ressource in hash element at /usr/bin/madison-lite line 733. [..] Use of uninitialized value $ressource in hash element at /usr/bin/madison-lite line 733. Use of uninitialized value $ressource in hash element at /usr/bin/madison-lite line 733. vim | 1:7.1.314-3+lenny2 |stable | alpha, arm, hppa, i386, ia64 -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.32-3-686 (SMP w/8 CPU cores) Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages madison-lite depends on: ii perl 5.10.1-11 Larry Wall's Practical Extraction Versions of packages madison-lite recommends: ii perl [libdigest-md5-perl] 5.10.1-11 Larry Wall's Practical Extraction Versions of packages madison-lite suggests: ii wget 1.12-1.1 retrieves files from the web -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#495551: aptitude: Aptitude prompts for unrecognised keys with Polish locales
Same thing here on Lenny 5.0.4 and aptitude 0.4.11.11 - either it should accept localized input or the options shouldn't be translated according to locale. Now it prompts for localized input but it accepts only English options. What's the status of this bug? Come on - it shouldn't be hard to fix and it lasts for quite a long time. I think it's easier to prompt for English options. ug-andrzejewo:/home/bartek# aptitude install apache2 Czytanie list pakietów... Gotowe Budowanie drzewa zależności Odczyt informacji o stanie... Gotowe Odczyt dodatkowych informacji o stanie Inicjalizacja stanów pakietów... Gotowe Odczyt opisów zadań... Gotowe Następujące NOWE pakiety zostaną zainstalowane: apache2 apache2-mpm-worker{a} apache2-utils{a} apache2.2-common{a} openssl-blacklist{a} ssl-cert{a} 0 pakietów aktualizowanych, 6 instalowanych, 0 do usunięcia i 0 nie aktualizowanych. Do pobrania 7564kB archiwów. Zajęte po rozpakowaniu: 17,1MB. Kontynuować? [T/n/?] T Nieprawidłowe polecenie. Proszę podać polecenie, lub ? dla uzyskania pomocy. Kontynuować? [T/n/?] ug-andrzejewo:/home/bartek# aptitude --version aptitude 0.4.11.11 skompilowany Dec 5 2008 02:43:34 Kompilator: g++ 4.3.2 Skompilowane względem: wersja apt 4.6.0 wersja NCurses 5.6 wersja libsigc++: 2.0.18 Obsługa ept włączona. Bieżące wersje bibliotek: wersja NCurses: ncurses 5.7.20081213 wersja cwidget: 0.5.12 wersja Apt: 4.6.0 ug-andrzejewo:/home/bartek# locale LANG=pl_PL.UTF-8 LC_CTYPE=pl_PL.UTF-8 LC_NUMERIC=pl_PL.UTF-8 LC_TIME=pl_PL.UTF-8 LC_COLLATE=pl_PL.UTF-8 LC_MONETARY=pl_PL.UTF-8 LC_MESSAGES=pl_PL.UTF-8 LC_PAPER=pl_PL.UTF-8 LC_NAME=pl_PL.UTF-8 LC_ADDRESS=pl_PL.UTF-8 LC_TELEPHONE=pl_PL.UTF-8 LC_MEASUREMENT=pl_PL.UTF-8 LC_IDENTIFICATION=pl_PL.UTF-8 LC_ALL= ug-andrzejewo:/home/bartek# Regards. -- Bartek Krawczyk GG: 2094683 JID: bkrawc...@jabberpl.org -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#545988: firebird2.0-server-common: Wrong security database name in Firebird 2.0.x
Package: firebird2.0-server-common Version: 2.0.4.13130-1.ds1-4 Severity: minor Firebird's security database located in /var/lib/firebird/2.0/system/security.fdb has a wrong name. In Firebird 2.0.x the database should be named firebird2.fdb due to changes betweent Firebird 1.5 and 2.0. There is also a symbolic link placed in /usr/lib/firebird/2.0 named security2.fdb and leading to /var/lib/firebird/2.0/system/security.fdb. Is there any particular reason for the wrong name? -- System Information: Debian Release: 5.0.3 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-686 (SMP w/2 CPU cores) Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages firebird2.0-server-common depends on: ii adduser 3.110 add and remove users and groups firebird2.0-server-common recommends no packages. firebird2.0-server-common suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#545988: #545988: firebird2.0-server-common: Wrong security database name in Firebird 2.0.x
Dnia 2009-09-10, czw o godzinie 17:44 +0300, Damyan Ivanov pisze: The symlink is there because firebird server and tools look for the security database relative to the 'FB_ROOT', which is /usr/lib/firebird/$VERSION on Debian. I don't mind the symlink - just wanted to point out that it does have a correct name. I don't udnerstand what is 'wrong' with the name. Does it cause any problems? No it doesn't :) That's why I submited it as a minor bug (advised by reportbug). But there ARE differences between security.fdb (Firebird 1.5) and security2.fdb (Firebird 2.0) so I thought it won't hurt to use correct name. -- Bartek Krawczyk http://bbartlomiej.digart.pl jid: bbartlom...@jabster.pl gg: 2094683 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#540506: hal cannot be configured
2009/8/9 Michael Biebl bi...@debian.org: Bartłomiej Gródek wrote: 10:30:37.091 [W] ids.c:301: Couldn't open pci.ids file '/usr/share/misc/pci.ids', errno=13: Permission denied This one is interesting. Could you send me the output of ls -la /usr/share/misc/ and debsums pciutils Thanks, Michael Here it is: ls -la /usr/share/misc/ total 1524 drwxr-xr-x 2 root root 4096 08-09 10:48 . drwxr-xr-x 274 root root 12288 08-04 16:10 .. -rwxr-xr-x 1 root root 45612 07-23 21:36 config.guess -rwxr-xr-x 1 root root 34069 07-23 21:36 config.sub lrwxrwxrwx 1 root root 13 05-09 14:53 magic - ../file/magic lrwxrwxrwx 1 root root 17 05-09 14:53 magic.mgc - ../file/magic.mgc lrwxrwxrwx 1 root root 18 05-09 14:53 magic.mime - ../file/magic.mime -rw--- 1 root root 616678 07-27 03:15 pci.ids -rw--- 1 root root 616678 07-27 03:15 pci.ids.old -rw-r--r-- 1 root root 205486 2008-07-21 units.dat lrwxrwxrwx 1 root root 25 08-02 13:18 usb.ids - /var/lib/usbutils/usb.ids debsums pciutils /usr/share/doc/pciutils/changelog.gz OK /usr/share/doc/pciutils/changelog.Debian.gz OK /usr/share/doc/pciutils/copyright OK /usr/share/doc/pciutils/README.gz OK /usr/share/doc/pciutils/TODO.Debian OK /usr/share/doc/pciutils/examples/example.cOK /usr/share/man/man8/lspci.8.gzOK /usr/share/man/man8/setpci.8.gz OK /usr/share/man/man8/update-pciids.8.gzOK /usr/share/man/man8/pcimodules.8.gz OK /usr/share/man/man7/pcilib.7.gz OK /usr/share/misc/pci.ids FAILED /usr/bin/lspciOK /usr/bin/setpci OK /usr/bin/pcimodules OK /usr/bin/update-pciidsOK Regards Bartek -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#540506: hal cannot be configured
2009/8/9 Michael Biebl bi...@debian.org: Ok, this definitely is not correct. hal runs with reduced privileges so a chmod 644 /usr/share/misc/pci.ids should fix this. Looks like a bug in pciutils. Does hal come up correctly after fixing the permissions? Cheers, Michael After changing permission as you suggested hal was configured correctly. Thanks Bartek -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#528820: rkhunter: Fails to install
2009/5/17 Julien Valroff jul...@kirya.net Le samedi 16 mai 2009 à 09:17 +0100, Bartek a écrit : 2009/5/16 Julien Valroff jul...@kirya.net Le vendredi 15 mai 2009 à 22:16 +0100, Bartlomiej Grodek a écrit : Package: rkhunter Version: 1.3.4-4 Severity: important Hi, rkhunter fails to install with the following information: Setting up rkhunter (1.3.4-4) ... [ Rootkit Hunter version 1.3.4 ] File updated: searched for 154 files, found 135, missing hashes 13 dpkg: error processing rkhunter (--configure): subprocess post-installation script returned error exit status 1 Errors were encountered while processing: rkhunter E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up rkhunter (1.3.4-4) ... [ Rootkit Hunter version 1.3.4 ] File updated: searched for 154 files, found 135, missing hashes 13 dpkg: error processing rkhunter (--configure): subprocess post-installation script returned error exit status 1 Errors were encountered while processing: rkhunter Can you confirm you use prelinking? Yes, I do. If so, try prelink -a and reconfigure rkhunter. Your solution has been working. Great, I now need to find something so that it does not prevent correct installation of the package. When installing, had you enabled the automatic database updates? Enabled is: 'rkhunter databases will be updated automatically by a weekly cron job'. Disabled is: 'The file properties database can be updated automatically by the package management system'' Best Regards Bartek
Bug#528820: rkhunter: Fails to install
2009/5/16 Julien Valroff jul...@kirya.net Le vendredi 15 mai 2009 à 22:16 +0100, Bartlomiej Grodek a écrit : Package: rkhunter Version: 1.3.4-4 Severity: important Hi, rkhunter fails to install with the following information: Setting up rkhunter (1.3.4-4) ... [ Rootkit Hunter version 1.3.4 ] File updated: searched for 154 files, found 135, missing hashes 13 dpkg: error processing rkhunter (--configure): subprocess post-installation script returned error exit status 1 Errors were encountered while processing: rkhunter E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up rkhunter (1.3.4-4) ... [ Rootkit Hunter version 1.3.4 ] File updated: searched for 154 files, found 135, missing hashes 13 dpkg: error processing rkhunter (--configure): subprocess post-installation script returned error exit status 1 Errors were encountered while processing: rkhunter Can you confirm you use prelinking? Yes, I do. If so, try prelink -a and reconfigure rkhunter. Your solution has been working. Thanks, Bartek
Bug#504428: /usr/sbin/gdmsetup: gdmsetup is not useful if /etc/gdm/gdm.conf does not exist
Same thing here, /etc/gdm.conf was present but empty. I've repaired it by copying /usr/share/gdm/defaults.conf over /etc/gdm/gdm.conf. After doing this I can change GDM settings using gdmsetup. It's probably Debian-specific. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.27.5 (SMP w/2 CPU cores; PREEMPT) Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages gdm depends on: ii adduser3.110 add and remove users and groups ii debconf [debconf-2.0] 1.5.22Debian configuration management sy ii gksu 2.0.0-5 graphical frontend to su ii gnome-session [x-sessi 2.22.3-2 The GNOME 2 Session Manager ii gnome-terminal [x-term 2.22.3-3 The GNOME 2 terminal emulator appl ii libart-2.0-2 2.3.20-2 Library of functions for 2D graphi ii libatk1.0-01.22.0-1 The ATK accessibility toolkit ii libattr1 1:2.4.43-1Extended attribute shared library ii libc6 2.7-15GNU C Library: Shared libraries ii libcairo2 1.6.4-6.1 The Cairo 2D vector graphics libra ii libdbus-1-31.2.1-4 simple interprocess messaging syst ii libdbus-glib-1-2 0.76-1simple interprocess messaging syst ii libdmx11:1.0.2-3 X11 Distributed Multihead extensio ii libfontconfig1 2.6.0-1 generic font configuration library ii libfreetype6 2.3.7-2 FreeType 2 font engine, shared lib ii libglade2-01:2.6.2-1 library to load .glade files at ru ii libglib2.0-0 2.16.6-1 The GLib library of C routines ii libgnomecanvas2-0 2.20.1.1-1A powerful object-oriented display ii libgtk2.0-02.12.11-4 The GTK+ graphical user interface ii libpam-modules 1.0.1-4 Pluggable Authentication Modules f ii libpam-runtime 1.0.1-4 Runtime support for the PAM librar ii libpam0g 1.0.1-4 Pluggable Authentication Modules l ii libpango1.0-0 1.20.5-3 Layout and rendering of internatio ii librsvg2-2 2.22.2-2 SAX-based renderer library for SVG ii librsvg2-common2.22.2-2 SAX-based renderer library for SVG ii libselinux12.0.65-5 SELinux shared libraries ii libwrap0 7.6.q-16 Wietse Venema's TCP wrappers libra ii libx11-6 2:1.1.5-2 X11 client-side library ii libxau61:1.0.3-3 X11 authorisation library ii libxdmcp6 1:1.0.2-3 X11 Display Manager Control Protoc ii libxext6 2:1.0.4-1 X11 miscellaneous extension librar ii libxi6 2:1.1.3-1 X11 Input extension library ii libxinerama1 2:1.0.3-2 X11 Xinerama extension library ii libxml22.6.32.dfsg-4 GNOME XML library ii lsb-base 3.2-20Linux Standard Base 3.2 init scrip ii metacity [x-window-man 1:2.22.0-2A lightweight GTK2 based Window Ma ii rxvt-unicode [x-termin 9.05-1+lenny1 RXVT-like terminal emulator with U ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime Versions of packages gdm recommends: ii dialog1.1-20080316-1 Displays user-friendly dialog boxe ii gdm-themes0.6.1 Themes for the GNOME Display Manag ii whiptail 0.52.2-11.3Displays user-friendly dialog boxe ii xnest 2:1.4.2-7 Nested X server ii xserver-xephyr2:1.4.2-7 nested X server ii xserver-xorg 1:7.3+18 the X.Org X server ii zenity2.22.1-2 Display graphical dialog boxes fro Versions of packages gdm suggests: ii libpam-gnome-keyring 2.22.3-2 PAM module to unlock the GNOME key ii locales 2.7-15 GNU C Library: National Language ( ii pm-utils 1.1.2.4-1 utilities and scripts for power ma -- debconf information: gdm/daemon_name: /usr/bin/gdm * shared/default-x-display-manager: gdm -- Bartek Krawczyk JID: [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500494: /usr/bin/roxterm: Backspace and cursors keys does not work when compiling linux make menuconfig
2008/9/29 Tony Houghton [EMAIL PROTECTED]: On Sun, 28 Sep 2008 22:26:41 +0100 Bartek [EMAIL PROTECTED] wrote: I did not mentioned it earlier but it did not work in previous kernel versions. I noticed that problem a few months ago, but did not reported the bug untill now. Anyway, I checked gnome-terminal and the same problem occurred. I do not use gnoem desktop, I use IceWM. Maybe that is the problem? I will report bug against libvte9. I didn't check enough keys before, I only checked backspace and up and down arrows which do work for me. Left, Right, Delete, Home and End do nothing in text input fields in make menuconfig. I checked the source code (scripts/kconfig/lxdialog/inputbox.c) and found it's programmed to ignore those keys. Yes, you right. These keys doesn't work under xterm. Do the up and down arrow keys work correctly? If so, that just leaves backspace, and you can probably get it working by changing the Keyboard-Backspace key generates option in your ROXTerm profile, but I wouldn't be able to guess which setting might be most appropriate. It might still be worth getting the vte developers (who I'm sure know far more about keyboard codes than I do) to look into it to find out why the default option doesn't work for you. I expect it's something to do with your (presumably) using a Polish keyboard. The up and down arrow work correctly. I changed the Backspace key generates option to Automatic choice. In my profile I had Control-H. Right now the text input fields in make menuconfig wokrs fine. I reminded myself that I changed that option to Control-H cause Backspace key did not work form me when I used screen. I think the bug can be closed. I will send also email to [EMAIL PROTECTED] (the bug against libvte9) to close it. Thank you, Tony, for your cooperation, Bartek -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500507: libvte9: Backspace and cursor keys dont not work when compiling linux make menuconfig
Hi, I changed the Keyboard- Backspace key generates option to Automatic choice in my profile. I had there Control-H. Right now the text input fields in make menuconfig works fine. I reminded myself that I changed this option to Control-H cause Backspace key did not work form me when I used screen. I think the bug can be closed. Sorry for bothering you. Kind Regards Bartek -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500494: /usr/bin/roxterm: Backspace and cursors keys does not work when compiling linux make menuconfig
2008/9/28 Tony Houghton [EMAIL PROTECTED]: On Sun, 28 Sep 2008 09:58:14 +0100 Bartlomiej Grodek [EMAIL PROTECTED] wrote: I have problem during compiling linux kernel using make menuconfig. A backspace, a delete, cursors, a home and an end keybord keys does not work. This situation happens when e.g. I try to choose a config file through Load an Alternate Configuration File. I cannot delete any letter nor move to the beginning of a word (default .config). I checked if this happens under xterm, but there everything is fine. It works for me, but I checked with kernel 2.6.26.5, not 2.6.27. Please could you try gnome-terminal and if it has the same bug report it against libvte9. I did not mentioned it earlier but it did not work in previous kernel versions. I noticed that problem a few months ago, but did not reported the bug untill now. Anyway, I checked gnome-terminal and the same problem occurred. I do not use gnoem desktop, I use IceWM. Maybe that is the problem? I will report bug against libvte9. Bartek -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#89359: Approved for gigantic gains
Invest in the best way to get the hottest chicks in town http://www.salnsal.com/ Orgasmic Wonderland -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#332160: Slap that cute tight ass
Amaze the girls with your humongous lovestick. http://www.eeconnisu.com/ She unwrapped herself to me -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#464122: perl-byacc: byacc incorrectly escapes '%' in printf thus creating erroneous bless line in new()
Package: perl-byacc Version: 2.0-6 Severity: important On line 87 the following line is present: fprintf(code_file, my %s $p = bless [\\%FIELDS], $_[0];\n, this does not escape the % correctly and as such fprintf() interprets it as the control sequence %F. The fix is to change % to %% resulting in the following line: fprintf(code_file, my %s $p = bless [\\%%FIELDS], $_[0];\n, -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.21.6-bk64.3 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#464122: Forgot filename
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi! Forgot to specify that the problem is in output.c /B - -- * GPG-Key: http://evil.gnarf.org/mrbk.pgp A: Because we read from top to bottom, left to right. Q: Why should i start my reply below the quoted text? - -- http://www.i-hate-computers.demon.co.uk/ -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFHqC27ckvkFeO3ANARAv6nAJ9JWmUZ+YLwcciGNQbtCq88k0iHOACeNb0Z Y1mgYMdqliVRiv3S1kF/ip0= =8uYk -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#446365: pidgin: password entering doesn't work properly. When password isn't saved, always apears error.
Package: pidgin Version: 2.2.1-1 Severity: normal -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.18-5-k7 (SMP w/1 CPU core) Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages pidgin depends on: ii gconf2 2.20.0-1 GNOME configuration database syste ii libatk1.0-0 1.20.0-1 The ATK accessibility toolkit ii libc6 2.6.1-5 GNU C Library: Shared libraries ii libcairo2 1.4.10-1 The Cairo 2D vector graphics libra ii libdbus-1-3 1.1.1-3 simple interprocess messaging syst ii libdbus-glib-1-20.74-1 simple interprocess messaging syst ii libfontconfig1 2.4.2-1.2generic font configuration library ii libglib2.0-02.14.1-4 The GLib library of C routines ii libgstreamer0.10-0 0.10.14-2Core GStreamer libraries and eleme ii libgtk2.0-0 2.12.0-2 The GTK+ graphical user interface ii libgtkspell02.0.10-3+b1 a spell-checking addon for GTK's T ii libice6 2:1.0.4-1X11 Inter-Client Exchange library ii libpango1.0-0 1.18.2-1 Layout and rendering of internatio ii libpurple0 2.2.1-1 multi-protocol instant messaging l ii libsm6 2:1.0.3-1+b1 X11 Session Management library ii libstartup-notification00.9-1library for program launch feedbac ii libx11-62:1.0.3-7X11 client-side library ii libxcomposite1 1:0.3.2-1+b1 X11 Composite extension library ii libxcursor1 1:1.1.9-1X cursor management library ii libxdamage1 1:1.1.1-3X11 damaged region extension libra ii libxext61:1.0.3-2X11 miscellaneous extension librar ii libxfixes3 1:4.0.3-2X11 miscellaneous 'fixes' extensio ii libxi6 2:1.1.3-1X11 Input extension library ii libxinerama11:1.0.2-1X11 Xinerama extension library ii libxrandr2 2:1.2.2-1X11 RandR extension library ii libxrender1 1:0.9.4-1X Rendering Extension client libra ii libxss1 1:1.1.2-1X11 Screen Saver extension library ii pidgin-data 2.2.1-1 multi-protocol instant messaging c Versions of packages pidgin recommends: ii gstreamer0.10-plugins-base0.10.14-4 GStreamer plugins from the base ii gstreamer0.10-plugins-good0.10.6-3 GStreamer plugins from the good -- no debconf information
Bug#328470: ac Links Skip
embryonic stage relations much learn explore http://img444.imageshack.us/my.php?image=xhmq6.png Smith exceeding even secrecy hydrogen bomb -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]