Package: debconf
Version: 1.5.56
Looks like updating perl broke debconf:
# aptitude purge libmpcdec6:amd64
Die folgenden Pakete werden ENTFERNT:
libmpcdec6{p}
0 Pakete aktualisiert, 0 zusätzlich installiert, 1 werden entfernt und 0
nicht aktualisiert.
0 B an Archiven müssen heruntergeladen
Package: flashplugin-nonfree
Version: 1:3.6.1
Severity: wishlist
On loading certain flash-containing pages, iceweasel complains about
missing libvdpau_radeonsi.so to the console from which iceweasel was
started. The complaint disappears after installing mesa-vdpau-drivers
10.3.2-1+deb8u1.
tags 818582 - moreinfo
stop
I provided all info I had so far. Any more info needed?
Recently, probably after switching from ftp://ftp to
http://httpredir, the bug described above occurs no more. Another
bug now seldom occurs (hash sum mismatch), which may or may not be related.
Why nobody told me that I'm measuring the IP addresses in the wrong way?
Sites like
Package: dict-de-en
Version: 1.8-4
Please update the gender of Korollar from masculine to neutral.
Thanks!
PS. As of now, I have no PC with debian sid to test, but I trust
Sebastian's test results below.
On 04/04/2016 10:53 AM, Sebastian Humenda wrote:
Hi Jaakov
I cannot confirm this bug
For an unknown reason, since switching from ftp to http, I have always
been getting the same IP address. I check the IP before/after aptitude
operations via
# ip addr show eth0 | grep "inet .* brd" ; aptitude - update ; ip
addr show eth0 | grep "inet .* brd"
Am I'm doing the IP check in
On 24.03.2016 19:50, Julian Andres Klode wrote:
On Thu, Mar 24, 2016 at 06:46:31PM +0100, Jaakov wrote:
On 23.03.2016 19:25, Jaakov wrote:
I'll check and report here. Sorry if it will take a while.
So let me first report the relevant tail of the output of
aptitude -
in the original, non
On 23.03.2016 19:25, Jaakov wrote:
I'll check and report here. Sorry if it will take a while.
So let me first report the relevant tail of the output of
aptitude -
in the original, non-anonymous form with ftp mirrors:
[
...
Holen: 1088 ftp://ftp.debian.org/debian jessie-proposed-updates
I'll check and report here. Sorry if it will take a while.
Some internet providers change the IP address of clients frequently -
approximately once a minute instead of once a day. "aptitude update"
and aptitude downloads executed by such clients cannot deal with this
fact - neither with passive nor with active sockets. They manage to
download a bit
Package: dict-freedict-deu-eng
Version: 2014.10.22-2
Please change the gender of "Korollar" from masculine to neutral:
"Korollar {m}" -> "Korollar {n}".
Reasons:
http://www.duden.de/rechtschreibung/Korollar
http://www.wissen.de/search?keyword=Korollar
The upstream maintainer is probably also
ith active sockets. They manage to download a
bit before the IP change and then say that a socket cannot be connected.
An improvement is needed. If it's already implemented, I'd like to see
the documentation of this feature.
Thanks in advance
Jaakov
Package: unattended-upgrades
Version: 0.83.3.2+deb8u1
The manpage says that logs are stored in
/var/log/unattended-upgrades.log
On my system, this file is not there. Instead, I have
/var/log/unattended-upgrades/unattended-upgrades.log
Please repair.
found 688741 gdm3/3.14.1-7
thanks
# It is there in stable...
found 613068 aptitude/0.6.11-1+b1
quit
I can reproduce it. See:
# aptitude update && aptitude
Treffer http://security.debian.org stable/updates InRelease
Holen: 1 ftp://ftp.debian.org stable InRelease
Ign ftp://ftp.debian.org stable InRelease
Treffer http://security.debian.org
found 646566 3.14.1-2
thanks
# found in current jessie...
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
/PLRM.pdf
display the file in the usual per-page mode (instead of the continuous one).
There are no user-private .xpdfrc, no aliases. The system-wide
/etc/xpdfrc has no occurrences of continuous The man page still
mentions -cont, however.
Any help?
Best,
Jaakov.
--
To UNSUBSCRIBE, email
DeaR maintainer(s),
I apologize for the previous typo.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
I do not think doing anything purposeful with the original bug report
is really possible without a PPD to work with.
Maybe jaakov has some further feedback to send in. Let's wait and see.
My original report was for a debian system and was valid at that time.
Currently, it turned out
.
Though page 2 is slightly shifted downwards with respect to page 1.
Best,
Jaakov
q2.pdf
Description: Adobe PDF document
q2_letter.pdf
Description: Adobe PDF document
As for version 3.4.1-8 of gdm3 in wheezy, the bug is not reproducible on
my machine at the moment. However, I've heard of one more report for
another version of gdm3, so let us keep this bug report open.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of
found 689420 linux-image-3.2.0-4-amd64/3.2.57-3+deb7u1
notfound 689420 linux-image-amd64/3.9+49
stop
# Booting still sometimes fails with the current 3.2.57. In the past few
months, 3.9 always succeeded.
# For security reasons, I'm starting to be worried about using an old
kernel 3.9+49 which
) is unclear.
Jaakov
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Same bug:
http://www.dickimaw-books.com/cgi-bin/bugtracker.cgi?action=viewkey=39
https://bugs.launchpad.net/ubuntu/+source/texlive-base/+bug/1223849
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
.
Thank you in advance,
Jaakov.
Am 10.09.2013 12:54, schrieb Debian Bug Tracking System:
This is an automatic notification regarding your Bug report
which was filed against the texlive-latex-extra package:
#604054: if hyperref is loaded before glossaries then text size is adapted
wrongly
It has
found 659772 2012.20120611-2
thanks
I can confirm this bug in my current wheezy installation.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
found 604054 2012.20120611-2
thanks
Tested in my current wheezy installation. Alas, the error is still there.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Dear Heiko:
It seems to me that there is some interaction problem between hyperref
and glossaries. I'm wondering whether you and Nicola Talbot could help
(I reported to her via her web interface). For the problem description,
please see
http://bugs.debian.org/604054
Thank you,
Jaakov
Dear Michael:
We have not heard some time from you. I'm wondering whether some
progress has been done on the new sciposter release that could
potentially solve the problem?
Thank you in advance,
Jaakov
On 13.07.2012 09:22, Michael H.F. Wilkinson wrote:
Could be that I should either try
Package: subversion
Version: 1.6.17dfsg-4+deb7u3
Subversion prints an error trace after commit.
The file seems to be transmitted and the e-mail seems to be sent. Due to
copyright reasons, I cannot provide any actual data, just the log after
executing the following command:
$ svn ci -m
That's the real error: the diff between the committed and the previous
version is not appended to the e-mail being sent.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
=de_DE.UTF-8
LC_TELEPHONE=de_DE.UTF-8
LC_MEASUREMENT=de_DE.UTF-8
LC_IDENTIFICATION=de_DE.UTF-8
LC_ALL=
Does this log answer your question?
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Am 16.06.2013 10:56, schrieb Sebastian Humenda:
Hello,
jaa...@ro.ru schrieb am 25.10.2011, 16:30 +0400:
During installation, the following message appears:
Setting up dict-freedict-deu-eng (1.3-4) ...
The parameter --locale=xx_YY.utf-8 was not set in your
/etc/default/dictd,
so after
/murrays/archive/2006/10/25/mathematical-rtf.aspx
(Miklós Vajna)
See http://www.libreoffice.org/download/4-0-new-features-and-fixes/
Great! As soon as it moves to testing, I'll try it out and report here.
Thanks for the fast reply
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ
Package: xserver-xorg-video-radeon
Version: 1:6.14.4-6
Severity: wishlist
Currently X boots in fail-safe mode in the following configuration
(lspci -vvv).
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI
Cape Verde [Radeon HD 7800M Series] (prog-if 00 [VGA controller])
,
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Please send your X and kernel logs.
Attached.
Cheers,
Jaakov.
dmesg.gz
Description: GNU Zip compressed data
Xorg.0.log.gz
Description: GNU Zip compressed data
any
tricks)
is booted.
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Just keeping a log of what happens while kernels get updated.
linux-image-3.2.0-4-amd64, version 3.2.35-2, sometimes succeeds booting. Dmesg
(attached) still shows some errors and gnome still starts in fail-safe mode
despite an installed firmware-linux-nonfree.
dmesg.gz
Description: GNU Zip
without such
an activity.
Jaakov.
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.6-trunk-amd64 (SMP w/8 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8
such
an activity.
Jaakov.
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.6-trunk-amd64 (SMP w/8 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8
You mean you expect that your setting is not saved?
I would expect the opposite.
You have all the time in the world to wait with saving until logout. And if
your system crashes before logout, you have much more serious problems than the
unsaved numlock state.
Jaakov.
--
To UNSUBSCRIBE
Upon inserting a delay I (unexpectedly pleasantly) got a succeeding boot. Three
log files (/var/log/boot, /var/log/dmesg, /var/log/messages) are attached;
dmesg shows diverse errors which were (luckily) not critical for this startup.
logs.tar.bz2
Description: application/bzip
Hi Ben:
I appreciate your debugging attempts a lot.
Unfortunately I have no idea about the kernel internals like
cache_alloc_refill().
I'm sending you two fotos from different boot attempts in hope that this will
give you more information.
One (BUG_acpi_off.jpg) shows the first serious error
.
Windows runs on the computer without problems and the computer is new, so a
hardware fault is unlikely. As soon as I run some testing program, I'll report
here again.
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
.
Windows runs on the computer without problems and the computer is new, so a
hardware fault is unlikely. As soon as I run some testing program, I'll report
here again.
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
.
Windows runs on the computer without problems and the computer is new, so a
hardware fault is unlikely. As soon as I run some testing program, I'll report
here again.
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
runs on the computer without problems and the computer is new, so a
hardware fault is unlikely. As soon as I run some testing program, I'll report
here again.
Jaakov.
dmesg.out.gz
Description: GNU Zip compressed data
runs on the computer without problems and the computer is new, so a
hardware fault is unlikely. As soon as I run some testing program, I'll report
here again.
Jaakov.
dmesg.out.gz
Description: GNU Zip compressed data
.
Windows runs on the computer without problems and the computer is new, so a
hardware fault is unlikely. As soon as I run some testing program, I'll report
here again.
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
.
Windows runs on the computer without problems and the computer is new, so a
hardware fault is unlikely. As soon as I run some testing program, I'll report
here again.
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
Please beg my pardon for multiple email copies: an error on my side.
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
severity 689420 grave
thanks
Now the system does not boot even when acpi=off.
It always stops booting somewhere in the middle.
To make it sometimes (!) boot, one has, in addition to acpi=off, to make grub
wait more than the obligatory 4 seconds.
And even after that, some connected hardware
this or the other solution, I'm just curious.
Best regards,
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
For whatever reason, the acpidump does not make it to the web page despite
sending it twice. Probably, it has made its way to you, Jonathan. If not,
please complain.
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
.
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
variant of) Dell Precision M6700. Link:
http://configure.euro.dell.com/dellstore/config.aspx?oc=w08m6711model_id=precision-m6700c=del=des=bsdcs=debsdt1
Please repair the kernel.
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble
.
Currently, some hardware is not used by linux, e.g., the touchpad.
Any help?
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
The files you have written have different names, namely, g2a is a part of the
file names. The installer asks for files without g2a. Are you asking me to try
the files as they are or to rename them before?
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
Package: cdrom
Version: 7.0.2
The wireless network card
Intel Centrino Ultimate-N 6300 (802.11 a/b/g/n 3X3) Half Mini Card
is detected and the following firmware files are asked for:
iwlwifi-6000-4.ucode
iwlwifi-6000-5.ucode
iwlwifi-6000-6.ucode
However, only the -4 file can be found online. I
found 638915 libreoffice-impress/1:3.5.4+dfsg-2
thanks
The overwave is still displayed as an overline.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Libreoffice-impress version 1:3.5.4+dfsg-2 does not have exactly this behavior
for whatever reason. If the maintainers are sure that the bug no more exists,
they may feel free to close this bug report.
-- Jaakov
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
When installing openclipart2 version 2.0-2 with parts -libreoffice, -png, and
-svg, the behaviour does not occur.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
While uninstalling and installing libreoffice-writer2xhtml version 1.0.2-8 on
amd64, the erroneous behaviour does not occur. However, the default-jre
(1:1.6-47) for that architecture is openjdk-6-jre (6b24-1.11.4-3). Alas, I
cannot test other JREs now.
--
To UNSUBSCRIBE, email to
On libreoffice-impress 1:3.5.4+dfsg-2 the hatch is displayed, but the border of
the hatched area is not a circle, but an octagon that contains the circle.
Thus, the bug continues to exist in a different form.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject
Not found in libreoffice-impress 1:3.5.4+dfsg-2
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
The web page redirects to another web page, which does not close unexpectedly.
Thus, the bug is, strictly speaking, not reproducible at the moment. However,
the following messages are printed to console from which epiphany-browser was
started:
(epiphany-browser:6650): Gtk-CRITICAL **:
found 638915 libreoffice-impress/1:3.5.4+dfsg-2
thanks
The overwave is still displayed as an overline.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: texlive-pstricks
Version: 2012.20120611-2
Severity: wishlist
The older versions lack \psparallelogrambox, the never one has it! We need it
to draw flowcharts, etc.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
Dear maintainers of hyperref and sciposter!
We have found an incompatibility problem between both packages and are not able
to address it ourselves. We wonder whether you could do that? Please see the
debian bug report http://bugs.debian.org/659772
Regards
Jaakov.
--
To UNSUBSCRIBE, email
Thanks, great! Let me notice that if you add setpagesize=false, the output is
ok, but additionally providing -t landscape to dvips makes the output wrong
again. Probably, plain users should not care of such details or be guessing. By
the way, why does hyperref have to set the page size by
root root 9 Jun 25 20:29 /usr/share/gdm/dconf-profile
Best regards
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: gnome
Version: 1:3.0+9
Severity: wishlist
Currently, gnome depends on gnome-games. I, probably as well as other users in
the office environments, would like to be able to remove games completely and
retain the standard functionality. I suggest putting
Can't reproduce on gv 1:3.7.3-1 included into the current debian testing.
Jaakov
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Neither can I reproduce it on a new machine now. Thanks, good job!
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
twice or even more often),
- upgrades of other packages.
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
After doing an installation of gdm3 version 3.0.4-4, the background cannot be
removed by the method in the bug report. I'm searching for a solution...
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
'
gconftool-2 --direct --config-source xml:readwrite:/etc/gconf/gconf.xml.defaults --type
string --set /desktop/gnome/background/primary_color #00
Jaakov.
-- System Information:
Debian Release: wheezy/sid
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'testing'), (500
Package: epiphany-browser
Version: 3.2.1-2
Reproduce:
1. Start the browser.
2. Type ftp://ftp.cs.rochester.edu/; in the the address line and
press Enter.
3. Read the followign message:
[
Oops! It was not possible to show this website
The website at
Sorry, I have made a wrong copy-and-paste. The appeared error message
is, of course, the following one:
[
Oops! It was not possible to show this website
The website at ftp://ftp.cs.rochester.edu/ seems to be unavailable. The
precise error was:
URL cannot be shown
It could be
).
Best regards,
Jaakov
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Which is unsupported. And can't (at least not without a hughe
overhead)
fixed anymore given unstable is already as the (suppported) 3.5.x-
In this case, will my data on the previous version still be useful for
you or would you like to wait a bit more until I try out 3.5.x?
--
To
Package: libreoffice-writer2xhtml
Version: 1.0.2-7
Severity: serious
Dear Maintainer(s), dear Rene:
I've got access to the relevant system earlier than expected. Here is
the reportbug report. As soon as libreoffice 3.5.x enters testing, I'll
try it out and report here.
Thank you,
Jaakov
Package: openclipart-svg
Version: 2.0-2
Severity: critical
While installing the package in aptitude, I get the following message:
Setting up openclipart-svg (2.0-2) ...
Processing triggers for menu ...
Processing triggers for libreoffice-common ...
Synchronizing repository for bundled
Thank you!
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
How much?
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
I see. I'm neither a registered debian developer nor knowing enough
about to be one.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: cvc3
Version: 2.2-13.1
Severity: wishlist
It would be nice if you could update to the latest upstream version (27
January 2012 or later). The current one does not understand SMTLIB 2.0.
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject
or not including the
hyperref package results in a normal image as expected.
I would be grateful if anyone with more insight into the interplay
between sciposter, hyperref, latex, and dvips could repair this issue.
Best regards
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ
Package: apsfilter
Version: 7.2.6-1.3
apsfilter suggests the transitional pnm2ppa, which has been superseeded
by printer-driver-pnm2ppa. It is strange, perhaps even useless, to
suggest a transitional package.
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
Since 3.2.4-1 is in testing, I'm running the new kernel earlier than I
thought. The bug report is closed, so I guess I should reopen the bug if
the behavior continues. If I don't report on this issue within, say, 1
month, feel free to forget it.
--
To UNSUBSCRIBE, email to
Ok.
Thank you. Due to the production system, I'm reluctant to install a
kernel from unstable. As soon as the critical tasks are over, which will
take me one or two weeks, I'll get the chance and report here once
again.
Greetings,
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ
* Rene Engelhard r...@debian.org [Fri, 27 Jan 2012 13:42:41 +0100]:
tag 657515 + moreinfo
thanks
[ maybe you actually should have sent to this to Jaakov,
n...@bugs.debian.org DOES NOT go to t he submitter. CC'ing ]
Hi,
On Thu, Jan 26, 2012 at 09:58:11PM +0100, Jack.R wrote:
Hello Jaakov,
I
.
5. Observe that the space between a and b is not displayed as a dot.
Actually, the view does not change.
The same happens if we had inserted Tab, Enter, nonbreakable space, etc.
instead of the usual space.
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
Package: cdrdao
Version: 1:1.2.3-0.2
I have tested the following drive, and it supports CD-TEXT with
generic-mmc. But it is not present in the cdrdao database currently.
Please feel free to update.
$ wodim -atip
...
Device type: Removable CD-ROM
Version: 5
Response Format: 2
?
Jaakov.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: lame
Version: 3.99.3+repack1-1
When trying to make tags having names like José (resp. François), the
input is truncated at é (resp. transformed to Francois). For
example, after
lame --id3v2-utf16 --tt José input.wav output.mp3
just Jos is stored in output.mp3.
--
To UNSUBSCRIBE,
Package: cdrdao
Version: 1:1.2.3-0.2
The only information we get from the manpages is that for the tocfile,
the language code of English is 9. The numbers of other languages are
not available, making the feature useless.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
This time it's your mistake, my friend.
The file /etc/gdm3/greeter.gconf.defaults is not present on my system.
However, /etc/gdm3/greeter.gconf-defaults is present.
The corrected suggestion of Josselin for completely removing the
background worked on at least one computer.
Changing /etc/gdm3/greeter.gsettings also works on another computer.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
1 - 100 of 139 matches
Mail list logo
