Package: bluez
Version: 5.73-1
Severity: important
X-Debbugs-Cc: kjo...@poczta.onet.pl
I have usb bluetooth adapter:
Bus 005 Device 115: ID 0b05:17cb ASUSTek Computer, Inc. Broadcom BCM20702A0
Bluetooth
When I plug out and then plug in this adapter - bluetooth daemon started
to get "running"
Package: lists.debian.org
Severity: normal
X-Debbugs-Cc: kjo...@poczta.onet.pl
I read debian mailing lists as usenet newsgroup linux.debian.* but it seems
that
messages stopped forwarding since (about) Apr 1st.
KJ
With
ii emacs-lucid 1:29.2+1-2+b1 amd64GNU Emacs editor
(with Lucid GUI support)
it seems to work correctly again, so I think we can close this.
KJ
--
http://wolnelektury.pl/wesprzyj/teraz/
Premature optimization is the root of all evil.
-- D. E. Knuth
Salvatore Bonaccorso writes:
[..]
>> please reopen the bug, see https://www.debian.org/Bugs/server-control
>> for details.
>
> Oh it seems I miss-closed while doing housekeeping of linux bugs, as
> this was re-eassociated with firmware-nonfree. but I won't open it now
> again. In case the issue
the affected KVM guests are on the only hypervisor in
our server room that has an AMD CPU. Before them I upgraded several
other systems -- hosted on servers with Intel CPUs -- and I encountered
no problems at all.
Kind regards
--
Kamil Wilczek [https://keys.openpgp.org
Installing the 6.1.X kernel from the bullseye-backports
apparently solves the problem, so this might be a temporary
solution to affected systems (if applicable).
Kind regards,
--
Kamil Wilczek [https://keys.openpgp.org/]
[6C4BE20A90A1DBFB3CBE2947A832BF5A491F9F2A]
OpenPGP_signature
Description
temd[1]: systemd-journal-flush.service: Main process
exited, code=exited, status=1/FAILURE
[2.308002] systemd[1]: systemd-journal-flush.service: Failed with
result 'exit-code'.
Kind regards,
--
Kamil Wilczek [https://keys.openpgp.org/]
[6C4BE20A90A1DBFB3CBE2947A832BF5A491F9F2A]
Package: aide-common
Version: 0.18.1-2
Severity: wishlist
X-Debbugs-Cc: kjo...@poczta.onet.pl
Recently aide started to send mails not by sendmail command but by connecting
to port 25 on localhost, using s-nail.
As I can see user (root) sending mail is hardcoded in
version 1:102.9.0-1+b1 seems to works correctly.
Thank you.
Carsten Schoenert writes:
[...]
>
> it seems that the depending library libnss3-dev, that got an update
> right after the update of the Thunderbird package, had introduced some
> regressions that could result in the problems you
Package: thunderbird
Version: 1:102.9.0-1
Severity: normal
X-Debbugs-Cc: kjo...@poczta.onet.pl
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
Trying to fetch mail from microsoft365 account, where oauth2 is
Jose M Calhariz writes:
> On 3/13/23 13:16, Kamil Jońca wrote:
>> "Debian Bug Tracking System" writes:
>>
>>> Thank you for filing a new Bug report with Debian.
>>>
>>> You can follow progress on this Bug here: 1032884:
>>> https://b
"Debian Bug Tracking System" writes:
> Thank you for filing a new Bug report with Debian.
>
> You can follow progress on this Bug here: 1032884:
> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1032884.
>
dpkg -l "amanda*"
Desired=Unknown/Install/Remove/Purge/Hold
|
Package: amanda-client
Version: 1:3.5.1-10
Severity: grave
Justification: renders package unusable
X-Debbugs-Cc: kjo...@poczta.onet.pl
After recent update all my bacukups are unsuccessfull.
Below log:
sudo -u backup amstatus alfa
Using: /var/lib/amanda/alfa/state/log/amdump.1
>From Mon Mar
that I won't be designating, recommending or approving any
new developer of new upstream cdw project.
*) current developer, until today.
Best regards,
Kamil Ignacak
This also affects mpd. Please see bug #1023872 for the details , but
the gist is the same as the samba situation described here.
Thanks for the quick reply, Max.
I can confirm that installing liburing2=2.3-1 causes mpd=0.23.9-1+b3
to run flawlessly.
Will file a new bug against liburing.
On Fri, 11 Nov 2022 at 20:55, Max Kellermann wrote:
>
> On 2022/11/11 20:52, Max Kellermann wrote:
> > This could be a liburing ABI
Package: aide-common
Version: 0.17.4-2
Followup-For: Bug #1010717
X-Debbugs-Cc: kjo...@poczta.onet.pl
I am not sure if this bug should be against aide-common and not against
spamassasin package, but it seems
that expressions in "21_aide_spamassassin" file cannot deal with non - numbers
version
Package: gimp
Version: 2.10.32-1+b1
Followup-For: Bug #1018105
X-Debbugs-Cc: kjo...@poczta.onet.pl
My gimp crashes when i try:
add text to image and then try convert RGB->Indexed colors
so I guess it is the same/similar cause
crash report below:
```
GNU Image Manipulation Program version
I just installed thunderbird 102.1 - bug still exists. It should be reopen.
KJ
--
http://wolnelektury.pl/wesprzyj/teraz/
It seems to be https://bugzilla.mozilla.org/show_bug.cgi?id=1745033
--
http://wolnelektury.pl/wesprzyj/teraz/
Carsten Schoenert writes:
> Hello kjonca,
>
> Am 10.07.22 um 10:01 schrieb kjonca:
>
>> I have noticed that I cannot access my local nntp server.(Waiting sign was
>> for a long time, and I decided to break)
>> no nntp messages were displayed.
>> I have no additions.
>> I have decided to create
It seems that there is some relation about process limits
When I changed in limits.conf
--8<---cut here---start->8---
grep logcheck /etc/security/limits.conf
logcheck- nproc 5000
--8<---cut
Package: exim4
Version: exim4-daemon-light
Severity: normal
X-Debbugs-Cc: kjo...@poczta.onet.pl
I have configured exim to deliver mail via dovecot-lda with pipe transport.
Recently I found that mails between two different local user are not delivered
immediately but, during first deliver exim
previously I paste wrong cipher_list, should be:
cipher_list =
"AECDH-AES256-SHA@SECLEVEL=0:AECDH-AES128-SHA@SECLEVEL=0:TLSv1.0:DEFAULT"
--
http://stopstopnop.pl/stop_stopnop.pl_o_nas.html
based on
%diff <(openssl ciphers -s -v 'TLSv1@SECLEVEL=1') <(openssl ciphers -s -v
'TLSv1@SECLEVEL=0')
5a6
> AECDH-AES256-SHA TLSv1 Kx=ECDH Au=None Enc=AES(256)
> Mac=SHA1
7a9,12
> AECDH-AES128-SHA TLSv1 Kx=ECDH Au=None Enc=AES(128)
After taking look into sources I set:
and this seems to work
cipher_list = "DEFAULT@SECLEVEL=1:TLSv1@SECLEVEL=0"
tls_min_version= 1.0
tls_max_version = 1.2
but, to be honest, I do not know how secure is such configuration.
KJ
--
http://stopstopnop.pl/stop_stopnop.pl_o_nas.html
Package: freeradius
Version: 3.2.0+dfsg-1
Severity: important
X-Debbugs-Cc: kjo...@poczta.onet.pl
When upgraded to new version I found that some clients cannot connect.
In logs I have:
Sat Jun 4 12:44:50 2022 : Debug: (2) eap1: Expiring EAP session with state
0xab52c2e6aa35db5e
Sat Jun 4
Recently I use
$dpkg -l linux-image-5.17.0-2-amd64
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version Architecture
I somehow overlooked, that my bug sems to be duplicate of
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1010240
Sorry for that.
KJ
--
http://wolnelektury.pl/wesprzyj/teraz/
in bullsyeye?
Thanks a lot.
Greetings,
Kamil
-- System Information:
Debian Release: 11.3
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 5.10.0-13-amd64 (SMP w/16 CPU threads)
Locale: LANG
Also checked:
rsync -az --progress keyring.debian.org::keyrings/keyrings/ .
for q in *; do gpg --list-packets <$q ; done |grep 648ACFD622F3D138
[...empty...]
--
http://wolnelektury.pl/wesprzyj/teraz/
Today I also faced this issue.
I tried with and without apt-cacher-ng.
moreover (I do not know if I check properly)
%gpg --keyserver keyring.debian.org --recv-key 0x648ACFD622F3D138
gpg: no valid OpenPGP data found.
gpg: Total number processed: 0
--
David Bauer writes:
> Hi Andrej
>
> On 1/31/22 18:49, Andrej Shadura wrote:
>> Hi,
>> I have received this bug report for wpa-supplicant 2.10.
>
> Please see this thread [0] and this patch. [1]
>
> [0] http://lists.infradead.org/pipermail/hostap/2022-January/040178.html
> [1]
Package: wpasupplicant
Version: 2:2.10-1
Severity: important
X-Debbugs-Cc: kjo...@poczta.onet.pl
I have upgraded some packages on my laptop with
24:00.0 Network controller: Broadcom Inc. and subsidiaries BCM43228
802.11a/b/g/n
controller. After I was not able to up wlan interface and in logs
Package: calamaris
Version: 2.99.4.5-3
Severity: normal
Tags: upstream
X-Debbugs-Cc: kjo...@poczta.onet.pl
Recently I started to get strange messages from calamaris:
/usr/bin/calamaris: I don't know this input format. Please check the
input. If you're sure that the
I was able to start X by adding the following configuration file to
xorg.conf.d :
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "Accel" "false"
Option "DRI" "false"
EndSection
Package: xserver-xorg-core
Version: 2:1.20.11-1
Xorg fails to start on my laptop after a recent update. When lightdm
(my default display manager) tries to start it, it just goes into an
infinite loop where it looks like X might be running okay (the mouse
cursor appears for a split seconds), but
I do not know how to classify it.
It seems that calibredb timeout is determined by timeout setting at
calibre server side.
I.e if I set at server side I set timeout to 600 seconds calibredb
started to behave as expected.
So maybe calibredb behaviour is correct, but information about server
After some digging it seems that, calibre in
--8<---cut here---start->8---
File "/usr/lib/calibre/calibre/db/cli/main.py", line 205, in remote_run
--8<---cut here---end--->8---
pass proper timeout (600) to "mechanize
Package: calibre
Version: 5.26.0+dfsg-2
Severity: normal
X-Debbugs-Cc: kjo...@poczta.onet.pl
I quite frequently try to add ebooks wiht
calibredb --timeout=600 add
--with-library='http://localhost:8080/#CalibreLibrary'
but regardless of "timeout" parameter, after about two minutes I got:
Package: amanda-client
Version: 1:3.5.1-7
Severity: important
Tags: patch upstream
X-Debbugs-Cc: kjo...@poczta.onet.pl
In newer (>=10) postgres version
(https://www.postgresql.org/docs/10/release-10.html)
"xlog" function renames to "wal" functions.
This makes ampgsql script pretty unusable.
Mike Hommey writes:
> On Mon, May 24, 2021 at 08:51:43AM +0200, Kamil Jońca wrote:
>>
>>
>> Mike Hommey writes:
>> >
>> > Can you also provide about:support content for that working firefox 88?
>
> Can you go to about:config, set gfx.webrend
Mike Hommey writes:
>
> Can you also provide about:support content for that working firefox 88?
Application Basics
--
Name: Firefox
Version: 88.0.1
Build ID: 20210504152106
Distribution ID:
User Agent: Mozilla/5.0 (X11; Linux x86_64; rv:88.0) Gecko/20100101 Firefox/88.0
OS:
Mike Hommey writes:
> On Tue, May 18, 2021 at 07:39:27PM +0200, Kamil Jońca wrote:
>> Package: firefox
>> Version: 87.0-2
>> Severity: important
>> X-Debbugs-Cc: kjo...@poczta.onet.pl
>>
>> Dear Maintainer,
>>
>> *** Reporter, please co
Package: firefox
Version: 87.0-2
Severity: important
X-Debbugs-Cc: kjo...@poczta.onet.pl
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
Upgrade to 88.0.1 version
* What exactly did you do (or not do) that was
Now I can connect to calibre server without problems
--8<---cut here---start->8---
%aptitude show calibre
Package: calibre
Version: 5.16.1+dfsg-1
New: yes
State: installed
Automatically installed: no
Priority: optional
Section: text
Maildir flags were fixed in Version 3.11, 2020-12-23 of upstream
http://git.savannah.gnu.org/cgit/mailutils.git/plain/NEWS?id=c8f80734251804f25247fc3b3a234e990a217b57
(And I can confirm this works)
KJ
--
http://stopstopnop.pl/stop_stopnop.pl_o_nas.html
Slightly better patch, can handle 0-length PIN (i.e. when we simply push Enter
for PIN)
KJ
--- ../pam-u2f-1.1.0/util.c 2020-08-10 09:19:44.0 +0200
+++ util.c 2021-04-25 15:45:41.780841355 +0200
@@ -1370,8 +1370,21 @@
goto out;
}
-if (pin_verification ==
Package: libpam-u2f
Version: 1.1.0-1
Severity: normal
Tags: patch upstream
X-Debbugs-Cc: kjo...@poczta.onet.pl
I issued directly against pam-u2f module, at
https://github.com/Yubico/pam-u2f/issues/175
but I am not sure if they want to do anything about it.
I did some digging and found that pin
Package: vlc
Version: 3.0.12-1
Severity: normal
X-Debbugs-Cc: kjo...@poczta.onet.pl
To be honest I am not sure if it bug in vlc, and not elsewhere.
I have:
08:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cedar
[Radeon HD 5000/6000/7350/8350 Series]
this card has three
"Debian Bug Tracking System" writes:
Attached full compilation message :
compilation.txt.gz
Description: application/gzip
--
http://stopstopnop.pl/stop_stopnop.pl_o_nas.html
Package: mutter-common
Version: 3.38.2-1
Severity: important
Tags: upstream
X-Debbugs-Cc: kamil.wilc...@protonmail.com
I have an nVidia GTX 1650 GPU and installed weekly
testing system with GNOME desktop.
* nouveau is basically unusable, it displays the desktop,
but lags heavily and simple
Seems that it is related to debug-on-error variable.
When it is set to non-nil - emacs exists with error.
When it is set to nil - emacs survives lost connection.
KJ
--
http://stopstopnop.pl/stop_stopnop.pl_o_nas.html
I tried to install emacs-lucid:amd64=1:26.1+1-3.2+deb10u1 and effect was the
same, so this behaviour does not depen on emacs version. Maybe some additional
files were changed?
KJ
--
http://wolnelektury.pl/wesprzyj/teraz/
Package: emacs
Version: 1:27.1+1-3
Severity: normal
I quite often use emacs as server on my desktop computer and connect to it via
ssh forwarding from my laptop.
So far it works very good.
But after last update (emacs27) every time when server lost connection to
client emacs exits (and is
Package: libreoffice-sdbc-postgresql
Version: 1:6.3.3~rc1-1
Severity: important
Tags: upstream
I am not sure if it is really upstream things but I filled bug https:
//bugs.documentfoundation.org/show_bug.cgi?id=128488
libreoffice-sdbc-postgresql is unusable with postgresql 12 databases
In logs
Package: linux-image-5.2.0-3-amd64
Severity: important
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
Trying to use wifi under new kernel
* What exactly did you do (or not do) that was effective (or
Package: src:linux
Version: 5.2.9-2
Severity: important
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
Trying to use ethernet controler - but it was very slow (single kilobytes/sec)
* What exactly did you
Package: tmux
Version: 2.9a-3
Severity: important
At random moments tmux segfaults, destroying all sessions.
in dmesg we have:
[173131.642689] tmux: server[3258]: segfault at e1 ip 56262a6221a4 sp
7ffccc134c30 error 6 in tmux[56262a5eb000+6]
[173131.642703] Code: 48 c7 85 30 01 00
Recetly I connect Samsung GT-5330 ("ch@t") and I can observe the same
behavior.
KJ
--
http://stopstopnop.pl/stop_stopnop.pl_o_nas.html
"I may be synthetic, but I'm not stupid"
-- the artificial person, from _Aliens_
Package: go-mtpfs
Version: 0.0~git20180209.d6f8f3c-1
Severity: important
I have lenovo K5 Android phone.
when I mount it with:
go-mtpfs -dev 'b41adca4' /media/skowronek/
files are visible for a while, but then disappeared - cannot see them (although
they remain on phone)
Honestly - i do not
Hi there.
The issue has been resolved upstream and a fix has been merged into
the mainline development tree :
https://gitlab.com/sane-project/backends/merge_requests/34
Seeing how regular releases of sane-backends are rather rare, is there
any chance of incorporating this patch into the Debian
Package: freeradius
Version: 3.0.16+dfsg-4.1+b1
Severity: grave
Justification: renders package unusable
After upgrade, freeradius refuses to start.
In its log we can see:
Tue Oct 16 21:59:52 2018 : Error: /etc/freeradius/3.0/mods-enabled/dhcp[18]:
Failed to link to module 'rlm_dhcp':
Vincas Dargis writes:
> On Sun, 26 Aug 2018 10:58:50 +0200 Kamil Jonca wrote:
>> After last upgrade of apparmor, soffice command end with error, and in log
>> we can see:
>>
>>
>> audit: type=1400 audit(1535272402.067:422): appa
Package: apparmor
Version: 2.13-8
Severity: normal
After last upgrade of apparmor, soffice command end with error, and in log we
can see:
audit: type=1400 audit(1535272402.067:422): apparmor="ALLOWED"
operation="exec" info="profile transition not found" error=-13
If I correctly understand man page, bug filled by me has nothing with
mailfirst/maillast.
Assume we have files
log
log-
log-.xz
...
log-.xz
So far, when oldest (log-.xz in my example) file was about to be
deleted, it was DECOMPRESSED,
and mailed.
My bug is about fact, that this file contents
Source: libreoffice
Version: 3a6.1.0~rc2-3
Severity: grave
Justification: renders package unusable
I found that in my database forms, at version 6.1 libreoffice, all checkboxes
and radiobuttons are missing.
Only their labels exist, but no field to enter/check value.
Simplest way to observe it
I also had this problem. (Moreover mnemosyne ends with segmentation
fault)
But after installing python3-opengl mnemosyne start to work. So it would
be worth to check dependencies.
KJ
--
http://wolnelektury.pl/wesprzyj/teraz/
Jesus is my POSTMASTER GENERAL ...
Package: freeradius-config
Version: 3.0.16+dfsg-1+b1
Severity: normal
With default configuration there is two directories:
sites-available - with modules/config files available to use
and
sites-enabled - with config files actually used by freeradius daemon
with default configuration all
I can confirm, that upgrade wpasupplicant:amd64 (2:2.4-1, 2:2.6-13)
breaks wireless networking.
I have NO network manager.
there were no other changes (broadcom drivers or firmware)
downgraded wpasupplicant works like a charm.
KJ
--
http://wolnelektury.pl/wesprzyj/teraz/
The only difference
Package: amanda-server
Version: 1:3.5-2
Severity: grave
Tags: upstream
Justification: causes non-serious data loss
(I am not sure if it is upstream)
I used to make backup two phases.
1. amdump to holding space, and then
2. amflush to target disk (vtapes)
I noticed that I can make amflush
--- mailutils-3.1.1/libproto/maildir/mbox.c 2016-12-03 21:19:08.0 +0100
+++ mailutils-3.1.1-kj/libproto/maildir/mbox.c 2017-09-10 11:48:20.147952071 +0200
@@ -95,10 +95,10 @@
{ 'F', MU_ATTRIBUTE_FLAGGED },
{ 'P', 0 }, /* (passed): the user has resent/forwarded/bounced this
Package: mailutils
Version: 1:3.1.1-1
Severity: normal
Tags: upstream
According to http://cr.yp.to/proto/maildir.html
letter R and S in message file name means that user has Replied and See(n)
message.
Unfortunately mailutils author does not follow this convention;
R treates as Read , and
I can say, that this version break my freeradius. No windows client (Win8.1 and
Win7) can connect to my wifi.
The same with 3-yrs old android tablets.
KJ
--
http://stopstopnop.pl/stop_stopnop.pl_o_nas.html
Machines that have broken down will work perfectly when the repairman arrives.
Rene Engelhard <r...@debian.org> writes:
> Hi,
> On Wed, Aug 09, 2017 at 06:19:42PM +0200, Kamil Jonca wrote:
>> 1. Open Writer or Calc window
>
> So if this affected also Writer, why is this assigned against
> libreoffice-calc?
Because I am not sure against which p
Package: libreoffice-calc
Version: 1:5.4.0-1
Severity: normal
1. Open Writer or Calc window
2. Open emacs or xterm window, write some random text.
3.Select this text (but DON'T use Ctrl-Insert or sth)
4. change focus to Calc or Writer window
5. push middle mouse button
I expect, that in
Package: calibre
Version: 3.1.1+dfsg-1
Severity: normal
When I try use calibredb with remote server I got utf-encoding errors i.e.
%calibredb --with-library='http://localhost:8080/#CalibreLibrary' list
DeDRM v6.1.0: In
I did some tests, and it looks like, after disabling "Look Out (fix
version)" it works ok.
So my bug is rather invalid.
KJ
--
http://stopstopnop.pl/stop_stopnop.pl_o_nas.html
An algorithm must be seen to be believed.
-- D. E. Knuth
Package: logrotate
Version: 3.11.0-0.1
Severity: normal
After upgrade logrotate sends me compressed logs after rotation instead of
plain uncompressed ones.
I can't find any documentation about this change (ie. new option or sth) so I
do not know if it is
intentional or not.
With 3.8.7-2 I
Jose M Calhariz writes:
> I investigated this defect and I do not understand what went wrong
> because a recompile make it work again.
> This package have a pending upload to fix the build with openssl 1.1.0.
>
Interesting. Package made by apt-get source et al. works.
KJ
--
Hm. It looks like, that it is rather with ssl or perl libraries.
because installing
amanda-server_1%3a3.3.9-1_amd64.deb amanda-common_1%3a3.3.9-1_amd64.deb
amanda-client_1%3a3.3.9-1_amd64.deb
did not resolve problem - message about undefined symbol is the same.
(And this version previously
Package: amanda-common
Version: 1:3.3.9-2
Severity: grave
Justification: renders package unusable
amdump ends prematurely with report:
an't load '/usr/lib/x86_64-linux-gnu/amanda/perl/auto/Amanda/Debug/libDebug.so'
for module Amanda::Debug: /usr/lib/x86_64-linux-gnu/amanda/libamanda-3.3.9.so:
Package: ussp-push
Version: 0.11-4
Severity: important
I cannot send any file to my phone.
Example calling with debug options
---
ussp-push --debug 90:09:17:B1:68:73@ IMG_5358.JPG IMG_5358.JPG
Package: installation-reports
Boot method: netboot PXE
Image version:
https://d-i.debian.org/daily-images/i386/daily/netboot/netboot.tar.gz
[time stamp: 2016-08-19 00:39]
Date: 2016.08.19 08:30 am CEST
Machine: Windows7 + VirtualBox
Processor: generic VirtualBox 1 CPU
Memory: Generic
Package: rss2email
Version: 1:3.9-2
Severity: important
Cannot get feeds from (for example) http://www.dns.pl/dns.xml
I got:
Traceback (most recent call last):
File "/usr/bin/r2e", line 5, in
rss2email.main.run()
File "/usr/lib/python3/dist-packages/rss2email/main.py", line 175, in run
Package: w3m
Version: 0.5.3-28
Severity: normal
Tags: upstream
When try to render any table it is rendered incorrectly.
border are shortert than cell contents.
MOreover it looks like is something wrong with redrawing when scroll page,
and after somoe scrolls up/down screen is pretty unusable.
It is fixed in RouterOS version 6.36rc28 (Release candidate)
*) ovpn - fixed compatibility with OpenVPN 2.3.11;
smime.p7s
Description: Elektronicky podpis S/MIME
Package: bugs.debian.org
Severity: important
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
I think some update I made. I use latest debian testing amd64 + xfce +
lightdm
* What exactly did you do (or
kamil@icerock:~$ LC_ALL=C id debian-tor
uid=118(debian-tor) gid=123(debian-tor) groups=123(debian-tor)
kamil@icerock:~$
Původní zpráva Od: Peter Palfrader
<wea...@debian.org> Datum:20. 10. 2015 22:30 (GMT+01:00)
Komu: Kamil Navrátil <lecbane...@gmail.com&
Package: tor
Version: 0.2.7.3-rc-1
Severity: important
Dear Maintainer,
Tor service won't start at all. Jessie version reported "Something or somebody
made /var/log/tor disappear." and did not start. So I've upgraded for
experimental / does not start as well.
-- Logs begin at Út 2015-10-20
HI Peter,
Thank you very much...
here we are:
root@icerock:/home/kamil# systemctl status tor
tor.service - Anonymizing overlay network for TCP
Loaded: loaded (/lib/systemd/system/tor.service; enabled)
Active: failed (Result: start-limit) since Út 2015-10-20 20:48:43 CEST;
1h 23min ago
Package: stunnel4
Version: 3:5.18-1
Severity: important
When run, stunnel complaints about:
=
2015.08.24 14:08:23 LOG5[ui]: Compiled with OpenSSL 1.0.2c 12 Jun 2015
2015.08.24 14:08:23 LOG5[ui]: Running with OpenSSL 1.0.2d 9 Jul 2015
=
moreover it
Package: libqt5webkit5
Version: 5.3.2+dfsg-3
Severity: important
Tags: upstream
It looks like, it replaces soft hyphens into spaces.
I think that it is related to
https://bugreports.qt-project.org/browse/QTBUG-40912 which is marked as done in
upstream.
-- System Information:
Debian Release:
I can confirm this bug.
My *suspection* is that crash after resolvin my own zone.
IE if bind is authoritative for zone 'kjonca' then
$dig alfa.kjonca
causes crash.
When bind is only forwarding queries it can work pretty long.
KJ
--
http://wolnelektury.pl/wesprzyj/teraz/
--
To
Package: amanda-server
Version: 1:3.3.6-1+b1
Severity: normal
When I try to run as user kjonca in my home directory command:
$sudo -u backup amstatus alfa
I got:
Can't locate Tie/StdHash.pm: Permission denied at
/usr/share/perl/5.20/base.pm line 97.
...propagated at
Package: libcw6
Version: 3.3.1-1
Severity: minor
Tags: upstream
Dear Maintainer,
* What led up to the situation?
Testing unixcw application with OSS audio output on FreeBSD 10.
* What exactly did you do (or not do) that was effective (or
ineffective)?
I started cwcp
On 24.08.2014 18:15, Kamil Ignacak wrote:
Since libcw6 was built with OSS support, and OSS was configured
correctly on the build machine, unixcw should be able to use OSS
audio sink without problems.
Hi!
The attached patch fixes the problem on FreeBSD, and does not negatively
On 22.08.2014 23:01, Kamil Ignacak wrote:
* What was the outcome of this action?
* What outcome did you expect instead?
-t option should set tone (frequency) of sound in cwcp to 200 Hz,
but cwcp was using its default 800 Hz. cwcp does not read the value
Package: cwcp
Version: 3.3.1-1
Severity: normal
Tags: upstream
Dear Maintainer,
* What led up to the situation?
I was trying to affect operation of cwcp by setting CWCP_OPTIONS
environment variable, as described in cwcp man page.
* What exactly did you do (or not do) that was
==
If you want only *tcp* listening sockets, you need to specify
the -t option in addition to -l.
==
Sorry, my fault in description of expected results.
Should be:
no unix sockets visible
In my output I have for example (I recall: there was -4 option):
1 - 100 of 146 matches
Mail list logo