Package: python-json-schema-validator
Version: 2.3.1-3
Greetings!
The package description is "JSON schema validation utility", which is a bit
misleading. The problem is that it doesn't provide a utility with which you
can validate JSON agains a schema. Instead, it provides a "Python module"
or a
Package: cyrus-nntpd-2.4
Version: 2.4.17+nocaldav-0~deb8u1
Severity: grave
Justification: renders package unusable
Dear Maintainer,
I have upgraded my server to from Debian 7 to Debian 8.
After this upgrade it is not possible anymore to feed news into
my imap spool. In the logs I get the
Per Olofsson wrote:
> xdg-utils does not depend on KDE, actually. It is supposed to work
> with any desktop environment.
>
> Which desktop environment (if any) are you using?
Hmmm, question is rather which DE I was using (on my old computer
at that time ...), but I think I used
Package: i3lock
Version: 2.6-1
Severity: important
Dear Maintainer,
I just tried to try out i3lock. When I run it, I expect it to lock my
X11 session until I unlock it with a password.
Instead, it just dies with a segfault.
I'm not using i3 (which seems to be the primary target) but fluxbox.
I
Michael Stapelberg stapelb...@debian.org wrote:
Ulrich Eckhardt ulrich.eckha...@base-42.de writes:
ii libxkbcommon-x11-0 0.4.1-1
ii libxkbcommon0 0.4.0-1
Note that you have version 0.4.1-1 of libxkbcommon-x11-0 but 0.4.0-1
of libxkbcommon0. That _should_ not be a problem, but you
Package: arandr
Version: 0.1.7.1-1
Severity: wishlist
Hi!
I have a setup with a laptop, a docking station and two external monitors
connected to the docking station. Since the laptop can only drive two
displays at a time (it only has two CRTCs), I use xrandr to turn off the
internal LVDS display
Package: lxrandr
Version: 0.1.2-3
Severity: wishlist
Hi!
I have a setup with a laptop, a docking station and two external monitors
connected to the docking station. Since the laptop can only drive two
displays at a time (it only has two CRTCs), I use xrandr to turn off the
internal LVDS display
package: keepass2
version: 2.25+dfsg-1
The keyboard shortcut to auto-type a password (control+V) is causing me
problems, sometimes it works, sometimes not. I have the feeling that
keepass starts typing the password while I still have the control key held,
which changes the meaning of the
Package: cyrus-nntpd-2.4
Version: 2.4.16-4+deb7u1
Severity: grave
Tags: upstream
Justification: renders package unusable
Dear Maintainer,
I have upgraded my server to from Debian 6 (with cyrus 2.2) to Debian 7 (with
cyrus 2.4.16). After this upgrade it is not possible anymore to feed news into
Hi!
I'm using 1.0.23-3 here and I'm facing similar issues. The device
is detected as
| uli@zox:~$ scanimage -L
| Failed cupsGetDevices
| device `smfp:usb;04E8;344F;Z72TB8KD4F00NFW' is a SAMSUNG SCX-3400 Series on
USB Scanner
(I'm not sure what the CUPS-output is doing there...). Any --mode
Hi!
I have just discovered what seems to be another aspect of this bug. If
you switch to click tab focus (Configuration/Focus Model/Click Tab
Focus), the window doesn't get focused when clicking on a tab.
Note that this requires external tabs, with internal tabs you can click
to change focus.
Hi!
I just stumbled across the same problem using 1.1.0~rc1+git20111210-7.
I'm not sure if that is the cause, but kfmclient is the KDE File
Manager client, as far as I know, so it seems that xdg-utils actually
depend on KDE. Could that be the reason?
Uli
--
To UNSUBSCRIBE, email to
Package: fluxbox
Version: 1.3.5-1
Severity: wishlist
Hi!
I believe that since a recent update of fluxbox in testing, you can't
click on window tabs any more in order to raise the window. Similarly,
though not as grave, you can't drag a tab onto a group in order to add
the window to the group or
Package: thunar
Version: 1.2.3-4+b1
Severity: wishlist
I'm trying to access a filesystem on a different system using SSH. I
know that thunar supports this, but I can't get it to work or even
extract any meaningful error message. Just to make that clear: I'm not
running XFCE, just thunar inside a
I just tried dragging an image from thunar (1.2.3-4+b1, running without
XFCE) onto the demo field in both Iceweasel (10.0.12esr-1+nmu1) and
Chromium (26.0.1410.43-1). It works only in Chromium.
Just my 2cc.
Uli
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a
Yves-Alexis Perez wrote:
Actually you miss one suggests (from gvfs): gvfs-backends.
Can you install it and report back?
Ah yes, that one was indeed missing, and it works now! Can you please
add a note concerning this to /usr/share/doc/README.Debian? That would
have helped immensely! Other
Package: cutecom
Version: 0.22.0-2
When opening one of the serial ports fails, you only get the error that it
failed but not why, which is frustrating and not helpful. The typical faults
are that a port isn't there or that you don't have access permissions. The
following piece of code changes the
Package: geany
Version: 1.22+dfsg-2
With the default configuration, Geany uses tabs to indent Python sources.
According to Python's coding guidelines (PEP 8), sources should not use any
tabs but exactly four spaces. As a workaround, you can manually switch to
spaces under Document Indent Type
Package: svn-load
Version: 1.3-1
I'm trying to load a directory containing non-ASCII filenames, which fails. I'm
pretty sure that the encoding is proper UTF-8 and that the locale is set up
correctly. I have manually verified the encoding and tools like e.g. ls and
thunar also handle it. If you
Package: smartmontools
Version: 5.41+svn3365-1
I have a portable hard drive, a WD my passport. Recently, after
disconnecting, smart-notifier started giving me regular warnings about not
being able to access the disconnected device. Since the device is
disconnected, this is little surprising
Package: python-pyinotify
Version: 0.9.3-1
If you import the pyinotify module and invoke help(pyinotify), you get the
following output:
| MODULE DOCS
| http://docs.python.org/library/pyinotify
This link doesn't exist, pyinotify is not (yet?) part of upstream's standard
library.
Uli
--
Package: thunar
Version: 1.2.3-3
There are two observations which are related, I guess. I'm using the detailed
list view (Control-2). The columns displayed are Name, Date Modified,
Size. I have checked Automatically expand columns as needed in the
configuration.
Case I: Here, the size of the
On Sunday 25 March 2012 14:05:28 Yves-Alexis Perez wrote:
forwarded 665700 https://bugzilla.xfce.org/show_bug.cgi?id=8597
thanks
On dim., 2012-03-25 at 11:40 +0200, Ulrich Eckhardt wrote:
Package: thunar
Version: 1.2.3-3
There are two observations which are related, I guess. I'm
Package: libasound2
Version: 1.0.25-2
snd_mixer_selem_has_capture_channel() should return 0 or 1, depending on
whether the element has a capture channel. However, it also regularly returns
-22 (-EINVAL) here for mixers that are output-only. This not only differs from
the documentation, but
Package: fluxbox
Version: 1.3.2-2
Following steps to reproduce the problem:
1. install fspanel (0.7-10) and alsamixergui (0.9.0rc2-1-9.1)
2. start alsamixergui
3. right-click on its titlebar - remember - position
4. start fspanel
Initially, fspanel is now positioned on top of the ALSA mixer. The
Here's a patch against the Debian sources. The modifications go beyond just
this bug, I discovered a few others on the way. Changes:
1. Set WM_CLASS property. See #660461 for a reason why.
2. Fix some indention mistakes and typos.
3. Handle sticky windows (desktop=-1) as visible everywhere
4.
--- fspanel-0.7/fspanel.c 2012-02-19 13:32:54.0 +0100
+++ fspanel.c 2012-02-19 13:59:12.0 +0100
@@ -38,6 +38,14 @@
Display *dd;
Window root_win;
+/* WM supports EWMH
+This flag is set if the window manager supports the EWMH protocol for e.g.
+switching workspaces. The fallback
Package: fspanel
Version: 0.7-10
When using a contemporary fluxbox (1.3.2) as window manager, fspanel fails in
at least two ways:
1. It gets hidden by other windows, although it should be on top of everything
but fullscreen apps.
2. The two up/down buttons to switch desktops don't work.
Note
...in the new 1.3.2-2, verified on one PowerPC system and another x86 system.
I'm wondering, is there a problem with either the description of the problem
or the patch?
Cheers!
Uli
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble?
On Thursday 29 December 2011 01:20:43 you wrote:
Sorry for the big delay, there are new efforts to try to maintain SDL
packages in better shape.
This bug seems to have been fixed long ago (Thu Apr 20 16:48:25 2006
+, about 9 months before this Debian bug report was submitted), in
this
Package: aptsh
Version: 0.0.7+nmu2
Entering remove foo tries to remove foo. Entering remove foo complains
about not being able to find e, remove foo complains about not being
able to finde ve. It seems like after detecting the remove token, it
simply skips ahead six chars from the beginning
Hi!
I guess the very strange KMail error mentioned in [1] is actually
described in [2], right? In any case, I can also confirm that in
testing, current kmail (4:4.4.11.1+l10n-1) with libsasl
( 2.1.24~rc1.dfsg1+cvs2011) is still broken. I've tried version
2.1.25 from [3], too, but it doesn't fix
On Tuesday 30 August 2011 22:32:31 Mike Hommey wrote:
How big is the ~/.mozilla/firefox/*/sessionstore.js file ?
uli@fruitbox:~$ ll ~/.mozilla/firefox/*/sessionstore.js
-rw--- 1 uli uli 305k Aug 30 21:43
/home/uli/.mozilla/firefox/xzqx6a0f.default/sessionstore.js
305k on one line .. is
On Wednesday 31 August 2011 08:18:02 Mike Hommey wrote:
Another thing I can think of that could explain your symptoms is if you
have ipv6 enabled, but ipv6 doesn't actually work. I'd suggest you try
to disable ipv6 (about:config, network.dns.disableIPv6) and see how it
goes from there.
Tried
Package: iceweasel
Version: 5.0-6
Severity: important
Iceweasel regularly hangs while loading pages. Many pages show the
symptoms, though never regularly. I haven't determined if some do and
some don't. It could also be that some advertisments that are being
randomly served influence the issue.
Package: fluxbox
Version: 1.3.1~dfsg1-2
The history management of fbrun is broken. The most obvious symptom is that
after starting something with it, the next time fbrun is started the cursor up
button doesn't reproduce that command. While one could argue that this is
still subjective, there
There are two changes in this patch:
1. Loading the history, the code used
while (!infile.eof()) {
getline(infile, ...);
...
}
That's simply wrong, because it will read one superfluous empty line at the
end. You need to check if reading succeeded instead of checking if the
Hi!
It seems there is a setting that tells fluxbox to ignore or not ignore the
tabs when maximizing, it is under the Tab Options and called Maximize
Over. With that deactivated, windows are now maximized as expected.
Uli
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
Package: fluxbox
Version: 1.3.1~dfsg1-2
I can tell fluxbox to use a different configuration file:
$ fluxbox -help
[...]
-rc stringuse alternate resource file.
[...]
This works to the extent that if I specify a different path, it will actually
use it. However, and
Package: fluxbox
Version: 1.3.1~dfsg1-2
The attached file is an excerpt from a program. It creates a single window,
undecorated, on top of other windows and in the upper left corner of the
screen. At least it should do that, and it used to. At the moment, it only
achieves parts of this, the
Package: konqueror
Version: 4:4.4.5-3
Note up front: This is probably not only a problem with konqueror but also
with other KDE parts, but it hit me most with konqueror.
The problem is that konqueror caches files in /var/tmp/ from webbrowsing,
which are never cleaned up. I recently removed a
Package: kdelibs4c2a
Version: 4:3.5.10.dfsg.1-5
TEMPDIR is the canonical Unix way to specify the location for temporary files.
lnusertemp doesn't honour this environment variable and simply creates these
files in /tmp or /var/tmp.
As a workaround, you can set KDETMP and KDEVARTMP, as per
Package: fluxbox
Version: 1.3.1~dfsg1-2
Problem:
The simple procedure to reproduce the problem is to run
xterm -e false
in a shell (xterm -e false works, too). This will create an xterm that is
immediately closed again. Sometimes, this window will get stuck. Checking the
output of ps
...using version 1.3.1~dfsg1-2.
Also, just wondering, was this forwarded upstream yet?
Cheers!
Uli
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Hi!
I'm running icewm 1.3.7-1 here and blast 1.1-22 here and windows don't close
their holes again when they are moved. When they are resized, they will close
the holes though.
That said, I'm not sure I would call this behaviour a bug though.
Cheers!
Uli
--
To UNSUBSCRIBE, email to
Package: icewm
Version: 1.3.7-1
In the panel/taskbar/system tray is a small applet displaying the CPU load. If
you hover the mouse over it, you get a tooltip window displaying various
information textually:
1. CPU Load: 0.58 0.97 1.04, 270
I can recognize the first three and know where to look
Package: kmail
Version: 4:4.4.7-3
Hi!
Since quite some time (roughly since the transition of testing to KDE 4, I
believe) there haven't been any menu entries for most KDE applications, like
dolphin, konqueror, knode and kmail. Interestingly k3b and ktorrent have menu
entries, but I believe
I tried versions 1:3.6.1-4 (unstable) and 1:3.6.99svn11761-1 (experimental).
Neither of these three bugs were reproducible with these two versions.
Good job, thank you! :)
Uli
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble?
On Tuesday 10 May 2011 20:45:32 Pierre Habouzit wrote:
I'm unable to reproduce. valgrind is actually a shell script that does
what it has to wrt LD_LIBRARY_PATH, are you sure you can reproduce? what
do you set in your LD_LIBRARY_PATH, please give steps to reproduce.
I'm not using
Package: libevas1
Version: 1.0.0-1
Hi!
Firstly, thanks for packaging this, I'm thrilled to try out what the
Enlightenment team has created. For that reason, I installed python-evas and
started toying with it. However, none of the examples I tried worked, and that
for the simple reason that I
On Saturday 26 February 2011 12:29:37 you wrote:
is it going better in squeeze or sid?
I just switched to 24BPP and EXA, and the artifacts are still there. Switching
to XAA fixes the issues again. The version of xserver-xorg-video-radeon is
1:6.13.1-2+squeeze1.
Uli
--
To UNSUBSCRIBE,
Package: knode
Version: 4:4.4.7-2
Since a few days, knode fails to send postings to at least some newsgroup. The
group in question that doesn't work is comp.lang.c++. A group that does work
is de.test. When sending, I get Could not write to file news.hansenet.de,
which is my newsserver!?
Further
Package: pavucontrol
Version: 0.9.9-1
When trying to start pavucontrol, it gave me the error Connection failed:
connection refused. This is rather unhelpful, since the problem is that the
pulseaudio package is not installed (shouldn't it depend on it?) and that it
therefore can't start the
On Saturday 25 December 2010 19:26:44 you wrote:
It looks like the symptom that you describe is likely a sound driver
issue.
Depending on what you call a driver, I agree. The point is that plain ALSA
output without pulseaudio works, so that part of the driver stack is not the
problem.
Hi!
I recently noticed that the problem seems to be gone.
I then downloaded and installed fluxbox_1.1.1+dfsg2-1_powerpc.deb, restarted
fluxbox, and the problem reappeared, so that version is affected.
Installing fluxbox_1.1.1+git20100908.df2f51b-2_powerpc.deb again, the effect
is gone again,
Package: kompare
Version: 4:4.4.5-1
I'm looking at a kompare window opened by kdesvn when selecting diff local
changes there. 'ps aux' says the commandline is kompare -on -. The button
to revert all changes to the file (Apply All) is deactivated until I select
a specific change in the file, it
Package: kompare
Version: 4:4.4.5-1
Under the Settings menu, there is an option Show Text View. There are
several things surprising with this text view:
1. The option is not saved anywhere, so if I select the text view, close
kompare and reopen it, the text view is gone and I have to activate
Package: kompare
Version: 4:4.4.5-1
When I just start kompare without any arguments, it outputs the following
two errors on the terminal window:
kompare(2276)/kdecore (KLibrary) findLibraryInternal: plugins should not have
a 'lib' prefix: libkomparepart.so
kompare(2276)/kdecore (KLibrary)
Package: ltrace
Version: 0.5.3-2.1
Severity: important
Consider this three-liner:
#include iostream
int main()
{}
Compiled with g++ x.cpp and run with ltrace ./a.out, I get the
following output:
_start(1, 0xbfb13834, 0xbfb1383c, 0xbfb138d4, 0x4800f930 unfinished ...
Package: valgrind
Version: 1:3.6.0~svn11254+nmu1
Severity: important
Hi!
Valgrind is broken for PowerPC, just starting it without any further
command to run already causes a segmentation fault. Running it on any
executable has the same problem.
There is a patch available, the simple recipe
Greetings!
I'm facing the same problem, but:
1. valgrind's version is 1:3.6.0~svn11254+nmu1
2. libc6-dbg's version is 2.11.2-7
3. valgrind actually depends on libc6-dbg, so uninstalling is not a viable
workaround.
Cheers!
Uli
--
To UNSUBSCRIBE, email to
FWIW, libc6-dbg's version is 2.11.2-7 here, valgrind's is
1:3.6.0~svn11254+nmu1.
Uli
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Since there obviously is no activity on Splix towards fixing this bug, I'd
like to point out that the Foomatic driver now supports the ML-1610, so
installing that instead of Splix gets you a working printer.
Uli
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a
Hi!
I'm just evaluating VLC as alternative to xine or mplayer, and I stumbled
across the same bug. However, in my case the file wasn't called a.avi but
داخلحماممغربي.flv, and picks up a bunch of files called *.txt or *.utf8.
Cheers!
Uli
--
To UNSUBSCRIBE, email to
Command line is
vlc http://dump.com/wp-content/uploads/golf.flv
There's a bunch of spurious warnings and errors and the video output is broken
(but it's like that for all videos, which is a different bug), but VLC works
without crashing.
Uli
--
To UNSUBSCRIBE, email to
Package: vlc
Version: 1.1.3-1
Greetings!
Any video I try to play is reduced in size and only on the left quarter of the
video area, the rest of the video area is black. Further, the colors in the
video are off, you can still recognize the content though. Lastly, there are
horizontal stripes,
Hi!
I'm just looking through bugs I filed, and this one is IMHO fixed or invalid.
As far as I'm concerned it was a user error, not a bug in the package.
Also sorry about the Reply-To in the initial mail, I had the wrong personality
selected in my mail client.
Thanks!
Uli
--
To
Package: fluxbox
Version: 1.1.1+git20100908.df2f51b-2
Hi!
The description of this is really that short, if you have tabs activated and
maximize a window, the window frame is resized to the screen's size (title
bar touching the top), but the tabs are sitting on top of this title bar, so
they are
Package: xcompmgr
Version: 1.1.5-1
Hi!
I'm writing a program that uses the SHAPE extensions to give a window a
non-rectangular shape. This works up to the point where I try to modify
the shape at runtime. The attached example program creates a simple
window of 50x50 pixels. It then creates a
Hi!
I noticed in a different context that fluxbow was sending superfluous expose
events when losing and gaining focus. These events are normally sent when
parts of a window were exposed and thus need redrawing. I guess these could be
responsible for the anomalous flickering.
The attached
Package: fluxbox
Version: 1.1.1+dfsg2-1
When moving between two windows and at the same time between groups, the focus
is not updated correctly. Following steps illustrate the setup:
* Delete your .fluxbox, I'm assuming a default configuration.
* Start fluxbox.
* In the Tab Options
Hi!
I just tried to reproduce this, but failed. The installed programs are a
current Debian testing:
fluxbox 1.1.1+dfsg2-1
tilda 0.09.6-2
conky-all 1.8.0-1
Uli
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
Package: stormbaancoureur
Version: 2.1.6-1
Hi!
The README mentions a .stormbaancoureur.keys.example file, but that is
apparently not part of the package. It would probably also be nice for Debian
beginners if it was not hidden, even if it must be stored as hidden file
eventually.
Cheers!
Package: alsamixergui
Version: 0.9.0rc2-1-9
Severity: whishlist
The attached patch allows using the mousewheel to increase/decrease the
volume.
Cheers!
Uli
--- alsamixergui-0.9.0rc2-1.orig/src/Fl_AM.cxx 2002-05-09 17:41:35.0 +0200
+++ src/Fl_AM.cxx 2010-08-06 20:15:06.0 +0200
Hi!
I got around to testing with video=radeonfb:off on the kernel commandline.
What you then get is a completely hanging system when switching terminale
(chvt), when trying to stop the login manager KDM or when logging out of an X
session. Note that this means that rebooting the system becomes
On Sunday 11 July 2010 10:05:08 Brice Goglin wrote:
What about the original problem (pixel columns switched when using XV,
with 16 or 24 bits color depth), is it gone now?
No, not really, but it doesn't affect me now.
If I understand correctly, what happened was that KMS broke DRI for X, so it
On Sunday 11 July 2010 10:12:23 Brice.Goglin wrote:
On Sun, Jan 31, 2010 at 02:14:33PM +0100, Ulrich Eckhardt wrote:
I have artifacts with colors being off and sometimes areas being filled
with black/white noise.
[...]
Assuming this is the problem you referred to at the end of
http
On Friday 09 July 2010 17:49:57 Michel Dänzer wrote:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=565313
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=567616
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=567793
The depth 16 issue could be fixed in xserver-xorg-video-radeon
On Friday 09 July 2010 14:56:39 Michel Dänzer wrote:
This is the reason for the DRI being disabled now:
(II) RADEON(0): Memory manager initialized to (0,0) (1728,4854)
(II) RADEON(0): Reserved area from (0,1680) to (1728,1682)
(II) RADEON(0): Largest offscreen area available: 1728 x 3172
On Monday 05 July 2010 09:03:53 you wrote:
On Sam, 2010-07-03 at 23:58 +0200, Ulrich Eckhardt wrote:
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
[dri] Disabling DRI.
It should work better with the DRI enabled.
Good catch, but shouldn't it work even without DRI?
Do
Package: xserver-xorg
Version: 1:7.5+6
Using mplayer and xine (didn't try others) with Xv as video output driver, I
have the effect that the order of pixel columns is switched. If I use 24 bits
color depth, the order is 1,0,3,2 etc. Using 16 bits color depth, the order is
3,2,1,0,7,6,5,4.
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 Dec 10 2007 /etc/X11/X - /usr/bin/Xorg
-rwxr-xr-x 1 root root 1940408 Jun 3 18:28 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not
Package: apcupsd
Version: 3.14.5-2
There is a manpage source file in package apcupsd-doc, installed as
apctest.man, which should probably be compiled and installed as manpage
instead. There is also a file called apcupsd.man in the same folder, which
seems to be the source file for the supplied
Package: mmv
Version: 1.01b-15
I just tried to rename a bunch of directories:
$ mmv -v DSide-* DSide #1
DSide-* - DSide #1 : no match.
Nothing done.
This is completely unhelpful, as the error no match seems to indicate the
match string was wrong. Only after many fruitless attempts and
Package: webcam
Version: 3.95.dfsg.1-8.1
'webcam' adds a text containing a timestamp by default. This text can not be
turned off, if you specify an empty text in the configuration file, you only
get a message telling you that there's a syntax error on that line and the
value is reverted to the
Firstly, I still can't play consecutive Flash videos. Note that this only
applies to Flash videos, not other types of videos, in case that wasn't clear.
Further, when while xine is idle (either after finishing one or on startup)
and then I drag'n'drop another file onto xine, it takes around ten
Package: tint
Version: 0.03b
TINT is not usable e.g. on a Dvorak keyboard, it assumes that the keys JKL are
arranged in a way similar to how the cursor keys are arranged. By default, it
should use the cursor keys instead of JKL, their arrangement is more portable
between different keyboards.
Package: libxine1-bin
Version: 1.1.17-1+b1
Hi!
When opening empty files with xine, it reports:
This is xine (X11 gui) - a free video player v0.99.6cvs.
(c) 2000-2007 The xine Team.
system call fstat: Bad file descriptor
system call fstat: Bad file descriptor
call failed
object not
Greetings!
After some hacking, I think I found the culprit, it is the algorithm that
linebreaks text in order to fit it into the given width of a dialog box. When
a single word (e.g. a path) is so long it doesn't fit into a line on its own,
it tries to step back to the last whitespace first,
On Thursday 18 February 2010 14:54:27 Ana Guerrero wrote:
After a quick chat with Antonis by IRC he told me he has tried to reproduce
the bug several times with a new version (4:4.3.4-1) and the bug was not
reproducible for it.
Ulrich, you reported it against 4:4.3.2-1, could you check with
Package: xine-ui
Version: 0.99.5+cvs2007
Hi!
I was looking at bug #510606 and started trying to reproduce it.
However, I can't see exactly the behaviour the original reporter described,
but I see that xine gets a bit picky with long filenames, empty files and
invalid paths, so I decided to
Hi!
Since an update yesterday (I'm running testing here), I'm seeing the same
effect here. I can also work around this by switching to 24 bits color depth.
Anyway, some info on this system here:
- Mac Mini with a G4 PowerPC CPU
- Radeon graphics chip, 'lspci' says VGA compatible controller:
The title would translate to nv nvidia driver: refresh rate from 60 to 50.
mein Problem: die Wiederholrate wird beim nv-Treiber auf 60Hz gesetzt und
bei dem nvidia-Treiber auf 50Hz gesetzt. das führt dazu, das die Zeichen
plötzlich verdoppelt werden.
My problem: The refresh rate is set to 60Hz
Hi!
I think that
16 bit colour on M64 gives green tinted screen
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=565313
new update has problem using DefaultDepth 16 in xorgs config
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=567616
actually describe the same problem.
Uli
--
To
Package: scrounge-ntfs
Version: 0.9-6
Simple patch:
- http://memberwebs.com/swalter/software/scrounge/
+ http://memberwebs.com/stef/software/scrounge/
For the record, the URL on the package's page at Debian's is correct.
Cheers!
Uli
--
To UNSUBSCRIBE, email to
Package: cryptsetup
Version: 2:1.1.0~rc2-1
I tried activating an encrypted partition as normal user, and it gave
me this:
u...@fruitbox:~$ cryptdisks_start hda5
Starting crypto disk...hda5 (skipped, device /dev/hda5 does not
exist)...failed.
u...@fruitbox:~$ ls /dev/hda
hda hda1 hda2
Mine aren't as severe, but at least they are enough to crash my X server, see
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=561331.
Further, also with a radeon card, I'm suffering a randomly corrupted cursor
when moving between two windows ... I'll file a separate report unless already
done
I tried the simple SDL_Init/SDL_Quit example from [1] and it doesn't crash. I
also tried running tuxpaint, not crashing my machine either. The system is a
current testing system, also on a Mac Mini G4.
Attached is the xorg.conf file, notable differences are:
- The whole Module section.
- In
Well, I think all involved parties made clear what their position on that
matter is. I hope no hard feelings remain.
That said, behave like GNU ls as an explicit goal is a good idea regardless.
With that in mind, I just hacked together exactly that, see attached patch.
Uli
diff -upwr
Package: tree
Version: 1.5.2.2-1
Actually there are several aspects to this bug, which is also related
to #556186[1]:
1. The prefix for thousand is k, not K, all others are correctly
capitalized.
2. The prefix k means one thousand. Abusing it for 1024 is just that -
abuse[2]. Note that the
1 - 100 of 195 matches
Mail list logo