Bug#765109: fglrx-driver: Black screen after xorg startup

2016-01-29 Thread Andreas Beckmann
Please try again with the 15.12 driver that is now available in
unstable, testing, and jessie-backports.
Or the 15.9 driver that is now in jessie.

Thanks.

Andreas



Bug#765109: fglrx-driver: Black screen after xorg startup

2015-04-27 Thread Pascal Ognibene
Dear maintainers,

I have the same problem here. 2 cards AMD R285X in my PC, black screen
after installing the 14.9 fglrx drivers from jessie (the open source
default driver works, but I need OpenCl acceleration from fglrx).

I installed the 14.12 drivers from experimental, got the same result.

The radeon module is blacklisted properly. I can't see what's wrong. The
only suspicious things i can find in the xorg logs are messages like :

[14.919] ukiOpenDevice: open result is -1, (No such device)
[14.919] ukiOpenDevice: open result is -1, (No such device)
[14.919] ukiOpenDevice: Open failed


but the initialization seems to continue and ends with these lines:

[21.794] (II) fglrx(0): EDID vendor ACI, prod id 6628
[21.794] (II) fglrx(0): Using EDID range info for horizontal sync
[21.794] (II) fglrx(0): Using EDID range info for vertical refresh
[21.794] (II) fglrx(0): Printing DDC gathered Modelines:
[21.794] (II) fglrx(0): Modeline 1366x768x0.0   85.50  1366 1436 1579
1792  768 771 774 798 +hsync +vsync (47.7 kHz eP)
[21.794] (II) fglrx(0): Modeline 800x600x0.0   40.00  800 840 968
1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[21.794] (II) fglrx(0): Modeline 800x600x0.0   36.00  800 824 896
1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[21.794] (II) fglrx(0): Modeline 640x480x0.0   31.50  640 656 720
840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[21.794] (II) fglrx(0): Modeline 640x480x0.0   31.50  640 664 704
832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[21.794] (II) fglrx(0): Modeline 640x480x0.0   25.18  640 656 752
800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[21.794] (II) fglrx(0): Modeline 720x400x0.0   28.32  720 738 846
900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[21.794] (II) fglrx(0): Modeline 1280x1024x0.0  135.00  1280 1296
1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[21.794] (II) fglrx(0): Modeline 1024x768x0.0   75.00  1024 1048 1184
1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[21.794] (II) fglrx(0): Modeline 1024x768x0.0   65.00  1024 1048 1184
1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[21.794] (II) fglrx(0): Modeline 800x600x0.0   49.50  800 816 896
1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[21.794] (II) fglrx(0): Modeline 800x600x0.0   50.00  800 856 976
1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[21.794] (II) fglrx(0): Modeline 1152x864x0.0  108.00  1152 1216 1344
1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[21.794] (II) fglrx(0): Modeline 1280x960x0.0  108.00  1280 1376 1488
1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[21.794] (II) fglrx(0): Modeline 1280x800x0.0   83.50  1280 1352 1480
1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[21.794] (II) fglrx(0): Modeline 1280x720x60.0   74.48  1280 1336
1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)

Currently, this means my server has just gone as useful as a brick. I'll be
happy to help if I can run specific tests on my machine.

Best,

Pascal


Bug#765109: fglrx-driver: Black screen after xorg startup

2015-01-01 Thread Vincent Alquier
Hello all, and also, Happy New Year !

I believe I have the same issue and I also have hybrid graphics. On boot,
when using fglrx display drivers, gdm shows a black screen (when I should
have the login screen). I have no error in /var/log/Xorg.0.log (except a
segmentation fault when I stop gdm).

As I can run graphical hardware accelerated applications using a dedicated
Xorg instance, I think the problem is gdm related. In fact I think your bug
(and mine) is a duplicate of #745901
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=745901.

Mathieu, can you run the following tests ?

Using fglrx driver, gdm not running, run this command from a random tty as
a normal user (= not root) :

/usr/bin/xinit /usr/bin/chromium

Instead of chromium, you can try other graphical application. I was
succesfull with chromium, steam (and even running games) and kodi (=xbmc).
This test should work correctly.

Then try running the same test with a gnome application which depends on
clutter (like totem).

/usr/bin/xinit /usr/bin/totem

If it gives you the following error, then your bug, is a duplicate of
#745901 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=745901.

(gnome-shell:3461): GLib-CRITICAL **: g_strsplit: assertion 'string !=
NULL' failed
(gnome-shell:3461): Clutter-CRITICAL **: Unable to initialize Clutter:
The OpenGL version could not be determined
Erreur du gestionnaire de fenêtres : Unable to initialize Clutter.

Thanks


Bug#765109: fglrx-driver: Black screen after xorg startup

2014-12-22 Thread Mathieu Pourcel
I thought the blacklist of radeon was done in /etc/modprobe.d/ by fglrx 
driver installation .. I will retry and check ;)
Maybe my problem is also that I don't success in disabling hybrid 
graphic (it's unchecked in BIOS, but ... ), so the i915 intel vga 
driver is also used. :(


--
---
Mathieu POURCEL
Technicien systèmes et réseaux
LEGOS - UMR 5566
Bureau 41 / D033
Observatoire Midi-Pyrénées
14, avenue Edouard Belin 31400 Toulouse
tel : : +33 (0)5 61 33 29 41
fax : : +33 (0)5 61 25 32 05


--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org



Bug#765109: fglrx-driver: Black screen after xorg startup

2014-12-21 Thread Mathieu Pourcel
On Sat, 20 Dec 2014 15:47:57 + Vitor Antunes vitor@gmail.com 
wrote:
 Working properly now and portal is even faster than when using 
standard amd

 packaged drivers.
 Thanks for the update!
 Vitor
Don't work for me, still same error and blank screen after fglrx update 
to experimental version.

My configuration : notebook hp elitebook 840 G1, card :
03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. 
[AMD/ATI] Mars [Radeon HD 8730M] (prog-if 00 [VGA controller])

Subsystem: Hewlett-Packard Company Device 1990
Flags: bus master, fast devsel, latency 0, IRQ 71
Memory at b000 (64-bit, prefetchable) [size=256M]
Memory at d050 (64-bit, non-prefetchable) [size=256K]
I/O ports at 3000 [size=256]
Expansion ROM at d056 [disabled] [size=128K]
Capabilities: access denied
Kernel driver in use: radeon


--
--
Mathieu Pourcel
Technicien systèmes et réseau
LEGOS, bureau 41
Observatoire Midi-Pyrénées
14, avenue Edouard Belin
31400 Toulouse
tel : 05 61 33 29 41
fax : 05 61 25 32 05


--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org



Bug#765109: fglrx-driver: Black screen after xorg startup

2014-12-21 Thread Vitor Antunes
You need to blacklist the radeon driver, so that fglrx is loaded instead.


Bug#765109: fglrx-driver: Black screen after xorg startup

2014-12-20 Thread Vitor Antunes
Working properly now and portal is even faster than when using standard amd
packaged drivers.
Thanks for the update!
Vitor


Bug#765109: fglrx-driver: Black screen after xorg startup

2014-12-17 Thread Andreas Beckmann
Hi,

I just uploaded 1:14.12-1 to experimental. Please give it a try.


Andreas


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org



Bug#765109: +fglrx-driver:+Black+screen+after+xorg+startup

2014-12-09 Thread Rodrigo Oliveri
Dear maintainers

I have the exact same issue.

I install debían jessie for amd64 and got that blackscreen after installing
fglrx-drivers. I try to force resolution, nomodeset, acpi_OSI=, and all
other solutions found in bugtracking but no one works.

Tanks for your efforts


Bug#765109: fglrx-driver: Black screen after xorg startup

2014-12-05 Thread Michael Franzl
On Debian Jessie, I have the exact same issue with fglrx_dri.so not 
found in the above mentioned locations. Result is a blank screen.


Manual symlinking gets rid of the EE messages in Xorg.0.log, but blank 
screen remains.


I'm forced to go back to Intel CPU graphics.

My card: ATI Radeon HD 7750


--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org



Bug#765109: fglrx-driver: Black screen after xorg startup

2014-12-05 Thread Evan Benn
Package: fglrx-driver
Version: 1:14.9+ga14.201-2
Followup-For: Bug #765109

Dear Maintainer,

*** Reporter, please consider answering these questions, where appropriate ***

   * What led up to the situation?
New computer, installed fresh debian 7, installed fglrx-driver.
Graphics card not supported (R9 270X). Upgraded to jessie.
ran ati-config --initial. Black screen on startup. 
Tried a posted method of adding File field to xorg.conf.
Still Black screen. I can swap to terminal (ctrl-alt-f1).

-- Package-specific info:
Full fglrx package list:
ii  fglrx-atievent 1:14.9+ga14. amd64events daemon for the non-free AT
ii  fglrx-driver   1:14.9+ga14. amd64non-free ATI/AMD RadeonHD display
ii  fglrx-modules- 1:14.9+ga14. amd64dkms module source for the non-fr
ii  libfglrx:amd64 1:14.9+ga14. amd64non-free ATI/AMD RadeonHD display
ii  libfglrx-amdxv 1:14.9+ga14. amd64AMD XvBA (X-Video Bitstream Accel
ii  libgl1-fglrx-g 1:14.9+ga14. amd64proprietary libGL for the non-fre

VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. 
[AMD/ATI] Curacao XT [Radeon R9 270X] [1002:6810] (prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Device [1682:9275]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at e000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at f7e0 (64-bit, non-prefetchable) [size=256K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at f7e4 [disabled] [size=128K]
Capabilities: access denied
Kernel driver in use: fglrx_pci


DRM and fglrx Informations from dmesg:
[0.00] AGP: No AGP bridge found
[0.00] AGP: Checking aperture...
[0.00] AGP: No AGP bridge found
[0.528841] Linux agpgart interface v0.103
[1.719181] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, 
Starnberg, GERMANY' taints kernel.
[1.742019] 6[fglrx] Maximum main memory to use for locked dma buffers: 
7723 MBytes.
[1.742097] 6[fglrx]   vendor: 1002 device: 6810 count: 1
[1.742232] 6[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[1.742364] 6[fglrx] Kernel PAT support is enabled
[1.742374] 6[fglrx] module loaded - fglrx 14.20.7 [Sep  2 2014] with 1 
minors
[4.573759] fglrx_pci :01:00.0: irq 49 for MSI/MSI-X
[4.574139] 6[fglrx] Firegl kernel thread PID: 1038
[4.574270] 6[fglrx] Firegl kernel thread PID: 1039
[4.574388] 6[fglrx] Firegl kernel thread PID: 1040
[4.574460] 6[fglrx] IRQ 49 Enabled
[4.582095] 6[fglrx] Reserved FB block: Shared offset:0, size:100 
[4.582097] 6[fglrx] Reserved FB block: Unshared offset:f838000, size:4000 
[4.582098] 6[fglrx] Reserved FB block: Unshared offset:f83c000, 
size:4c4000 
[4.582099] 6[fglrx] Reserved FB block: Unshared offset:7ffef000, 
size:11000 

Xorg X server configuration file status:
-rw-r--r-- 1 root root 804 Dec  6 10:24 /etc/X11/xorg.conf

Contents of /etc/X11/xorg.conf:
Section Files
ModulePath /usr/lib/fglrx
ModulePath /usr/lib/xorg/modules
ModulePath /usr/lib/dri
EndSection

Section ServerLayout
Identifier aticonfig Layout
Screen  0  aticonfig-Screen[0]-0 0 0
EndSection

Section Module
EndSection

Section Monitor
Identifier   aticonfig-Monitor[0]-0
Option  VendorName ATI Proprietary Driver
Option  ModelName Generic Autodetecting Monitor
Option  DPMS true
EndSection

Section Device
Identifier  aticonfig-Device[0]-0
Driver  fglrx
BusID   PCI:1:0:0
EndSection

Section Screen
Identifier aticonfig-Screen[0]-0
Device aticonfig-Device[0]-0
Monitoraticonfig-Monitor[0]-0
DefaultDepth 24
SubSection Display
Viewport   0 0
Depth 24
EndSubSection
EndSection



Xorg X server log files on system:
-rw-r--r-- 1 root root 21054 Dec  6 10:09 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 21054 Dec  6 10:09 /var/log/Xorg.2.log
-rw-r--r-- 1 root root 21054 Dec  6 10:09 /var/log/Xorg.3.log
-rw-r--r-- 1 root root 21054 Dec  6 10:09 /var/log/Xorg.4.log
-rw-r--r-- 1 root root 21054 Dec  6 10:09 /var/log/Xorg.5.log
-rw-r--r-- 1 root root 46544 Dec  6 10:26 /var/log/Xorg.0.log

Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
[  2155.959] 
X.Org X Server 1.16.1.901 (1.16.2 RC 1)
Release Date: 2014-11-02
[  2155.959] X Protocol Version 11, Revision 0
[  2155.959] Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
[  2155.959] Current Operating System: Linux evanpc 3.16.0-4-amd64 #1 SMP 
Debian 3.16.7-2 (2014-11-06) x86_64
[  

Bug#765109: fglrx-driver: Black screen after xorg startup

2014-10-14 Thread Andreas Beckmann
Control: tag -1 upstream

On 2014-10-13 19:17, Emilian Nowak wrote:
 Dear Maintainer,
 I'm having problems starting my Xserver. Just after it starts the screen 
 remains black. I can switch back to console, restart the xserver, but it 
 doesn't help.
 I have tested on newlycreated xorg.conf using aticonfig --initial - Still 
 same effect.
 
 There is one error line in Xorg.0.log
 [ 4.541] (EE) AIGLX error: failed to open 
 /usr/X11R6/lib64/modules/dri/fglrx_dri.so, 
 error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared 
 object file: No such file or directory]
 [ 4.541] (EE) AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, 
 error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such 
 file or
  directory]
 [ 4.541] (EE) AIGLX error: failed to open 
 /usr/X11R6/lib/modules/dri/fglrx_dri.so, 
 error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared obje
 ct file: No such file or directory]
 
 I don't know if it is important, but anyway there is no such file in this 
 location accoring to apt-file search. 

I think these errors are false positives. There is a list of paths
searched for fglrx_dri.so and reporting the ones that don't contain it
as an error is just stupid ...
The next path in the list is /usr/lib/dri and the file is symlinked
there. (You could try to move the symlink away from there and should see
more errors and maybe a final one if the library could not be found
ultimately.)

Also this very much looks like a success:

 [ 12334.809] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX:
Initialized DRI GL provider for screen 0

Regarding your blank screen problem - I have no idea what could fix this.


Andreas


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org



Bug#765109: fglrx-driver: Black screen after xorg startup

2014-10-13 Thread Emilian Nowak
Package: fglrx-driver
Version: 1:14.9+ga14.201-1
Severity: grave
Justification: renders package unusable

Dear Maintainer,
I'm having problems starting my Xserver. Just after it starts the screen 
remains black. I can switch back to console, restart the xserver, but it 
doesn't help.
I have tested on newlycreated xorg.conf using aticonfig --initial - Still 
same effect.

There is one error line in Xorg.0.log
[ 4.541] (EE) AIGLX error: failed to open 
/usr/X11R6/lib64/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared 
object file: No such file or directory]
[ 4.541] (EE) AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, 
error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file 
or
 directory]
[ 4.541] (EE) AIGLX error: failed to open 
/usr/X11R6/lib/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared obje
ct file: No such file or directory]

I don't know if it is important, but anyway there is no such file in this 
location accoring to apt-file search. 

*** Reporter, please consider answering these questions, where appropriate ***

   * What led up to the situation?
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
   * What was the outcome of this action?
   * What outcome did you expect instead?

*** End of the template - remove these template lines ***


-- Package-specific info:
Full fglrx package list:
ii  fglrx-driver  1:14.9+ga14.201-1 amd64   
  non-free ATI/AMD RadeonHD display driver
ii  fglrx-kernel-3.16-2-amd64 1:14.6~ga14.201-1+3.1 amd64   
  FGLRX binary kernel module for Linux 3.16-2-amd64
ii  fglrx-modules-dkms1:14.9+ga14.201-1 amd64   
  dkms module source for the non-free ATI/AMD RadeonHD display driver
ii  fglrx-source  1:14.9+ga14.201-1 amd64   
  kernel module source for the non-free ATI/AMD RadeonHD display driver
ii  glx-alternative-fglrx 0.4.2 amd64   
  allows the selection of FGLRX as GLX provider
ii  libfglrx:amd641:14.9+ga14.201-1 amd64   
  non-free ATI/AMD RadeonHD display driver (runtime libraries)
ii  libfglrx-amdxvba1:amd64   1:14.9+ga14.201-1 amd64   
  AMD XvBA (X-Video Bitstream Acceleration) runtime libraries
ii  libgl1-fglrx-glx:amd641:14.9+ga14.201-1 amd64   
  proprietary libGL for the non-free ATI/AMD RadeonHD display driver
ii  xvba-va-driver0.8.0-9   amd64   
  XvBA-based backend for VA API (AMD fglrx implementation)

VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. 
[AMD/ATI] Turks GL [FirePro V4900] [1002:6749] (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:240a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at e000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at f7e2 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at f7e0 [disabled] [size=128K]
Capabilities: access denied
Kernel driver in use: fglrx_pci


DRM and fglrx Informations from dmesg:
[0.00] AGP: No AGP bridge found
[0.00] AGP: Checking aperture...
[0.00] AGP: No AGP bridge found
[0.602045] Linux agpgart interface v0.103
[2.028319] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, 
Starnberg, GERMANY' taints kernel.
[2.042986] 6[fglrx] Maximum main memory to use for locked dma buffers: 
15664 MBytes.
[2.043162] 6[fglrx]   vendor: 1002 device: 6749 count: 1
[2.043371] 6[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[2.043458] 6[fglrx] Kernel PAT support is enabled
[2.043471] 6[fglrx] module loaded - fglrx 14.20.7 [Sep  2 2014] with 1 
minors
[3.896131] fglrx_pci :01:00.0: irq 48 for MSI/MSI-X
[3.896757] 6[fglrx] Firegl kernel thread PID: 2644
[3.896867] 6[fglrx] Firegl kernel thread PID: 2645
[3.896977] 6[fglrx] Firegl kernel thread PID: 2646
[3.897075] 6[fglrx] IRQ 48 Enabled
[3.963536] 6[fglrx] Reserved FB block: Shared offset:0, size:100 
[3.963538] 6[fglrx] Reserved FB block: Unshared offset:f838000, size:4000 
[3.963539] 6[fglrx] Reserved FB block: Unshared offset:f83c000, 
size:4c4000 
[3.963540] 6[fglrx] Reserved FB block: Unshared offset:3fff4000, 
size:c000 

Xorg X server configuration file status:
-rw-r--r-- 1 root root 684 Oct 13 18:32 /etc/X11/xorg.conf

Contents of