Chris Lamb wrote:
tags 390433 + patch
thanks
Hi Gerrit,
You marked this bug as forwarded but I don't see anything on the mailing
list about it; should I just look harder?
Regards,
--
Chris Lamb, UK [EMAIL PROTECTED]
Dear Giridhar,
Could you please consider my patch for limit the used bandwidth for scp
part?
The scp command provides -l option which can be used to limit the
bandwidth. The unit is Kbits/sec, not Kbytes/sec.
I'm making a patch for this. Could you please check if it is possible to
included it
Package: v86d
Version: 0.1.5.2-1
Severity: normal
Hey,
I tried to use the new v86d from the initramfs so I could have a framebuffer
in early stages, but it doesn't work.
Logs say:
Aug 1 08:11:06 hidalgo kernel: agpgart: Detected an Intel 965GM Chipset.
Aug 1 08:11:06 hidalgo kernel: agpgart:
Package: libp11-0
Version: 0.2.3-2
Severity: wishlist
As a result of a vulnerability discovered against OpenSC [1], new
releases of the various elements of the project have been published.
Among those is a new version of libp11: 0.2.4. Would it be possible to
release a new version of the package
Howdy,
The patch has been merged upstream by Patrick McHardy, one of the
netfilter maintainers, so I assume it'll be merged into the official
tree eventually.
--
Matt http://ftbfs.org/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
Sander Marechal wrote:
marvin:/home/sander# apt-get -t experimental install
Nothing wrong here. The 2.4.0 driver from experimental has been built
for the Xserver 1.4.99 from experimental, which cannot work with drivers
from unstable. So either you upgrade most X packages to experimental
Package: akregator
Version: 4:3.5.9-5
Severity: normal
*** Please type your report below this line ***
I have a few problems with column width in the normal view mode.
Problem 1: Double-clicking on the border between 'Article' and 'Feed'
headings doesn't do anything. It should resize the
Package: netperf
Version: 2.4.4-5
Severity: normal
Hi,
The init script for netpref currently has runlevel S included in the
Default-Start section.
This causes netperf to start very early in the boot sequence. It's not
necessary to start
netperf that early.
The system also tries to start
tags 493162 patch
thanks
--- libxslt-1.1.24.orig/libexslt/crypto.c
+++ libxslt-1.1.24/libexslt/crypto.c
@@ -595,11 +595,13 @@
int str_len = 0, bin_len = 0, hex_len = 0;
xmlChar *key = NULL, *str = NULL, *padkey = NULL;
xmlChar *bin = NULL, *hex = NULL;
+xsltTransformContextPtr
NEW VACANCIES !!!
Charlton Finance's premiere marketing and distribution firm, is continuing to
expand. We are planning to open a series of branches in USA and are in need of
new managers with fresh ideas.
We provide salary based compensation and all openings are entry - level, ideal
for
Package: qa.debian.org
Severity: wishlist
User: [EMAIL PROTECTED]
Usertags: pts
Hi,
The PTS currently displays stable and stable security updates in the left
column. I think it would be worthwhile to include testing security updates
aswell if available.
thanks,
Thijs
pgpbxXqXeoq4E.pgp
NEW VACANCIES !!!
Charlton Finance's premiere marketing and distribution firm, is continuing to
expand. We are planning to open a series of branches in USA and are in need of
new managers with fresh ideas.
We provide salary based compensation and all openings are entry - level, ideal
for
I've just been told that PAM version 1.0.1-1 is going in Lenny.
I would appreciate it if you could propose a package fixing this bug as a
candidate for Lenny.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hi Corsac,
On Fri, 01 Aug 2008 08:31:14 +0200 Yves-Alexis Perez wrote:
I tried to use the new v86d from the initramfs so I could have a framebuffer
in early stages, but it doesn't work.
[...]
Aug 1 08:11:06 hidalgo kernel: agpgart: Detected an Intel 965GM Chipset.
Aug 1 08:11:06 hidalgo
Package: kscope
Version: 1.6.1-1
Severity: normal
This bug could be closed with the reason that KDE4 is in experimental. ;-)
But it'd be very nice if we could have kscope working in KDE 4 too.
Currently kscope depends on libkateinterfaces.so.0 which is part of kate. But
with Kate from 4.1,
Am Donnerstag, den 31.07.2008, 20:57 + schrieb Debian BTS:
rdiff-backup (1.2.0-1) unstable; urgency=medium
.
* Merging upstream version 1.2.0
(Closes: #345627, #420869, #426110, #443686, #463035, #480785, #481098).
I did not test it 1.2.0 really fixes this bug, but in my
On Thu, Jul 31, 2008 at 06:11:01PM +0200, Marco d'Itri wrote:
On Jul 31, Teodor [EMAIL PROTECTED] wrote:
I think this can be fixed by depending on udev = 0.125 and hitting
both together in lenny. First you'll have to ask for a freeze
exception since this seems to be RC.
This is planned,
Junichi Uekawa scrisse in data 30/07/2008 09:16:
Yeah, looks like your http proxy is cutting things off at 32767 bytes.
In /usr/share/apt-listbugs/debian/bts.rb there is a value 'ParseStep =
200' which you can reduce to get the message going down. I'm not
quite sure how low you need to make it
Package: nss
Version: 3.12.0-4
With libsqlite3-dev 3.3.8-1.1 (backporting to Etch), the build fails:
gcc -o Linux2.6_x86_64_glibc_PTH_64_OPT.OBJ/sdb.o -c -Wall -pipe -Os
-g -fPIC -D_XOPEN_SOURCE -DLINUX1_2 -DLINUX2_1 -ansi -Wall
-Werror-implicit-function-declaration -Wno-switch -pipe
Package: wine
Version: 1.0.0-1
Severity: normal
Upstream contains a fix for etax2008, which is best included soon so
that Australian users can fill out their tax by October this year:
http://bugs.winehq.org/show_bug.cgi?id=14260
-- System Information:
Debian Release: lenny/sid
APT prefers
tag 490835 unreproducible
tag 490835 moreinfo
tag 490835 etch
thanks
Did you ever run netwatch before on this installation? Could you try
running on a different system?
It seems that not only netwatch is segfaulting but also other apps like
gaim. Are you sure this isn't a local (hardware)
Package: iceweasel
Version: 3.0.1-1
When the Quick Find bar in Iceweasel disappears after 5 seconds of
inactivity, that Iceweasel window is raised and gains focus even if I
have moved to a different window or a different workspace.
I'm using lenny and wmaker 0.92.0-8.
Eric
--
To
Hi!
On Thu, Jul 31, 2008 at 07:36:35PM -0700, Daniel Schepler wrote:
On Thursday 31 July 2008 10:34:22 Ana Guerrero wrote:
Hi Daniel,
On Wed, Jul 30, 2008 at 02:13:16PM -0700, Daniel Schepler wrote:
Package: kdeedu
Version: 4:4.1.0-1
Severity: serious
Hi, when I try to
On Thu, 2008-07-31 at 23:55 -0300, Herbert P Fortes Neto wrote:
Package: emdebian-tools
Version: 1.4.1
Severity: normal
Hi,
The usbutils-0.73 package fails to build because
of:
configure: loading cache ../i486-linux-gnu.cache
configure: error: `CFLAGS' has changed since the
Dear maintainer of libpam-ldap and Debian translators,
Some days ago, I sent a notice to the maintainer of the libpam-ldap Debian
package, mentioning the status of at least one old po-debconf translation
update in the BTS.
I announced the intent to build and possibly upload a non-maintainer
A typo was found during the proof review in debian-l10n-french.
Please use the attached file instead of the one originally sent.
fr.po
Description: application/gettext
signature.asc
Description: Digital signature
Package: ia32-libs-tools
Version: 11
Severity: serious
Your package fails to build on all buildds due to an empty binary-arch
target in debian/rules. Besides, the binary-indep target also does not
work on i386:
,
| $ fakeroot debian/rules binary
| [...]
| dh_gencontrol
| dpkg-gencontrol:
On Fri, Aug 01, 2008 at 09:11:05AM +0200, Thijs Kinkhorst [EMAIL PROTECTED]
wrote:
tags 493162 patch
thanks
Wouldn't a lot of the strings in this patch be better off allocated
on the stack?
Mike
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
Quoting Simon Paillard ([EMAIL PROTECTED]):
As asked by Nicolas and following a proofread process on -l10n-fr, here
is a new version of the french po file.
Christian asked to be in CC and will take care of the commit.
Yes, I've merge the hw-detect translations in my local copy of D-I SVN
On Friday 1 August 2008 10:09, you wrote:
On Fri, Aug 01, 2008 at 09:11:05AM +0200, Thijs Kinkhorst [EMAIL PROTECTED]
wrote:
tags 493162 patch
thanks
Wouldn't a lot of the strings in this patch be better off allocated
on the stack?
Sorry, I should have made it clearer that I was just
On Fri, Aug 01, 2008 at 10:19:32AM +0200, Thijs Kinkhorst [EMAIL PROTECTED]
wrote:
On Friday 1 August 2008 10:09, you wrote:
On Fri, Aug 01, 2008 at 09:11:05AM +0200, Thijs Kinkhorst [EMAIL
PROTECTED]
wrote:
tags 493162 patch
thanks
Wouldn't a lot of the strings in this patch be
US Airways files for bankruptcy, assets seized by creditors
http://www.urresti.es/top.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
The author of uvccapture just released a new version of uvccapture,
which also fixes the problem. I hope it can be updated here as well, as
the current version in lenny (0.4) is useless in its current state
Thanks.
--
Ing. A.C.J. van Amersfoort (Arno)
Electronics ICT Engineer
Package: cmake
Version: 2.6.0-5
Severity: grave
Justification: renders package unusable
When using cmake on a projet, got the following message:
cmake: /build/buildd/cmake-2.6.0/Source/cmLocalGenerator.cxx:2440: std::string
cmLocalGenerator::GetObjectFileNameWithoutTarget(const cmSourceFile,
Package: fakeroot
Version: 1.9.5
User: [EMAIL PROTECTED]
Usertags: kfreebsd
Hello,
there is a subtle error on GNU/kFreeBSD.
On GNU/kFreeBSD contrary to linux the non-root user is not allowed
to do chmod 1755 on regular files. The fakeroot does not cope with it.
The modes 2755 or 4755 and
Thanks Robert,
i am forwarding this to bug #492242 against memtest86+, which is about
the same issue.
Cheers,
Fabian
Robert Millan schrieb:
Hi Fabian
On Thu, Jul 31, 2008 at 06:04:07PM +0200, Fabian Greffrath wrote:
Hi Robert,
the following bug has been reported against my grub-invaders
On Fri, Aug 01, 2008 at 03:35:06AM -0400, Guido Günther wrote:
* hack in enough support for -s so we can update udev without
updating multipath-tools - this can probably be done by just
implementing -s as -d and simply doing a: s%^/block/%^/dev/% in
set_options if -s was set. I just did
Bomb blast rocks Staples Center, terrorists suspected
http://www.promo2.es/top.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: ttf-mph-2b-damase
Version: 001.000.dfsg.2-1
Severity: normal
In Unicode, the letters of the Coptic alphabet follow from U+2C80 in pairs[1].
That is, after U+2C80 COPTIC CAPITAL LETTER ALFA comes U+2C81 COPTIC SMALL
LETTER ALFA -- the small variant of the same letter.
However, in MPH 2B
Package: ksplash-engine-moodin
Severity: important
Version: 0.4.2-1
Tags: patch
User: [EMAIL PROTECTED]
Usertags: kfreebsd
Hello,
The current version fails to build on GNU/kFreeBSD,
because of outdated libtool.
Here is how to update the libtool in your package:
cp -f
Hi
Below is email from the linux-nfs mailing list with a patch to fix
problem
Thanks
- Forwarded message from Alex Samad [EMAIL PROTECTED] -
From: Alex Samad [EMAIL PROTECTED]
To: Neil Brown [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: mount issue with Mac OSX and
On Fri, Aug 01, 2008 at 10:36:54AM +0200, Yves Caniou wrote:
Package: cmake
Version: 2.6.0-5
Severity: grave
Justification: renders package unusable
When using cmake on a projet, got the following message:
cmake: /build/buildd/cmake-2.6.0/Source/cmLocalGenerator.cxx:2440: std::string
That patch is not correct.
Suspend with a swap file does not work with plain swsusp v1. Using
uswsusp hibernating to a swap file is correctly handled. I don't know if
tuxonice work or not with swap files.
Bye,
Emilio
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
On Fri, Aug 01, 2008 at 11:10:47AM +0200, Ana Guerrero wrote:
On Fri, Aug 01, 2008 at 10:36:54AM +0200, Yves Caniou wrote:
Package: cmake
Version: 2.6.0-5
Severity: grave
Justification: renders package unusable
When using cmake on a projet, got the following message:
cmake:
Package: libept
Version: 0.5.22
During build on Etch (backport):
test -x debian/rules
dh_testroot
rmdir obj-x86_64-linux-gnu
rmdir: obj-x86_64-linux-gnu: No such file or directory
make: [cleanbuilddir] Error 1 (ignored)
rm -rf obj-x86_64-linux-gnu
dh_clean
/usr/bin/make -C obj-x86_64-linux-gnu
Has the doctor been fooling around with your wife, find out here.
http://www.browsetomy.gmxhome.de/top.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hi
This is the patch I got from the linux-nfs mailing list, I have compiled
with the patch ( had to munge it a bit) and it fixes the problem
Thanks
- Forwarded message from Alex Samad [EMAIL PROTECTED] -
From: Alex Samad [EMAIL PROTECTED]
To: Neil Brown [EMAIL PROTECTED]
Cc: [EMAIL
Hi
Sorry this was mean for bug 492827
Alex
On Fri, Aug 01, 2008 at 07:00:20PM +1000, Alex Samad wrote:
Hi
Below is email from the linux-nfs mailing list with a patch to fix
problem
Thanks
- Forwarded message from Alex Samad [EMAIL PROTECTED] -
From: Alex Samad [EMAIL
The package is ready for review:
http://mentors.debian.net/cgi-bin/sponsor-pkglist?action=details;package=phpmyid
It is currently waiting for a sponsor.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Brice Goglin writes:
Sander Marechal wrote:
marvin:/home/sander# apt-get -t experimental install
Nothing wrong here. The 2.4.0 driver from experimental has been built
for the Xserver 1.4.99 from experimental, which cannot work with drivers
from unstable. So either you upgrade most X packages
Package: insserv
Version: 1.12.0-1
Severity: important
update-rc.d-insserv replaced with update-rc.d does not run by segmentation
fault. In 1.11.0-9, it runs correctly.
# update-rc.d.distrib foobar defaults
System startup links for /etc/init.d/foobar already exist.
# update-rc.d-insserv
Package: postfix-ldap
Version: 2.5.2-2
Severity: minor
See /usr/share/doc/postfix/html/LDAP_README.html
in /usr/share/doc/postfix-ldap/README.Debian,
but /usr/share/doc/postfix/html/LDAP_README.html does not found.
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT
Package: aptitude
Version: 0.4.11.8-1
During an attempt to backport aptitude to Etch, g++ printed the
following warning and aborted:
if g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../.. -I../../src
-I../../intl -DHELPDIR=\/usr/share/aptitude\
-DPKGDATADIR=\/usr/share/aptitude\ -g -O2
Better... how?
There're ways, but that doesn't matter. You may deal with this bug like
#441339 (wontfix and lower severity).
It looks like the submitter doesn't need ia32 software however. In that
case, it'd be nice to split the package.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
Debian Bug Tracking System a scris:
Thank you for filing a new Bug report with Debian.
An installation afterthought: I saw installed on my laptop toshset and radeontool. I know the second
is a recommends of both acpi-support and pm-utils, but toshset doesn't have any reverse deps or
Package: hal
Version: 0.5.11-2
When we start hal (/usr/sbin/hald) he doesn't start as a daemon, even
with --daemon=yes
aspire:/home/amine# hald --daemon=yes --verbose=yes
11:27:05.532 [I] hald.c:669: hal 0.5.11
11:27:05.532 [I] hald.c:678: Will daemonize
11:27:05.532 [I] hald.c:679: Becoming a
Did you know a condom can be used twice, learn the method here.
http://www.promo2.es/top.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
This bug has been fixed in 2.2.2 and in the trunk!
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: vzctl
Version: 3.0.22-9
Severity: normal
Tags: patch
The startup script /etc/init.d/vz is not executed in runlevel 4. It is a
common practice on Debian to start the services in runlevels 2345 and
stop it in runlevels 016. This patch should be enough:
piti:~# diff /etc/init.d/vz
[Jonny]
update-rc.d-insserv replaced with update-rc.d does not run by segmentation
fault. In 1.11.0-9, it runs correctly.
How strange. It worked during building in the test suite, and that is
a rather extensive test.
Can you try to run it under valgrind, ie. 'valgrind insserv', and see
why
On Mon, Jul 21, 2008 at 02:49:44PM +0200, Philipp Kern wrote:
./process.c:179: warning: assignment from incompatible pointer type
./process.c:183: error: 'LWP_SP' undeclared (first use in this function)
./process.c:183: error: (Each undeclared identifier is reported only once
martin,
On Thu, 31 Jul 2008, martin f krafft wrote:
File /usr/lib/python2.5/ConfigParser.py, line 511, in get
raise NoSectionError(section)
ConfigParser.NoSectionError: No section: 'sms'
Thanks - fixed in http://jppy.zanu.org.uk/trac/changeset/333
Nick
--
To UNSUBSCRIBE, email to
This happened agian, with intel 2:2.3.2-2 and libgl1-mesa-dri 7.0.3-5,
however it wasn't as fatal this time.
I ran stellarium, and the xserver froze for a few seconds before dieing.
Then it died and was restarted, but instead of locking the system up,
the xserver just died and was restarted
On Fri, Aug 01, 2008 at 11:23:28AM +0200, Javier Serrano Polo wrote:
There're ways, but that doesn't matter. You may deal with this bug like
#441339 (wontfix and lower severity).
By shipping an alternate dynamic linker and diverting files in
libc6-i386? What are these ways?
It looks like the
forwarded 489111 http://rt.cpan.org/Public/Bug/Display.html?id=37911
owner 489111 !
thanks
Hi,
according to upstream the test is for a feature that is not yet
implemented, but the test scripts don't have a way to mark them fixed
yet.
Regards,
Ansgar
--
PGP: 1024D/595FAD19 739E 2D09 0969 BEA9
Iceweasel 3.0.1-1 also crashes on startup on Alpha. First noted when
version 3.0~rc2-2 came through into Lenny and problem persists into
3.0.1-1. Indeed, Epiphany Web Browser (2.22.3-1) also crashes on startup!
Cheerz
Michael.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
reassign 493128 kde4libs
thanks
Just give can not open the file
and this file can be opened with evince
$ kmimetypefinder README_MIPS.pdf
text/x-readme
(accuracy 100)
reassinging to kdelibs, as the file is misrecognized.
--
Pino Toscano
signature.asc
Description: This is a digitally
Package: kmobiletools
Version: 0.4.3.2-2
Severity: normal
Installing kde-l10n-de when already having kmobiletools installed gives the
following output:
$ sudo aptitude
(Reading database ... 169846 files and directories currently installed.)
Removing kde-i18n-de ...
Package: systemsettings
Version: 4:4.1.0-1
Severity: normal
In systemsettings, the About Me section: I tried to change my name,
and was asked for my password, which I expected. But even though I write
the correct password, I get a window with title Sorry - Systemsettings
containing the message:
Hello,
Patrick, Adam, i do wonder whether this issue is related to:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=492610
I dont get any windows, the only thing I get is a little delay (2s) in kde
splash at Loading the window manager (not to mention borderless windows
later ofc). Its happen
Package: evolution
Version: 2.22.3.1-1
--- Please enter the report below this line. ---
Hi Carlos,
This is not an acceptable workaround. HTML messages with image links are quite
common today and most mail clients supports them. However, I've seen this
problem with huge mails containing no
Are there any news regarding this bug? The blocking bug 478191 is
apparently fixed now...
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
tag 489111 + pending
thanks
Some bugs are closed in revision 23721
by Ansgar Burchardt (ansgar-guest)
Commit message:
* Use quilt to apply patches; add debian/README.source to document usage
* Disable test for a feature not implemented yet (Closes: #489111)
* Add myself to Uploaders.
--
To
Package: brasero
Version: 0.8.0-1
Severity: serious
brasero missuses the va_list type. This type is opaque and no pointer.
See the alpha build log[1].
Bastian
[1]:
http://buildd.debian.org/fetch.cgi?pkg=braseroarch=alphaver=0.8.0-1stamp=1216663328file=logas=raw
--
Ahead warp factor one, Mr.
Hi Thomas,
On Thursday 31 July 2008 12:00, Thomas Lange wrote:
Thanks for the info. Future FAI versions will use 2.6.25 and aufs as
default. I will close this bug with an upload of a new version.
2.6.26 has been uploaded to unstable and is the targeted kernel for lenny.
(It's not sure yet, but
Hi,
going through some bugs against debbugs, I see that these bugs seem to
be fixed on bugs.debian.org – are they still open until they are put in
the debbugs package, or can they be closed?
Greetings,
Joachim
--
Joachim nomeata Breitner
Debian Developer
[EMAIL PROTECTED] | ICQ# 74513189 |
Hi,
this mail simulates bug voting :-)
I find Paul’s ideas very good, and thus am subscribing to this bug.
Greetings,
Joachim
--
Joachim nomeata Breitner
Debian Developer
[EMAIL PROTECTED] | ICQ# 74513189 | GPG-Keyid: 4743206C
JID: [EMAIL PROTECTED] | http://people.debian.org/~nomeata
Hi,
subscribing with gpg-signed mail would be nice.
Thanks,
Joachim
--
Joachim nomeata Breitner
Debian Developer
[EMAIL PROTECTED] | ICQ# 74513189 | GPG-Keyid: 4743206C
JID: [EMAIL PROTECTED] | http://people.debian.org/~nomeata
signature.asc
Description: Dies ist ein digital signierter
Package: brasero
Version: 0.7.1-1
Severity: serious
brasero has failed to build on alpha since version 0.7.1.
cc -DHAVE_CONFIG_H -I. -I.. -I.. -I..
-DBRASERO_LOCALE_DIR=\/usr/share/locale\ -DBRASERO_PREFIX=\/usr\
-DBRASERO_SYSCONFDIR=\/etc\ -DBRASERO_DATADIR=\/usr/share/brasero\
Package: trash-cli
Version: 0.1.10.28-2
Severity: important
Hi !
Whenever I try to use trash-cli operations (list-trash or empty-trash),
I get the following error:
$ list-trash
Traceback (most recent call last):
File /usr/bin/list-trash, line 5, in module
for trashedfile in
I built gcl 2.6.7-38 (after sysctl kernel.randomize_va_space=0) on
i386 kernel 2.6.25-7. The build went fine, but after I reboot, gcl is
not able to detect that sbrk is randomized and happily starts up. Of
course it does not work very well; the maxima build dies right away,
for example.
Package: config-manager
Version: 0.3-3.1
Severity: normal
As per bug #486730, pybaz is likely to be removed from the archive at
some point. config-manager should be modified so that it doesn't depend
on pybaz, to avoid a similar fate.
-- System Information:
Debian Release: lenny/sid
APT
Package: git-buildpackage
Version: 0.4.33
Severity: normal
Hello
I tryed to import all the current *.dsc of the lisaac package from the
debian repository.
In fact version 0.84 and 1:0.13.1
But the order done by import-dscs was in a wrong order.
It first import the 0.13.1 version before the
Package: texlive-latex-base
Version: 2007.dfsg.1-3
Severity: normal
This is a reopening of #95086, I'll close soon. The minimal example stays
the same:
\documentclass[a5paper]{article}
\usepackage[colorlinks]{hyperref}
\begin{document}
abc\footnote{def}\hyperlink{ghi}{jkl\newpage mno}
\vskip
On Sun, Jul 27, 2008 at 12:54:51PM +0200, Gregor Jasny wrote:
Hi,
Hi :)
today I've started to package libv4l. Open issues:
* Would it make sense to split the package into 3 libs, 3 -dev and maybe
2 preload libs? To me it seems to be pure overkill. Policy §8.1 seems to
allow stuffing
Package: libnfsidmap2
Version: 0.21-1
Severity: grave
Upgrading from 0.20-1 to 0.21-1 breaks rpc.idmapd:
$ sudo rpc.idmapd -f -v
rpc.idmapd: libnfsidmap: using domain: wgtn.ondioline.org
rpc.idmapd: libnfsidmap: processing 'Method' list
rpc.idmapd: libnfsidmap: Unable to load
Hi,
mercurial 1.0.1-3 (currently in lenny) is incompatible with
python-subversion = 1.5 (it works with python-subversion 1.4 that
is not in lenny anymore). This bug does not touch the core mercurial
operations but it prevents any conversion from subversion repository
to mercurial.
Upstream
Does the bug still apply to the 2.4.8-2 that is currently in Testing?
--
Martin-Éric Racine
http://q-funk.iki.fi
tags 493196 + patch
severity 493196 important
thanks
Hi,
Please, can you estimate whether it can be solved on fakeroot side ?
Now I know, it can.
The problem is that chmod() syscall family does not return EPERM, but
EFTYPE in this case on *BSD kernels. The linux does not have errno code
Package: udev
Version: 0.125
Severity: grave
Hi,
the removal of the /dev/.static/dev/ hack in 0.124-1 breaks labeled
mounts (via LABEL=...) and might leave people with an unbootable system.
Reason is that findfs and friends query /etc/blkid.tab to find the
device matching the UUID. Since
Package: gettext
Version: 0.17-3
Severity: important
to reproduce, just open a file test.py with only u'\udfff' in it, and
run xgettext t.py
we get a Aborted message
it works with \ud800 for exemple, doesn't work with \udffe.
This string isn't translatable, so why xgettext parse it? And why
Package: g15daemon
Version: 1.9.5.3-3
Severity: normal
Hello,
i have two problems : the first one is that g15daemon segfaults if
one only load lcd server plugin :
excerpt of g15daemon.conf
[PLUGINS]
LCDServer: Load
Clock: NoLoad
Linux UINPUT Keyboard Output: NoLoad
$ g15daemon -d 5
libg15:
Please, could you use attached patch.
No, please use this one, with changes like
+#ifdef EFTYPE /* available under FreeBSD kernel */
+ if(r(errno==EFTYPE))
+r=0;
+#endif
Sorry for the noise
Petr--- fakeroot-1.9.5.orig/libfakeroot.c
+++ fakeroot-1.9.5/libfakeroot.c
@@ -856,6
retitle 451183 emacs21: FTBFS on kfreebsd-amd64, emacs21-x unusable on
kfreebsd-i386
thanks
Hi,
the emacs21 also does not build on kfreebsd-amd64.
The previously attached patch solves both problems,
it is already integrated in upstream emacs22.
Please apply patch and regenerate configure.
If anyone has a patch to fix this, please add it to the bug.
I'll mention in passing that while upstream still is an active KDE
developer, numlockx itself hasn't seen any new release in a long time.
However, upstream still welcomes patches, such as the recent one I
submitted to autoreconf the
$ valgrind -v --leak-check=full --show-reachable=yes insserv
==554== Memcheck, a memory error detector.
==554== Copyright (C) 2002-2007, and GNU GPL'd, by Julian Seward et al.
==554== Using LibVEX rev 1854, a library for dynamic binary translation.
==554== Copyright (C) 2004-2007, and GNU GPL'd,
Package: beep
Severity: wishlist
Tags: l10n patch
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Please include attached updated translation file fi.po to the package.
Regards,
Esko Arajärvi
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.9 (GNU/Linux)
reassign 493216 e2fsprogs
thanks
On Aug 01, Guido Günther [EMAIL PROTECTED] wrote:
Reason is that findfs and friends query /etc/blkid.tab to find the
device matching the UUID. Since blkid.tab has things like
/dev/.static/dev/hda7 (no idea why blkid picked that one in favour of
/dev/hda7)
reassign 483324 babel
retitle 483324 libsidl-dev must depend on libparsifal-dev
thanks
For libtool to link with libsidl.la, libparsifal.la must be there.
With this change, illuminator will build.
-Adam
--
GPG fingerprint: D54D 1AEE B11C CE9B A02B C5DD 526F 01E8 564E E4B6
Engineering
On Wed, Jul 30, 2008 at 06:41:04PM -0400, Kevin Coffman wrote:
A new version of libnfsidmap is now available from
http://www.citi.umich.edu/projects/nfsv4/linux/libnfsidmap/libnfsidmap-0.21.tar.gz
Changes since libnfsidmap-0.20:
- The main library has been changed to load plugin libraries to
1 - 100 of 362 matches
Mail list logo