Ben Hutchings b...@decadent.org.uk wrote:
Hi,
Good luck with that, it's been tried already with EXPORT_SYMBOL_GPL()
and people still do work around that.
That is probably copyright infringement.
Maybe, maybe not. Nobody actually really knows.
It sounds like you should really be using
ow...@bugs.debian.org (Debian Bug Tracking System) wrote:
We never supported oot binary crap, nor do we intend to do.
closing, as you already got all the explanations.
For the record, VMware modules come as source.
JB.
--
Julien BLACHE - Debian GNU/Linux Developer - jbla...@debian.org
Package: initramfs-tools
Version: 0.98.6
Severity: important
-- Package-specific info:
-- initramfs sizes
-rw-r--r-- 1 root root 2.2M Dec 19 09:50 /boot/initrd.img-2.6.32-5-kirkwood
-- /proc/cmdline
console=ttyS0,115200 root=/dev/etherd/e0.1p1
-- resume
Coin,
I made a maintainance on the machine, and btw made a few tests. I
switched it off after reactivating the modules, switched it on again,
and the boot went well ; i then tried a few reboots, well again. I
made what i came for, and needed to reboot a few more times, and
everything was
On Sun, Dec 19, 2010 at 10:51:15AM +0100, Aad dame wrote:
-- no debconf information
Problem Description:
r...@squeezeserver:/usr/share/initramfs-tools# mkinitramfs -o /tmp/foo
mkinitramfs: for root /dev/etherd/e0.1p1 missing etherd/e /sys/block/ entry
mkinitramfs: workaround is MODULES=most
Processing commands for cont...@bugs.debian.org:
tags 607509 + pending
Bug #607509 [initramfs-tools] initramfs-tools: Does not work if root is on an
AOE device
Added tag(s) pending.
thanks
Stopping processing here.
Please contact me if you need assistance.
--
607509:
Package: linux-2.6
Version: 2.6.32-29
Severity: normal
When a TV without sound support via HDMI is used with HDMI all output is green
instead of blue. This happens with a LG Flatron MD2061D. You get a result like
this: http://www.hosthuis.nl/IMAG0401.jpg
A patch can be found here (From
Package: linux-2.6
Version: 2.6.32-29
Severity: normal
Tags: squeeze
Hi,
I wanted to start the GUI, but couldn't. After logging in, I usually say
'startx'. For this computer, which I have just installed, the command
resulted in the screen going blank, immediately followed by a hard reboot.
Package: linux-2.6.32
Severity: wishlist
*** Please type your report below this line ***
When i915 is installed with modeset=1 it is not possible to run svgalib.
(System crashes but can be restored by starting X11)
I strongly prefer to run in terminal mode with svgalib and therefore
I use
Package: linux-2.6.32
Version: 2.6.32-29
Severity: normal
*** Please type your report below this line ***
When rebooting I get a black screen sometimes when i915 is inserted by udev.
This happens almost always when rebooting from Windows XP. I boot into
terminal mode and I can log in on the
Package: linux-image-2.6.32-5-amd64
Severity: normal
--- Please enter the report below this line. ---
Hello,
I tried to setup IPv6 on a server which use ethernet bonding.
My host use eth0 and eth1 which combine into device bond0.
When I try to add an IPv6 address to bond0 (ip -6 addr add
Upgraded. The problem continues.
What more info you need?
2010/12/17 Ben Hutchings b...@decadent.org.uk
On Fri, 2010-12-17 at 10:26 -0200, Saulo Soares de Toledo wrote:
Package: linux-2.6
Version: 2.6.32-3
Upgrade to linux-image-2.6.32-5-686, version 2.6.32-29.
Severity: normal
On Sun, Dec 19, 2010 at 03:51:42PM -0200, Saulo Soares de Toledo wrote:
Upgraded. The problem continues.
What more info you need?
Check if newer linux-2.6 images fix it (you find them in experimental)
2.6.37-rcX
if yes which patch makes the diff and if not tell upstream on
Processing commands for cont...@bugs.debian.org:
reassign 607548 linux-2.6
Bug #607548 [linux-2.6.32] linux-image-2.6.32: Black screen when i915 is loaded
on Compaq 6510b
Warning: Unknown package 'linux-2.6.32'
Bug reassigned from package 'linux-2.6.32' to 'linux-2.6'.
Bug No longer marked as
reopen 607368
tags 607368 - wontfix
reassign 607368 tech-ctte
retitle 607368 Please decide how kernel ABI should be managed
thanks
Hi,
I am hereby asking the tech-ctte to decide how the kernel ABI should be
managed.
Case in point: the kernel team decided to ignore changes to the smp_ops
symbol
Processing commands for cont...@bugs.debian.org:
reopen 607368
Bug #607368 {Done: maximilian attems m...@stro.at} [src:linux-2.6] linux-2.6:
silent ABI change in 2.6.32.26 breaks external modules (smp_ops changes)
tags 607368 - wontfix
Bug #607368 [src:linux-2.6] linux-2.6: silent ABI change
On Sun, Dec 19, 2010 at 07:30:58PM +0100, Julien BLACHE wrote:
I am hereby asking the tech-ctte to decide how the kernel ABI should
be managed.
Hi Julien, from the bug log it's pretty clear that there was no
possibilities of agreement between you and the kernel team, so thanks
for bringing this
Package: initramfs-tools
Version: 0.98.6
Severity: grave
Tags: patch
Justification: renders package unusable
I just installed Debian (Sid) on my PC and was in for a nasty surprise; the
system wouldn't boot after install.
I have 2 disks setup in an ICH9R raid set, which devides these 2 disks in 2
Processing commands for cont...@bugs.debian.org:
tags 607565 - patch
Bug #607565 [initramfs-tools] initramfs-tools: initramfs fails to assemble
Intel RAID array
Removed tag(s) patch.
thanks
Stopping processing here.
Please contact me if you need assistance.
--
607565:
Processing commands for cont...@bugs.debian.org:
severity 607565 important
Bug #607565 [initramfs-tools] initramfs-tools: initramfs fails to assemble
Intel RAID array
Severity set to 'important' from 'grave'
thanks
Stopping processing here.
Please contact me if you need assistance.
--
reassign 607565 mdadm
stop
On Sun, Dec 19, 2010 at 08:47:28PM +0100, Rainmaker wrote:
Package: initramfs-tools
Version: 0.98.6
Severity: grave
Tags: patch
Justification: renders package unusable
No, not booting on a specific setup is bad, but doesn't render it
unusable for the big X nr of
Processing commands for cont...@bugs.debian.org:
reassign 607565 mdadm
Bug #607565 [initramfs-tools] initramfs-tools: initramfs fails to assemble
Intel RAID array
Bug reassigned from package 'initramfs-tools' to 'mdadm'.
Bug No longer marked as found in versions initramfs-tools/0.98.6.
stop
Your message dated Sun, 19 Dec 2010 21:14:30 +
with message-id 1292793270.2874.8.ca...@localhost
and subject line Re: Bug#607546: svgalib support
has caused the Debian Bug report #607546,
regarding svgalib support
to be marked as done.
This means that you claim that the problem has been dealt
On Sun, 2010-12-19 at 20:19 +0100, Stefano Zacchiroli wrote:
On Sun, Dec 19, 2010 at 07:30:58PM +0100, Julien BLACHE wrote:
I am hereby asking the tech-ctte to decide how the kernel ABI should
be managed.
Hi Julien, from the bug log it's pretty clear that there was no
possibilities of
Package: linux-2.6
Version: 2.6.32-29
Severity: normal
[ 16.409864]
/build/buildd-linux-2.6_2.6.32-29-i386-Of6Yt1/linux-2.6-2.6.32/debian/build/source_i386_none/drivers/hid/usbhid/hid-core.c:
usb_submit_urb(ctrl) failed
note the time on the previous log messages
-- Package-specific info:
On Sun, 2010-12-19 at 18:48 +0100, Sylvain Avril wrote:
Package: linux-image-2.6.32-5-amd64
Severity: normal
--- Please enter the report below this line. ---
Hello,
I tried to setup IPv6 on a server which use ethernet bonding.
My host use eth0 and eth1 which combine into device
Processing commands for cont...@bugs.debian.org:
reassign 607551 linux-2.6 2.6.32-29
Bug #607551 [linux-image-2.6.32-5-amd64] [linux-image-2.6.32-5-amd64] IPV6 and
ethernet bonding
Bug reassigned from package 'linux-image-2.6.32-5-amd64' to 'linux-2.6'.
Bug #607551 [linux-2.6]
On Sun, 2010-12-19 at 03:29 +, Philip Ashmore wrote:
Sorry - you need to invoke the script as
sh reproduce-bug.sh v3c-repo
This doesn't even build on i386. I'm not going to spend more time on it
unless you can provide a smaller test case.
Ben.
--
Ben Hutchings
Once a job is fouled
Processing commands for cont...@bugs.debian.org:
tags 607495 + moreinfo
Bug #607495 [linux-2.6] linux-image-2.6.32-5-amd64: kernel freeze
Added tag(s) moreinfo.
thanks
Stopping processing here.
Please contact me if you need assistance.
--
607495:
On 19/12/10 23:23, Ben Hutchings wrote:
On Sun, 2010-12-19 at 03:29 +, Philip Ashmore wrote:
Sorry - you need to invoke the script as
sh reproduce-bug.sh v3c-repo
This doesn't even build on i386. I'm not going to spend more time on it
unless you can provide a smaller test case.
Ben.
On Sun, Dec 19, 2010 at 08:19:22PM +0100, Stefano Zacchiroli wrote:
On Sun, Dec 19, 2010 at 07:30:58PM +0100, Julien BLACHE wrote:
I am hereby asking the tech-ctte to decide how the kernel ABI should
be managed.
Hi Julien, from the bug log it's pretty clear that there was no
possibilities
On Sun, 2010-12-19 at 23:37 +, Philip Ashmore wrote:
On 19/12/10 23:23, Ben Hutchings wrote:
On Sun, 2010-12-19 at 03:29 +, Philip Ashmore wrote:
Sorry - you need to invoke the script as
sh reproduce-bug.sh v3c-repo
This doesn't even build on i386. I'm not going to spend
Oops! Forgot to CC.
---BeginMessage---
Ben Hutchings wrote:
I didn't keep it. There are warnings about various format strings using
the wrong size (%ld for an argument of type size_t; should be %zd). Due
to use of -Werror these are fatal.
Ben.
I'll be the first to admit that treedb et al
Hi,
This was readily reproducible just now after a reboot, on the same
server and same kernel.
Upon boot, four exports of /var/lib/tftpboot were loaded from /etc/exports.
I then did:
# mount --bind /home/whatever /var/lib/tftpboot
# exportfs -ra
I hadn't actually altered /etc/exports since
34 matches
Mail list logo