Dear Ben,
It seems that the kernel without firmware is not able to load any
module. Probably, because the device I am using is 083a:a701 !! . Here
is the answer of the things you asked for (after dpkg --purge
firmware-ralink ):
readlink /sys/class/net/wlan0/device/driver
Dear Ben,
After reconfiguring kernel and rebooting and so on, results are
different (??). Here is the answer:
readlink /sys/class/net/wlan0/device/driver
---
--- (nothing)
/sbin/modinfo rt2870sta
---
filename:
On Sat, 2010-08-28 at 10:35 +0200, Wenceslao González-Viñas wrote:
Dear Ben,
It seems that the kernel without firmware is not able to load any
module. Probably, because the device I am using is 083a:a701 !! . Here
is the answer of the things you asked for (after dpkg --purge
Ok, I installed them again. Nothing happens (same results of last
email) until I type the following (that I got from the internet):
echo 'install rt2870sta modprobe --ignore-install rt2870sta ;
/bin/echo 083a a701 /sys/bus/usb/drivers/rt2870/new_id' | tee
/etc/modprobe.d/rt2870sta.conf
On Fri, 2010-08-27 at 10:15 +0200, Uwe Kleine-König wrote:
This might be related to
http://thread.gmane.org/gmane.linux.debian.devel.kernel/54624/
? Any news there?
Kel Modderman seems to have disappeared, haven't heard from him in a
long time.
If anyone else wants to join
On Sat, 2010-08-28 at 17:21 +0200, k...@otaku42.de wrote:
I have not disappeared.
My apologies, I hadn't received any RFS mail so I incorrectly assumed.
Nothing was ever sponsored, though multiple permutations of working
packages were produced and annoying problems were found and discussed
Package: firmware-ralink
Version: 0.26
Severity: important
I recently bought a Wifi stick (SMCWUSBS-N3) which uses the chip Ralink RT3070,
because they say it works in Linux. I tried to install the driver (through
firmware-ralink package and through compiling the driver ralink offers in their
Hello,
On Fri, Aug 27, 2010 at 09:29:22AM +0200, Wenceslao wrote:
Package: firmware-ralink
Version: 0.26
Severity: important
I recently bought a Wifi stick (SMCWUSBS-N3) which uses the chip Ralink
RT3070,
because they say it works in Linux. I tried to install the driver (through
Hello,
to tell you the truth I was scared at looking at the
http://thread.gmane.org/gmane.linux.debian.devel.kernel/54624/ . The
reason is that probably you are right, but unfortunately I am no such an
expert to get a solution from the thread.
I am looking in the packages repositories of
On Fri, Aug 27, 2010 at 09:29:22AM +0200, Wenceslao wrote:
Package: firmware-ralink
Version: 0.26
Severity: important
I recently bought a Wifi stick (SMCWUSBS-N3) which uses the chip Ralink
RT3070,
because they say it works in Linux. I tried to install the driver (through
firmware-ralink
I installed in fact both (without putting them in automatic loading
after boot). With both drivers happen the same. I may be wrong, but I
tried very much to do in such a way they do not interfere. In the case
of Debian compliant was the non-free section of Squeeze (testing),
version 0.26.
On Fri, 2010-08-27 at 17:28 +0200, Wenceslao González-Viñas wrote:
I installed in fact both (without putting them in automatic loading
after boot). With both drivers happen the same. I may be wrong, but I
tried very much to do in such a way they do not interfere. In the case
of Debian
On Fri, 2010-08-27 at 10:15 +0200, Uwe Kleine-König wrote:
This might be related to
http://thread.gmane.org/gmane.linux.debian.devel.kernel/54624/
? Any news there?
Kel Modderman seems to have disappeared, haven't heard from him in a
long time.
If anyone else wants to join pkg-wpa
On Sat, 2010-08-28 at 10:35 +0800, Paul Wise wrote:
On Fri, 2010-08-27 at 10:15 +0200, Uwe Kleine-König wrote:
This might be related to
http://thread.gmane.org/gmane.linux.debian.devel.kernel/54624/
? Any news there?
Kel Modderman seems to have disappeared, haven't heard
14 matches
Mail list logo
