m_signal.cpp:95: error: 'struct sigcontext' has no member named 'pt_regs'
make[1]: *** [zm_signal.o] Error 1
make[1]: Leaving directory `/var/www/ZoneMinder-1.22.2/src'
make: *** [install-recursive] Error 1
I hope this can help...
thanks
Kasper
On 6/8/06, Gabriel Pa
c'
Kasper
On 6/7/06, Gabriel Paubert <[EMAIL PROTECTED]> wrote:
On Wed, Jun 07, 2006 at 12:13:20PM +0200, Kasper Jordaens wrote:
> Hi all,
>
> I'm trying to compile zoneminder on debianPPC. this should be quite
> easy but I get an error on context.cr2 & context.eip.
Hi all,
I'm trying to compile zoneminder on debianPPC. this should be quite
easy but I get an error on context.cr2 & context.eip.
zm_signal.cpp:89: error: 'struct sigcontext' has no member named 'cr2'
zm_signal.cpp:89: error: 'struct sigcontext' has no member named 'eip'
zm_signal.cpp:93: error
same here...
are you trying an airport extreme on a powerbook 12"???
Kasper
On 1/19/06, Milan Toth <[EMAIL PROTECTED]> wrote:
> well,
>
> still no luck. kernel 2.6.15 without IEEE80211, with
> softmac-snapshot, bcm43xx from checkouted from svn and still
> the same problem :(
>
>
I might be on the wrong track, but is journalling disabled? Because it
should be. Just had a similar problem with a OSX hfsplus hard disk
under linux...
Kasper
Hi,
This seems a very good solution for the current problem. One thing I
would add would be software suspend support. Alsa seems to have
trouble resuming if the state is different from when it was
suspended-to-disk, headphone detection seems to be wrong, volumes
mixed up etc.
I'm afraid I can't h
give this a try!
http://sourceforge.net/projects/ext2fsx/
I mount /home as a seperate drive in OSX, rw no problem
also works with ext3
using 10.3.9
Kasper
On 11/14/05, Marco Chiarandini <[EMAIL PROTECTED]> wrote:
> Dear list,
>
> I just finished installing the kernel 2.6.14 with HFS and HFSPLU
added the kernelparameter, didn't change a lot.
tnx anyway
Kasper
On 11/13/05, Kasper Jordaens <[EMAIL PROTECTED]> wrote:
> Well I have rivafb compiled as a module, but it wasn't loaded. instead
> nvidiafb was loaded. modprobed rivafb but it didn't help, mybe I ne
if you have azerty-BE like me
@ would be easy on top left under #
| would be: Meta-Shift-L (I know terrible)
\ would be: Meta-Shift-/
the brackets are [ Meta-Shift-(
and { Meta-(
and vice versa
hope this helps
Kasper
On 11/12/05, Fritz Wettstein <[EMAIL PROTECTED]> wrote:
> Eddy Petri
Hello list
I've recently upgraded to a 2.6.14 kernel, and then off course
recompiled the mol module for use with the new kernel. Problem is
molvconfig will only detect 8bit colour depth as working modes
resulting in quite an ugly/unworkable OSX. Has anyone experienced
this? Rebooting back into 2.
strange...
I tried (2.6.10) old kernel and brightness works, in 2.6.14 nothing
works. Perhaps it's because of my powerbook
processor : 0
cpu : 7447A, altivec supported
clock : 666MHz
revision: 0.1 (pvr 8003 0101)
bogomips: 663.55
machine : Power
I upgraded pbbuttonsd to 0.7.2, as well as my kernel to 2.6.14 and I'm
experiencing the same problem. I tried various things, but I have no
clue.
Gtkpbbuttons complains it cannot set something to a negative
percentage when I try to adjust screen brighntess (I should look up
the exact error, but I h
does this in anyway affect nvidia performance, as in OpenGL is up for testing?
(i have the GeForce Go5200)
Friendly
Kasper
On 9/12/05, Sven Luther <[EMAIL PROTECTED]> wrote:
> Hi,
>
> They are at :
>
> http://people.debian.org/~luther/xorg
>
> Please test them out and provide feedback :)
>
I believe the fact you see tux means you have loaded a kernel, but I
might be wrong.
regards
Kasper
On 8/22/05, Pablo Gil <[EMAIL PROTECTED]> wrote:
> Hi everyone!
>
> This is the first time I compile my kernel in my Powerbook G3 Pismo
> (I've already done it several times in other machines). I'
About the pciproxy patch:
good job!
but shouldn't this be main news on the list? I think I'm not the only
one trying to get rid of my cable. I'm sorry if I missed an earlier
thread or something but anyone who wants to give it a try:
http://lists.terrasoftsolutions.com/pipermail/mol-general/2005-J
I'll try to check that new option later this week and mail my findings
On 7/30/05, Bin Zhang <[EMAIL PROTECTED]> wrote:
> On 6/16/05, Kasper Jordaens <[EMAIL PROTECTED]> wrote:
> > I'd say everything is back to normal. Whatever you do, if you're on
> >
I had the same problem.. eventually I reformatted my home-partition to
ext3 wich works ok
check
http://sourceforge.net/projects/ext2fsx/
I just see that it is ext2 on the page but I believe I'm using ext3...
I'll check later today (in OSX now)
Kasper
I'd say everything is back to normal. Whatever you do, if you're on
ppc leave preemtion off (for now), as was stated before. Here are some
explanations:
http://forums.gentoo.org/viewtopic.php?t=228693
http://kerneltrap.org/node/3966
for those interested...
Kasper
On 6/15/
hello,
I just recompiled my kernel, and I added software suspend support. I'm
on an aluminium 12" G4 1.33 with nvidia card.
everything "just works" when I suspend using:
echo shutdown > /sys/power/disk; echo disk > /sys/power/state
network is up when resuming, usb is working great...
the problem
I finally managed to recompile my kernel. I'm running 2.6.12-rc6 now
without PREEMPT. Everything seems ok. I will do some compilation now
and report succes/error
Kasper
On 6/10/05, Bernhard Reiter <[EMAIL PROTECTED]> wrote:
> On Thu, Jun 09, 2005 at 02:11:11PM +0200, Bernhard Reiter wrote:
>
>
e.
>
> Uwe
>
> On Thu, Jun 09, 2005 at 11:09:07AM +0200, Kasper Jordaens wrote:
> > hello,
> >
> > the problem also occurs in console (right now I'm compiling in the
> > console, it's going ok for about 30 minutes) I do have pre-emptible
>
PROTECTED]> wrote:
> Kasper Jordaens wrote:
>
> >hello,
> >
> >
> >I've been recently compiling a lot on my Powerbook 12" 1.33Ghz.
> >Very often my compiles end up in errors like:
> >
> >
> >
> >
> It seems the 'well know bug&
hello,
I've been recently compiling a lot on my Powerbook 12" 1.33Ghz.
Very often my compiles end up in errors like:
"The bug is not reproducible, so it is likely a hardware or OS problem."
When I recompile the same code, same flags etc, sometimes it works. So
it is probably a hardware problem.
23 matches
Mail list logo