Our SMTP server on the master system stopped answering for a little while.
I sent a hangup to inetd and it started behaving again. Some list articles
were delayed, and some are sitting at our alternate MX host right now and
will eventually make it to the list.
Bruce
--
TO UNSUBSCRIBE
George:
But I do not think THIS promise card is supported. I have not seen any
DMA33 support in Linux yet.
The PCI driver recognizes the Promise Ultra DMA 33 controller in kernel
2.1.67 . It's not at all clear to me that the Promise driver does anything
with this information. It may be
Hamm includes both libbfd2.8.1_2.8.1-2.deb and
libbfd2.8.1.0.15_2.8.1.0.15-1.deb. Neither indicates and replaces or
conflicts. Are these two versions of the same package, or are they
independent?
Bob
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL
On Sat, Dec 13, 1997 at 05:35:29PM +1100, Hamish Moffatt wrote:
I have twice tried upgrading to ppp 2.3, but the provided
options file contains the dns-addr lines but pppd complains
about unrecognise options. How do I fix this? Other
people seem to be using it successfully. There are a number
On Sat, Dec 13, 1997 at 10:43:22AM -0500, [EMAIL PROTECTED] wrote:
It is my understanding that you cannot use dosemu to access partitions
which use the lilo boot system. This seems to indicate that the boot
partition, normally dev/hda1, cannot be DOS on a dual boot system if you
intend to use
George Bonser wrote:
On Sat, 13 Dec 1997, Oliver Elphick wrote:
I don't know what dtterm is, but from context it sounds like a terminfo
or termcap setting.
It is, I suppose, the destop terminal. In its default configuration, when
you right-click on a blank area of the destop,
butch wrote:
This is a multi-part message in MIME format.
--=_NextPart_000_0069_01BD07C7.EDA769A0
Content-Type: text/plain;
charset=iso-8859-1
Content-Transfer-Encoding: 7bit
hi,
does anyone out there on this list know what this is telling me?
allan
Pedro Sanchez [EMAIL PROTECTED] writes:
However, when user-name logs in and types groups he gets,
$ groups
user-name dialout
Where is dip? In fact, I tested by adding user-name to more groups but to
my surprise groups always returns the same two groups!
My first guess would be that
The card is an internal PnP card.
George Bonser wrote:
You have a cable modem that installed into your computer? Most cable
modems are external with an ethernet card installed in the computer.
On Sat, 13 Dec 1997, Aaron Walker wrote:
Has anyone successfully setup a PnP Cable-Modem in
what do i need to change to affect the settings of which ttys root is
allowed to log in from? ie, right now he seems to be able to log in from
ttys 1-8 and some ttyps but not elsewhere.
thanks.
aaron brick.
--
aaron brick. [EMAIL PROTECTED]
Date: Sat, 13 Dec 1997 12:57:21 -0800 (PST)
From: George Bonser [EMAIL PROTECTED]
To:Lightning Firestormer [EMAIL PROTECTED]
Cc:[EMAIL PROTECTED], debian-user@lists.debian.org
Subject: Re: A question regarding hardware
But I do not think
Has anyone found a way to make the latex statement \today in a lyx file
translate into December instead of Dezember? I live in the States
^ ^
where the former spelling is used.
Thanks,
Kingsley
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word
On Sat, Dec 13, 1997 at 10:43:22AM -0500, [EMAIL PROTECTED] wrote:
It is my understanding that you cannot use dosemu to access partitions
which use the lilo boot system.
I don't believe this.
bruce
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL
I contacted Galen on this one. I don't normally quote private mail on the
list but I am confident that he will approve and this will save him from
having to do it again.
From [EMAIL PROTECTED] Sun Dec 14 11:10:21 1997
Date: Thu, 04 Dec 1997 23:47:40 -0700
From: Galen Hazelwood [EMAIL
Hi,
i'm not sure if this is the right place to go for help, but i couldn't
find any other. I ordered a copy of tri-linux from Linux Systems Labs a
few weeks ago, and i didn't get a conformation message, and every time i
send them an email asking about my order, i don't get a reply. I was
just
what do i need to change to affect the settings of which ttys root is
allowed to log in from? ie, right now he seems to be able to log in from
ttys 1-8 and some ttyps but not elsewhere.
/etc/securetty gives a list of tty's that root can login from.
D.
--
TO UNSUBSCRIBE FROM THIS MAILING
On Wed, 10 Dec 1997, Marcelo E. Magallon wrote:
On Wed, 10 Dec 1997, Stephen Zander wrote:
I thought irq 5 was also for lpt1. surely it's better to document
what we have now? Otherwise we may trade one set of questions for
another (Why can't I use my ... printer? :))
In linux
I'm trying to compile the 2.0.32 kernel and I'm getting this at the end of
the make-kpkg clean and make-kpkg --revision=custom.1.0 kernel_image:
make: *** Warning: Clock skew detected. Your build may be incomplete.
What exactly does this error mean?
I'm running a completely hamm distribution
send an email to [EMAIL PROTECTED] they _will_ take care of your
problem... We did change over to a new system a few weeks
back and had a few problems with email sent to [EMAIL PROTECTED]
If you are not taken care of please email me [EMAIL PROTECTED] or call
me at 888 440 0123.
-Dan
Hi,
On Sun, Dec 14, 1997 at 01:08:00AM -0500, Christopher Jason Morrone wrote:
I'm trying to compile the 2.0.32 kernel and I'm getting this at the end of
the make-kpkg clean and make-kpkg --revision=custom.1.0 kernel_image:
make: *** Warning: Clock skew detected. Your build may be incomplete.
Say,
does anybody know why this happens every once in a while?
I'm running Netscape 3.01 on Debian 1.3.1 on a K5-100 system.
For months at a time it is perfectly stable and then, for no
reason that I am able to fathom, when I run netscape
it never shows up. A quick ps -ax shows a zombied
George Bonser wrote:
I take that back ... it does not work. Looks like I created a tercap type
entry out of a terminfo description. Any idea how I can turn that back to
a terminfo entery for linux or will the Solaris terminfo entry work ok?
What you posted looked like a good terminfo
The card is made by General Instruments. The TV cable does go into the back of
the
card. In my house, we have only 1 cable box, and that's in the living room. My
linux box is in my room. So there's no cable box within 25 feet of my
computer. I
read the cable-modem mini-HOWTO and it says
I recently switched from smail to exim as my MTA in the hopes of getting
something a bit easier to configure and which can more easily handle spam
blocking. However, I've run into some problems getting exim to process my
local, user-to-user mail.
I'm using the bogus domain name of
-BEGIN PGP SIGNED MESSAGE-
On Sat, 13 Dec 1997, Robert D. Hilliard wrote:
Hamm includes both libbfd2.8.1_2.8.1-2.deb and
libbfd2.8.1.0.15_2.8.1.0.15-1.deb. Neither indicates and replaces or
conflicts. Are these two versions of the same package, or are they
independent?
They
[EMAIL PROTECTED] wrote:
On Dec 12, A. M. Varon wrote
Hi,
I have heard of some problems with AMD K6 Anyone to comment?
The reason is because I have a K6 200 right beside me. :)
There are problems with certain runs of the K6 and linux with
more than 32 MB RAM. It's documented
Does anyone know if there are drivers under Linux for IDE CD writers,
and the CD rewritable drives? Or does all the work have to be done under
Win95?
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Does anyone know if it is possible to set up dselect to use a ftp proxy
when using a ftp source? My ISP doesn't provide any other way to ftp.
Thanx in advance
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
This one works for me, so assuming your ftp proxy uses the normal
[EMAIL PROTECTED] login, just set the ftp host to be the proxy
server, or proxy:port if required, and the username as
[EMAIL PROTECTED]
my settings are:
ftp site: green:2121
passive: y
username: [EMAIL PROTECTED]
password:
Lets say I have a Win95 box and a Linux box. Does Win95 view the samba
connection as TCP/IP or NetBEUI?
Thanks for your help.
--
`
Aaron Walker
Work:
Site: http://www.iconmedia.com
Email: [EMAIL PROTECTED]
Lets say I have a Win95 box and a Linux box. Does Win95 view the samba
connection as TCP/IP or NetBEUI?
It uses TCP/IP.
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Rob wrote:
This one works for me, so assuming your ftp proxy uses the normal
[EMAIL PROTECTED] login, just set the ftp host to be the proxy
server, or proxy:port if required, and the username as
[EMAIL PROTECTED]
Thanks for the suggestion - it appears that the proxy in this case uses
There are problems with certain runs of the K6 and linux with
more than 32 MB RAM. It's documented on their web page, along
with how to return your defective chip for a good one. Since
you have to send it to them first, I just switched the K6 we
had into a winders95 box, and it runs
The card is made by General Instruments. The TV cable does go into the back
of the
card. In my house, we have only 1 cable box, and that's in the living room.
My
linux box is in my room. So there's no cable box within 25 feet of my
computer. I
read the cable-modem mini-HOWTO
On Sat, Dec 13, 1997 at 03:33:02AM +0100, Remco Blaakmeer wrote:
Hi,
This is probably a silly question, but I thought I'd ask anyway:
How does one set up procmail as the default mail delivery program when
using smail as MTA?
I have set up procmail on a per-user basis (using a proper
I want to set up my computer to run Debian in 1 partion and have win95
in another. I have no idea how to go about this or if it can be done.
Thanks for any help.
Bob
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL
If it uses TCP/IP, how does Win95 see it in Network Neighborhood?
Fenrick wrote:
Lets say I have a Win95 box and a Linux box. Does Win95 view the samba
connection as TCP/IP or NetBEUI?
It uses TCP/IP.
--
`
Aaron
On Sun, Dec 14, 1997 at 03:06:02AM -, [EMAIL PROTECTED] wrote:
On Sat, Dec 13, 1997 at 10:43:22AM -0500, [EMAIL PROTECTED] wrote:
It is my understanding that you cannot use dosemu to access partitions
which use the lilo boot system.
I don't believe this.
I don't know why, but this is
On Sun, 14 Dec 1997, Bob Mills wrote:
I want to set up my computer to run Debian in 1 partion and have win95
in another. I have no idea how to go about this or if it can be done.
No problem ;-)
You will have to install '95 on the first primary partition. Don't let the
install make the
Actually, simply copying the terminfo entry from the solaris machine to the
debian machine worked.
On 14-Dec-97 Oliver Elphick wrote:
George Bonser wrote:
I take that back ... it does not work. Looks like I created a tercap type
entry out of a terminfo description. Any idea how I
On 14-Dec-97 Aaron Walker wrote:
The card is made by General Instruments. The TV cable does go into the back
of the
card.
YIKES! That is ALL we need, RF interference problems from computers on the
cable-TV circuit. The reason I was skeptical was that I was with a company
desinging the
Victor Torrico [EMAIL PROTECTED] writes:
On 97/12/11 at 08:25 AM -0500, Victor Torrico wrote:
Hello,
Think CHOS is the greatest thing since chocolate ice cream. I have
it partially configured but can't boot all OSs on several
partitions. Obviously it's a case of cockpit trouble on
On Sun, 14 Dec 1997, Rob wrote:
This one works for me, so assuming your ftp proxy uses the normal
[EMAIL PROTECTED] login, just set the ftp host to be the proxy
server, or proxy:port if required, and the username as
[EMAIL PROTECTED]
The simpler solution for this type of proxy is to just
[EMAIL PROTECTED] wrote:
Is it possible to boot 95 from a logical partition? On a seperate note, is
it possible to *install* (from CD) 95 onto a logical HD.
To my knowledge, no - but I've never actually tried it.
Gertjan.
--
Gertjan Klein [EMAIL PROTECTED]
The Boot Control home page:
On Fri, 12 Dec 1997, Daniel J. Mashao wrote:
I had my system working fine for about 2 months but lately I have been
experiencing problems. I initially thought it had to do with dirty
filesystems. Now I have excluded that possibility.
Now I wanted to test memory (128M) by removing 64M at a
Hi
Sorry, I can't provide a fix, but I would like to find out more about CHoose OS
0.80. Where can I get more info/download?
thanks
Philip Jensen
On 97/12/11 at 08:25 AM -0500, Victor Torrico wrote:
Hello,
Think CHOS is the greatest thing since chocolate ice cream.
--
TO UNSUBSCRIBE
Hi,
There are a lot of things about mail delivery that I'm unsure of right
now. Having put more time into thinking about exactly what I want, I've
become less certain about my configuration needs.
Originally I thought it best to masquerade globally, as this is not
email client specific, which
I think you're confusing the network client with the network protocol.
Win95 will quite happily see lanman servers running on TCP/IP, IPX/SPX or
NetBEUI, so it'll see samba just fine. If your machine is having a
problem with this, try adding TCP/IP to its network configuration, and
making sure
G'day everybody --
I decided to invest into new computer, and since I already have two
SCSI-2 HD's (Quantum and IBM), I'd like to keep them. My current system
is VLB-based so I have to buy a new card for PCI-based pentium class
system. I am looking into choosing between three diff adapters at
I tried today to recompile my kernel, but after a few minutes of working
fine, it quit, giving me these errors:
consolemap.c:303: uni_hash.tbl: No such file or directory
consolemap.c: In function `con_set_default_unimap':
consolemap.c:404: `dfont_unitable' undeclared (first use this function)
On Sun, 14 Dec 1997, Marcus Brinkmann wrote:
On Sat, Dec 13, 1997 at 03:33:02AM +0100, Remco Blaakmeer wrote:
Hi,
This is probably a silly question, but I thought I'd ask anyway:
How does one set up procmail as the default mail delivery program when
using smail as MTA?
I have
On Sun, 14 Dec 1997, Aaron Walker wrote:
If it uses TCP/IP, how does Win95 see it in Network Neighborhood?
Fenrick wrote:
Lets say I have a Win95 box and a Linux box. Does Win95 view the samba
connection as TCP/IP or NetBEUI?
It uses TCP/IP.
It's simple. NetBIOS runs on top of
The sound driver in the 2.1.72 kernel builds as a sound module, and
then separate modules for each individual device. On my system, I use
the sb driver, which then depends on the uart and sound
modules. This works fine with modprobe and appropriate options.
Is there any way to get this work
I have no idea whats going on, but I did find this:
/usr/src/kernel-source-2.0.30/drivers/char/uni_hash.tbl
On Sun, 14 Dec 1997, Aaron Brick wrote:
I tried today to recompile my kernel, but after a few minutes of working
fine, it quit, giving me these errors:
consolemap.c:303:
On Fri, 12 Dec 1997, Dale Scheetz wrote:
When I send mail through my ISP, I direct pine's smtp to the mail server
(by name, ie mail.polaris.net) my ISP askes me to use. I assume that
smail/sendmail on other machines on the local net would be pointed at
that server as well.
That's notquite
I've been getting these messages for a few days:
Date: Sun, 14 Dec 1997 06:42:01 -0800 (PST)
From: Cron Daemon [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Cron [EMAIL PROTECTED] run-parts /etc/cron.daily
chgrp: invalid group name `#-1'
chgrp: invalid group name `#-1'
chgrp: invalid group
Hi,
i was amazed at the help i got from you people at this list, i got a
message about 20 minutes after i asked a question. That was amazing,
thanks to all who helped. Anyways, things will hopefully soon be sorted
out, and i will soon be a new linux user.
I have very little knowledge of linux
57 matches
Mail list logo
