Tengo un problema que no acabo de entender pero que me temo que tiene una
facil solucion, pero yo me he quedado atascado y no se me ocurre nada mas.
El problema es el siguiente: tengo dos usuarios en mi linux, el root y uno
para trabajar. El problema es que si no arranco como root para hacer el
Hola :
Este es mi primer mensaje a la lista un saludo a todos
He isnrtalado devian y puesta a fincionar las x ayer, no esta mal
Priemr problema : no tengo puesrtos series /dev/cua... ninguno. ¿se llaman
de otra manera, hay que hacerlos . He estado hasta las cuatro AM con esto y
el lilo. El lilo lo
Hola:
Siguen los problemas con el paso de libc5 a libc6. Tengo las siguientes
librerias instaladas:
locales_2.0.7pre1-4.deb - Xlib6_3.3-6.deb - Xlib6-altdev - Xlib6g_3.3-6.deb -
Xlib6g-dev
Y cuando inento ejecutar algun cliente de X, como por ejemplo xedit me suelta
el siguiente error y no me
On Thu, 30 Apr 1998, David Manuel Cabal Ines wrote:
...
y tuve que reinstalar. Asi que agradeceria cualquier tipo de ayuda,
tambien agradeceria mucho si me indican alguna forma de hacer que el
usuario pueda hacer el mount ya que el man del super no hay quien lo
entienda...
Esto se puede
gracias anticipadas!
sigo con problemas con mi conexiónuso Infovia, dos discos duros, Pentium 233, 32
Mb, uss robotics 33,600 y placa red 3 com.
En un disco duro la partición FAT32 para W95
en el otro
las dos particiones para Linux y una para intercambiar ficheros con dos
* en
David Manuel Cabal Ines wrote:
...El problema es que si no arranco como root para hacer el
mount no puedo trabajar. El principal problema es que en mi usuario
ejecuta muy bien los shellscripts, pero en el root no los ejecuta si no le
pongo bash delante...tambien agradeceria mucho si me
Pablo Sendin Ranha - [EMAIL PROTECTED]
Monte Perdido Cuvi - etset - Universidade de Vigo
Asako Arroto, e as suas cinzas.
Aun a pesar de cometer una soberana estupidez, creo que los puertos serie
COM1 y COM2 son /dev/ttyS0 y /dev/ttyS1. Por
gracias anticipadas!
sigo con problemas con mi conexiónuso Infovia, dos discos duros, Pentium 233,
32
Mb, uss robotics 33,600 y placa red 3 com.
En un disco duro la partición FAT32 para W95
en el otro
las dos particiones para Linux y una para intercambiar ficheros con dos
* en
Queriendo mejorar los gráficos, le hice caso a los de la tienda y
compré una ATI-3D Charger (el procesador creo que es un Rage II +
DVD, si no recuerdo mal). Pero no consigo configurar el XF86Config
por más que lo intento de mil formas, con el XF86Setup, con el
xf86config, retocando directamente
Antonio Vieiro Varela wrote:
Queriendo mejorar los gráficos, le hice caso a los de la tienda y compré
una ATI-3D Charger (el procesador creo que es un Rage II + DVD, si no
recuerdo mal). Pero no consigo configurar el XF86Config por más que lo
intento de mil formas, con el XF86Setup, con el
On Thu, 30 Apr 1998, Jaime E. Villate wrote:
Antonio Vieiro Varela wrote:
Queriendo mejorar los gráficos, le hice caso a los de la tienda y compré
una ATI-3D Charger (el procesador creo que es un Rage II + DVD, si no
recuerdo mal). Pero no consigo configurar el XF86Config por más que lo
Luis Francisco Gonzalez wrote:
Juan Carlos Muro decía:
Hola.
Queria hacer una pregunta que me llevo haciendo desde hace ya tiempo.
Estos dias me ha dado por hacer arrancar las X windows con xdm. La duda
es : ¿En que archivo le digo que gestor de ventanas tiene que arrancar y
Hola:
He convertido el Netscape comunicator en rpm a formato dev lo he instalado y
al parecer sin problemas, todo parece estar donde deve. Pero al ejecutarlo
me dice que no está instalado incluso en el propio directorio /usr/bin
Alguien sabe donde la meto, gracias
un saludo y gracias por al
At 19:22 29/04/98 +0200, Antonio Vieiro Varela wrote:
El servidor X11 de Linux, el que viene en todas las distribuciones,
se llama XFree. Claro, hay tantas tarjetas que, en vez de hacer
un único programa muy grande hay muchos programas más pequeños.
Algunos de estos programas funcionan
R.Ll.V escribió:[...]
Priemr problema : no tengo puesrtos series /dev/cua... ninguno. ?se llaman
de otra manera, hay que hacerlos . He estado hasta las cuatro AM con esto y
el lilo. El lilo lo he instalado pero sin puertos serie ni modem ni
[...]
Hola.
Yo tuve el mismo problema hace un
On Thu, Apr 30, 1998 at 10:39:39AM +0200, M. Pascual wrote:
Siguen los problemas con el paso de libc5 a libc6. Tengo las siguientes
librerias instaladas:
locales_2.0.7pre1-4.deb - Xlib6_3.3-6.deb - Xlib6-altdev - Xlib6g_3.3-6.deb -
Xlib6g-dev
para Netscape (debe ser el mismo problema
Si estamos archivados, no lo había visto porque estamos al
final... en Others :-) Los archivos comienzan en abril de este
año, pero peor es nada.
Nuestro URL:
http://www.debian.org/Lists-Archives/debian-user-spanish-9804/
Hi. Here's something that works with Linux, but is not
nearly as easy to use or with as many features as frontpage.
It does the job, though.
http://www.w3.org/Amaya
--
tony mollica
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
You may want to try Netscape Composer. It comes with
Netscape Communicator.
We use it here at WWU for a ton of stuff. Unfortunatly we
use the Win95 version.
I think the Linux version works pretty well, although I haven't
played with it for a while. Vi is my HTML composer of choice.
--
I have /dev/ttyS0 shown as belonging to group dialout and have added my
username to the dialout group, but I get
cannot open /dev/ttyS0: Permission denied
errors with both minicom and efax. I'd rather not run these as root.
Did I miss something?
Bob
Bob Nielsen
I have a local network that consists of 2 win95 and 1 debian box.
The debian box has an isdn connection to the Internet.
There is one Problem:
The win95 boxes make the debian box dial exactly dial every 5 minutes,
each. This is getting very expensive.
Is there a possibility to get win95 to NOT
Did you check 'ls -l /dev/ttyS0' to make sure the group ownership on the file is
not 'dip' rather than 'dialout' (although I think it should be dialout on my
system, debian 1.3.1, it was set up as group dip).
Bob Nielsen wrote:
I have /dev/ttyS0 shown as belonging to group dialout and have
Also, if you changed /etc/group which you were logged in you need to log in
afresh in order for the group addition to take affect.
Bob Nielsen wrote:
I have /dev/ttyS0 shown as belonging to group dialout and have added my
username to the dialout group, but I get
cannot open /dev/ttyS0:
/dev/ttyS0 should have 660 permissions. I frequently find my
/dev/ttyS1 has changed to 640. This can be caused by pppd terminating
abnormally, and perhaps by other events.
Bob
--
_
|_) _ |_ Robert D. Hilliard[EMAIL PROTECTED]
|_) (_) |_) Palm City, FL USAPGP
When I use nslookup to resolve my DNS name, it gives a 'Non-authoritative
answer'.. How can I fix this? Below is the relevant named configuration
(I'm using the lasted BIND from Debian/hamm+unstable):
--begin---
; name resolution for 3dillusion.com
Hi.
I am trying to implement quotas on the mail system of my debian linux
server. I have configured the quota system so that users have a quota on
/var/spool.
This quota works fine and enforces the limit correctly when a user
attempts to put any files in that filesystem via the shell - but
Editing the file is cheating so you've shown nothing. I can delete the back
half of a
jpeg and 'file' will still say the file is a jpeg. Besides which fact 'file'
and
magicfilter do not share the same magic info which identifies files.
Nononono. The _front_ end of the file (which I've
On Wed, Apr 29, 1998 at 08:40:35PM -0400, Bob Hilliard wrote:
/dev/ttyS0 should have 660 permissions. I frequently find my
/dev/ttyS1 has changed to 640. This can be caused by pppd terminating
abnormally, and perhaps by other events.
I knew it, I knew it, I knew it! heh
Sounds like a
-BEGIN PGP SIGNED MESSAGE-
I got my SCSI tape drive and I installed a SCSI card I had lying around
unfortunatly it didn't work :(
I THINK the problem may be the controller...
I get the messages:
aha152x: processing commandline: ok
aha152x: BIOS test: passed, detected 1 controller(s)
I'm trying to compile iBCS for kernel 2.0.30. I've gotten the
source code tar file: ibcs_970212.orig.tar from the August 1997
Info Magic disks. The code compiles easily enough and installs.
Using insmod iBCS does not produce a kernel mis-match, but the
loading fails with:
/lib/modules/misc/iBCS:
On Thu, 30 Apr 1998, Rev. Joseph Carter wrote:
On Wed, Apr 29, 1998 at 08:40:35PM -0400, Bob Hilliard wrote:
/dev/ttyS0 should have 660 permissions. I frequently find my
/dev/ttyS1 has changed to 640. This can be caused by pppd terminating
abnormally, and perhaps by other events.
Is there any sort of display postscript support in Linux?
David
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Forwarded from: HENRY L. BUNCH,FIC([EMAIL PROTECTED])
Toddler Property Laws
1. If I like it, it's mine.
2. If it's in my hand, it's mine.
3. If I can take it from you, it's mine.
4. If I had it a little while ago, it's mine.
5. If it's mine, it must never appear to be yours in any
On Thu, 30 Apr 1998, Chris wrote:
This quota works fine and enforces the limit correctly when a user
attempts to put any files in that filesystem via the shell - but when a
user recieves mail it is placed into their mail file - regardless of their
disk quota. So affectively the mail system
I figured it out with a little playing around.. I guess BIND has gotten a
little more strict with its format because I never had this problem
before. Oh well, it's fixed now.
-Paul
On Wed, 29 Apr 1998, Paul Miller wrote:
When I use nslookup to resolve my DNS name, it gives a
On Wed, 29 Apr 1998, Pete's mailing list account wrote:
On Thu, 30 Apr 1998, Chris wrote:
This quota works fine and enforces the limit correctly when a user
attempts to put any files in that filesystem via the shell - but when a
user recieves mail it is placed into their mail file -
/usr/doc/HOWTO/mini/Partition.gz could be helpful (attached to your email).
-- [ From: Herb Howe * EMC.Ver #2.5.3 ] --
Just received Debian Linux on the LSL CD which will be used on a shared
Pentium which already has Windows 95 installed. The installation
instructions look straight forward
Hi David B Wilson; unless Mutt is confused, you wrote:
Is there any sort of display postscript support in Linux?
David
Maybe ghostview_*.deb or gv_*.deb?
Regards
DamirN
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Rev. Joseph Carter [EMAIL PROTECTED] wrote:
/dev/ttyS0 should have 660 permissions. I frequently find my
/dev/ttyS1 has changed to 640. This can be caused by pppd terminating
abnormally, and perhaps by other events.
I knew it, I knew it, I knew it! heh
Sounds like a bug to
Hi,
Noah == Noah L Meyerhans [EMAIL PROTECTED] writes:
Noah -BEGIN PGP SIGNED MESSAGE- On Wed, 29 Apr 1998
Noah [EMAIL PROTECTED] wrote:
[EMAIL PROTECTED] ~$/usr/local/netscape/netscape
/usr/local/netscape/netscape: can't load library 'libXt.so.6'
Noah Try
I dunno what to tell you about the Win95 boxes and dialing every 5 mins :(
I used to do it this way:
I had a linux server with no monitor (oh sure its a minor detail...
until you need to reboot it and find out hours later there was
a bootable CD in the CD drive (but I digress))
I would telnet to
You could try running tcpdump to see which packets are causing the
dialing. If you can make all the machines idle, there shouldn't be too
much traffic. I would guess the packets are from netbios ports on the
windows machine to the DNS port on you DNS server. I had to block ports
137-139 for
Hi,
Alex == [EMAIL PROTECTED] writes:
Any ideas?
Thanks in advance.
Alex Install xlib6 (not xlib6g) and libc5 packages.
I think list is too long. libc5, xlib6, xpm4.7 and now:
[EMAIL PROTECTED] ~$/usr/local/netscape/netscape
/usr/local/netscape/netscape: can't load
I'm trying to compile the module for joystick support, but when I
make joystick.o and try to load it with insmod I get this error:
mstie# insmod joystick.o
joystick.o: kernel-module version mismatch
joystick.o was compiled for kernel version 2.0.32
while this kernel is
I get the same thing...
I don't think this needs to be fixed
I believe this is correct...
in any case I have never seen it be wrong even whan it says that...
have you seen any wrong entries with it?
might be a good idea to seek out what non-authoritative means
before trying to fix it ;)
-Steve
-BEGIN PGP SIGNED MESSAGE-
As per that big pine discussion I decided to try mutt...
I used it for about 5 mins...and think I would like to continue using it.
I believe I have the version from non-us (a coupla weeks ago I burned
a CD at work with the entire non-us portion of debian on
Sorry to repost, but got no answer, so maybe this message got lost ..
Hi all,
I'm trying to switch from sendmail to exim, and I'm facing some problems.
I have a small net and a dialup connection to internet. Since only some accounts
on one machine are enabled to internet mail usage, I'd like to
On Wed, Apr 29, 1998 at 11:14:06PM -0400, Bob Hilliard wrote:
/dev/ttyS0 should have 660 permissions. I frequently find my
/dev/ttyS1 has changed to 640. This can be caused by pppd terminating
abnormally, and perhaps by other events.
I knew it, I knew it, I knew it! heh
i installed kde tonight,also started it but it gave me these error
messages:
kwm: cannot connect to X server
~$ kcmbell: cannot connect to X server
kpanel: cannot connect to X server
kbgndwm: cannot connect to X server
krootwm: cannot connect to X server
kcminput: cannot connect to X server
On Thu, Apr 30, 1998 at 12:57:02AM -0400, Stephen Carpenter wrote:
-BEGIN PGP SIGNED MESSAGE-
As per that big pine discussion I decided to try mutt...
I used it for about 5 mins...and think I would like to continue using it.
I believe I have the version from non-us (a coupla weeks
I have a local network that consists of 2 win95 and 1 debian box.
The debian box has an isdn connection to the Internet.
There is one Problem:
The win95 boxes make the debian box dial exactly dial every 5 minutes,
each. This is getting very expensive.
I have experienced this problem to.
It was
I mistakenly sent the following to one person when I meant to send it to the
list. To Oliver, sorry that you have to read this twice.
Message Follows:
I did that and I it still won't boot from the hard drive. I think these
type of problems is what made me give up Linux last year when I
-BEGIN PGP SIGNED MESSAGE-
Hello Dale!
On Wed, 29 Apr 1998, G.Dale Miller wrote:
I am having trouble with the boot disks from April. I boot up with the
rescue floppy
and it start up with the loading root... etc.. Eventually it says
boot failed press and
key to try again. Are
Do you have this in /etc/host.conf?
order hosts,bind
this should tell DNS to look in /etc/hosts before looking into named
(or at least this is what I think it should do :)
Yep that is what is in my /etc/host.conf file. and it still don't work, it
look
to me like exim and
On Wed, 29 Apr 1998, Bob Hilliard wrote:
/dev/ttyS0 should have 660 permissions. I frequently find my
/dev/ttyS1 has changed to 640. This can be caused by pppd terminating
abnormally, and perhaps by other events.
Is there some place in the documentation where one can see what the
-BEGIN PGP SIGNED MESSAGE-
Hi
The bosses arround here have bought one of these. Our problem now is that when
printing the printer holds the last page (FF missing). Question: What is the
right filter for this one, and how can we force the FF?
Thanks
Mario Filipe
[EMAIL
On Wed, Apr 29, 1998 at 11:32:27AM -0400, Scott Ellis wrote:
[snip]
Somewhere in usr/src/linux/arch/i386/boot/compressed there is a file
that is invoking objdump (whatever that might be) with an option `-k'.
make zdisk and make zImage say this is an illegal option.
[snip]
The
On Wed, Apr 29, 1998 at 09:57:27PM -0400, David B Wilson wrote:
Is there any sort of display postscript support in Linux?
Yes. The ghostscript author was contracted to produce Display PostScript
support for gnustep (see http://www.gnustep.org/GoodNews/GeneralNews.html);
the dgs package in hamm
In message [EMAIL PROTECTED]
Berlin.MPG.DE, Heiko R. Selber [EMAIL PROTECTED] writes
Rev. Joseph Carter [EMAIL PROTECTED] wrote:
-+ On Wed, Apr 22, 1998 at 04:22:08PM +0200, Heiko R. Selber wrote:
-+
-+ I heard that the new KDE Beta-4 was released. Unfortunately, it seems
-+ that
-+ the .deb
I am not on the mgetty mailing list, please reply directly to me
I just noticed that mgetty is logging caller information to
/var/log/syslog.. Is there any way I can get mgetty to start logging to
something like /var/log/callers?
That would make it easier to have a program watch that file and
Hello,
Does anybody know where could I find a driver for a graphic card
Diamond Fire GL 100 Pro? I can't use X on my machine because the card is
not supported.
Many thanks,
Mircea
==
Mircea-David Morar ([EMAIL PROTECTED])
Research
On Wed, 29 Apr 1998, calvin wrote:
when i type in pon it dials my ISP and logs in fine then like 30 seconds
later it disconnects heres what it says when i type in plog
pppd[129] Serial connection established
pppd[129] Using interface ppp0
pppd[129] LPC: Timeout sending config-requests
How can I bounce mail with procmail? I've tried using |exit 111, but it
complains about not being able to open the exit mail file... Here is my
current .procmailrc:
LOGFILE=$HOME/mail.log
:0
* ! ^(FROM|TO).*tcimet.net
|exit 111
:0
* ^(FROM|TO).*tcimet.net
[EMAIL PROTECTED]
This it not on my
Is there a program, similar to xset, that can set the green monitor
functions for the console? I'd like my monitor to turn off after a
certain amount of inactivity.
Thanks
-Paul
---
Paul Miller [EMAIL PROTECTED]
Public PGP key at http://paul.3dillusion.com/pgpkey.txt
--
To UNSUBSCRIBE, email
In message [EMAIL PROTECTED], Michael
Tempsch [EMAIL PROTECTED] writes
On 29 Apr , John Wingfield wrote:
Could someone please explain to me what bo and hamm actually are?
Thanks!
Codewords for different versions of the distribution,
bo == 1.3(.1rX) (currently the stable distribution)
hamm ==
I have recently read a magazine about linux, and it mentioned the world's
first knowing of linux; A 1991 post to comp.os.minix from Linus
Torvalds. Would anyone have any idea if this is available, or even if it
was saved? Or even where I could start to look for it?
Sheesh.. I ask TOO much.. :)
Hi,
Download The Xserver/driver in the latest XF86_SVGA
server, i.e. in XF86 3.3.2. I'm not sure if that is available as a bo set
of packages. If it isn't just download the Linux_ix86 XF86-3.3.2 binaries
(not the glibc ones) from any XF86 mirror. The glibc XF86 binaries are
for Linux
Hello all,i got it working finaly,it's awesome,i like it very much and i
look stable on my setup (16 MB ram,48 MB swap).
thanks !!
Alain
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
In debian-user you wrote:
How can I bounce mail with procmail? I've tried using |exit 111, but it
complains about not being able to open the exit mail file...
You need to put 'EXITCODE=xxx' instead.
Here is my current .procmailrc:
Here is mine :-) I use qmail, so YMMV. reject-spam prints a
On Thu, Apr 30, 1998 at 11:29:43PM +1200, Michael Beattie wrote:
I have recently read a magazine about linux, and it mentioned the world's
first knowing of linux; A 1991 post to comp.os.minix from Linus
Torvalds.
A number of early Linux posts from Linus are available as part of the Linus
vs
Will Lowe wrote:
This DOES work:
1) make some windows thing (ie. MS Word) print to a file
2) ftp the file to the linux host in BINARY mode
3) killoff lpd
4) become user lp
5) do cat filename /dev/lp1
it prints just fine this way (even with all the crazy control characters
at the
Thanks to everyone who gave opinions and advice on the HTML editor. I can't
stand 'vi' (the DOS to Linux HOWTO is right when it says that DOS users
probably won't like vi! Is there a good tutorial? the man page assumes you
know it well), so when I get everything working again (see below) I think I
Hi,
did set the SMP support in the CONFIG file correctly?
Cheers, Thomas
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
In debian-user Michael Beattie wrote:
I have recently read a magazine about linux, and it mentioned the world's
first knowing of linux; A 1991 post to comp.os.minix from Linus
Torvalds.
MODE=Approximate quote from memory
Do you yearn for the days when men were men, and wrote their own
device
Dear all,
I'm confused...
Have RTFMing and am using 'shutdown -r now' to restart my system.
BUT our system (Netware/Unix) admin (really old and experienced
'wolf') have told me that he's using 'sync;sync;halt' and have tried
to persuade me to use 'his' command.
What is your opinion as I'm
Hi!
I recently updated an 386 with 8MB to hamm and after fixing utmp/wtmp I ran
last too check if everything is ok. It seemed to do nothing, neither ^C nor
^Z worked. I opened another ssh-connection and ps showed me
root 210 6.9 49.5 9952 3400 p0 D13:39 0:02 last
After a while
On Thu, Apr 30, 1998 at 11:08:29AM +0100, Mario Filipe wrote:
The bosses arround here have bought one of these. Our problem now is that when
printing the printer holds the last page (FF missing). Question: What is the
right filter for this one, and how can we force the FF?
I recommend
In debian.user was writ:
And - what are dangers of so-called 'three-finger salute' which is
described as The Very Bad Thing (tm) and absolute no-no?
It is? Hasn't been so for a *very* long time!
/etc/inittab:
# What to do when CTRL-ALT-DEL is pressed.
ca:12345:ctrlaltdel:/sbin/shutdown -t20
On Thu, Apr 30, 1998 at 06:57:35AM -0500, Brian Servis wrote:
The solution then is to set up a printer in printcap that does not use
magicfilter but instead just passes the raw data straight to the
printer.
Then use this printer as the share printer exported by samba. Windows
is
already
Lewis, James M. hat gesagt: // Lewis, James M. wrote:
Hi,
Anyone know if a diamond viper 330 card is supported
under XFree86? If it is, can I run it with a bo system?
I think this is a card with a Riva128-Chip. If so, take a look at
http://www.suse.de
Suse has developed a
IMHO quotas on /var/spool are a bad idea. They are only effective
(as you have discovered) if the user owns the file there - many processes
(news, mail, etc.) put things in spool with the ownership other than
the user who the file is for. If you do get say all the processes to put
the
file in
I have this in a file called `/etc/rc.boot/consoledpms':
#!/bin/sh
setterm -blank 15 -powersave powerdown
I couldn't get it to do anything other than 'suspend' on the console, and
'off' in X... probably depends on your videocard and monitor.
-thomas
On Thu, 30 Apr 1998, Paul Miller wrote:
Corey Miller wrote:
I'm trying to compile the module for joystick support, but when I
make joystick.o and try to load it with insmod I get this error:
mstie# insmod joystick.o
joystick.o: kernel-module version mismatch
joystick.o was compiled for kernel version 2.0.32
-BEGIN PGP SIGNED MESSAGE-
On 30-Apr-98 Hamish Moffatt wrote:
On Thu, Apr 30, 1998 at 11:08:29AM +0100, Mario Filipe wrote:
The bosses arround here have bought one of these. Our problem now is that
when
printing the printer holds the last page (FF missing). Question: What is the
Does you SCSI card have *gasp* jumpers to configure the interrupts
(or software)? I get similar messages if I put the wrong irq in
the AHA152x module load line. If it is one of those plug-n-pray
cards there used to be some utils that might help, iirc.
Pat Ouellette
Email: [EMAIL
On Thu, 30 Apr 1998, Chris wrote:
I don't think I'll hold my breath - but I will switch over to procmail to
my MDA. Can you give me any information on setting procmail up as the
MDA? Or is it fairly straight forward (ie. I should just read the
sendmail man page)
I would not recommend this
Patrick Ouellette wrote:
Does you SCSI card have *gasp* jumpers to configure the interrupts
Jumpers for both interrupts and IO adress...I had (previously to posting my
first message even) check /proc/interrupts
found that 11 and 9 are free interrupts for me...and the board suports both
(it also
On Thu, 30 Apr 1998, Brian Servis wrote:
Corey Miller wrote:
I'm trying to compile the module for joystick support, but when I
make joystick.o and try to load it with insmod I get this error:
[...]
Check the Makefile, I think there is a variable in there that sets what
Hallo,
ich suche die mesa2 libraries in einer libc5 Version für ein hamm System.
Hat jemand eine Idee?
Dirk
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hi,
Paul Miller wrote:
I am not on the mgetty mailing list, please reply directly to me
I just noticed that mgetty is logging caller information to
/var/log/syslog.. Is there any way I can get mgetty to start logging to
something like /var/log/callers?
No.
(Well, yes, direct the *mgetty*
Try setting the jumper to set the address to 340. I have an Adaptec 1522, which
is basicaly the same card but with floppy support. This is the message I get
from dmesg:
aha152x: BIOS test: passed, auto configuration: ok, detected 1 controller(s)
aha152x0: vital data: PORTBASE=0x340, IRQ=11,
Hello Everyone,
I have been using Debian 1.31 for some time now, but had a bad crash
last
Monday and was going to go ahead and upgrade to Debian 2.0 from the Frozen
Distribution. I know I am pre-mature but, thought this was a good time,
seeing how my system is hosed as it is. I do have
On Thu, 30 Apr 1998, Michael Beattie wrote:
I have recently read a magazine about linux, and it mentioned the world's
first knowing of linux; A 1991 post to comp.os.minix from Linus
Torvalds. Would anyone have any idea if this is available, or even if it
was saved? Or even where I could start
The Tecra files are for the Toshiba Tecra series of laptops. I'm not really
sure what is the difference between them and thee standard boot disks.
You don't need to do a clean install. I just downloaded the hamm base
packages and used dpkg to upgrade. Look at
The question I have is looking at the /binary-i386 Disk section, there
all
the files and 2 I am not sure about. This is resc1440tecra.bin and
drv1440tecra.bin. What exactly is the tecra? Do I need it for installing
Debian 2.0? I checked the list archives and couldn't find anything
On Thu, 30 Apr 1998, Pete's mailing list account wrote:
On Thu, 30 Apr 1998, Chris wrote:
If a user receives a mail which puts them over softquota, with as a
local delivery agent:
1) deliver. User would receive their mail and go over softquota but with
zero grace period. If
I've uploaded a preliminary package for mars-nwe (at long last)
to my FTP server at ftp.rising.com.au, in directory /pub/hamish.
This is 0.99pl8 which requires no patches to get running on libc6,
unlike previous editions. Thanks to Marcus for letting me know about
this, and for making me get
I have never found magicfilter to interfere with this though. I have
a PCL5 HP5L, and I print through samba to the same printer which I print
to on linux with lpr, with magic filter -- no problem. From memory
I did the same with my ESC2P bubblejet 20 before that.
The problem is that my win95
On Wed, Apr 01, 1998 at 04:03:46AM -0500, Will Lowe wrote:
about how to write a filter that does nothing, I'll do that ... I'd make
another printcap entry like this:
raw|winprint:\
:lp=/dev/NULL:\
:if=/usr/sbin/rawprint:
where /usr/sbin/rawprint just takes its input and cats
On Thu, 30 Apr 1998, Stephen Carpenter wrote:
[ snip ]
: I don't have the manual for the card but...
http://www.adaptec.com/support/overview/scsiha.html - you should be able
to figure out how to find the manual from there.
: if I look at the board itself i see jumpers (yes jumpers...I LOVE
1 - 100 of 128 matches
Mail list logo