La verdad es que no sé si esto en realidad funcione por que yo nunca tuve ese
problema... pero leí (no recuerdo en dónde) que poniendo en
/etc/X11/XF86Config
dentro de la sección Pointer:
Device /dev/gpmdata
E inicializar gpm con:
% gpm -t ms -R (obvio que eso puede ir en
Hola lista, tengo un problema con la instalación de PHP4 en potato. Descomento
el modulo de apache en httpd.conf y la lineas correspondientes a los tipos mime
en el mismo fichero, pero los ficheros .php y .phtml no son interpretados
cuando los miro con el notescapes. No se si hay que añadir
Hola.
Necesito cargar algunos módulos en el apache (ej: mod_include.so) y me
gustaría saber si es posible hacer esto sin necesidad de recompilar el
paquete.
--
José Pelegrín. [ [EMAIL PROTECTED] ]
http://naranjo.escet.urjc.es/~chinaski
Ya encontré el fallo (creo).
At 20:36 21/11/00 +0100, yo wrote:
Enas.
Uso el postfix en un server en producción.
Mal: lo que falla no es el postfix sino el in.qpopper
El caso es que me hace un comportamiento algo peculiar: de vez en cuando
pilla un buzón y lo multiplica por mil (zero + zero
Hola,
Ya se que esta pregunta es más de linux en general que de
debian, pero las news no me funcionan y es bastante urgente.
El caso es que tengo una HP Deskjet 970 con alimentador
duplex. El problema es que la impresión duplex se activa por
software. He intentado con el
--- jose [EMAIL PROTECTED] wrote:
Hola.
Necesito cargar algunos módulos en el apache (ej:
mod_include.so) y me
gustaría saber si es posible hacer esto sin
necesidad de recompilar el
paquete.
--
Que yo sepa, si los modulos estaban compilados para el
la version del servidor que tienes
Alexis Roda writes:
jose wrote:
Hola.
Necesito cargar algunos módulos en el apache (ej: mod_include.so) y me
gustaría saber si es posible hacer esto sin necesidad de recompilar el
paquete.
En principio solo tienes que modificar el /etc/apache/http.conf para
incluir un
Hola a todos:
Tenemos un impresora laser HP Laserjet 5M con una JetDirect y la
intención es poder enviarle las impresiones desde el spooler lprng de
linux. Hasta ahora (por razones históricas y de comodidad) he utilizado
un Server de HP (que tiene configurado el acceso remoto al JetDirect)
con
=?iso-8859-1?Q?first_last?= writes:
Que yo sepa, si los modulos estaban compilados para el
la version del servidor que tienes simplemente
annadelos.
Mira en httpd.conf y veras una lista de cosas que
se cargan. Mira en el directorio donde estan a ver si
esta el modulo que tu
Puedes configurarlos con telnet. Yo no tuve ningún problema.
Saludos.
¿Otras Soluciones?
Los jetdirect suelen soportar directamente TCP/IP
Si sabes la IP del jet direct intenta imprimir como en cualquier unix
remoto.
Incluso puedes hacer un telnet a esa ip y cambiar algunas cosillas de la
configuración.
Te paso un fragmento de un printcap en el que la impresora es
Guenas
El Tue, Nov 21, 2000 at 08:21:59PM +0100, Antonio Castro disidio iscribir:
swap se puede hacer en un fichero asi que si usas un fichero
montado en remoto puedes hacerlo.
Pues así de buenas a primeras esa solución no funciona (imagino que
habrá que buscar algún truco). Yo lo probé y no
At 23:01 21/11/00 +0100, you wrote:
Guenas
El Tue, Nov 21, 2000 at 08:21:59PM +0100, Antonio Castro disidio iscribir:
swap se puede hacer en un fichero asi que si usas un fichero
montado en remoto puedes hacerlo.
Pues así de buenas a primeras esa solución no funciona (imagino que
habrá que
Hola
Hace poco he hecho el paso de 2.2r0 a 2.2r1 y además he actualizado de
Woody (con sus dependencias):
-binutils
-util-linux
-modutils
-e2fsprogs
-pcmcia-cs
(prepárandome para el Kernel 2.4 :-) )
Bueno, de momento todo muy bien menos un detalle. El módulo de sonidoo.
Intenta ponerse
El Martes 21 Noviembre 2000 23:01, Andres Herrera escribió:
Guenas
El Tue, Nov 21, 2000 at 08:21:59PM +0100, Antonio Castro disidio iscribir:
swap se puede hacer en un fichero asi que si usas un fichero
montado en remoto puedes hacerlo.
Pues así de buenas a primeras esa solución no
Alguien me puede decir que es lo que ocurre con la pagina www.debian.org
que no consigo acceder a ella
me sale el siguiente mensaje:
Not Found
The requested URL /distrib/ftplist was not found on this server.
--
===
Sergio Valdivielso Gomez
At 03:09 p.m. 2000-11-22 +0100, Jaume Sabater wrote:
At 23:01 21/11/00 +0100, you wrote:
Guenas
El Tue, Nov 21, 2000 at 08:21:59PM +0100, Antonio Castro disidio iscribir:
swap se puede hacer en un fichero asi que si usas un fichero
montado en remoto puedes hacerlo.
Pues así de buenas a
Cesar == Cesar [EMAIL PROTECTED] writes:
Cesar Me gustaria que alguien me dijera donde conseguir
Cesar SoundSets para el wsoundserver o algun ejemplo.
ftp://shadowmere.student.utwente.nl/pub/WindowMaker/OpenSTEP.Sounds.tar.gz
Saludos.
--
J. Carlos
Hola a todos
En primer lugar, perdón si es muy off-topic (desde
luego no es específico de debian)
Pero en fin, ¿Alguien sabe si se puede crear una base de datos
en mysql que se almacene en un directorio distinto del que hay
por defecto (/var/lib/mysql en mi caso)? Es que la partición de
ese
El Wed, Nov 22, 2000 at 07:45:01PM +0100, Hue-Bond dijo:
Supongo que pondrás set printer_name recode tal..cual. No veo
nada de printer_name en mi .slrnrc ni en el ejemplo que viene en la
documentación... ¿quizá luego toca un |lpr?
Hola:
en el ejemplo de slrn (0.9.6.2,
Carles Pina i Estany wrote:
Hace poco he hecho el paso de 2.2r0 a 2.2r1 y además he actualizado de
Woody (con sus dependencias):
-binutils
-util-linux
-modutils
-e2fsprogs
-pcmcia-cs
Pues no sé cómo funcionará el modutils de woody, pero supongo que te
funcionará mi esquema en potato.
He probado lo de XF86Config.. y nada.. después lo de gpm.conf y tampoco pongo
el trocito de
gpm.conf y el trocito de XF86Config:
gpm.conf:
device=/dev/psaux
responsiveness=
#repeat_type=ms3
type=ps2
append=
XF86Config:
Section Pointer
Protocol PS/2
Device
On Sun, Nov 19, 2000 at 05:58:50PM +0100, Gerard wrote:
por defecto, pero aun asi no creo que produzca esa diferencia
sustancial de rendimiento (en suse solo tengo 2-3 servicios
mas lanzados).
Bueno, espero que me sepais respornder esta duda sin fanatismo
debianero ;)
Yo esto lo noté hace
Hola,
M Pero en fin, ¿Alguien sabe si se puede crear una base de datos
M en mysql que se almacene en un directorio distinto del que hay
M por defecto (/var/lib/mysql en mi caso)? Es que la partición d
'datadir' en /etc/mysql/my.cnf deberia funcionar
Salu2,
--
Roberto
**
Free
Wordtrans es principalmente un front-end gráfico de varios diccionarios
(aunque también existe una versión para consola). Hasta ahora soportaba
el diccionario del i2e y los diccionarios del Babylon Translator.
Pues bien, la versión 0.7 soporta también diccionarios dict. Hay un
montón de
Hola Jaume ;-)
On Tue, Nov 21, 2000 at 08:36:15PM +0100, Jaume Sabater wrote:
Enas.
Uso el postfix en un server en producción.
El caso es que me hace un comportamiento algo peculiar: de vez en cuando
pilla un buzón y lo multiplica por mil (zero + zero -): Donde antes habia 3
mensajes
On Wed, Nov 22, 2000 at 10:17:20AM +0100, Anders Holmberg wrote:
Hej!
Jag försökte mig på att installera sndconfig som jag tankade från debians
ftp.
Den ville inte vara med om den inte fick ha att göra med något som hette
libnewt0.
Vet någon vart man hittar detta libnewt0?
/Anders.
Kör du
På lämplig debian-mirror:
debian/dists/potato/main/binary-$arch/base/libnewt0_0.50-7.deb
där arch = i386, sparc, alpha ... eller vad som passar
Hälsningar,
/Karl
---
Karl HammarAspö Data [EMAIL
Hej
När jag kompilerar 2.4-kerneln och försöker starta den, så hänger den sig
direkt efter: Uncompressing Linux... Ok booting the kernel.. Med 2.2.17
funkar det det bra dock. Någon som vet vad jag gör för fel?
--
Henrik Andersson
Um dos meus principais problemas desde que mudei
para a debian 2.2 foi como configurar o modem. Após alguma pesquisa descobri que
este não funcionaria no kernel 2.2.17. Seguindo conselhos resolvi baixar e
compilar o kernel 2.2.14. O povblema já começou aí, pois no cd distribuido na
Aquivo
On Wed, 22 Nov 2000 22:39:45 -0200
Ricardo Santa Rita Oliveira [EMAIL PROTECTED] wrote:
[...]
Se alguem souber uma dica, agradeço.
Faltaria saber porque está caindo o pppd. Tente incluir no arquivo de
opções uma linha com
debug
e outra com
kdebug 1
Mantenha uma tela/janela
[...]
numeros e a conexão cai. Fiz tudo que estava dentro dos meus
conhecimentos: comentei a linha lock do /etc/ppp/options; alternei
entre os comando de chamamento do modulo no /etc/modules (alias
char-major-62 pctel | /sbin/modprobe pctel | /sbin/insmod pctel) nada
deu resultado. O pppd cai
Hi everybody!
I've been quite happily running Debian GNU/Linux woody since a while.
But yesterday I installed large amount of new debs (I didn't update for
time reasons since july or so) and now apt-get behaves strange and I
don't know why. It has worked with the same /etc/apt/apt.conf and the
Brandt,
On-topic: I too have always heard good things about IBM SCSI drives;
you might also want to consider getting multiple smaller SCSI drives
(maybe 4.5 Gb or so) used on eBay and it might turn out to be much
cheaper than the two larger 18 Gb (especially since HD are relatively
sturdy
Hi.
I have been look at the method of setting up color ls used by people and
I am convinced something is wrong with what is being recommended. What
seems to be the normal method is to put the following line in ones
.bashrc and .bash_profile:
eval 'dircolors -b [file]'
alias ls='ls
On Mon, Nov 06, 2000 at 02:17:34PM +0200, Johann Spies wrote:
I have apache installed and lynx, netscape and mozilla do not have a
problem to load http://localhost.
However, links and w3m fails. Links' error message is: Host not found
and w3m's: Can't load http://localhost;.
Does this
On Mon, Nov 20, 2000 at 11:53:52PM +0200, Johann Spies wrote:
I have a potato system on which I have installed woody's alien and rpm
some time ago which depended on woody's libc6. My system is working,
but I can get any potato source package to compile.
Is it possible to downgrade all my
Brian Schramm wrote:
I am running Potato with 2.2.17 for a kernel and KDE2 as my desktop.
I have a cs4232 audio card. When I was running Slink I had no trouble
running the audio card but when I upgraded, I have not been able to get it
to work at all. If I cat a audio file out to
I have been reading docs all day but I cannot figure this one out. Note
that I am used to Redhat/Mandrake, and I don't know as much as I would
like to about Debian.
I have a Netgear 10/100 card. I am sure it works, and I have used the
same type of card with other distros. In it's linux.txt it
Hello,
Does someone have a hint on how to set up W98 machines to work in my (small)
Linux (eth-based, 100Mbps) network. One Linux box is used as a
gateway, the others have their traffic routed using ipchains. Setting
up the ipchains rule and the gateway entry in the othe boxes Linux is
kmself@ix.netcom.com schrieb:
on Wed, Nov 22, 2000 at 12:03:47AM +0100, scr ([EMAIL PROTECTED]) wrote:
After creating a new partition, using the `w´ command
in fdisk I get following messages (I'm typing this
manually from a handwritten script ;-}
Calling ioctl () ...
Device busy
Hello,
I have installed KDE2 on my potato system from kde.tdyc.com
I want to have both, Gnome and KDE2. Gnome works as it should.
If I do 'startkede' I get:
xsetroot: unable to open display ''
So I set DISPLAY to ':0' and try again:
_X11TransSocketUNIXConnect: Can't connect: errno = 111
So my question is: how to make sure I'm building celeron optimised
packages?
I've not tested this (as I don't have any such files at hand), but I think
one way is to look at the result (in one of two ways):
file /usr/src/myprog/myprog
or
readelf /usr/src/myprog/myprog
This will give
I'm looking for a contact at Stormix, would appreciate a direct response
if you are a Storm GNU/Linux employee.
Thanks.
--
Karsten M. Self kmself@ix.netcom.com http://www.netcom.com/~kmself
Evangelist, Zelerate, Inc. http://www.zelerate.org
What part of Gestalt don't
Hello,
I want to say that I don' t understand why I can' t go away, i must install
debian to
unsubscribe!!!:-)
I have never saw a list from which i can't go away, it' s a trap
Can someone help me???
Thanks
Hello,
I want to make a CD/MO that contains all the packages that I have
installed on my system, but are not on my potato-debian-CD's. E.g. all
the updated packages. I would like to use this CD/MO as another source
for apt/dselect.
Is there a way to build such a disk, or at least a list of the
Hello,
I wanted a mutt with slang-support, so I took the mutt sources, made a
new package and installed it. I now have a problem: Every time I make
an update, the the system replaces my 'mutt_1.2.5-4_i386.deb' with
'mutt_1.2.5-4.deb' from the debian-server.
I made the package with:
Hi,
I share my home computer with my wife, and what I did was have gdm
(Gnome's xdm replacement) spawn 2 X sessions, one that can be found at
Ctrl-Alt-F7 (which I use) and the other at Ctrl-Alt-F8 (which my wife
uses). I've been using this forever (without gdm, in the past), and
it's a winner --
Hi there!
I have a problem with my soundcard. This card is based on Opti9xx chipset. So
the problem is, that sometimes it works properly (so I can play/hear music
well, it makes fine sounds of the built-in sounds of enlightenment, for
instance) but after a while it almost crashes, I mean sharp
Pierre Filippi wrote:
Hello,
I want to say that I don' t understand why I can' t go away, i must install
debian to
unsubscribe!!!:-)
no, you don't have to install debian...
I have never saw a list from which i can't go away, it' s a trap
Can someone help me???
read the last
Hi, I have installed the Samba package in a Debian 2.2 Potato and runs
well, but I wanna know how can I use PAM for the authentification method,
'cos currently it uses the /etc/samba/smbpasswd file, and I don't know
what parameter is needed to change the authentification to PAM.
The package is
On Wed, 22 Nov 2000, Leen Besselink wrote:
I've not tested this (as I don't have any such files at hand), but I think
one way is to look at the result (in one of two ways):
file /usr/src/myprog/myprog
Well, thanks to this suggestion, I'm now more or less sure pentium-builder
is not doing
Erik Steffl scripsit:
read the last line of your post. it says how to unsubscribe, just send
an email with subject unsubscribe to
[EMAIL PROTECTED]
Hmmm, problem is that not-Unix people may not be able to understand that:
mail -s unsubscribe [EMAIL PROTECTED] /dev/null
means:
send an email
Hi,
when i launch X, i get this message :
XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before
is there any problem? the stuff below looks like normal X run.
the X is probably on vt7
generally, when you wantto launch X you run startx (from command line)
or xdm (usually from inittab).
erik
Pascal THIVENT wrote:
Hi,
when i launch X, i get this message :
XFree86
M G Berberich [EMAIL PROTECTED] wrote:
I wanted a mutt with slang-support, so I took the mutt sources, made a
new package and installed it. I now have a problem: Every time I make
an update, the the system replaces my 'mutt_1.2.5-4_i386.deb' with
'mutt_1.2.5-4.deb' from the debian-server.
Yep,
Well, thanks to this suggestion, I'm now more or less sure pentium-builder
is not doing what it is supposed to do.
Now if I only could figure out why not...
I just build something with -m486 but I don't see it back in readelf -h or
file either. So this wasn't the right way to do it, sorry. :/
You won't have to recompile your kernel. Just go to your /usr/src/
direcory and read the instructions contained in the 3dfx-source tarball.
I did that some time ago and it was not really hard. Note: You must have
kernel-source installed (matching the kernel version you are running) in
the
I did an apt-get dist-upgrade today (was running 2.2r0 + helix since it
came out, all of my apt source lines point to stable so I imagine it must
be 2.2r1 + helix now. 41 packages where upgraded.) and it completely
destroyed my X setup. XF86Config was overwritten with a stock configuration
file,
Hello there
I'm a bit confused by key usage in X:
I have two computers, one as nfs-sever, and one as client. The following
happens when I am logged in as the same user on one or the other
computer (it is the home-directory that is exported, nothing else). On
the server, I can use Alt-Tab to cycle
But what about the end of the output ?
...
System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb -xkm
-m fr -em1 The XKEYBOARD keymap compiler (xkbcomp) reports: -emp -eml
Errors from xkbcomp are not fatal to the X server keymap/xfree86
/var/tmp/xfree86.xkm'
...
what does this
I've tried it both with and without the '+'. they both result in the
same error (403 forbidden). i check my permissions again and as far as
i can tell all parent directories are at least o+rx.
for some reason i can't understand apache is ignoring the Directory
directives i use in the conf file...
i tried this, but it hasn't worked. i did both
AddHandler cgi-script .cgi
and
AddHandler cgi-script .cgi .pl
i tried renaming all my perl scripts to .cgi, but it doesn't like it.
if i use the first one (with my scrips still having .pl), the browser
ends up downloading the script...
Hi!
Should I deinstall Gnome in order to install Helix Gnome in a Debian 2.2
machine?
Thanks in advance
Marcelo
_
Marcelo Chiapparini
[EMAIL PROTECTED]
Yobb [EMAIL PROTECTED] writes:
I have been look at the method of setting up color ls used by people and
I am convinced something is wrong with what is being recommended. What
seems to be the normal method is to put the following line in ones
.bashrc and .bash_profile:
eval 'dircolors -b
On Wed, Nov 22, 2000 at 01:55:07AM -0800, Luiz Otavio L. Zorzella wrote:
The problem I'm facing is about the screensaver. When I'm using my X
session, and my wife's screensaver kicks in, it hogs my CPU (not to
speak about the memory)... Is there any way to either nice the
screensaver (which
You don't need to.
On approximately Wed, Nov 22, 2000 at 10:35:22AM -0500, Marcelo Chiapparini
wrote:
Hi!
Should I deinstall Gnome in order to install Helix Gnome in a Debian 2.2
machine?
Thanks in advance
Marcelo
_
Marcelo Chiapparini
[EMAIL PROTECTED]
Hello
I got a couple of pdf files as a .cue and .bin file which are supposed to
be burn with the CDRWIN programm under windows. Does anybody know how I
can burn them under Linux? Or is this a proprietary format thats only
writable by cdrwin?
tschüss,
-christian-
--
Save
You need to have X started to run KDE. You can edit your
/etc/X11/xinit/xinitrc file, at the bottom it will have the stuff about
starting gnome probably, you can just comment out the gnome part and put 'exec
startkde'
On approximately Wed, Nov 22, 2000 at 09:28:36AM +0100, Robert Epprecht
On Wed, Nov 22, 2000 at 11:41:25AM +0100, Josep Llauradó Selvas wrote:
Hi, I have installed the Samba package in a Debian 2.2 Potato and runs
well, but I wanna know how can I use PAM for the authentification method,
'cos currently it uses the /etc/samba/smbpasswd file, and I don't know
what
.cue just tells the programme what to burn where. The .bin file is the
CD and you can write that using most CD writing software, read the .cue
file (it is a simple text file) to see if there are any odd settings.
Jeff
Christian Hammers wrote:
Hello
I got a couple of pdf files as a .cue and
mount -t vfat /dev/hda2 /mnt/windows/
mount: wrong fs type, bad option, bad superblock on /dev/hda2,
or too many mounted file systems
(aren't you trying to mount an extended partition,
instead of some logical partition inside?)
what i have is 2 hd one on an ata66 card and one is ide --
i am
To burn a .bin/.cue
go here http://users.andara.com/~doiron/bin2iso/ and get the one for linux
then just burn the iso
Hope this helps
Alan Todd
-Original Message-
From: Jeff Green [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 22, 2000 8:28 AM
To: Christian Hammers
Cc:
Edwin Hoff wrote:
I'm running debian potato on my computer. The problem is, that the
system doesn't initialize my ps/2-mouse automatically. To get access to
the mouse i always run gpmconfig manually as root, after this
procedure the mouse works. Which settings are necessary to have the
Hi All,
I'm an old-school fvwm fan but I recently decided to try gnome and kde
because I told my sister I'd help her install Linux and she'll
definitely want to use one or the other. Anyway, to make a long story
short, I'm using kdm right now and I'd like to be able to start gnome
from it as
Brandt Dusthimer wrote:
Well, like I said, there aren't any other GL stuffs ( other than the
NVidia stuffs that is) on my box. I was running Quake 3 fine and dandy (and
everything else too) with Woody and the NVidia stuffs before. Then, since
for some reason I had to remake the NVidia
Try cdrdao. It works.
On mié, 22 nov 2000, Christian Hammers wrote:
Hello
I got a couple of pdf files as a .cue and .bin file which are supposed to
be burn with the CDRWIN programm under windows. Does anybody know how I
can burn them under Linux? Or is this a proprietary format thats only
M G Berberich [EMAIL PROTECTED] writes:
I want to make a CD/MO that contains all the packages that I have
installed on my system, but are not on my potato-debian-CD's. E.g. all
the updated packages. I would like to use this CD/MO as another source
for apt/dselect.
Try apt-move or apt-zip:
$
On Wed, Nov 22, 2000 at 11:15:56AM +1100, Shao Zhang wrote:
|Matthew Sackman [EMAIL PROTECTED] wrote:
| Dear all.
|
| Firstly apologies for posting an empty email... agh! - wrong key strokes!
|
| Without wishing to spark off another bitching match about netscape 6 vs
| mozilla M18, I would
It looks like the vfat partition type is not supported by the kernel your
running. Are you using modules?? If so, try loading it before you try and
mount the partition.
modprobe vfat
also, are you sure its a vfat partition? second, are you sure that is the
correct partition number? fdisk -l
Hi,
Anyone knows if there is scaner support from Linux? Debian potato
specific?
TIA
I think it just means that if there were any errors, they
wouldn't be fatal. I actually had an xkbcomp error recently
(tried to use a non-existing key map), but lo and behold, it
wasn't fatal (just disabled my backspace key). So I think as
long as you don't get any actual error message, you can
i did a flat install -- using Storm Linux 2.0
mounting has never been a problem before now
hmm --
Thanks
Alan
-Original Message-
From: Jason Holland [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 22, 2000 9:14 AM
To: Alan Todd; Debian
Subject: RE: Ok heres my problem
It looks
Hi, everybody.
I am having a strange problem that I do not not how to solve. I usually
run X
as a normal user and I open one xterm as root (with su) to do the fancy stuff.
From the normal user, I do 'xhost localhost' and then run ethereal in the root
window. Up to here, everything
Well, I can't point you toward a player but I can perhaps offer a little more
insight. Actually, my knowledge pertains to SVCD so I'm guessing a little bit
but... In SVCD each video piece (for lack of a better term--and I'm leaving out
SPIs but let's just not worry about those right now) are
I have been using Mozilla M18 and I would agree with you that the ssl
and RSA functionality is not reliable yet. It drops myself from secure
websites. Sorry It drops the security which is worse. I would recommend
sticking with Netscape 4.75 if you like to do secure links, etc.. At
least until
On Tue, Nov 21, 2000 at 10:13:46AM -0500, Ken Januski wrote:
If the description for subscribing to list is changed from Subscribe to Get
Trapped in List maybe people will pay more attention to the instructions
for getting both in and out.:-)
Don't know if Get Trapped is the right expression.
I
On Wed, Nov 22, 2000 at 07:43:34AM -0800, Jeff Davis wrote:
I have a Netgear 10/100 card. I am sure it works, and I have used the
same type of card with other distros. In it's linux.txt it describes
an object file called tulip.o, which I assume to be the same as in the
Debian distro (I am
Actually I have no intentioin of unsubscribing since I feel as you do that
this is an incredibly helpful, useful and speedy list. Someone else referred
to being trapped in list, and since it might seem like being trapped to
someone who's getting 150+ messages a day that they don't want, I jokingly
Contrary to another responses, hardware isn't an issue. It's an issue of your
kernel. It used to be an issue with libc but as near as I can tell on my system
loff_t is a long long (64-bit integer) which is a necessary requirement. I
believe there are patches available and perhaps the lastest
I notice that you are using a Win-NT based mailer
[Mozilla 4.5 (French)] for sending this mail you
have sent.
Go into Mozilla and do/ type only the following:
a) To : [EMAIL PROTECTED]
b) Subject : unsubscribe
c) Turn off your signature file (if any)
d) Send the mail
Please DO NOT type
Ignacio Más Ivars [EMAIL PROTECTED] wrote:
How do I add permanently the root user in my machine so that everything
I run in the root window has rights to access the display?!?!
Don't use xhost - instead, either
'export XAUTHORITY=/home/youruser/.Xauthority' when you su to root, or
make
Subject: RE: Network config
Date: Tue, Nov 21, 2000 at 10:59:09AM +0800
In reply to:Gilbert.Li (??)
Quoting Gilbert.Li (??)([EMAIL PROTECTED]):
I can't find this option( CONFIG_RTL8139 ) in network device section.Where
is it?
Thanks
less /usr/src/linux/.config
On Wednesday 22 November 2000 07:35, Alan Todd wrote:
i did a flat install -- using Storm Linux 2.0
mounting has never been a problem before now
I'm running the same version as you and I noticed that the mount point
for my win98 partition wasn't created (it is entered into /etc/fstab
On 22-Nov-2000 M G Berberich wrote:
Hello,
I want to make a CD/MO that contains all the packages that I have
installed on my system, but are not on my potato-debian-CD's. E.g. all
the updated packages. I would like to use this CD/MO as another source
for apt/dselect.
Is there a way to
Hello,
parsed through the documentation of postgres, and found out that it is
possible to use perl as procedural language inside of postgres
tryed it out, and no such language
i looked through dselect lists and couldn't find that one
i installed all that seemed to have something
I've gone directly into the gnome control center and simply set the priority
level quite low. This is a slider, so no numbers are displayed. Found out
later that this changes the invocation line in ~/.gnome/Screensaver to a
good setting (18), where I don't see it interfering with anything else.
can anyone point me in the right direction how to use dselect
I am from a free bsd background and job changes here have made me start to
use debian.
I can not get the hand of it as its so different to /stand/sysinstall on
bsd.
any help gratefully accepted.
Ill give access to my test box if
On Wed, Nov 22, 2000 at 09:00:49PM +0518, USM Bish wrote:
...
Its not that difficult through Windows as well. Any
mailer could be used (even MS Outlook). All that is
needed is to send a BLANK mail with the subject line
reading : unsubscribe (without quotes ofcourse) to
[EMAIL PROTECTED]
On Tue, Nov 21, 2000 at 03:31:44PM -0600, Michael Janssen (CS/MATH stud.) wrote:
In robert_wilhelm_land's email, 21-11-2000:
Would someone kindly share his experiences in using a combo TV/radio
card on Deb 2.2.17?
Having a look on the internet I found the two cards at reasonable
1 - 100 of 248 matches
Mail list logo
