Install confusion

After reading about using the F3 key at the initial boot screen from the Woody CD#1, I decided to try it. At the boot: prompt I typed bf24 and sent the install on its way. Answered all the questions, made a boot floppy, and rebooted using said boot floppy. Result: the new boot floppy was iden

Re: Debian down at present?

On 15 Dec 2003, Debian User wrote: > I just tried the site and CAN get to it. > > At Monday, 15 December 2003, Anthony Campbell <[EMAIL PROTECTED]> > wrote: > > >I haven't been able to get to www.debian.org today or to ping it > either. > >Is it down at present? Not another compromise I hope... >

Re: Correct place for networking commands in Debian?

On 15 Dec 2003, Antony Gelberg wrote: > On Mon, Dec 15, 2003 at 05:01:35PM +, Anthony Campbell wrote: > > At present mine reads: > > > > > > # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8) > > > > # The loopback interface > > # automatically added when upgrading > > auto

Re: How to know correct hardware options for compiling 2.4.23 kernel

On Mon, Dec 15, 2003 at 10:29:13AM -0600, J N wrote: > Kenward: > > Did Dell have the information down to the chipsets that were used? > I have yet to find that information... perhaps it's as simple as "all > the chipsets that were used at Dell were made at Dell", but I haven't > seen that state

Re: email client

On Mon, Dec 15, 2003 at 01:17:40AM -0800, Gruessle wrote: > > I have some problems and what I have learned so far is that I need to send you guys > more info so you can help me. > > First think I should do I guess is setup an email client on the Debian box otherwise > I will have to type all th

Re: Proxy and Firewall Recommendations?

On Mon, Dec 15, 2003 at 01:09:08AM -0800, Scarletdown wrote: > I'm about to embark on my next project, getting a Debian system set up as > a proxy and firewall. This is going to be the system that my roommate > will be connecting to as his gateway to the Internet. > > He is running Windows-98SE

Could someone boot the spamming asshat? (nt)

(Yes, killfiles and all, but still...) -- Don Werve <[EMAIL PROTECTED]> (Unix System Administrator) Yorn desh born, der ritt de gitt der gue, Orn desh, dee born desh, de umn bork! bork! bork! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMA

IGNORE: test

test -- Public key available here: key FP 0A65 5E83 F44F 47A5 3DFC 19C5 7779 E411 FD82 303B -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROT

make-kpkg kernel-image .. missing modules

Hi I've been trying to recompile my kernel however the list of modules coming out is incomplete..   What i've been doing..   First off I got kernel-source.2.4.20 ..then i did make menuconfig  and decided on the stuff i want in the kernel.. next i did make-kpkg kernel-image which after a whi

Re: lilo.conf

On Monday December 15 at 03:09pm Gavin Seddon <[EMAIL PROTECTED]> wrote: > Hi, > I use lilo as my boot-loader and I need to add an "append" statement > to it in order for my ide cdrw to work. Additionally, there is a SCSI > tape drive on the system. Will someone pls tell me the correct line > re

Re: Jabberd segfault

On Monday December 15 at 11:14am Matthew Daubenspeck <[EMAIL PROTECTED]> wrote: > $ /usr/sbin/jabberd > 20031215T16:18:46: [notice] (-internal): initializing server > Segmentation fault > > There is nothing in the log other then the above line minus the > Segmentation fault... Try installing 'st

Re: Debian installation issue

Sreelal Chandrasenan wrote: One of the Pentium 4 box, when I instaled the Debian linux, I got nano_1.0.6_2_i386.deb corrupt error and I am unable to proceed further with installation. I tried multiple times and I could not succeed. I could install debian on other Pentium3 systems using the same CD

Dictionaries in OpenOffice.org

Hello, How do I activate spelling dictionaries in OOo? Is there a special package to be "apt-get install-ed", or should I do it manually? I am seeking to activate english & french dictionaries. Thanks, -- Dominique Deleris http://potatoworld.tuxfamily.org -- To UNSUBSCRIBE, email to [EMAIL P

Re: XFree86 with i810 onboard graphics (Newbie)

Allan Cairns wrote: Hi, Sorry if this is repeating a topic you've seen a dozen times before but I'm having real trouble starting X on my old celery 400 with the Intel i810 onboard graphics chip. I installed Debian Woody fresh and selected the i810 chip from the list. I also went conservative w

Re: Debian down at present?

On 15 Dec 2003, Colin Watson wrote: > On Mon, Dec 15, 2003 at 03:23:38PM +, Anthony Campbell wrote: > > I haven't been able to get to www.debian.org today or to ping it either. > > Is it down at present? Not another compromise I hope... > > Works for me, and I haven't heard anything about down

make-kpkg kernel-image .. missing modules

Hi I've been trying to recompile my kernel however the list of modules coming out is incomplete..   What i've been doing..   First off I got kernel-source.2.4.20 ..then i did make menuconfig  and decided on the stuff i want in the kernel.. next i did make-kpkg kernel-image which after a whi

Re: Jabberd segfault

On Mon, Dec 15, 2003 at 11:14:23AM -0500, Matthew Daubenspeck wrote: > I just upgraded my kernel to 2.4.23 (standard from kernel.org) and > everything is working great except for jabberd. > > After the system restart, it will no longer starts and just segfaults. > > $ /etc/init.d/jabber start > S

Re: Proxy and Firewall Recommendations?

On Mon, Dec 15, 2003 at 01:09:08AM -0800, Scarletdown wrote: > > So, what I need to know is, what would be a suitable set of packages > to download and install for routing and firewall services for him? Pretty much any iptables firewall package and squid. > Since I want to have this system ope

Re: Partition NTFS

Hello "Sébastien (Newsletters)" (<[EMAIL PROTECTED]>) wrote: > j'ai créé une partition NTFS sur mon système (avec FDISK pas de > problème) et j'ai ensuite créé un système de fichiers avec mkntfs. > Tout s'est bien passé, j'arrive à le monter mais je ne peux pas écrire > de données dessus, bien qu

Re: Correct place for networking commands in Debian?

I believe they should go into /etc/network/interfaces. You should also have a networking script in /etc/init.d and the appropriate symlinks in the /etc/rc.x directories. Lou > To set up my ADSL router I have to do: > > ifconfig eth0 192.168.1.1 netmask 255.0.0.0 up > route add default gw 1

FW: Sit Lab Ear Maintenance

> -Original Message- > From: Chris Mizerak > Sent: Wednesday, December 10, 2003 1:06 PM > To: Verance San Diego > Subject: Sit Lab Ear Maintenance > > We will be testing a new Master Switch replacement in the Sit Lab EAR on Thursday > (12/11) at 2:00pm. Unfortunately

FW: LynxOS Evaluation

> -Original Message- > From: Vinh Du [mailto:[EMAIL PROTECTED] > Sent: Wednesday, December 10, 2003 10:54 AM > To: Sreelal Chandrasenan > Subject: LynxOS Evaluation > > Hello Sreelal, > > How is the LynxOS evaluation going? Would you like to get a formal quotation from

FW: Sreelal - Your PracticalRF December e-Newsletter (P)(32107)

Title: PracticalRF e-Newsletter   -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]Sent: Wednesday, December 10, 2003 1:37 PMTo: Sreelal ChandrasenanSubject: Sreelal - Your PracticalRF December e-Newsletter (P)(32107) This email contains HTML. If it does not display

FW: LinuxDevices.com Newsletter for Dec. 11, 2003

-Original Message- From: LinuxDevices.com [mailto:[EMAIL PROTECTED] Sent: Wednesday, December 10, 2003 6:30 PM To: Sreelal Chandrasenan Subject: LinuxDevices.com Newsletter for Dec. 11, 2003 WELCOME TO THE LINUXDEVICES.COM WEEKLY NEWSLETTER December

FW: MD5 - Message Digest 5

-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Wednesday, December 10, 2003 11:44 PM To: Sreelal Chandrasenan Subject: MD5 - Message Digest 5 UNIX IN THE ENTERPRISE --- December 11, 2003 Published by ITworld.com -- changing the way you view IT http://www.itw

FW: Is your Java Application due for a tune up?

Title: Message   -Original Message-From: Java Buyer's Guide [mailto:[EMAIL PROTECTED]Sent: Wednesday, December 10, 2003 12:14 PMTo: javabuyerguideSubject: Is your Java Application due for a tune up?  

FW: 2003 Bestsellers, Part Deux

-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Wednesday, December 10, 2003 9:18 PM To: Sreelal Chandrasenan Subject: 2003 Bestsellers, Part Deux InformIT Promotions December 11, 2003 http://www.informit.com =Advertisement==

FW: GSPx Call for Papers: Embedded Signal Processing

Title: GSPx Call for Papers   -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]Sent: Thursday, December 11, 2003 2:11 AMTo: Sreelal ChandrasenanSubject: GSPx Call for Papers: Embedded Signal Processing

FW: About C/C++: C Programming Tips

Title: C/C++   -Original Message-From: John Kopp - About.com C/C++ Guide [mailto:[EMAIL PROTECTED]Sent: Thursday, December 11, 2003 4:26 AMTo: Sreelal ChandrasenanSubject: About C/C++: C Programming Tips  C/C++  In the Spotlight | More Topics

FW: Integrate powerful Reporting into your Java applications

-Original Message- From: Java Buyer's Guide [mailto:[EMAIL PROTECTED] Sent: Thursday, December 11, 2003 7:18 AM To: javabuyerguide Subject: Integrate powerful Reporting into your Java applications Dear Java Developer's Journal user, Have you ever wanted to generate and publish rich, in

FW: WLAN Implementation And Network Management

-Original Message- From: ITworld.com Webcasts [mailto:[EMAIL PROTECTED] Sent: Thursday, December 11, 2003 10:06 AM To: Sreelal Chandrasenan Subject: WLAN Implementation And Network Management Dear Colleague, Wireless LANs (WLANs) are gaining significantly in popularity and being deplo

FW: Prizes from the balloon toss

> -Original Message- > From: Jeanne Milbrand > Sent: Thursday, December 11, 2003 2:49 PM > To: Verance San Diego > Subject: Prizes from the balloon toss > > Please come see me if you still have not received your movie tickets. > > Thanks, > Jeanne > > Jeanne Milbrand

FW: Clarification

> -Original Message- > From: Jeanne Milbrand > Sent: Thursday, December 11, 2003 2:58 PM > To: Verance San Diego > Subject: Clarification > > The red raffle tickets are for the drawings at lunch tomorrow. Some of you received > slips of paper that named a prize. > >

FW: LynxOS legacy BSP

-Original Message- From: Babak A. Sarashki [mailto:[EMAIL PROTECTED] Sent: Thursday, December 11, 2003 4:42 PM To: Sreelal Chandrasenan Cc: Paul Farmer Subject: RE: LynxOS legacy BSP Sreelal, following are the instructions to build ACE/TAO: Following paths should be set export ACE_ROO

FW: Timesheet for Sreelal Chandrasenan for Pay Period 12/12/2003

-Original Message- From: Sreelal Chandrasenan Sent: Friday, December 12, 2003 9:12 AM To: Sreelal Chandrasenan Cc: Shane Allensworth Subject: Timesheet for Sreelal Chandrasenan for Pay Period 12/12/2003 Timesheet for Sreelal Chandrasenan for Pay Period 12/12/2003 Sreelal.Chandrasenan

FW: Directions to Emerald Restaurant

  -Original Message-From: Tammy Buscemi Sent: Friday, December 12, 2003 12:26 PMTo: Verance San DiegoSubject: Directions to Emerald Restaurant Hello,   The restaurant is on the corner of Convoy & Aero in Kearney Mesa.   805 South East on Balboa South (Right turn) onto Convoy a few blo

FW: New HP Forum Discussions for Fri Dec 12 18:15:02 EST 2003

-Original Message- From: HP Forums [mailto:[EMAIL PROTECTED] Sent: Friday, December 12, 2003 9:07 PM To: Sreelal Chandrasenan Subject: New HP Forum Discussions for Fri Dec 12 18:15:02 EST 2003 Dear Sreelal Chandrasenan ( CA699603 ), Hewlett-Packard is pl

FW: Let the GAMES Begin.....around 1:30pm

Title: FW: Let the GAMES Begin.around 1:30pm  -Original Message- From:   James Baggerly  Sent:   Thursday, December 11, 2003 11:38 AM To: Verance San Diego Subject:    Let the GAMES Begin.around 1:30pm Importance: High REINDEER GAME NUMBER 1: As sug

FW: New HP Forum Discussions for Sat Dec 13 17:29:56 EST 2003

-Original Message- From: HP Forums [mailto:[EMAIL PROTECTED] Sent: Saturday, December 13, 2003 7:53 PM To: Sreelal Chandrasenan Subject: New HP Forum Discussions for Sat Dec 13 17:29:56 EST 2003 Dear Sreelal Chandrasenan ( CA699603 ), Hewlett-Packard is

FW: ALL HANDS MEETING! 11:30am

Title: FW: ALL HANDS MEETING! 11:30am  -Original Message- From:   James Baggerly  Sent:   Friday, December 12, 2003 8:31 AM To: Verance San Diego Subject:    ALL HANDS MEETING!  11:30am Importance: High   REINDEER GAME NUMBER 2: Today's event is a TEAM e

FW: The latest Java product news

-Original Message- From: JavaWorld's Industry News [mailto:[EMAIL PROTECTED] Sent: Monday, December 15, 2003 12:19 AM To: Sreelal Chandrasenan Subject: The latest Java product news JavaWorld's Java Industry News -- December 15, 2003 http://www.javaworld.com HIGHLIGHTS * Java Product

FW: Timesheet for period ending 12-12-03

Title: Timesheet for period ending 4-4-03   -Original Message-From: Shane Allensworth Sent: Friday, December 12, 2003 8:58 AMTo: Verance AllSubject: Timesheet for period ending 12-12-03Importance: High Please follow the link below and submit your timesheet by noon Monday for the peri

FW: [ace-bugs] Digest Number 962

-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Monday, December 15, 2003 3:20 AM To: [EMAIL PROTECTED] Subject: [ace-bugs] Digest Number 962 Yahoo! Groups Sponsor -~--> KnowledgeStorm has over 22,000 B2B technology

FW: Santa Photos

  -Original Message-From: James Baggerly Sent: Friday, December 12, 2003 12:18 PMTo: Verance San DiegoSubject: Santa PhotosImportance: High I've had many requests already sothe initial copy of Santa Photos are available at:   http://www     Under Human Resources > Published Doc

FW: About Geography: Flu Map! 134 Trillion People? Geo-Tip of the Day

Title: Geography   -Original Message-From: Matt Rosenberg - About.com Geography Guide [mailto:[EMAIL PROTECTED]Sent: Monday, December 15, 2003 4:14 AMTo: Sreelal ChandrasenanSubject: About Geography: Flu Map! 134 Trillion People? Geo-Tip of the Day  Geography

FW: SMB Technology Newsletter

-Original Message- From: CMP Media LLC [mailto:[EMAIL PROTECTED] Sent: Monday, December 15, 2003 7:07 AM To: Sreelal Chandrasenan Subject: SMB Technology Newsletter ** The following is vendor information which you opted

FW: subscribe SChandrasenan@verance.com

-Original Message- From: SmartList [mailto:[EMAIL PROTECTED] Sent: Monday, December 15, 2003 8:56 AM To: Sreelal Chandrasenan Subject: Re: subscribe [EMAIL PROTECTED] You have added to the subscriber list of: [EMAIL PROTECTED] the following mail address: [EMAIL PROTEC

FW: iBCS emulator for Unix binaries

-Original Message- From: Chavdar Videff [mailto:[EMAIL PROTECTED] Sent: Monday, December 15, 2003 8:58 AM To: debian user Subject: Fwd: iBCS emulator for Unix binaries Concerning my previous post, I forgot to mention that somewhere I read that running the iBCS module can be achieved a

FW: eject won't work any more

-Original Message- From: H. S. [mailto:[EMAIL PROTECTED] Sent: Monday, December 15, 2003 9:03 AM To: [EMAIL PROTECTED] Subject: Re: eject won't work any more Joan Tur wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > Es Diumenge 14 Desembre 2003 22:21, en H. S. va escriure:

FW: yet another NVIDIA problem (4496)

-Original Message- From: Hugo Vanwoerkom [mailto:[EMAIL PROTECTED] Sent: Monday, December 15, 2003 7:50 AM To: [EMAIL PROTECTED] Subject: Re: yet another NVIDIA problem (4496) [EMAIL PROTECTED] wrote: > On Sun, Dec 14, 2003 at 06:03:03PM -0600, Stewart Jenkins wrote: > >>On Saturday 13

FW: lilo.conf

-Original Message- From: Alvin Oga [mailto:[EMAIL PROTECTED] Sent: Monday, December 15, 2003 8:02 AM To: Gavin Seddon Cc: debian list Subject: Re: lilo.conf hi ya gavin On Mon, 15 Dec 2003, Gavin Seddon wrote: > Hi, > I use lilo as my boot-loader and I need to add an "append" stateme

FW: XFree86 with i810 onboard graphics (Newbie)

-Original Message- From: Ricky Taylor [mailto:[EMAIL PROTECTED] Sent: Monday, December 15, 2003 8:06 AM To: 'Allan Cairns'; [EMAIL PROTECTED] Subject: RE: XFree86 with i810 onboard graphics (Newbie) When you started the install did you use bf24 to use the 2.4 Kernel? I had the same issu

FW: Can't install Debian on HDD w/Promise controller card

-Original Message- From: George Adams [mailto:[EMAIL PROTECTED] Sent: Monday, December 15, 2003 8:12 AM To: [EMAIL PROTECTED] Subject: Can't install Debian on HDD w/Promise controller card I'm sure this must be a FAQ, but I can't seem to find anything helpful googling for the answer. I

FW: postgresql and domain sockets

-Original Message- From: Monique Y. Herman [mailto:[EMAIL PROTECTED] Sent: Monday, December 15, 2003 8:22 AM To: [EMAIL PROTECTED] Subject: Re: postgresql and domain sockets On Mon, 15 Dec 2003 at 10:23 GMT, J.H.M. Dassen (Ray) penned: > On Mon, Dec 15, 2003 at 01:01:26 -0700, Monique Y

FW: Debian installation issue

-Original Message- From: Sreelal Chandrasenan Sent: Monday, December 15, 2003 9:09 AM To: [EMAIL PROTECTED] Subject: Debian installation issue One of the Pentium 4 box, when I instaled the Debian linux, I got nano_1.0.6_2_i386.deb corrupt error and I am unable to proceed further with

FW: Correct place for networking commands in Debian?

-Original Message- From: Jerome BENOIT [mailto:[EMAIL PROTECTED] Sent: Monday, December 15, 2003 7:55 AM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: Correct place for networking commands in Debian? Anthony Campbell wrote: > To set up my ADSL router I have to do: > > if

FW: changing roots on: dpkg -i

-Original Message- From: Rob Benton [mailto:[EMAIL PROTECTED] Sent: Monday, December 15, 2003 9:00 AM To: David Z Maze Cc: [EMAIL PROTECTED] Subject: Re: changing roots on: dpkg -i On Mon, 2003-12-15 at 09:50, David Z Maze wrote: > Rob Benton <[EMAIL PROTECTED]> writes: > > > I'm tryin

FW: PDF spec (Was: Re: ooh! debian jewelry)

-Original Message- From: Terry Hancock [mailto:[EMAIL PROTECTED] Sent: Monday, December 15, 2003 9:27 AM To: debian users Subject: Re: PDF spec (Was: Re: ooh! debian jewelry) On Sunday 14 December 2003 07:31 pm, Monique Y. Herman wrote: > On Sun, 14 Dec 2003 at 15:54 GMT, J.H.M. Dassen

Re: PDF spec (Was: Re: ooh! debian jewelry)

On Sunday 14 December 2003 07:31 pm, Monique Y. Herman wrote: > On Sun, 14 Dec 2003 at 15:54 GMT, J.H.M. Dassen (Ray) penned: > > On Sat, Dec 13, 2003 at 14:08:21 -0700, Monique Y. Herman wrote: > >> Hrm, I could have sworn that PDF was a spec published by Adobe and > >> freely usable, but google s

Re: changing roots on: dpkg -i

On Mon, 2003-12-15 at 09:50, David Z Maze wrote: > Rob Benton <[EMAIL PROTECTED]> writes: > > > I'm trying to install the xfree86 packages with the /opt directory as > > root. I've tried using --instdir but the install fails on the > > pre/postinst scripts. Is there an easy way to do this withou

Re: Correct place for networking commands in Debian?

Anthony Campbell wrote: To set up my ADSL router I have to do: ifconfig eth0 192.168.1.1 netmask 255.0.0.0 up route add default gw 192.168.1.2 eth0 Where is the correct Debian place to put these - /etc/network/interfaces perhaps, or should they go in rc.local? correct Anthony --

Re: postgresql and domain sockets

On Mon, 15 Dec 2003 at 10:23 GMT, J.H.M. Dassen (Ray) penned: > On Mon, Dec 15, 2003 at 01:01:26 -0700, Monique Y. Herman wrote: >> What have I missed? >> >> ( postgresql 7.3.4-9 on unstable ) > > postgresql-client 7.3.4-9 as well? Yes, sir! >> I just installed this package. When I try to do,

Re: Correct place for networking commands in Debian?

On Mon, Dec 15, 2003 at 05:01:35PM +, Anthony Campbell wrote: > At present mine reads: > > > # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8) > > # The loopback interface > # automatically added when upgrading > auto lo eth0 > iface lo inet loopback > address 127.

Debian installation issue

One of the Pentium 4 box, when I instaled the Debian linux, I got nano_1.0.6_2_i386.deb corrupt error and I am unable to proceed further with installation. I tried multiple times and I could not succeed. I could install debian on other Pentium3 systems using the same CD without any problem. E

Can't install Debian on HDD w/Promise controller card

I'm sure this must be a FAQ, but I can't seem to find anything helpful googling for the answer. I'm trying to install Debian woody (3.0r2) onto a new hard drive (WD1800JB, 180Gig Western Digital) in a new computer. It is the only hard drive in the machine, and the only other IDE device is DVD+R dr

RE: XFree86 with i810 onboard graphics (Newbie)

When you started the install did you use bf24 to use the 2.4 Kernel? I had the same issues at home on my i810 until I used that command to start the install. -Original Message- From: Allan Cairns [mailto:[EMAIL PROTECTED] Sent: Monday, December 15, 2003 8:21 AM To: [EMAIL PROTECTED] Subje

Re: lilo.conf

hi ya gavin On Mon, 15 Dec 2003, Gavin Seddon wrote: > Hi, > I use lilo as my boot-loader and I need to add an "append" statement to it in > order for my ide cdrw to work. Additionally, there is a SCSI tape drive on > the system. Will someone pls tell me the correct line required? vi /etc/l

Re: yet another NVIDIA problem (4496)

[EMAIL PROTECTED] wrote: On Sun, Dec 14, 2003 at 06:03:03PM -0600, Stewart Jenkins wrote: On Saturday 13 December 2003 02:05, Paul Johnson wrote: That is the crap driver I'm talking about. BTW, you can get it easier with apt...the nvidia-kernel and nvidia-glx packages are it. Interesting. I h

Re: eject won't work any more

Joan Tur wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Diumenge 14 Desembre 2003 22:21, en H. S. va escriure: Given the above ownership of scd0, the user should also belong to the "cdrecording" group. So either try adding this group to the user's groups, or try changing the ownership of

Re: Correct place for networking commands in Debian?

On 15 Dec 2003, Andr? Carezia wrote: > Anthony Campbell wrote: > > >To set up my ADSL router I have to do: > > > > ifconfig eth0 192.168.1.1 netmask 255.0.0.0 up > > route add default gw 192.168.1.2 eth0 > > > > > >Where is the correct Debian place to put these - /etc/network/interfaces > >perhap

Fwd: iBCS emulator for Unix binaries

Concerning my previous post, I forgot to mention that somewhere I read that running the iBCS module can be achieved against 2.4 kernel as well, apart from 2.2 kernels. Thanks again for your help Chavdar Videff --- Begin Message --- Dear List, For testing purposes I am trying to run binaries co

iBCS emulator for Unix binaries

Dear List, For testing purposes I am trying to run binaries compiled for SCO OpenServer by using the iBCS emulator said to support this. However I find certain difficulties in compiling the iBCS itself. What I first did was install the ibcs-base and ibcs-source-2.2 on Debian Woody. It tur

Re: Correct place for networking commands in Debian?

On Mon, Dec 15, 2003 at 03:34:27PM +, Anthony Campbell wrote: > To set up my ADSL router I have to do: > > ifconfig eth0 192.168.1.1 netmask 255.0.0.0 up > route add default gw 192.168.1.2 eth0 > > > Where is the correct Debian place to put these - /etc/network/interfaces > perhaps, or

Re: Correct place for networking commands in Debian?

Anthony Campbell wrote: To set up my ADSL router I have to do: ifconfig eth0 192.168.1.1 netmask 255.0.0.0 up route add default gw 192.168.1.2 eth0 Where is the correct Debian place to put these - /etc/network/interfaces perhaps, or should they go in rc.local? Add this to /etc/network/interfac

Re: How to know correct hardware options for compiling 2.4.23 kernel

Kenward: Did Dell have the information down to the chipsets that were used? I have yet to find that information... perhaps it's as simple as "all the chipsets that were used at Dell were made at Dell", but I haven't seen that statement made yet, so I didn't know for sure... For example, the ker

Partition NTFS

Bjr, j'ai créé une partition NTFS sur mon système (avec FDISK pas de problème) et j'ai ensuite créé un système de fichiers avec mkntfs. Tout s'est bien passé, j'arrive à le monter mais je ne peux pas écrire de données dessus, bien que monté en rw. Des idées ??? -- To UNSUBSCRIBE, email to [EMAI

Re: eject won't work any more

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Es Diumenge 14 Desembre 2003 22:21, en H. S. va escriure: > Given the above ownership of scd0, the user should also belong to the > "cdrecording" group. So either try adding this group to the user's > groups, or try changing the ownership of the scd0 g

Jabberd segfault

I just upgraded my kernel to 2.4.23 (standard from kernel.org) and everything is working great except for jabberd. After the system restart, it will no longer starts and just segfaults. $ /etc/init.d/jabber start Starting jabberd: Is all I get, and if I try to start it manually, I get: $ /usr/

Note for woody epson 1250 users, was: xsane on woody

Hugo Vanwoerkom wrote: Hi list! I am setting up *Backstreet Ruby* the multi-seat Linux option on woody. Had to recompile X 4.3.0: works great... Have a problem with xsane. On woody it's version 0.84-2. When doing any scanning the colors look extremely weird, sort of like a color negative. Googli

subscribe

subscribe _ Don’t worry if your Inbox will max out while you are enjoying the holidays. Get MSN Extra Storage! http://join.msn.com/?PAGE=features/es -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". T

Re: changing roots on: dpkg -i

Rob Benton <[EMAIL PROTECTED]> writes: > I'm trying to install the xfree86 packages with the /opt directory as > root. I've tried using --instdir but the install fails on the > pre/postinst scripts. Is there an easy way to do this without having to > build my own package? No. In general, dpkg'

Correct place for networking commands in Debian?

To set up my ADSL router I have to do: ifconfig eth0 192.168.1.1 netmask 255.0.0.0 up route add default gw 192.168.1.2 eth0 Where is the correct Debian place to put these - /etc/network/interfaces perhaps, or should they go in rc.local? Anthony -- [EMAIL PROTECTED]|| http://www.a

Re: Debian down at present?

On Mon, Dec 15, 2003 at 03:23:38PM +, Anthony Campbell wrote: > I haven't been able to get to www.debian.org today or to ping it either. > Is it down at present? Not another compromise I hope... Works for me, and I haven't heard anything about downtime. You're probably just suffering some loca

Re: Debian down at present?

I just tried the site and CAN get to it. At Monday, 15 December 2003, Anthony Campbell <[EMAIL PROTECTED]> wrote: >I haven't been able to get to www.debian.org today or to ping it either. >Is it down at present? Not another compromise I hope... > >Anthony > >-- >[EMAIL PROTECTED]|| http:/

Debian down at present?

I haven't been able to get to www.debian.org today or to ping it either. Is it down at present? Not another compromise I hope... Anthony -- [EMAIL PROTECTED]|| http://www.acampbell.org.uk using Linux GNU/Debian || for book reviews, electronic Windows-free zone || books and skeptica

Re: My Debian box can't connect Internet

On Mon, Dec 15, 2003 at 08:44:33PM +0100, Robert Storey wrote: > It's very odd that you can't change this file as root. The only thing I > know of that would cause this is if the immutable flag is set. The way > to find out is with the lsattr command: > > [EMAIL PROTECTED]:/etc> lsattr resolv.co

Re: Debian installation trouble on server

On Sun, 14 Dec 2003 06:10:07 +0100, Arnt Karlsen <[EMAIL PROTECTED]> wrote: >..2 basic ways: install Knoppix, edit /etc/apt/sources.list, then >' apt-get update; apt-get dist-upgrade ', or, if you have 2 cd's >or disk space, either use the 'tohd=/dev/your-disk", then eject the >knoppix cd and put i

Re: disabling inetd

Vineet Kumar wrote: > * Initech ([EMAIL PROTECTED]) [031212 13:42]: > > On Fri, Dec 12, 2003 at 01:20:42PM -0600, Rick Weinbender wrote: > > > I've heard that the inetd process is not very secure. > > That's not necessarily true. What is "not very secure" is running any > service you don't need

Re: My Debian box can't connect Internet

Dear Stephen, It's very odd that you can't change this file as root. The only thing I know of that would cause this is if the immutable flag is set. The way to find out is with the lsattr command: [EMAIL PROTECTED]:/etc> lsattr resolv.conf s---c resolv.conf As you don't see an "i" th

lilo.conf

Hi, I use lilo as my boot-loader and I need to add an "append" statement to it in order for my ide cdrw to work. Additionally, there is a SCSI tape drive on the system. Will someone pls tell me the correct line required? Gavin. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject o

XFree86 with i810 onboard graphics (Newbie)

Hi, Sorry if this is repeating a topic you've seen a dozen times before but I'm having real trouble starting X on my old celery 400 with the Intel i810 onboard graphics chip. I installed Debian Woody fresh and selected the i810 chip from the list. I also went conservative with my monitor setti

Re: yet another NVIDIA problem (4496)

On Sun, Dec 14, 2003 at 06:03:03PM -0600, Stewart Jenkins wrote: > On Saturday 13 December 2003 02:05, Paul Johnson wrote: > > > > That is the crap driver I'm talking about. BTW, you can get it easier > > with apt...the nvidia-kernel and nvidia-glx packages are it. > > > > Interesting. I had l

i810_audio problem

My manager bought me a new Desktop for the office. With XFree4.3 (from experimental) I could get my X11 to work. But so far I had no success with my sound. I am using the 2.4.23 kernel. This is the message from dmesg: Intel 810 + AC97 Audio, version 0.24, 14:44:17 Dec 11 2003 i810_audio: Pure MM

Galeon 1.3.10 on sid (ppc)

Hi I've just ugraded from sarge to sid and using aptitude. I tried to install galeon. However, aptitude reported errors and so I tried to remove it using aptitude, dpkg -P, and apt-get remove. All of these produce the following error: dpkg: error processing galeon (--purge): Package is in a ve

Re: Need install help -mig from RedHat to Debian

Hello Gruessle (<[EMAIL PROTECTED]>) wrote: > I hat problems installing my mouse, video card and monitor with Debian > > So what I did is I installed RedHat and got the config for those: > > Monitor: > DDC Probed Monitor = Compac V70 > Horizontal (30-69) > Vertical (50-125) > > Video Card: > R

Re: kernel expolit. is 2.4.18-bf2.4 affected?

On Mon, Dec 15, 2003 at 12:36:30AM -0800, Karsten M. Self wrote: > on Mon, Dec 15, 2003 at 06:33:39PM +1300, Paul William ([EMAIL PROTECTED]) wrote: > > Hi all, > > > > Is the stock woody 2.4.18-bf2.4 kernel affected by the kernel exploit > > that was used to attack the debian.org servers? If it i

Re: Language package for KDE

Hello "Sébastien (Newsletters)" (<[EMAIL PROTECTED]>) wrote: > I'm installing Debian 3.0r1 on my laptop and I begin to have things > working. The X is working well but KDE doesn't seem to have the French > tranlation installed. Where can I get it ? apt-get install kde-i18n-fr The package is on

Re: Need install help -mig from RedHat to Debian

On Mon, 15 Dec 2003 04:35:43 -0800 "Gruessle" <[EMAIL PROTECTED]> wrote: > > > Hi, Hello, > > I hat problems installing my mouse, video card and monitor with Debian > > So what I did is I installed RedHat and got the config for those: > > Monitor: > DDC Probed Monitor = Compac V70 > Horizont

Re: Grub problems

On Sun, 14 Dec 2003 12:27:04 -0600, Damon L. Chesser wrote: >> > Not at all! I will try something like that to be able to boot Debain. > As of now I have no way to boot the Debian install. since lilo did not > write to the drive. In fact, the installer, might not have correctly > written (and

Re: shell prompt for xwindows

On Mon, Dec 15, 2003 at 04:51:34AM -0800, Gruessle wrote: > > > What is the shell prompt for xwindows? Run xterm, rxvt, wterm, eterm, kterm or other xshells. (See your KDE/Gnome or other menu in X11). Regards Johann -- Johann Spies Telefoon: 021-808 4036 Informasietegnologie, Universi

<    1   2   3   4   >