Bonjour,
Le samedi 07 avril 2007, mahashakti89 a écrit...
# mount -rw -t ufs -o ufstype=ufs2 /dev/sda5 /mnt
mais je ne peux pas écrire Qu'ai je oublié ???
Les droits sur /mnt ?
--
jm
A.E.L. Sarl (R.C.S CASTRES 490843240)
http://www.affaires-en-ligne.com
--
Lisez la FAQ de
Bonjour,
De mémoire, le support en écriture UFS n'est pas activé par défaut dans le
noyau debian (à cause des nombreuses sous-versions de UFS, pour certaines
desquelles ce support en écriture est dangereux): il faut donc recompiler.
Mais de toute façon, le support en écriture du sous-type ufs2
Bonjour,
Connaissez-vous un live cd lancant un serveur ssh automatiquement au
demarrage ainsi qu'un client dhcp?
Ca pourrait etre pratique pour faire des sauvegarde de mon serveur, sans
trop me casser la tete à remettre un écran.
Merci :-)
--
Lisez la FAQ de la liste avant de poser une
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
didier gaumet a écrit :
Bonjour,
De mémoire, le support en écriture UFS n'est pas activé par défaut dans le
noyau debian (Ã cause des nombreuses sous-versions de UFS, pour certaines
desquelles ce support en écriture est dangereux): il faut
Bonjour,
Le samedi 07 avril 2007, mahashakti89 a écrit...
Les droits sur /mnt sont :
drwxr-xr-x 5 root root 4096 2007-03-09 19:04 .
drwxr-xr-x 21 root root 4096 2007-04-07 07:47 ..
Donc seul root peut écrire. Et il ne peut pas ?
--
jm
A.E.L. Sarl (R.C.S CASTRES 490843240)
Hello,
Je voulais savoir si le fait de mettre le PC à l'heure UTC et de choisir
le fuseau GMT était suffisant pour ne pas passer en heure d'été/hiver ?
D'avance merci,
Fabien
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Vous pouvez aussi
On Sat, 07 Apr 2007 11:10:41 +0200, mahashakti89 wrote:
Les droits sur /mnt sont :
drwxr-xr-x 5 root root 4096 2007-03-09 19:04 .
drwxr-xr-x 21 root root 4096 2007-04-07 07:47 ..
Les droits sur /mnt sont écrasés par le type de mount exécuté: pour un
système de fichiers ufs (n'importe quel
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jean-Michel OLTRA a écrit :
Bonjour,
Le samedi 07 avril 2007, mahashakti89 a écrit...
Les droits sur /mnt sont :
drwxr-xr-x 5 root root 4096 2007-03-09 19:04 .
drwxr-xr-x 21 root root 4096 2007-04-07 07:47 ..
Donc seul root
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
didier gaumet a écrit :
On Sat, 07 Apr 2007 11:10:41 +0200, mahashakti89 wrote:
Les droits sur /mnt sont :
drwxr-xr-x 5 root root 4096 2007-03-09 19:04 .
drwxr-xr-x 21 root root 4096 2007-04-07 07:47 ..
Les droits sur /mnt sont écrasés
OoO En cette fin de matinée radieuse du samedi 07 avril 2007, vers
11:17, debian-mail [EMAIL PROTECTED] disait:
Je voulais savoir si le fait de mettre le PC à l'heure UTC et de
choisir le fuseau GMT était suffisant pour ne pas passer en heure
d'été/hiver ?
Quelle idée bizarre ? Si tu
On Sat, Apr 07, 2007 at 11:17:02AM +0200, debian-mail wrote:
Hello,
Je voulais savoir si le fait de mettre le PC à l'heure UTC et de choisir
le fuseau GMT était suffisant pour ne pas passer en heure d'été/hiver ?
Aucune idee! Mais je ne pense pas que cela soit trop complique a tester,
non ?
On Sat, 07 Apr 2007 11:45:22 +0200, mahashakti89 wrote:
Le support en lecture et en écriture est activé dans le noyau
donc tu as bien CONFIG_UFS_FS_WRITE=y dans ton fichier de config du noyau ?
Quoiqu'il en soit, ufs2 n'est pas supporté en écriture (voir la doc dans
tu utilises le pavé numérique ?? moi j'ai un portable.
Gaëtan PERRIER a écrit :
Le Fri, 30 Mar 2007 16:05:35 +0200
ml [EMAIL PROTECTED] a écrit:
Bonjour à tous!!
Lors de la mise à jour de IceWeasel (2.0.0.3 sur Debian Testing),
je suis aperçu que les touches 'Alt + Numero
Bonjour,
Depuis déjà quelque temps, j'ai des soucis avec mon laptop sous etch. Juste
après le boot, la connexion wifi s'établit correctement sur ma freebox,
mais au bout d'un certain temps (en apparence aléatoire), elle disparait.
Enfin, plus précisément, ifconfig voit la connexion active, mais
Bonjour,
J'ai voulu tester un noyau de backports 2.6.18 sous mon serveur debian
sarge, vu que je suis actuellement sous la 2.6.15-686-smp de backports,
mais apparemment, ca foire pour la 2.6.18-3-686 et 2.6.18-4-686, avec
les mm types de messages:
~# aptitude install
mpg a écrit :
Bonjour,
Depuis déjà quelque temps, j'ai des soucis avec mon laptop sous etch. Juste
après le boot, la connexion wifi s'établit correctement sur ma freebox,
mais au bout d'un certain temps (en apparence aléatoire), elle disparait.
Enfin, plus précisément, ifconfig voit la
On Sat, Apr 07, 2007 at 12:43:32PM +0200, Vincent Bernat wrote:
OoO En cette fin de matinée radieuse du samedi 07 avril 2007, vers
11:17, debian-mail [EMAIL PROTECTED] disait:
Je voulais savoir si le fait de mettre le PC à l'heure UTC et de
choisir le fuseau GMT était suffisant pour
Merci à tous pour vos infos.
A propos de madwifi, vaut-il mieux installer depuis les packages, ou
depuis les sources ?
Merci,
Patrice.
OoO En ce début d'après-midi ensoleillé du samedi 07 avril 2007, vers
15:50, Thierry B [EMAIL PROTECTED] disait:
Les paquets suivants ont été conservés :
yaird
Les NOUVEAUX paquets suivants vont être installés :
linux-image-2.6.18-3-686
[...]
Using mkinitrd.yaird to build the ramdisk.
Vincent Bernat a écrit :
OoO En ce début d'après-midi ensoleillé du samedi 07 avril 2007, vers
15:50, Thierry B [EMAIL PROTECTED] disait:
Les paquets suivants ont été conservés :
yaird
Les NOUVEAUX paquets suivants vont être installés :
linux-image-2.6.18-3-686
[...]
Using
Le 13610ième jour après Epoch,
Vincent Bernat écrivait:
OoO En cette fin de matinée radieuse du samedi 07 avril 2007, vers
11:17, debian-mail [EMAIL PROTECTED] disait:
Je voulais savoir si le fait de mettre le PC à l'heure UTC et de
choisir le fuseau GMT était suffisant pour ne pas
Le 13610ième jour après Epoch,
Franck Joncourt écrivait:
On Sat, Apr 07, 2007 at 11:17:02AM +0200, debian-mail wrote:
Hello,
Je voulais savoir si le fait de mettre le PC à l'heure UTC et de choisir
le fuseau GMT était suffisant pour ne pas passer en heure d'été/hiver ?
Aucune idee! Mais
Salut
Le samedi 7 avril 2007 18:23, Patrice OLIVER a écrit :
Merci à tous pour vos infos.
A propos de madwifi, vaut-il mieux installer depuis les packages, ou
depuis les sources ?
J'utilise d'habitude les sources via svn, mais en voulant faire une mise à
jour hier, ça a complètement gelé
OoO Pendant le repas du samedi 07 avril 2007, vers 19:00,
[EMAIL PROTECTED] (François TOURDE) disait:
[...] l'heure du système qui, par
convention, est en GMT.
Disons plutôt qu'elle est GMT si on a bien répondu à la bonne question
lors de l'install :)
Mais il est
OoO Lors de la soirée naissante du samedi 07 avril 2007, vers 18:54,
Thierry B [EMAIL PROTECTED] disait:
Using mkinitrd.yaird to build the ramdisk.
yaird error: bad value in /boot/config-2.6.18-3-686:
CONFIG_DEFCONFIG_LIST=/lib/modules/$UNAME_RELEASE/.config (fatal)
mkinitrd.yaird failed
Vincent Bernat a écrit :
OoO Lors de la soirée naissante du samedi 07 avril 2007, vers 18:54,
Thierry B [EMAIL PROTECTED] disait:
Using mkinitrd.yaird to build the ramdisk.
yaird error: bad value in /boot/config-2.6.18-3-686:
CONFIG_DEFCONFIG_LIST=/lib/modules/$UNAME_RELEASE/.config
Le Tue, 3 Apr 2007 20:57:18 +0200, Patrice OLIVER a voulu dire :
[...]
Lorsque j'essai d'imprimer une page de test, j'ai cela dans les logs :
E [03/Apr/2007:20:50:13 +0200] [Job 5] Gutenprint Fatal error: Unable
to find driver named EPSON Stylus C48!
E [03/Apr/2007:20:50:14 +0200] PID 4566
OoO Pendant le journal télévisé du samedi 07 avril 2007, vers 20:43,
Thierry B [EMAIL PROTECTED] disait:
Quand je veux enlever yaird, il veut m'enlever mon noyau courant et
d'autres aussi (tous les noyaux backports):
C'est curieux. Dans mon souvenir, les noyaux de backports acceptent
Vincent Bernat a écrit :
OoO Pendant le journal télévisé du samedi 07 avril 2007, vers 20:43,
Thierry B [EMAIL PROTECTED] disait:
Quand je veux enlever yaird, il veut m'enlever mon noyau courant et
d'autres aussi (tous les noyaux backports):
C'est curieux. Dans mon souvenir, les
Thierry B a écrit :
Vincent Bernat a écrit :
OoO Pendant le journal télévisé du samedi 07 avril 2007, vers 20:43,
Thierry B [EMAIL PROTECTED] disait:
Quand je veux enlever yaird, il veut m'enlever mon noyau courant et
d'autres aussi (tous les noyaux backports):
C'est curieux. Dans mon
Thierry B a écrit :
Thierry B a écrit :
Vincent Bernat a écrit :
OoO Pendant le journal télévisé du samedi 07 avril 2007, vers 20:43,
Thierry B [EMAIL PROTECTED] disait:
Quand je veux enlever yaird, il veut m'enlever mon noyau courant et
d'autres aussi (tous les noyaux backports):
Bonjour,
J'utilise iceweasel et son option pour retenir les mots de passe.
Depuis quelque temps (aprés une mise a jour?), il ne me rappelle plus
les mots de passe.
Je suis obligé de regarder dans la gestion des mots de passe pour me
rappeller celui-ci. Puis, une fois que j'ai indiqué celui-ci,
didier gaumet a écrit :
| On Fri, 06 Apr 2007 06:03:26 +0200, Zuthos wrote:
|
| Bonjour,
| Je me suis décidé à utiliser GNUstep.
| Je l'ai donc installé par un:
| aptitude install gnustep
| Pas de PB jusqu'ici.
| Ensuite, j'ai voulu l'intégrer au menu gdm en créant un fichier
|
On Sat, Apr 07, 2007 at 10:10:04AM -0300, Cuyoplacas - gmarkus wrote:
Hola Lista, tengo una duda con respecto a este error que me esta dando el
postfix. Comento un poco el error: de una empresa (xxx) me estan reportando
q no llegan los correos q ellos envian, de nuestra parte(midominio) si
Yo solo estoy autorizado a opinar sobre lo que yo pienso.
Por lo tanto cuando leas un si o un no debes tener en cuenta que
significa: para mi, si o para mi, no.
Demasiado profundo... me doy...
Por mi lado, te deseo felices pascuas y feliz 2008.
2008? Me sigo sorprendiendo
Para mi
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
El sábado 07 de abril del 2007 a las 01:35:19,
Daniel Bareiro escribió:
ahora intento instalar, pero tengo algunos inconvenientes en el
proceso:
[...]
Parecería que hay algunos archivos que no encuentran y por esa razón
falla el proceso de
Hola Lista, tengo una duda con respecto a este error que me esta dando el
postfix. Comento un poco el error: de una empresa (xxx) me estan reportando q no
llegan los correos q ellos envian, de nuestra parte(midominio) si salen
correctamente y llegan bien.
Viendo los logs para poder rastrear
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, Apr 06, 2007 at 10:35:19PM -0300, Daniel Bareiro wrote:
[ Problemas para instalar udev]
Parece que encontré por qué no lo instalaba.
[ y la solución]
¡Qué bien!
PD: ¿Estás usando PGP/MIME? Porque me da la impresión que
probablemente
- Mensaje original -
De: Blu [EMAIL PROTECTED]
Para: debian-user-spanish@lists.debian.org
Enviado: Sábado, 07 de Abril de 2007 10:49 a.m.
Asunto: Re: Mensaje de error Postfix
On Sat, Apr 07, 2007 at 10:10:04AM -0300, Cuyoplacas - gmarkus wrote:
Hola Lista, tengo una duda con
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
El 07/04/07 17:32, Luis Rodrigo Gallardo Cruz escribió:
(...)
Oh. Núnca había pensado en eso. Voy a ver si puedo convencer a mi mutt
de hacerlo. Pero, dado que los RFCs para PGP/MIME son de 2001 o
previos, la verdad no pienso esforzarme mucho, a
2007/4/7, Horacio Castellini horacio9573gmail.com:
Yo solo estoy autorizado a opinar sobre lo que yo pienso.
Por lo tanto cuando leas un si o un no debes tener en cuenta que
significa: para mi, si o para mi, no.
Demasiado profundo... me doy...
Por mi lado, te deseo felices pascuas y feliz
On Sat, Apr 07, 2007 at 05:57:57PM +0200, Santiago José López Borrazás wrote:
Lo del PGP/MIME, se puede solucionar en el momento de terminar de editar el
mensaje, _ANTES de mandar_, pulsando CTRL + P, creo que es, y es cuando te
da las opciones seguidas para hacerle entender al MUTT, de que lo
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
El 07/04/07 18:26, Luis Rodrigo Gallardo Cruz escribió:
Claro. Pero por 'convencer a mi mutt' me refería a hacer que *él* se
acuerde de hacer eso cada que envíe correo a la lista y no cuando
envío a otros lados. De otra forma habría que confiar
Estimados:
Le tengo ganas a un celular con PDA (o PDA con celular, lo que gusten)
¿Sabe alguno cuál es el que mejorcito corre un Linux cualquiera?
No tengo ganas de andar pagándole plata a Guillermito Puertas.
Gracias.
JAP
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
El sábado 07 de abril del 2007 a las 15:57:57,
Santiago José López Borrazás escribió:
Oh. Núnca había pensado en eso. Voy a ver si puedo convencer a mi
mutt de hacerlo. Pero, dado que los RFCs para PGP/MIME son de 2001 o
previos, la verdad no
Hola lista,
Estoy intentando sincronizar mi móvil pda. Intento seguir este manual:
http://linuca.org/body.phtml?nIdNoticia=330. En el primer paso,
conecto la pda y pongo tail -f /var/log/syslog. Me sale esto:
baby0:/home/jordi# tail -f /var/log/syslog
Apr 7 21:57:49 baby0 kernel: EXT3 FS on
El 6/04/07, Santiago Yegros [EMAIL PROTECTED] escribió:
Bueno, tengo poca experiencia con bd's. Estaba tratando de instalar
postgres y usarlo con java.
Mi problema es: no puedo acceder a la db, el servidor esta levantado y
funcionando, pero al tratar de usar pgadmin, me da el sgte error:
The
Hi!
He tenido problemas con un disco justo en momento
de instalacion de un paquete, y no hubo mas suerte
que reiniciar la maquina.
Hacer eso, llevo a que fsck eliminara el archivo
en /var/lib/dpkg/status, tambien el available, pero
este ultimo no es problema.
El directorio /var/lib/dpkg/info
Le samedi 07 avril 2007 00:12, Miguel Da Silva - Centro de Matemática a
écrit :
Ah claro, me faltó decir que para acceder a la solución fue necesario
gastar US$ 13,00, pero bueno, todo bien.
¿?
Es que me compré un teclado nuevo :)
Ahora entiendo mejor ;-)
Salu2
--
Claude Micouin [EMAIL
Pues he recompilado el kernel quitando las opciones que decia Iñigo
CONFIG_AGP_NVIDIA, CONFIG_FB_NVIDIA y CONFIG_FB_RIVA, vuelvo a
compilar el driver de nvidia con 'm-a a-i nvidia' y cuando arranco las
X en unos 2min. se queda frito, estoy pensando que igual es la grafica
que esta jodida y es que
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Lo-Ko escribió:
Pues he recompilado el kernel quitando las opciones que decia Iñigo
CONFIG_AGP_NVIDIA, CONFIG_FB_NVIDIA y CONFIG_FB_RIVA, vuelvo a
compilar el driver de nvidia con 'm-a a-i nvidia' y cuando arranco las
X en unos 2min. se queda
ola a todos.estou tendo a tempo um erro que ate agora não entendi como
posso resolver.
pesquisando na net achei outras pessoal com este problema e num disse que
era que:
Significa que o seu processador está acima da temperatura de alerta. A
última vez que vi esse tipo de mensagem era porque
Segue o que fiz:
# ifconfig wlan0 10.0.0.1 netmask 255.0.0.0 up
# iwconfig wlan0 mode Ad-Hoc
# iwconfig wlan0 essid rede_domestica
# iwconfig wlan0 channel 8
# iwconfig wlan0 key off
Só mudei obviamente o IP na segunda máquina, quando tento ativar o
transmissor com iwconfig wlan0 txpower on
Amigos...
Estou com um p*** problema aqui...
Meu xorg nao suporta 1024x768...
Vou mandar o log do xorg, e me digam por favor se tem algo de errado...
# cat /etc/X11/xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian
Leo Bozo escreveu:
Amigos...
Estou com um p*** problema aqui...
Meu xorg nao suporta 1024x768...
Vou mandar o log do xorg, e me digam por favor se tem algo de errado...
[...]
Ta ai.
Ele tem as resoluções listadas, mas não usa 1024x768.
Se souberem a resposta por favor respondam.
Olá,
Quem
Olá.
Pelo que eu vi você está com todos os pacotes necessários para rodar o
mapserver
como cgi, então não está ai o problema. O erro que está acontecendo é no
momento de
salvar a imagem gerada pelo mapserver, eu apostaria em algum problema com
esse diretorio
, como você falou que o diretorio
Quase certeza absoluta que a temperatura está subindo, sim.
De vez em quando eu testo meu micro, que aliás é muito semelhante ao
teu, rodando algo que consuma bastante processo e verifico os monitores
de temperatura e rotação dos coolers. Tenho instalado um cooler de
gabinete de 120mm, fonte
Leo Bozo escreveu:
Tony, não to encontrndo essas frequencias la atrás...
Junior, mas isso não vai fazer com que (na pior das hipoteses) queimar
meu monitor?
x.x
On 4/7/07, * Junior Polegato - Linux* [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
Leo Bozo escreveu:
Amigos...
Olá.
O base do openoffice faz algumas conversões se não estou enganado,
tente abrir o arquivo
com ele e ver se é posssível exportar como texto. Tem alguns programas
especificos para dba
que possibilitam conversão entre BD's diferentes, talvez você encontre algum
desse programas
que tambem
Caríssimos,
Gostaria que me perdoassem por usar este espaço para um assunto que não
é o fim para o qual a lista se destina, porém está de certa forma
relacionado.
Há anos utilizo so serviços da Brasil telecom no estado do Mato Grosso
(MT) e infelizmente não se pode dizer que o
Galera,
alguem dabe me dizer como criar um arquivo de log separado para o
DHCP3-server?
Att
Gustavo de Carvalho
A O.S. Systems anuncia o lançamento oficial do O.S. Desktop 7.1. Um
sistema operacional completo, fácil de instalar e utilizar. Baseado no
Debian GNU/Linux, fruto de um rigoroso ciclo de análise,
desenvolvimento e testes.
Convidamos a comunidade à experimentar o O.S. Desktop. Uma experiência
Salve!
Pô! Assim não dá! Os caras publicam dicas? Vai encher de gente sem noção na
Arena.. Hm.. pensando melhor até que pode ser um bom negócio para os
outros...
Um cara me disse que acha que vai ter premiação boa.. Será que vai ser um
daqueles servidores da Sun que eles sortearam no ano
A Política de Proteção contra vírus e spam's do Ministério da Saúde apagou a
mensagem enviada por conter anexo(s) com extensão(ões) não autorizada(s).
eu realmente nao estou conseguindo instalar segui varios tutoriais e nao
obtive os resultados ... durante a instalação do driver da ati ele da esses
erros
etected configuration:
Architecture: i686 (32-bit)
X Server: Xorg 7.1.1
find: install/usr/X11R6/lib/modules/dri: Arquivo ou diretório não
Vai ver a Feira tá chegando e eles acham q não vai fechar os 40 inscritos...
:P
Abraço!
Em 07/04/07, brinvertia [EMAIL PROTECTED] escreveu:
Salve!
Pô! Assim não dá! Os caras publicam dicas? Vai encher de gente sem noção
na Arena.. Hm.. pensando melhor até que pode ser um bom negócio
All,
Conhecem ferramentas, técnicas para instalação de maquinas Linux em Lote?
Preciso de algo que, ligando a maquina na rede e colocando um meio de boot e
este de acordo com algumas configurações formatasse o disco IDE/SATA,
instalar o SO e alguns pacotes.
Estou estudando o UDPCAST, mas este é
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 04/07/2007 07:43 AM, Geilson wrote:
Segue o que fiz:
# ifconfig wlan0 10.0.0.1 netmask 255.0.0.0 up
Tente configurar o IP _depois_ que a camada física estiver
definida, ou seja, que o modo ad-hoc estiver ok.
# iwconfig wlan0 mode
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 04/06/2007 09:00 PM, Eduardo Sachs wrote:
Felipe, eu já vi você falar sobre Kerberos algumas vezes,
e teve uma vez que você me falou que o Kerberos resolvia a
questão da autenticação única, Single Sing-On, eu fui estudar
a solução, e
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 04/06/2007 11:07 PM, Leandro Moreira wrote:
Felipe,
Por acaso vc nao teria material de como configurar o cyrrus
no LDAP ? Se tivesse e puder me fornecer ou me indicar onde
possa encontrar agraceria.
Depende do que você quer configurar
Olá.
Para fazer o que você deseja você pode user o Debian Fai e o cfengine.
Procure informações sobre essas ferramentas.
At+
Oéslei.
Em 07/04/07, Valter Soares [EMAIL PROTECTED] escreveu:
All,
Conhecem ferramentas, técnicas para instalação de maquinas Linux em Lote?
Preciso de algo que,
I use sarge, have a file that use Chinese (GB code) in file name.
reading/writing it in ext2 seems OK, but I have problem copying to vfat
partition.
-
Get your own web address.
Have a HUGE year through Yahoo! Small Business.
This NTLMAPS makes a config error due to which Aptitude complains everytime
I run it. I configured NTLMAPS manually; how can I inform Aptitude that its
configuration was successful?
--
Masatran, R. Deepak http://research.iiit.ac.in/~masatran/
pgpPlhKhrOVSA.pgp
Description: PGP signature
Original Message
Subject:Re: Resolution gets displayed incorrectlly(with nvidia driver)
Date: Fri, 6 Apr 2007 18:12:44 +0100
From: redhat penguin [EMAIL PROTECTED]
To: Joe Hart [EMAIL PROTECTED]
References:
[EMAIL PROTECTED]
[EMAIL PROTECTED]
Im using debian
Dennis G Wicks writes:
I was trying to install a package, Gnome-RDP, and it popped
up a message that it can't find c#.
Is there one? If so where? Can't find one on debian.org.
Debian etch incudes mono-gmcs which is a C# compiler. See
On Fri, 06 Apr 2007 23:00:36 -0700, Li Wei wrote:
I use sarge, have a file that use Chinese (GB code) in file name.
reading/writing it in ext2 seems OK, but I have problem copying to
vfat partition.
Hi,
maybe mount your vfta partition with the appropriate codepage option will
solve
Hi folks
Just a quick question: aside from Emacs, is there a Common Lisp IDE for
Debian Etch? Ideally, I had something in mind like the Dr Scheme IDE
(although not with the different language levels and pedagogic set up)
or Python's Idle, something with a text window and an interpreter as
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Matt Miller wrote:
I've attached an external hard drive to my etch AMD64 box, and I want to
build an etch i386 system on it. I partitioned the drive, and used
debootstrap to lay down a minimal i386 system on the drive. The problem
is that I want
On 4/7/07, Greg Folkert [EMAIL PROTECTED] wrote:
On Fri, 2007-04-06 at 13:40 -0700, Andrew Sackville-West wrote:
On Fri, Apr 06, 2007 at 11:26:46PM +0530, Siju George wrote:
So where did 27 ( 500 -473 ) GB go?
Is there any error in my Calculations?
disk drive manufacturers label their
On 4/7/07, Joe Hart [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Matt Miller wrote:
I've attached an external hard drive to my etch AMD64 box, and I want to
build an etch i386 system on it. I partitioned the drive, and used
debootstrap to lay down a minimal i386
On Fri, 6 Apr 2007 15:14:35 -0400 (EDT) eklektik wrote:
For me the problem is that etch default look and feel is totally
out of date. Even those who doesn't have artistic training can sense
that the artworks are amateurish. When I showed the artworks to my
graphic designer friends they were
I add codepage=936 to mount options, it doesn't help. Thanks anyway!
didier gaumet [EMAIL PROTECTED] wrote: On Fri, 06 Apr 2007 23:00:36 -0700, Li
Wei wrote:
I use sarge, have a file that use Chinese (GB code) in file name.
reading/writing it in ext2 seems OK, but I have problem
it's long overdue,
when etch will become stable?
How unstable is it now(how many bug it has now)?
-
TV dinner still cooling?
Check out Tonight's Picks on Yahoo! TV.
The system tray on the KDE panel does not display icons for some of the
applications I designate in the KDE menu editor to be displayed there.
For instance, I want Kjots and Knotes icons to be in the system tray and
so indicated in the KDE menu; but they do not appear.
Another example: the
On Sat, Apr 07, 2007 at 02:45:56AM -0700, Li Wei wrote:
it's long overdue,
No it's not - it's been there for years - it's just that it's been
labelled as testing :)
when etch will become stable?
How unstable is it now(how many bug it has now)?
Sometime tomorrow [Sunday 8 April].
Jakub Narojczyk wrote:
eklektik napisał(a):
Hello,
I installed Etch recently, with the help of the good people of this
mailing list. Now, it works perfectly, but I hate its look. So I
decided that I completely redesign the desktop. Now the work is
complete and I wrote a short article in my
On Sat, Apr 07, 2007 at 09:55:14 +, Ken Heard wrote:
The system tray on the KDE panel does not display icons for some of the
applications I designate in the KDE menu editor to be displayed there. For
instance, I want Kjots and Knotes icons to be in the system tray and so
indicated
Hello!
ntfs-3g was delete from Etch. [1]
Is there any other way (true way) to work with NTFS (write) in
Debian Etch?
Or now we can't work with NTFS at all? (Of course, i know about
experimental, unstable -- but it's not a true way, isn't it?)
[1]
On Fri, Apr 06, 2007 at 18:38:30 -0700, L.V.Gandhi wrote:
I have dual booting sony vaio laptop booting both vista and etch. System
time ie bios time is shown by vista. But etch shows 7 hrs less. I am in PDT.
Both linux and windows are configured to PDT time zone. In rcS, utc=no is
there.
Andrew M.A. Cater wrote:
On Sat, Apr 07, 2007 at 02:45:56AM -0700, Li Wei wrote:
it's long overdue,
No it's not - it's been there for years - it's just that it's been
labelled as testing :)
when etch will become stable?
How unstable is it now(how many bug it has now)?
Sometime
On Sat, Apr 07, 2007 at 11:35:11 +0530, Masatran, R. Deepak wrote:
This NTLMAPS makes a config error due to which Aptitude complains everytime
I run it. I configured NTLMAPS manually; how can I inform Aptitude that its
configuration was successful?
Are you sure that you configured the package
Andrew Malcolmson [EMAIL PROTECTED] wrote:
[snip]
I've found the biggest challenge in settting up fast moving features
like Xen on Debian is finding *current* documentation. A Debian Wiki
package page would I think get the attention needed to achieve this.
I think this is a great idea and I
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sat, Apr 07, 2007 at 02:45:56AM -0700, Li Wei wrote:
it's long overdue,
when etch will become stable?
How unstable is it now(how many bug it has now)?
Very very soon, but you can install it now if you wish. It's stable
enough for a mission
andy wrote:
Hi folks
Just a quick question: aside from Emacs, is there a Common Lisp IDE
for Debian Etch? Ideally, I had something in mind like the Dr Scheme
IDE (although not with the different language levels and pedagogic set
up) or Python's Idle, something with a text window and an
Michael Pobega [EMAIL PROTECTED] wrote:
You'll lose the permission bits and owner/group, etc. (Maybe even
filename case, but I'm not sure). Use tar if all you have is
fat32.
Note too that FAT32 maximum file size is 4GB.
Also might want to note that you WILL lose filename
* Michael Pobega [EMAIL PROTECTED] [2007 Apr 07 08:45 -0500]:
On Sat, Apr 07, 2007 at 02:45:56AM -0700, Li Wei wrote:
it's long overdue,
when etch will become stable?
How unstable is it now(how many bug it has now)?
I've been using Etch on my home computer and I really have had much
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sat, Apr 07, 2007 at 02:54:47PM +0300, Andrei Popescu wrote:
Andrew Malcolmson [EMAIL PROTECTED] wrote:
[snip]
I've found the biggest challenge in settting up fast moving features
like Xen on Debian is finding *current* documentation. A
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sat, Apr 07, 2007 at 02:54:47PM +0300, Andrei Popescu wrote:
Andrew Malcolmson [EMAIL PROTECTED] wrote:
[snip]
I've found the biggest challenge in settting up fast moving features
like Xen on Debian is finding *current* documentation. A
Joe Hart [EMAIL PROTECTED] wrote:
Just because distributions default to something doesn't mean that
other things don't work on them. The beauty of Debian is that almost
everything is available in the repositories. You can use whatever you
feel most comfortable with. The only way you will
On Sat, 2007-04-07 at 15:44 +0300, Micha Feigin wrote:
I am trying to compile ImageMagick from source (trying to cross compile it
actually with mingw, but I have the same problem with native compilation).
Configure runs file, but that when I try to do make I get the error:
configuring
1 - 100 of 221 matches
Mail list logo