Geoffroy Youri B. a écrit :
Thierry Leurent a écrit :
Bonjour,
Bonsoir,
Je voudrais utiliser l'accéleration 3D et tout ce qui va bien pour booster
mon affiche. Mais je voudrais rester avec les drivers libres.
Donc ma question est ...
Quel est le niveau de stabilité et de performance des
Bonjour,
J'ai un modem externe olitec v90 (bas débit (hé oui, il y a encore des
coin comme ça) branché sur le port série), le matos semble être bien
reconnu par ma bécane avec les paquets pppconfig, wvdial, gnome-ppp.
lorsque je demande à gnome-ppp de me connecter, j'entendu un bruit dans
le
m.jem wrote:
BLACKLISTED
J'ai fait quelques recherches mais rien de concluant...
Un tuyau, un coup de pouce, une solution sont les biens venus. merci.
Débrancher et rebrancher l'alim du modem : le numéro n'a pas été joint
avec succès plusieurs fois de suite, et est tombé en « liste noire
Le samedi 02 août 2008 19:02, m.jem a écrit :
Bonjour,
Bonjour,
Un tuyau, un coup de pouce, une solution sont les biens venus. merci.
Tu peux vérifier que le modem est actif à la réception :
# cat /dev/ttyS0
Depuis un autre fax, composer le numéro téléphonique de ton modem. Les
lignes
Salut à tous.
J'ai un serveur OpenVPN qui marche,
et un serveur SAMBA qui marche parfaitement en locale.
En revanche, quand je me connecte de l'extérieur (donc depuis le vpn),
et que j'accède au partage SAMBA, c'est horriblement lent.
En ce qui concerne le VPN, tout est encapsulé sous UDP,
El vie, 01-08-2008 a las 11:08 -0300, Jose Julian Buda escribió:
La ip de eth1 en server 1 cual es?mascara?
La ip de eth0 en server 2 cual es?mascara ?
La ip de eth1 en server 2 cual es?mascara?
Si la ip como decis de eth1 en server 1 es 192.168.0.1 no hay forma que se
comuniquen los
Jose Luis Gómez escribió:
Que tal Jose, ANTES QUE NADA DE NADA, Muchas gracias por tomarse el
tiempo de escribirme y por la claridad.
Voy a las citas:
No desesperes hombre, si lo mejor es cuando fallan las cosas, así se
aprende.
OK
Centrémonos ... lo primero, -creo yo- pasa por quitar
Polo Oyarzún escribió:
El vie, 01-08-2008 a las 20:51 -0400, Polo Oyarzún escribió:
Una duda. Al apagar Lenny me sale esto:
gdm[2650]: Glib-CRITICAL:
g_hash_table_lookup_extended: assertion 'hash_table != NULL' failed
gdm[2650]: WARNING: Request for invalid configuration key
Revisa la configuración del gdm, en la parte de xdmcp a ver si está bien
formada la línea.
--
Al principio, el Hombre creó a Dios; y lo creó a su imagen y semejanza.
Y el Hombre dio a Dios multitud de nombres, y el poder de que fuera el Señor
de toda la tierra cuando al Hombre le conviniere.
Polo Oyarzún escribió:
El vie, 01-08-2008 a las 20:51 -0400, Polo Oyarzún escribió:
Una duda. Al apagar Lenny me sale esto:
gdm[2650]: Glib-CRITICAL:
g_hash_table_lookup_extended: assertion 'hash_table != NULL' failed
gdm[2650]: WARNING: Request for invalid configuration key
Tengo 512 megas de ram y al parecer tratando de configurar VirtualBox
había instalado el kernel 2.6.25-2 bigmem. Iniciaba con ese por defecto.
Posteriormente dejé el 2.6.25-2 a secas. Mi pc tiene 512 megas de ram.
Mi inquietud es por qué me iniciaba con el bigmem por defecto y andaba
bien si
El sáb, 02-08-2008 a las 18:38 +0200, nx escribió:
Polo Oyarzún escribió:
El vie, 01-08-2008 a las 20:51 -0400, Polo Oyarzún escribió:
Una duda. Al apagar Lenny me sale esto:
gdm[2650]: Glib-CRITICAL:
g_hash_table_lookup_extended: assertion 'hash_table != NULL' failed
Antes de nada, un saludito a la lista.
Hace poco adquirí una kurobox[1] y quiero montar en ella un pequeño
servidor de usuarios y de ficheros
(LDAP+NFS y si tengo tiempo quizás monte samba). El caso es que he
empezado por LDAP y,
antes de probar con un cliente, quiero hacer el propio servidor
El día 2 de agosto de 2008 11:31, Polo Oyarzún [EMAIL PROTECTED] escribió:
El sáb, 02-08-2008 a las 18:38 +0200, nx escribió:
Polo Oyarzún escribió:
El vie, 01-08-2008 a las 20:51 -0400, Polo Oyarzún escribió:
Una duda. Al apagar Lenny me sale esto:
gdm[2650]: Glib-CRITICAL:
El Saturday 02 August 2008 14:35:53 nx escribió:
!DOCTYPE html PUBLIC -//W3C//DTD HTML 4.01 Transitional//EN
html
head
meta content=text/html;charset=UTF-8 http-equiv=Content-Type
title/title
/head
body bgcolor=#ff text=#00
Polo Oyarzún escribió:
blockquote cite=mid:[EMAIL
Sabiendo pues que el problema se debe reducir a una tontería, hace más
de un mes que estoy intentando que un script que sé que funciona corra
correctamente con cron.
Cansado de esto no me queda otra opción más que consultarles a ver si
a alguien se le ocurre cual puede ser el problema.
El script
Red Global de Amigos Networkers: Red Global de Amigos Networkers
Floriberto has invited you to join Red Global de Amigos Networkers
BIENVENIDOS [EMAIL PROTECTED]
Check out Red Global de Amigos Networkers:
http://redglobaldeamigosnetworkers.ning.com/?xgi=4PX4qXp
If your
Aupa:
Como nadie postea sobre el acontecimiento, lo hago yo.
Mas cerca de la liberación de Lenny
Mas info:
http://lists.debian.org/debian-devel-announce/2008/07/msg7.html
Aunque se liberará sin kde4 :( va a mis servers les da igual, juas, juas.
Un saludo
BasaBuru
--
To UNSUBSCRIBE,
Hola.
Hay un servidor que sirve de gateway a Internet para una red interna.
He estado buscando algún programa para poder cerrar o abrir la
conexión de las máquinas según la dirección IP. Aún no he tenido
éxito. El servidor es un debian estable. Si alguien me puede dar
alguna recomendación se lo
Marcos Delgado escreveu:
Hola.
Hay un servidor que sirve de gateway a Internet para una red interna.
He estado buscando algún programa para poder cerrar o abrir la
conexión de las máquinas según la dirección IP. Aún no he tenido
éxito. El servidor es un debian estable. Si alguien me puede dar
Carlos Miranda escreveu:
2008/8/1 Juan Asensio Sánchez [EMAIL PROTECTED]:
Hola
Gracias por la respuesta. Eso ya lo he hecho, pero cuando accedo a
http://servidor/~usuario, me da un 403 forbidden, y en los logs del apache
un access denied, ya que los directorios de usuario (y por ende, los
vaya por fin.. a ver si la empiezan a arreglar bien que yo tengo problemas
de todo tipo y bien dispersos.
2008/8/2 BasaBuru [EMAIL PROTECTED]:
Aupa:
Como nadie postea sobre el acontecimiento, lo hago yo.
Mas cerca de la liberación de Lenny
Mas info:
o también puedes cambiar los permisos a 770 y meter a www-data en el grupo
correspondiente :P
2008/8/2 Daniel [EMAIL PROTECTED]
vaya por fin.. a ver si la empiezan a arreglar bien que yo tengo problemas
de todo tipo y bien dispersos.
2008/8/2 BasaBuru [EMAIL PROTECTED]:
Aupa:
Como nadie postea sobre el acontecimiento, lo hago yo.
Mas cerca de la liberación de Lenny
Mas info:
Hola Lista
Me gustaria saber que soft para grabacion a demanda puedo usar..
Algo que no este grabando continuamente,que solo comience a grabar cuando el
microfono capte cualquier ruido y se detenga cuando haya silencio..
Estoy usando kubuntu 8.04
Desde ya muy agradecido por cualquier info. al
Y con suExec, ¿se podría hacer algo similar? Es decir, que cuando fuera a
servir las páginas personales, lo hiciera como el usuario propietario de las
páginas?
2008/8/2 Daniel [EMAIL PROTECTED]
o también puedes cambiar los permisos a 770 y meter a www-data en el grupo
correspondiente :P
Yo tengo un iptables, puedo cerrar el FORWARD (para salir a internet
usualmente) o el INPUT para que entren a el servidor por ejemplo a un
servicio samba.
--
Al principio, el Hombre creó a Dios; y lo creó a su imagen y semejanza.
Y el Hombre dio a Dios multitud de nombres, y el poder de que
2008/8/2 Marcos Delgado [EMAIL PROTECTED]:
Hola.
Hay un servidor que sirve de gateway a Internet para una red interna.
He estado buscando algún programa para poder cerrar o abrir la
conexión de las máquinas según la dirección IP. Aún no he tenido
éxito. El servidor es un debian estable. Si
Iae...Joiah!! To mandando as fotos que agente tirou... lembra?? r
Nao tava achando o cabo da maquina, mas ta ai.
Ah, aproveitei e fiz uma apresentacao delas, hehe, ficou legal.
Da uma olhada ai e depois me fala o que achou. ;*
Ahh, to mandando desse email de uma amiga minha, to na
El sáb, 02-08-2008 a las 11:10 -0400, Polo Oyarzún escribió:
Tengo 512 megas de ram y al parecer tratando de configurar VirtualBox
había instalado el kernel 2.6.25-2 bigmem. Iniciaba con ese por defecto.
Posteriormente dejé el 2.6.25-2 a secas. Mi pc tiene 512 megas de ram.
Mi inquietud es por
El sáb, 02-08-2008 a las 13:58 -0300, [EMAIL PROTECTED] escribió:
Sabiendo pues que el problema se debe reducir a una tontería, hace más
de un mes que estoy intentando que un script que sé que funciona corra
correctamente con cron.
Cansado de esto no me queda otra opción más que consultarles a
El sáb, 02-08-2008 a las 18:02 -0300, Karlos escribió:
Hola Lista
Me gustaria saber que soft para grabacion a demanda puedo usar..
Algo que no este grabando continuamente,que solo comience a grabar cuando el
microfono capte cualquier ruido y se detenga cuando haya silencio..
Estoy usando
El Saturday 02 August 2008 19:51:28 angel escribió:
El sáb, 02-08-2008 a las 18:02 -0300, Karlos escribió:
Hola Lista
Me gustaria saber que soft para grabacion a demanda puedo usar..
Algo que no este grabando continuamente,que solo comience a grabar cuando
el microfono capte cualquier
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 01-08-2008 11:31, Arthur Furlan wrote:
Olá,
Estou usando o debian-cd para criar um CD customizado do Debian com a
versão base e mais dois pacotes. Porém, um desses pacotes é xserver-xorg
que possui outras dependências.
Como posso fazer
bom dia pessoal,
Estando conectado a internet por algum tempo perde a rota
#route
Destino RoteadorMáscaraGen.Opções Métrica Ref Uso Iface
192.168.7.0 * 255.255.255.0 U 0 00 eth1
localnet* 255.0.0.0 U 0
2008/7/29 Bruno Faiçal escreveu:
Bem, estou com um pequeno problema, preciso acessar um pendriver, no entanto
ele não é atribuído a nenhum dispositivo de bloco...
quando dou o comando dmesg, ele não mostra o dispositivo de bloco que ele
foi atribuido.
Talvez o controlador USB não esteja
2008/7/29 Fernando Mariano escreveu:
Estou precisando iniciar uns serviços em um servidor aqui... por exemplo:
/etc/rc5.d/S90primeiro
/etc/rc5.d/S91segundo
/etc/rc5.d/S92terceiro
só que o segundo serviço (script) só deve começar a ser executado depois que
o primeiro terminar, e o terceiro
2008/7/30 Rafael Teixeira Duarte escreveu:
Só pra registrar, tenho o mesmo problema, acho que é um problema
geral, já procurei bastante coisa, e testei em várias (no mínimo umas
4 ou 5) maquinas diferentes. Até o momento sem solução.
Eu também encontrei esse problema em duas máquinas com
Olá lista,
Estou instalando um servidor Intel com uma placa mãe S5000VSASATA, optei pela
arquitetura ia64, mais não estou conseguindo bootar a maquina pelo CD.
Configurei o setup para iniciar pelo shell EFI, no prompt de comando estou
usando fs0: , ai entro no CD e então uso elilo, tenho a
2008/8/2 Gustavo Goulart [EMAIL PROTECTED]:
Olá lista,
Olá
Estou instalando um servidor Intel com uma placa mãe S5000VSASATA, optei
pela arquitetura ia64, mais não estou conseguindo bootar a maquina pelo CD.
Pelo que vi no site da Intel, essa placa mãe e para processadores Xeon
(EM64T) e
Carlucio Lopes escreveu:
bom dia pessoal,
Estando conectado a internet por algum tempo perde a rota
#route
Destino RoteadorMáscaraGen.Opções Métrica Ref Uso Iface
192.168.7.0 * 255.255.255.0 U 0 00 eth1
localnet*
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Felipe Augusto van de Wiel (faw) wrote:
On 01-08-2008 11:31, Arthur Furlan wrote:
Olá,
Estou usando o debian-cd para criar um CD customizado do Debian com a
versão base e mais dois pacotes. Porém, um desses pacotes é xserver-xorg
que possui
Pessoal, me desculpem, acho que não fui muito claro.
A minha controladora e as portas USB estão perfeitas...
Sei como são reconhecidas.
Mas o meu problema é que, quando coloco o pen na porta USB, ele não me diz
em qual arquivo de bloco (sda, hda, sdb, hdb, ... ) ele foi atribuído, nem
mesmo com
2008/8/2 Bruno Faiçal [EMAIL PROTECTED]:
Pessoal, me desculpem, acho que não fui muito claro.
A minha controladora e as portas USB estão perfeitas...
Sei como são reconhecidas.
Mas o meu problema é que, quando coloco o pen na porta USB, ele não me diz
em qual arquivo de bloco (sda, hda,
Caros Amigos
Tive um servidor debian que perdeu o sistema ext3 raid 1.
A minha duvida 'e se devo usar raid na particao de boot (grub) ou usar
somente uma particao.
Particao /boot (100MB) COM OU SEM RAID1
Particao / RAID 1
swap SEM RAID
Grato
Greco
--
To
2008/8/2 Arthur Furlan [EMAIL PROTECTED]
'aptitude install -d xserver-xorg' resolve?
Resolve em partes... Na verdade eu cheguei a testar essa opção, mas como eu
já tenho esse pacote instalado o aptitude nem chega a fazer download de
nada.
Então:
aptitude *reinstall* -d xserver-xorg
merhaba
makine sıkıntısından dolayı 2003 üzerine vmware ile bi firewall kurmayı
düşünüyorum.
1. yerel ağdaki x,y,z makineleri nete çıksın.
2. a,b,c sadece email alıp gönderebilsin.
3. d,e,f hiç bi yere bağlanamasın.
şeklinde kurallar tanımlayabileceğim. bi sistem kurabilirmyiim.
önerileriniz için
Merhaba,
vmware ile kurarken lütfen bridge ethernet mode yerine kurduğunuz sanal
linuxun kendi ip adresine sahip olmasına dikkat ediniz.
Ayrıca iptables ile fw-builder kullanarak bu istediklerini grafiksel
olarak objeler ile rahatça yapabilirsiniz.
Aslında bu kadar küçük bir network için kural
Bigger, harder, longer lasting http://xb.allhipguide.eu
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Friday 01 August 2008 21:26, Ansgar Burchardt wrote:
Hi,
I'm using a RaLink RT2500 (PCI) wireless NIC. It works without problems
with a 2.6.20.1 kernel and the rt2500 drivers.
I did try to update to the Debian 2.6.25 kernel, but there the WLAN
connection makes problems: Sometimes the
So far as I can tell, the firewall package is only installing itself after
the network has already come up. From what reading I've done, this is the
wrong order. How can I correct that order after the package has been
installed so arno-iptables-firewall runs just before the network
Redirecting to list
Sudev Barar wrote:
2008/7/30 Wackojacko [EMAIL PROTECTED]:
I was refering to the coin cell that some motherboards have for keeping bios
settings between reboots.
The OP mentioned that removing the BIOS battery for a few minutes helps the
PC start so maybe it just gives the
On 01/08/08 22:04, Michal R. Hoffmann wrote:
On 30/07/08 22:15, Florian Kulzer wrote:
On Tue, Jul 29, 2008 at 00:17:35 +0100, Michal R. Hoffmann wrote:
[cut]
I agree with you that it should work like that. Maybe you have to try a
simpler configuration now, and then you can gradually add all
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Mumia W.. wrote:
On 08/01/2008 12:17 PM, Rick Thomas wrote:
[...]
As you can see, the doc package installed OK, but the server
package needs a later version of some basic C libraries.
I'd rather not upgrade the Etch machine to Lenny right now.
Michal R. Hoffmann wrote:
On 01/08/08 22:04, Michal R. Hoffmann wrote:
On 30/07/08 22:15, Florian Kulzer wrote:
[cut]
Section InputDevice
IdentifierGeneric Keyboard
Driverkbd
OptionXkbRulesxorg
OptionXkbModelpc105
OptionXkbLayout
Hi,
Shachar Or [EMAIL PROTECTED] writes:
On Friday 01 August 2008 21:26, Ansgar Burchardt wrote:
I admit having sometimes connection problems running the older kernel as
well, but the network works again after a few moments (and without any
manual intervention). The link quality given by
Hi,
I downloaded the latest d-i:
http://cdimage.debian.org/cdimage/daily-builds/sid_d-i/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso
and used it to install a lenny system but only with what was in the iso.
Ran into the following:
I don't want lenny, I want sid and have a sid local
On Saturday 02 August 2008 06:20, Hugo Vanwoerkom wrote:
Hi,
I downloaded the latest d-i:
http://cdimage.debian.org/cdimage/daily-builds/sid_d-i/arch-latest/i386/iso
-cd/debian-testing-i386-netinst.iso
and used it to install a lenny system but only with what was in the iso.
Ran into the
Shachar Or wrote:
On Saturday 02 August 2008 06:20, Hugo Vanwoerkom wrote:
Hi,
I downloaded the latest d-i:
http://cdimage.debian.org/cdimage/daily-builds/sid_d-i/arch-latest/i386/iso
-cd/debian-testing-i386-netinst.iso
and used it to install a lenny system but only with what was in the iso.
Hi,
Robin [EMAIL PROTECTED] writes:
2008/8/1 Ansgar Burchardt [EMAIL PROTECTED]:
[problems with RT2500 and newer kernel version]
I'm not sure if you mean the rt2500 drivers as in the debian
packages. Also I have a rt73 so what follows may not apply.
I think the rt* series have been
David Witbrodt wrote:
- Forwarded Message
From: David Witbrodt [EMAIL PROTECTED]
To: Hugo Vanwoerkom [EMAIL PROTECTED]
Sent: Friday, August 1, 2008 10:34:51 PM
Subject: Re: [!] 2.6.26 + vga=791
But I did something interesting: I recompiled 2.6.26-1-686 but changed
to .config
When I plug my umts usb modem, lsusb produces the following output:
$ lsusb
Bus 003 Device 001: ID :
Bus 002 Device 001: ID :
Bus 001 Device 004: ID 05c6:3100 Qualcomm, Inc. CDMA Wireless Modem/Phone
Bus 001 Device 001: ID :
. Now, I want the device to be driven my
Wackojacko wrote:
Redirecting to list
Sudev Barar wrote:
2008/7/30 Wackojacko [EMAIL PROTECTED]:
I was refering to the coin cell that some motherboards have for
keeping bios
settings between reboots.
The OP mentioned that removing the BIOS battery for a few minutes
helps the
PC start so
On Fri Aug 01 2008 @ 10:20, Hugo Vanwoerkom wrote:
Hi,
I downloaded the latest d-i:
http://cdimage.debian.org/cdimage/daily-builds/sid_d-i/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso
^^^
My recollection is that you can choose to install Sid directly
On Saturday 02 August 2008 18:23, Telemachus wrote:
On Fri Aug 01 2008 @ 10:20, Hugo Vanwoerkom wrote:
Hi,
I downloaded the latest d-i:
http://cdimage.debian.org/cdimage/daily-builds/sid_d-i/arch-latest/i386/i
so-cd/debian-testing-i386-netinst.iso
^^^
My
From: David Witbrodt [EMAIL PROTECTED]
To: Hugo Vanwoerkom [EMAIL PROTECTED]
Sent: Saturday, August 2, 2008 11:41:47 AM
Subject: Re: [!] 2.6.26 + vga=791
David Witbrodt wrote:
So now I have to go item by item and investigate the diff in .config
files, which is vast because with
Hi:
I'm meeting a problem on xfce4 panel after I did a full package upgrade (no
dist-upgrade), debian lenny/sid 2.6.24-1, xfce4.4-2, xfce4-panel 4.4.-2-6.
My default top panel with the task list, workspaces was becoming bigger
after the upgrade, and I couldn't get it back to normal by modifying
Michael Madden [EMAIL PROTECTED]:
Is anyone aware of a project similar to Rocks Clusters
(http://www.rocksclusters.org/) that uses Debian as it's base? Rocks is
xCAT can do multiple versions of Redhat, so it shouldn't be all that
difficult to slot in Debian. There's a good IBM TechWorks
On Saturday 02 August 2008 19:54, Michael Yang wrote:
Hi:
I'm meeting a problem on xfce4 panel after I did a full package upgrade (no
dist-upgrade), debian lenny/sid 2.6.24-1, xfce4.4-2, xfce4-panel 4.4.-2-6.
My default top panel with the task list, workspaces was becoming bigger
after the
On 08/02/08 09:06, Hugo Vanwoerkom wrote:
[snip]
Good clue! But I am no closer and consider giving up: it would only be
useful if I found a kernel parameter for the cmdline to avoid being
without framebuffers.
Any other fix entails recompiling the Debian Kernel, e.g. in order to
install uvesfb
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hello Debian Team -
I'm trying to install Deluge on my Ubuntu 8.04, i86. I don't understand
how to add Deluge to my sources.list. I was hoping you can send me
instructions on how to. Thanks.
From,
David
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
On 08/02/08 13:02, David Rodriguez wrote:
Hello Debian Team -
I'm trying to install Deluge on my Ubuntu 8.04, i86. I don't understand
how to add Deluge to my sources.list. I was hoping you can send me
instructions on how to. Thanks.
Deluge the BitTorrent client? It's already in the Debian
I couldn't find the ~/.xfce4, Is it the one xfce4-session.rc file under
/etc/xdg/xfce4-session?
Cleaning up all the old settings is the last step I want to do. Hope there
can be another way to fix this problem.
Thanks again
M.
On Sat, Aug 2, 2008 at 1:18 PM, Shachar Or [EMAIL PROTECTED] wrote:
Has anyone seen this:
VLC media player 0.8.6h Janus
libdvdnav: Using dvdnav version 4.1.2 from http://dvd.sf.net
libdvdnav: DVD Title: SIN_CITY
libdvdnav: DVD Serial Number: 32d89b22
libdvdnav: DVD Title (Alternative):
libdvdnav: Unable to find map file '/home/mathieu/.dvdnav/SIN_CITY.map'
I sometimes have a hard time figuring out why apt keeps certain packages back.
For example the other day during an apt-get upgrade it was keeping back
openoffice (and all the OO componant packages). It was not requiring any
packages to be removed, it wasn't causing any major packages to be
BTW I did install regionset and set it to 1 (obviously):
$ sudo regionset
~
regionset version 0.1 -- reads/sets region code on DVD drives
Current Region Code settings:
RPC Phase: II
type: NONE
vendor resets available: 4
user controlled changes resets available: 5
drive plays discs from
JW wrote:
I sometimes have a hard time figuring out why apt keeps certain packages back.
For example the other day during an apt-get upgrade it was keeping back
openoffice (and all the OO componant packages). It was not requiring any
packages to be removed, it wasn't causing any major packages
On 08/02/08 14:09, JW wrote:
I sometimes have a hard time figuring out why apt keeps certain packages back.
For example the other day during an apt-get upgrade it was keeping back
openoffice (and all the OO componant packages). It was not requiring any
packages to be removed, it wasn't causing
today i have refresh my debian etch system and now the serial port is no
longer working i get no data from the port, maybe the problem is comming
from the libc6 because this one was also updated.
when i boot with knoppix everything is working the hardware is ok.
kernel 2.6.18-6-686
libc6
Hello, all:
A while back, there was some discussion here about Google Earth not
working on amd64 systems. I decided to take another whack at it
today, using make-googleearth-package. I had it download the latest
GoogleEarth.bin, but then, trying to make the package, it threw lots
of warnings at
Hi,
I tried doing an nmap scan on myself the other day and found that tcp
port 113 was open. Nmap listed the service as ident. I am trying to
remove this service since I don't think I need it, but I can't figure
out how. I removed the package pidentd, after which nmap reported the
port was
Hi,
Jimmy Wu [EMAIL PROTECTED] writes:
I tried doing an nmap scan on myself the other day and found that tcp
port 113 was open. Nmap listed the service as ident. I am trying to
remove this service since I don't think I need it, but I can't figure
out how. I removed the package pidentd,
On 08/02/08 17:43, Ansgar Burchardt wrote:
Hi,
Jimmy Wu [EMAIL PROTECTED] writes:
I tried doing an nmap scan on myself the other day and found that tcp
port 113 was open. Nmap listed the service as ident. I am trying to
remove this service since I don't think I need it, but I can't figure
On Sun, 3 Aug 2008, JW engaged keyboard and shared this with us all:
--} I sometimes have a hard time figuring out why apt keeps certain packages
back. --} For example the other day during an apt-get upgrade it was
keeping back --} openoffice (and all the OO componant packages). It was
not
Original Message
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [OT?]Re: pc doesn't start
Date: Sat, 02 Aug 2008 09:59:24 -0500
Wackojacko wrote:
Redirecting to list
Sudev Barar wrote:
2008/7/30 Wackojacko [EMAIL PROTECTED]:
I was refering to the coin cell that some
[EMAIL PROTECTED] wrote:
HTH
Wackojacko
Those coin batteries are typically 2025's or 2032's, and are quite
common. In the US, Wal*Mart carries them. Elsewhere, try the local
Wal*Mart equivalent, e.g. Tesco, or Radio Shack, or the local
computer
parts store should have some. Some are
On Sat, 2008-08-02 at 18:17 -0500, Ron Johnson wrote:
On 08/02/08 17:43, Ansgar Burchardt wrote:
Hi,
Jimmy Wu [EMAIL PROTECTED] writes:
I tried doing an nmap scan on myself the other day and found that tcp
port 113 was open. Nmap listed the service as ident. I am trying to
On Sat, Aug 2, 2008 at 6:43 PM, Ansgar Burchardt [EMAIL PROTECTED] wrote:
Hi,
Jimmy Wu [EMAIL PROTECTED] writes:
I tried doing an nmap scan on myself the other day and found that tcp
port 113 was open. Nmap listed the service as ident. I am trying to
remove this service since I don't
Alex others,
My network is illustrated here now.
http://carnot.pathology.ubc.ca/Network.jpg
Forwarding is always on.
dalton:~# cat /proc/sys/net/ipv4/ip_forward
1
as ... routing tables commands have a look at man ip
OK; I've read route.man and ip.man.
as for a machine at local lan a (say
I am packaging an application that needs to create a database. By default it
uses mysql. What is the debian way of letting a package create a database and
database user? Would I use /etc/mysql/debian.cnf?
I may have missed it in the documentation. I have been reading various
tutorials, the
Nigel Henry, Thomas Preud'homme others,
Thanks for all the attention to this problem.
nh I'd suggest adding a line to /etc/modprobe.d/alsa-base, as below.
install snd-hda-intel /bin/true
Very promising but, alas, it fails. alsaconf
is still required.
tp I just blacklist via82 module. I
On 08/02/08 21:12, Adam Wakerhauser wrote:
I am packaging an application that needs to create a database. By
default it uses mysql. What is the debian way of letting a package
create a database and database user? Would I use /etc/mysql/debian.cnf?
I may have missed it in the documentation. I
Hello Dear
I am tring to install a wiki software on Debian (server) on my network.
But I dont know which wiki software is better for my project (it is not a big
project) and how i can install it on debian server.
It it is possible for you please help me about both (wiki software and Debian)
On Sat August 2 2008 18:31:40 [EMAIL PROTECTED] wrote:
My network is illustrated here now.
http://carnot.pathology.ubc.ca/Network.jpg
Forwarding is always on.
dalton:~# cat /proc/sys/net/ipv4/ip_forward
1
snip
Even without such a command this is the routing
table on Dalton.
snipped
On 08/02/2008 11:34 PM, sadeq zabihi wrote:
Hello Dear
I am tring to install a wiki software on Debian (server) on my network.
But I dont know which wiki software is better for my project (it is not a big
project) and how i can install it on debian server.
It it is possible for you please
97 matches
Mail list logo
