On Wed,17.Jun.09, 13:26:44, Andrei Popescu wrote:
I'm struggling for a while now to get vdpau working with mplayer (from
debian-multimedia and upstream svn), but it still doesn't work. XBMC is
not available and mythtv seems to be a monster.
^ in Debian
Regards,
Andrei
--
If
Hi,
I'm trying to figure out how to use exim4 for sending/receiving mails in
console mode.
Any recommendation for good instructions/how-tos ?
Kind regards
On 17 Jun 2009, Martin Fluch wrote:
Hello!
I'm trying to configure an ATI Technologies M52 (Mobility Radeon X1300)
graphics card with 64MB of RAM on my T60. I have problem with getting
the acceleration set up correctly (glxgears runs with about 110fps). I
notice the following error messsage
2009/6/17 J.Hwan.Kim frog1...@gmail.com
Hi, everyone
I'm using gcc-avr in etch.
If I upgrade my debian to lenny and wish to use gcc-avr etch version not
lenny version,
how can I install gcc-avr and avr other package of etch in lenny
environment?
maybe apt pinnning can be of use
On Wed, Jun 17, 2009 at 12:10:17PM +0100, Yuriy Kuznetsov wrote:
Hi,
I'm trying to figure out how to use exim4 for sending/receiving mails in
console mode.
Any recommendation for good instructions/how-tos ?
I normally use mutt .
Though the simple mail will also do:
echo 'message body' |
On Wed, Jun 17, 2009 at 11:26 +0100, Martin Fluch wrote:
I'm trying to configure an ATI Technologies M52 (Mobility Radeon X1300)
graphics card with 64MB of RAM on my T60. I have problem with getting
the acceleration set up correctly (glxgears runs with about 110fps). I
notice the following
On Wed,17.Jun.09, 14:30:41, Wolodja Wentland wrote:
(EE) RADEONHD(0): [dri] CP_INIT failed
(EE) RADEONHD(0): RHDDRIFinishScreenInit: RHDDRIKernelInit Failed.
I had that problem before and fixed it by installing 'firmware-linux', which
contains (among others) the firmwares for the
On Wed, Jun 17, 2009 at 16:07 +0300, Andrei Popescu wrote:
I really wonder why this package is not a dependency of the
xserver-xorg-radeon{,hd} packages. If the installation of that package
solved that problem for you I will file a bug against the
xserver-xorg-video-* packages that
On Wed, Jun 17, 2009 at 07:47:20AM +0200, Sven Joachim svenj...@gmx.de was
heard to say:
On 2009-06-17 05:59 +0200, Daniel Burrows wrote:
On Tue, Jun 16, 2009 at 10:59:03PM +0200, Sven Joachim svenj...@gmx.de
was heard to say:
On 2009-06-16 21:44 +0200, Jason Filippou wrote:
Okay, this is kind of a weird question, but it came up at work.
I'm a complete exim newbie (I've never configured it before, beyond
'dpkg-reconfigure exim4-config'), but a project came up where the
manager wants to use exim in a weird way. Basically, this needs to
happen:
1) Exim receives a
On Qua, 17 Jun 2009, David wrote:
Okay, this is kind of a weird question, but it came up at work.
I'm a complete exim newbie (I've never configured it before, beyond
'dpkg-reconfigure exim4-config'), but a project came up where the
manager wants to use exim in a weird way. Basically, this needs
On Wed, Jun 17, 2009 at 12:10:17PM +0100, Yuriy Kuznetsov wrote:
I'm trying to figure out how to use exim4 for sending/receiving mails in
console mode.
Any recommendation for good instructions/how-tos ?
I think that the only way to dirctly tell exim4 to send mail is to speak
SMTP to it,
On Wed, Jun 17, 2009 at 3:34 PM, Eduardo M
KALINOWSKIedua...@kalinowski.com.br wrote:
I'd strongly recommend against creating system users for unknown accounts.
With the amount of spam we get today, you'd be flooded with new accounts.
It would probably be better to create virtual users,
On Wed, Jun 17, 2009 at 03:26:41PM +0200, David wrote:
Okay, this is kind of a weird question, but it came up at work.
I'm a complete exim newbie (I've never configured it before, beyond
'dpkg-reconfigure exim4-config'), but a project came up where the
manager wants to use exim in a weird
On Qua, 17 Jun 2009, David wrote:
Could you point me to docs where I can read more about virtual users?
Most of the Google results are for Virtual Domains, or for Exim in
combination with other software.
Exim doesn't really make a distinction between real users and local
users. It can check
Suno Ano, Tue Jun 16 2009 12:37:28 GMT+0200 (CEST):
Peter You can use svk instead of svn
I do not see how this solves the metadata issue if you use a version
control system directly without the smartness etckeeper brings to the
table e.g. by using its .gitignore settings.
svk is an attempt to
I do not see how this solves the metadata issue if you use a version
control system directly without the smartness etckeeper brings to the
table e.g. by using its .gitignore settings.
svk is an attempt to inject the notion of being a decentralized scm into
a centralized one (which svn
On Wed, Jun 17, 2009 at 3:53 PM, Douglas A. Tuttydtu...@vianet.ca wrote:
Since this mail is coming from a trusted server, why not have a script
on that server first check (via ssh) if the user exists? Or, have it
send the mail blindly. If the user doesn't exist, exim bounces it back.
the
hi,
how to execute an external program from java.
the equivalent to the system C command : system( thecommand ), where
command is any unix command or program like ls, gedit or firefox
thanks for help
bela
Doug,
Could you give some commands as examples of sending emails with exim4,
please?
Thanks a lot
On Wed, Jun 17, 2009 at 2:36 PM, Douglas A. Tutty dtu...@vianet.ca wrote:
On Wed, Jun 17, 2009 at 12:10:17PM +0100, Yuriy Kuznetsov wrote:
I'm trying to figure out how to use exim4 for
abdelkader belahcene wrote:
hi,
how to execute an external program from java.
the equivalent to the system C command : system( thecommand ), where
command is any unix command or program like ls, gedit or firefox
thanks for help
bela
You'd probably be better off asking on a java-dev
On Wed Jun 17, 2009 at 16:51:33 +0200, David wrote:
This info is needed, because our software needs to hook into the exim
mail life cycle at various points. Mainly for things like converting
between email and non-email messaging systems. Basically, the idea is
to use exim as the core engine
To activate bluetooth, you need a paperclip (trombone) each time you
want to see it with hcitool scan.
^^
Then hidd --connect $KeyboardBluetooth_ADRR works (tried as root)
After that, I need xmodmap and xev to configure it whith my own
language.
(hard with a broken arm ;)
--
Alexandre
In 18c1e6480906170751s1156138ep8d3002b2528c3...@mail.gmail.com, David
wrote:
On Wed, Jun 17, 2009 at 3:53 PM, Douglas A. Tuttydtu...@vianet.ca wrote:
Since this mail is coming from a trusted server, why not have a script
on that server first check (via ssh) if the user exists? Or, have it
In 3df35b760906170818re166e28x8be9006d7...@mail.gmail.com, Yuriy
Kuznetsov wrote:
Could you give some commands as examples of sending emails with exim4,
please?
Install bsd-mailx.
echo 'Body of the message' | mailx -s 'Subject Line' 'to#1' 'to#2'
OR
printf
In 46688cb90906170748v5acc1dcbh2c616ef948d4b...@mail.gmail.com, abdelkader
belahcene wrote:
how to execute an external program from java.
Look at the documentation for java.lang.Runtime.exec family of functions.
Compare/contrast with the exec* family of SUS C functions.
--
Boyd Stephen Smith
on sid i386
after ./configure
i ran make
and the process stopped by
input.c:95: error: static declaration of ‘input_thread’ follows non-static
declaration
common.h:719: error: previous declaration of ‘input_thread’ was here
make[2]: *** [input.o] Error 1
make[2]: Leaving directory
Thanks for the replies.
I think what I'm going to do next is take a closer look at Qpsmtpd,
since we'll probably need to do a fair amount of non-standard things
on the mail servers, and it sounds like configuring exim to do those
kinds of things could get very complicated.
David.
--
To
2009/6/17 David wizza...@gmail.com
On Wed, Jun 17, 2009 at 3:53 PM, Douglas A. Tuttydtu...@vianet.ca wrote:
Since this mail is coming from a trusted server, why not have a script
on that server first check (via ssh) if the user exists? Or, have it
send the mail blindly. If the user
Thanks a lot to all for your input.
Kind regards,
yuriy
2009/6/17 Umarzuki Mochlis umarz...@gmail.com
on sid i386
after ./configure
i ran make
and the process stopped by
input.c:95: error: static declaration of ‘input_thread’ follows non-static
declaration
common.h:719: error: previous declaration of ‘input_thread’ was here
make[2]: ***
On 2009-06-17 15:23 +0200, Daniel Burrows wrote:
On Wed, Jun 17, 2009 at 07:47:20AM +0200, Sven Joachim svenj...@gmx.de was
heard to say:
On 2009-06-17 05:59 +0200, Daniel Burrows wrote:
On Tue, Jun 16, 2009 at 10:59:03PM +0200, Sven Joachim svenj...@gmx.de
was heard to say:
On
I compiled and an now running the 2.6.30 kernel.
1. Ext3 fs now default to writeback data mode instead of ordered-data. I does
seem quicker. Question is whether this mode is safe? Should I tune2fs back?
Should I use extents along with the writeback data mode?
2. Following new error:
svc:
In 52d26d930906170911q518ebdf6vbac24bfed3cc0...@mail.gmail.com, Umarzuki
Mochlis wrote:
2009/6/17 Umarzuki Mochlis umarz...@gmail.com
input.c:95: error: static declaration of ‘input_thread’ follows
non-static declaration
common.h:719: error: previous declaration of ‘input_thread’ was here
the
On Wed, Jun 17, 2009 at 11:54:12PM +0800, Umarzuki Mochlis wrote:
on sid i386
after ./configure
i ran make
and the process stopped by
input.c:95: error: static declaration of ‘input_thread’ follows non-static
declaration
common.h:719: error: previous declaration of ‘input_thread’ was
Hello Wolodja!
Thanks a lot! This hint helped a lot, now the graphics accelereation
seems to work fine. At least I get now about 770 fps with glxgears, so
the improvement is very much noticeable. (And I noticed that the radeon
driver does perform even better than the radeonhd driver; this is the
Tzafrir Cohen wrote:
On Wed, Jun 17, 2009 at 08:05:20AM +0100, AG wrote:
What is very strange is that the problems are related to playing the
game on this machine. My previous machine played it just fine, and it
isn't the version either as far as I can tell, because I removed the
Peter Metadata = data stored in .svn/ ?
yes, problem is, Subversion does not have one directory i.e. one .svn/
at the root of the project where is stores metadata but it scatters them
all over the place which is very annoying. Git only has one .git/ at the
project root at that is it
Hi,
I run lenny. I upgraded a month or so ago and switched from chroot
based iceweasel to 64bit iceape+icedove. Since then my printing became
sporadic from inside iceape. It would go thought motions but would not
print anything. Attempting to print to ps file produces just basic
header of
Suno Ano, Wed Jun 17 2009 19:07:31 GMT+0200 (CEST):
Peter Metadata = data stored in .svn/ ?
yes, problem is, Subversion does not have one directory i.e. one .svn/
at the root of the project where is stores metadata but it scatters them
all over the place which is very annoying. Git only has
Hello, I am looking for advice with a frustrating little problem:
I am able to fill in PDF forms from the US IRS with either okular or evince (I
am using the testing distribution). However, alphanumerical form data is
invisible. It only displays the value for a particular field when I click in
On Sun, 24 May 2009 12:58:15 +0200, michal krajcirovic wrote:
Hi,
Hello,
I got a little problem, but I can not find a solution.
I have several sections DRBD - /dev/drbd0, /dev/drbd1, /dev/drbd2, etc.
on two arrays. On them I have the heartbeat. Above them is to run NFS.
On Sun, Jun 14, 2009 at 8:28 AM, Chris Jones cjns1...@gmail.com wrote:
On what system did you see it work - and in what application(s)¹…?
Good question. I couldn't answer it immediately, so I've just installed etch
on a spare machine, and gnome-terminal does the trick. Here's screencast of
Welcome to www.tennistips365.com
Have a tour on the site and if you have any questions you are
more than welcome to send me an e-mail.
Free Movie: Learn to play forehand in 48.23 seconds.
(During next week we start exclusive newsletter with technical and
biomechanical tips.)
Regards,
Fredrik
365 wrote:
Welcome to www.tennistips365.com http://www.tennistips365.com
Have a tour on the site and if you have any questions you are
more than welcome to send me an e-mail.
Free Movie: Learn to play forehand in 48.23 seconds.
(During next week we start exclusive newsletter with technical and
I am setting up a cron job to do a daily backup of files on disk. I have
put a call to
the backup program in /etc/cron.daily and it does run daily, but not at
the time that
I would like it to run. The puzzle is that /etc/crontab specifies that
the jobs in /etc/cron.daily should be run starting
[skipping a lot of lines ...]
Paul I leave my computer on overnight just so I can have this job
Paul done, but there are indications in the log that seem, to my
Paul untrained eye, to be anacron restarting cron jobs every morning
Paul --- why? And how does it arrive at 7:35? The
On Wed, 17 Jun 2009 16:29:10 -0400
Tony Baldwin photodha...@gmail.com wrote:
Hello Tony,
There really is an inordinate amount of spam on this list.
Not helped by people quoting back to the list verbatim.
I've never seen so much on a user list.
You should have seen the amount that arrived
On Wed, Jun 17, 2009 at 04:51:33PM +0200, David wrote:
1. Is there a way for external programs to determine immediately when
a mail was just delivered into the mail files?
You can monitor files for changes in timestamps or size, which is
essentially what shells do to notify users of new email.
On Wed, Jun 17, 2009 at 07:23:27PM +0300, David Baron wrote:
1. Ext3 fs now default to writeback data mode instead of ordered-data.
I does seem quicker. Question is whether this mode is safe? Should I
tune2fs back? Should I use extents along with the writeback data mode?
Ordered-data is safer
List policy is clear concerning SPAM. Please take a minute to read the
Debian mailing list policy - http://www.debian.org/MailingLists/
If you'd like to reduce the SPAM you receive via the list, follow the
instructions found as part of that policy -
http://www.debian.org/MailingLists/#ads
In 20090617211453.gq24...@penguin.codegnome.org, Todd A. Jacobs wrote:
On Wed, Jun 17, 2009 at 07:23:27PM +0300, David Baron wrote:
1. Should I use extents along with the writeback data mode?
As for extents, they aren't supported in ext3 anyway. You'd need to
reformat (not upgrade an existing
On Wed, 13 May 2009 12:30:19 +0200
Klistvud quotati...@aliceadsl.fr wrote:
Plz help. Anyone else on this list having the same problem?
Same problem here after upgrade on Sunday. (Debian unstable, amd64)
Problem: Both keyboard and mouse work neither in gdm or in kdm login
screens. After a
On Wed, Jun 17, 2009 at 10:52:18AM -0500, Boyd Stephen Smith Jr. wrote:
In 3df35b760906170818re166e28x8be9006d7...@mail.gmail.com, Yuriy
Kuznetsov wrote:
Could you give some commands as examples of sending emails with exim4,
please?
Install bsd-mailx.
echo 'Body of the message' |
In 20090617215741.ga6...@blitz.hooton, Douglas A. Tutty wrote:
On Wed, Jun 17, 2009 at 10:52:18AM -0500, Boyd Stephen Smith Jr. wrote:
In 3df35b760906170818re166e28x8be9006d7...@mail.gmail.com, Yuriy
Kuznetsov wrote:
Could you give some commands as examples of sending emails with exim4,
On Tue, Jun 16, 2009 at 11:10:17AM -0700, Maria McKinley wrote:
Bob Parnes wrote:
On Mon, Jun 15, 2009 at 01:12:50PM -0700, Maria McKinley wrote:
I have the latest xemacs and auctex in lenny, but when I try C-c C-c,
I get C-c C-c not defined. Any ideas what I did wrong? I suspect
something
Hi All,
I am installing Lenny on a Toshiba Tecra A8. During the software
selection screen by default the options Desktop Environment Laptop
and Standard System are checked.
Usually I just install the base and build from there (on desktops) but
since I'm on a laptop I'm wondering what tools and
On Wed, Jun 17, 2009 at 8:28 PM, j tmark...@gmail.com wrote:
I think it's time for me to have a chat with the gnome-terminal people...
From http://mail.gnome.org/archives/gnome-list/2009-June/msg00037.html
I think you now need to do Ctrl+Shift+u, then the Unicode number, then
then the spacebar.
Hi
I have a syslog line that looks like this
Jun 18 10:35:53 Thu Jun 18 10:42:37 2009 dlink-dir-855 System Log:
Stored configuration to non-volatile memory
notice the double dates stamps and it seems like I should be able to
rectify this with rsyslog, but I am not sure how.
I have had a quick
Install the devscripts-package, change to the source directory of the psb
module and do 'debuild'. It willtell you which -dev package are missing,
install them and repeat. If everything goes well, you should havea debian
package which can be installed with 'dpkg -i xserver-xorg...deb'.
So I
On Wed, Jun 17, 2009 at 7:36 PM, Petrus Validuspetrus.vali...@gmail.com wrote:
Hi All,
I am installing Lenny on a Toshiba Tecra A8. During the software
selection screen by default the options Desktop Environment Laptop
and Standard System are checked.
Usually I just install the base and
2009/6/18 Neal Hogan nealho...@gmail.com:
On Wed, Jun 17, 2009 at 7:36 PM, Petrus Validuspetrus.vali...@gmail.com
wrote:
Hi All,
I am installing Lenny on a Toshiba Tecra A8. During the software
selection screen by default the options Desktop Environment Laptop
and Standard System are
On Wed, 17 Jun 2009, Andrei Popescu wrote:
I really wonder why this package is not a dependency of the
xserver-xorg-radeon{,hd} packages. If the installation of that package
solved
that problem for you I will file a bug against the xserver-xorg-video-*
packages that depend on it.
When I reboot my laptop, my wireless card sometimes gets recognized as eth2.
Other times it gets recognized as wlan0_rename.
Because of this, sometimes I end up with a booted machine with no network.
Using Debian Lenny (stable),
$dmesg | grep -i wireless
[7.493507] iwl3945: Intel(R)
101 - 164 of 164 matches
Mail list logo
