Muntant el disc dur externament he pogut recuperar el fitxer
d'opcions d'arrencada /boot/config-3.2.0-3-amd64 i veig que hi ha una
línia CONFIG_CLOCKSOURCE_WATCHDOG=y
He trobat dos lloc on començar a aprendre sobre watchdog, però crec que
em supera una mica:
On Sunday 11 November 2012 00:26:21 you wrote:
Le 10 novembre 2012 23:37, andre_deb...@numericable.fr a écrit :
On Friday 09 November 2012 14:02:58 Jean-marc Dufour wrote:
/etc/apache2/sites-available et là j'ai 7 fichiers de sites differents
avec comme contenu:
VirtualHost *:80
On Sun, Nov 11, 2012 at 10:37:36AM +0900, Charles Plessy wrote :
Le Sat, Nov 10, 2012 at 08:58:22PM +0100, Aurelien a écrit :
Bref, je ne comprends pas grand-chose, et vus les retours sur le net, je
crois pas être tout seul. Si quelqu'un peut me sortir de cette mauvaise
passe, je suis
Alain Vaugham wrote
Le Sat, 10 Nov 2012 03:05:32 +0100,
Ce n'est pas ses 215kio qui me génaient. C'est que depuis plusieurs
semaines il refusait l'action de supprimer des portions de texte.
Donc je suis passé sur Kate. Maintenant que j'ai investi du temps
sur Kate, je ne vais plus revenir
Le 11 novembre 2012 11:40, andre_deb...@numericable.fr a écrit :
...
Les fichiers du répertoire sites-enabled peuvent être des liens
symboliques pointant vers les fichiers originaux du
répertoire sites-available que l'on créé avec la commande
a2ensite :
a2ensite fichier_config_site virtuel
On Sun, Nov 11, 2012 at 10:37:36AM +0900, Charles Plessy wrote :
Le Sat, Nov 10, 2012 at 08:58:22PM +0100, Aurelien a écrit :
Bref, je ne comprends pas grand-chose, et vus les retours sur le net, je
crois pas être tout seul. Si quelqu'un peut me sortir de cette mauvaise
passe, je suis
Bonjour,
J'ai une debian testing et je voudrais y installer une carte wifi:
# lspci
snip
04:05.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface
J'ai donc suivis les indications de ce site: http://wiki.debian.org/fr/acx .
Après avoir réglé quelque petit soucis, tous
On Sun, 11 Nov 2012 15:35:47 +0100
Zuthos zuthos-nos...@laposte.net wrote:
04:05.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless
Interface
lono wireless extensions.
eth0 no wireless extensions.
Est-ce que les firmwares non-free sont bien installés?
On Sunday 11 November 2012 14:31:29 you wrote:
Le 11 novembre 2012 11:40, andre_deb...@numericable.fr a écrit :
Les fichiers du répertoire sites-enabled peuvent être des liens
symboliques pointant vers les fichiers originaux du
répertoire sites-available que l'on créé avec la commande
Le Sat, 10 Nov 2012 19:11:00 +0100
Gaëtan PERRIER gaetan.perr...@neuf.fr a écrit:
Finalement j'ai réussi en installant blueman et obexftp.
Par contre j'aimerai bien que blueman ne démarre pas automatiquement mais
seulement quand j'en ai besoin. Je n'ai pas trouvé comment désactiver son
On 11/11/2012 12:05 AM, Cosme Domínguez Díaz wrote:
Si quieres volver a GNOME 2 en Debian Testing:
http://mate-desktop.org
Repositorio para Wheezy: http://wiki.mate-desktop.org/download
Si quieres seguir en GNOME 3 sin GNOME Shell (es decir, con el aspecto
de GNOME 2)
On 10/11/2012 15:45, Camaleón wrote:
El Sat, 10 Nov 2012 08:54:40 +0100, Jorge escribió:
Buenos días.
Esta es una duda muy simple, creo.
Tengo Debian Squeeze con apache2 y virtual hosting, en el que trato de
poner certificados a dos dominios diferentes. He leído que sólo puedes
utilizar un
Hola Francisco:
Decías el martes, 06 de noviembre del 2012 a las 10:00
Ok ya entendí todo saludos y muchas gracias aqui estaremos al tanto
de todo
www.lypef-warez.com
Hay que tener en cuenta no hacer topposting, osea no contestar en la
parte superior de el mensaje cuando se contesta a una
El 10/11/12 16:28, Francisco Rafael Del Roio escribió:
El 10/11/12 10:02, manuel escribió:
Es extraño el comportamiento. Instalé el paquete gnome session fallback,
para probar el error, y efectivamente, aparece. Curiosamente, el
navegador web integrado dentro del proyecto gnome, funciona bien
Camaleón wrote:
El Thu, 11 Oct 2012 23:30:53 -0300, Sergio Bessopeanetto escribió:
¿Alguien sabe algo de Camaleon?
Hace ya casi 3 semanas que no se la ve por acá.
Por aquí ando :-)
Tuve unas semanas de trabajo que no pude evitar pero ya vuelvo por estos
lares dando guerra.
Pero no en
El Sat, 10 Nov 2012 13:02:37 +, manuel escribió:
El 10/11/12 17:33, Camaleón escribió:
(...)
Hola. Al referirse a no ser accesible, se refiere más bien a que no
conecta con at-spi2, lo que se necesita para que brinde la
accesibilidad.
(...)
Ah, okay, gracias por la aclaración :-)
El Sun, 11 Nov 2012 08:49:21 -0300, Francisco Rafael Del Roio escribió:
Parece ser que mi sistema me está haciendo una mala jugada. Por alguna
razón, ayer conseguí que iceweasel pudiera leerse, como lo comentaba en
el mensaje anterior. Sin embargo, sigo sin navegador, ya que el epipany
se
El Sat, 10 Nov 2012 13:08:36 -0600, Francisco Eduardo Ascencio Dominguez
escribió:
Buenas amigos.
tengo una duda lo que pasa es que tengo gimp 2.6 y quisiera actualizarlo
a 2.8 como ago esto desde la terminal ?
Squeeze sólo tiene la versión 2.6.10 (no hay una versión superior
disponible en
El Sat, 10 Nov 2012 16:30:57 -0300, Sergio Bessopeanetto escribió:
El 10/11/12 12:12, Camaleón escribió:
(...)
Sinceramente, y aunque cueste de creer, a día de hoy hasta Windows -por
muy malo que sea- ofrece mayor libertad e impone menos restricciones a
los usuarios en cuestión de
El Sat, 10 Nov 2012 22:26:44 +, carlopmart escribió:
(...)
(bienvenido al club :-P)
Pero lo bueno del caso es que el paquete gnome-screensaver está
instalado e iniciado el proceso con mi usuario. Es más, me he ido a
fregar los platicos y a la vuelta me he encontrado con la pantalla
El Sat, 10 Nov 2012 22:14:43 -0500, islanis escribió:
isla...@infomed.sld.cu escribió:
Hola gente, necesito que si alguien lee esto please que si puede me
envíe por correo las ultimas versiones de Jquery y Prototype , es que
los necesito y ahora no tengo internet, si alguien me pudiera
El 11/11/2012, a las 05:26, José Mateo jtma...@gmail.com escribió:
Hola Francisco:
Decías el martes, 06 de noviembre del 2012 a las 10:00
Ok ya entendí todo saludos y muchas gracias aqui estaremos al tanto
de todo
www.lypef-warez.com
Hay que tener en cuenta no hacer topposting, osea
El 11/11/2012, a las 08:53, Camaleón noela...@gmail.com escribió:
El Sat, 10 Nov 2012 13:08:36 -0600, Francisco Eduardo Ascencio Dominguez
escribió:
Buenas amigos.
tengo una duda lo que pasa es que tengo gimp 2.6 y quisiera actualizarlo
a 2.8 como ago esto desde la terminal ?
Squeeze
El Sun, 11 Nov 2012 08:34:35 -0600, Hugo Vanwoerkom escribió:
Camaleón wrote:
El Thu, 11 Oct 2012 23:30:53 -0300, Sergio Bessopeanetto escribió:
¿Alguien sabe algo de Camaleon?
Hace ya casi 3 semanas que no se la ve por acá.
Por aquí ando :-)
Tuve unas semanas de trabajo que no pude
El Sun, 11 Nov 2012 09:37:20 -0600, Francisco Eduardo Ascencio Dominguez
escribió:
El 11/11/2012, a las 08:53, Camaleón noela...@gmail.com escribió:
(...)
Pero salvo que te manejes bien con las dependencias/conflictos que te
pueda generar usar un paquete como The GIMP desde los repos de
El 11/11/2012, a las 10:21, Camaleón noela...@gmail.com escribió:
El Sun, 11 Nov 2012 09:37:20 -0600, Francisco Eduardo Ascencio Dominguez
escribió:
El 11/11/2012, a las 08:53, Camaleón noela...@gmail.com escribió:
(...)
Pero salvo que te manejes bien con las dependencias/conflictos
Que ejemplo que da. Terrible ejemplo.
No puede tener el cargo que tiene en una gestión normal.
ver - http://bayresmail.com.ar/imagebin/up/59e7a744462f99ad52fc053fe9fb3d29.png
ver - http://bayresmail.com.ar/imagebin/up/e440778ff1816856dd1001324522f0ed.png
--
Voip Mumble :.
El Sun, 11 Nov 2012 11:20:17 -0600, Francisco Eduardo Ascencio Dominguez
escribió:
El 11/11/2012, a las 10:21, Camaleón noela...@gmail.com escribió:
(...)
ok. y por que no me recomiendas actualizarlo ? que es mejor 2.6 ?
saludos
Salvo que necesites urgentemente alguna funcionalidad que
Saludos a todos ...
Desinstale gdm3 pretendiendo quitar gnome,
y ahora solo puedo entrar como root; Cuando entro como otro usuario
me da un errror de ECEauthority que NO permite usar las X; No se como
dar la autorización a ese usuario usando xauth. Como lo hago?
Muchas gracias.
El 11/11/2012 19:05, Aristobulo Pinzon aristobulopin...@yahoo.com
escribió:
Saludos a todos ...
Desinstale gdm3 pretendiendo quitar gnome,
y ahora solo puedo entrar como root; Cuando entro como otro usuario
me da un errror de ECEauthority que NO permite usar las X; No se como
dar la
gracias ya lo tengo a la mano, gracias a todos
Camaleón noela...@gmail.com escribió:
El Sat, 10 Nov 2012 22:14:43 -0500, islanis escribió:
isla...@infomed.sld.cu escribió:
Hola gente, necesito que si alguien lee esto please que si puede me
envíe por correo las ultimas versiones de Jquery y
Camaleón wrote:
El Sun, 11 Nov 2012 08:34:35 -0600, Hugo Vanwoerkom escribió:
Camaleón wrote:
El Thu, 11 Oct 2012 23:30:53 -0300, Sergio Bessopeanetto escribió:
¿Alguien sabe algo de Camaleon?
Hace ya casi 3 semanas que no se la ve por acá.
Por aquí ando :-)
Tuve unas semanas de trabajo
Hola. Puede ser un problema que esté usando la versión más nueva de
iceweasel con gnome 2. En las últimas versiones del navegador (de hecho
desde la versión 10, que está como predeterminada en testing), se
empieza a utilizar como interfaz de accesibilidad de lleno at-spi2,
porque at-spi, que
Hola lista. Después de tantos dolores de cabezas he puesto a funcionar
perfectamente el MultiSystem en mi Debian 6. Ya desde mi USB he logrado un
multiboot con varios SO GNU/Linux y herramientas necesarias para mi
trabajo, por cierto me gusta más MultiSystem que otros similares para
Windows como
El Fri, 9 Nov 2012 20:44:01 -0300
Fabián Bonetti mama21mama2...@yahoo.com.ar escribió:
On Fri, 9 Nov 2012 20:07:21 -0300
Angel Claudio Alvarez an...@angel-alvarez.com.ar wrote:
Lee el asunto [OT] Off Topic
Si no te agrada no respondas.
No es que no me agrada por el contrario puedo
On Sun, 11 Nov 2012 19:09:44 -0300
Angel Claudio Alvarez an...@angel-alvarez.com.ar wrote:
No es que no me agrada por el contrario puedo rebatir cada uno de lo puntos
muy facilmente porque no los pueden sostener, pero esto es UNA LISTA TECNICA
y por mas OT que le pongas NO CORRESPONDE
On Sun, Nov 11, 2012 at 09:01:36PM -0300, Fabián Bonetti wrote:
On Sun, 11 Nov 2012 19:09:44 -0300
Angel Claudio Alvarez an...@angel-alvarez.com.ar wrote:
No es que no me agrada por el contrario puedo rebatir cada uno de lo puntos
muy facilmente porque no los pueden sostener, pero esto
El 12/11/2012 05:38, Aristobulo Pinzon aristobulopin...@yahoo.com
escribió:
AAHH Bruto que es mi caballo!
Gracias Raúl Armenta
asunto slucionado con tu ayuda.
Es q' cuando tu usabas kde yo apenas andaba
con el XP$ o algo mas atras!
De nada majete
Márcalo como solucionado la próxima
Senhores,
Alguém sabe como fazer o power management da bateria funcionar corretamente
com o kernel do Debian testing 3.2?
O monitor da bateria, quando plugada, acusa sempre energia em 100%, mas a
luz do indicador no laptop fica vermelho piscando que pelo manual do laptop
é indicativo de que ela
Qnd eu advinhar em qual hardware e GUI esta ocorrendo essa situação,
aí quem sabe posso dar umas sugestões. =-D
Em 11/11/12, FHRB Toledofernandohtol...@gmail.com escreveu:
Senhores,
Alguém sabe como fazer o power management da bateria funcionar corretamente
com o kernel do Debian testing 3.2?
Alguem pode me ajudar
tenho um hd externo samsung de 1t, ele montava nolmalmente no debian agora
não monta mais, meu pc ler o dispositivo mas não monta. Quando rodo o
comando
mount /dev/sdb1 /media/SAMSUNG
aparece a mensagem
mount: o dispositivo especial /dev/sdb1 não existe
--
Manoel
Boa tarde Manoel,
Provavelmente osistema estamapeando a unidade em outro endereço.
Digite fdisk -l, descubra o novo mapeamento e altere o seu comando
mount para o endereço correto.
--
Atenciosamente,
Rafael Balbino
Certificado/Certified
- ITILv3 Foundation
Em 11-11-2012 17:01,
Boa tarde caros amigos.
Venho por meio desta pois preciso de uma ajuda, segue minha duvida abaixo:
Preciso fazer uma instalação do GNU/linux Ubuntu (sei que a lista de
discussão é sobre o debian,mais por ser a única q utilizo e por ser um
sistema baseado no debian gostaria de umas dicas) em uma
vou motar meu hd externo aparece a mensagem
/dev/sdb1 is listed in /etc/fstab refusing to mount
Alguem pode me ajudar?
--
Manoel
Saudações.
Tenho que permitir compartilhamentos nfs e cifs para alguns usuários,
mas o problema é que para montar o compartilhamento automático tenho que
colocar os dados no /etc/fstab com login e senha do compartilhamento. O
problema é que não quero que o usuário tenha conhecimento dessa
*Meu fstab está assim*
# /etc/fstab: static file system information.
#
# file system mount point type options dump pass
proc/procprocdefaults00
#Entry for /dev/sda2 :
UUID=add45b71-37b9-4b80-8944-e4c810df6641/jfs
errors=remount-ro01
#Entry for
On 11/11/2012 06:59 PM, Manoel Pedro de Araújo wrote:
vou motar meu hd externo aparece a mensagem
/dev/sdb1 is listed in /etc/fstab refusing to mount
Alguem pode me ajudar?
--
Manoel
Boa noite Manoel,
A mensagem diz que o seu dispositivo (sdb1) já está listado no fstab...
sendo assim
Amigo, vê se o remastersys te atende.
Tem muito material sobre ele fácil de axar no google.
=D
--®!©@®dø--
TECNOLOGIA EM REDES DE COMPUTADORES.
PÓS GRADUANDO EM SISTEMAS DE INFORMAÇÃO
LIVRE POR NECESSIDADE, LINUX POR OPÇÃO!
NÃO SEJA PRÁTICO, SEJA EFICIENTE!
USE
Escreva para a lista do ubuntu.
--
| .''`. A fé não dá respostas. Só impede perguntas.
| : :' :
| `. `'`
| `- Je vois tout
--
To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
Eu já acho que ele deveria escrever aqui.
Ubuntu é um Debian domesticado, mas ainda é Debian
Jack Pogorelsky Junior
*Eng° Mecânico (CREA-RS 136845)
*http://www.pogorelsky.net
Tel. +55 (51) 97842748
Email: j...@sulmail.com mailto:j...@sulmail.com
Em 11-11-2012 21:46, P. J. escreveu:
Escreva
Dom, 11.11.2012, FHRB Toledo disse:
Senhores,
Alguém sabe como fazer o power management da bateria funcionar
corretamente com o kernel do Debian testing 3.2?
No meu hardware tudo funciona belezinha!
O monitor da bateria, quando plugada, acusa sempre energia em 100%,
mas a luz do
Dom, 11.11.2012, Manoel Pedro de Araújo disse:
*Meu fstab está assim*
# /etc/fstab: static file system information.
#
# file system mount point type options dump pass
proc/procprocdefaults00
#Entry for /dev/sda2 :
UUID=add45b71-37b9-4b80-8944-e4c810df6641
Dom, 11.11.2012, Jack Jr disse:
Eu já acho que ele deveria escrever aqui.
Ubuntu é um Debian domesticado, mas ainda é Debian
Ubuntu Sauvage!
Jack Pogorelsky Junior
*Eng° Mecânico (CREA-RS 136845)
*http://www.pogorelsky.net
Tel. +55 (51) 97842748
Email: j...@sulmail.com
Amigos da lista estou ficando louco com esse erro, mas antes que alguem
me pergunte por que não uso o aptitude para instalar a libpng: Esta é
uma maquina de teste e estou efetuando tudo manualmente exatamente para
aprender sobre compilação no Linux (Debian) e na hora de instalar o PHP5
com
Every version upgrade of Dovecot causes config problems (running Sid). I hand
edited the doveconf -n stuff in after choosing to keep my old .conf and not
being able to get the choice again. Got it working, finally.
KMail seems to be getting my imap stuff but get and error box each time:
Error
On Sunday, November 11, 2012 01:50:03 AM Gean Ceretta wrote:
Thanks Neal and Charlie, I've tried:
*# chown -Rv gean:gean /home/gean* but the ownership stays the same root,
maybe its important to say that the /home is an NTFS partition, mounted by
/etc/fstab as:
*/dev/sda3 /home auto
i just installed apt-mirror for creating a local mirror but regarding
articles that i have been through told me that i may need 26 GB of
space. however right now the download has exceeded 40GB and still
downloading what i needed is a debian squeeze local repository i dont
know what is going on
* Gean Ceretta geancere...@linuxmail.org [12 05:45]:
I've tried change the ownership of the directory with:
I recently was unable to change ownership, permissions, etc., of a
directory. Finally I discovered that I somehow had mounted the
directory twice, and that the second mount was
On 10 Nov 2012, Charles Kroeger wrote:
On Sat, 10 Nov 2012 03:00:01 +0100
Chris Bannister cbannis...@slingshot.co.nz wrote:
if someone has been fiddling with it.
I'm the one who's fiddling with it and if you want to suggest something be
specific
like what BIOS setting did you have in
On Nov 10, 2012, at 9:49 PM, Charles Blair wrote:
Thank you very much for your reply. I think I will post
a restatement of the question. I would have thought that
a dual boot of windows 7 and debian would be a common
enough problem that there should be something about it
somewhere, perhaps
On Sun, 11 Nov 2012 11:20:38 +0100
Ralf Mardorf ralf.mard...@alice-dsl.net wrote:
Hi :)
I already asked on some lists about my RME HDSPe AIO card. I
explicitly bought this for Linux usage only in 2011, but never needed
all available channels until now. Now I notice that the card can't be
On Sat, 10 Nov 2012 16:09:36 -0600
Charles Blair c-bl...@illinois.edu wrote:
I am trying to set up a dual-boot windows 7 / wheezy.
The installer shows me 3 primary ntfs partitions,
presumably for windows7.
I have been able to resize to create freespace.
As I understand it, /
Dear Michael.
I thought of another approach.
Could I get the HPLaserJetP1102w to work as
a network printer ?
If the answer is yes, would the various
printers connected to the network still
face the same problem, or do they just see the network ?
I tried the HP we site, and it eventually
said
On Sat, 10 Nov 2012 17:45:20 -0500 (EST)
Stephen Powell zlinux...@wowway.com wrote:
On Sat, 10 Nov 2012 13:46:09 -0500 (EST), Martin Steigerwald wrote:
On Sat, 10 Nov 2012 Lisi Reisz wrote:
I have been trying to get to grips with compiling a custom
kernel. I have been shying away for too
Simon Hoerder, 9.11.2012:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA224
On 09/11/12 10:47, Ralf Mardorf wrote:
Check your DE's Pulseaudio settings too.
Hi,
Using PulseAudio Volume control:
Nothing is muted, all volume settings are 100%. But it lists Dummy
Output as output
Gean Ceretta, 8.11.2012:
- Original Message -
From: Emmanuel Bourgerie
Sent: 11/08/12 08:43 AM
To: debian-user@lists.debian.org
Subject: Audio issue with Intel HDA driver
Hi everyone ! I'm having an issue with my new motherboard, I just installed
Debian sid and I don't have any
reportbug 6.3.4
There is no way to go back to correct incorrect entries. I can e.g. not
correct e-mail settings and thus not use reportbug.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
On Sun, 11 Nov 2012 13:23:49 +0100
Mats Olofsson mats.olofs...@mbox321.swipnet.se wrote:
Hello Mats,
reportbug 6.3.4
There is no way to go back to correct incorrect entries. I can e.g. not
correct e-mail settings and thus not use reportbug.
IDK where it's kept, but how about editing the config
On Sun, Nov 11, 2012 at 2:15 AM, Tom H tomh0...@gmail.com wrote:
On Sun, Nov 11, 2012 at 12:42 AM, Gean Ceretta
geancere...@linuxmail.org wrote:
Good night friends, I'll appreciate some help here: For some reason, I'm not
owner of my home folder, that implicates in some problems for programs
Am Sonntag, 11. November 2012, 12:50:33 schrieb Brad Rogers:
On Sun, 11 Nov 2012 13:23:49 +0100
Mats Olofsson mats.olofs...@mbox321.swipnet.se wrote:
Hello Mats,
reportbug 6.3.4
There is no way to go back to correct incorrect entries. I can e.g. not
correct e-mail settings and thus
On Sun 11 Nov 2012 at 05:44:00 +0530, L V Gandhi wrote:
However I have one more requirement, the boot menu has debian and ubuntu
but not windows8 as used to be previously.
I would like windows 8 also included in boot menu.
See where you get by booting into Debian and doing 'update-grub' as
On Sun 11 Nov 2012 at 10:25:34 +, GEOFF BAGLEY wrote:
I tried the HP we site, and it eventually
said that the printer was not supported on
Debian squeeze.
Not according to this:
http://hplipopensource.com/hplip-web/models/laserjet/hp_laserjet_professional_p1102w.html
CUPS in Squeeze
On Sun, Nov 11, 2012 at 7:00 PM, Brian a...@cityscape.co.uk wrote:
On Sun 11 Nov 2012 at 05:44:00 +0530, L V Gandhi wrote:
However I have one more requirement, the boot menu has debian and ubuntu
but not windows8 as used to be previously.
I would like windows 8 also included in boot menu.
Thanks Brian. I had given up, and taken the machine back to my wife's desk.
So I went there, and went to the site you quoted. My wife'nachine runs
Ubuntu 12.04.
The site installed the software- TWICE!, so I went to the print menu and there
were two copies of the printer there. One (the first
On Sat, 10 Nov 2012 03:00:01 +0100
Chris Bannister cbannis...@slingshot.co.nz wrote:
or even a BIOS setting
OK Chris, I have to eat humble pie here, it was a BIOS setting. Something about
a
setting in the plug-and-play versus the BIOS..this setting got changed to
letting
the BIOS decide
On Sun, 11 Nov 2012 11:10:01 +0100
Anthony Campbell a...@acampbell.org.uk wrote:
if you have a video card in a
slot rather than integral in the MB, take it out and put it back.
Thanks for this suggestion, it can't hurt. If it works I'll let you know.
--
CK
--
To UNSUBSCRIBE, email to
On Sun 11 Nov 2012 at 20:28:46 +0530, L V Gandhi wrote:
On Sun, Nov 11, 2012 at 7:00 PM, Brian a...@cityscape.co.uk wrote:
See where you get by booting into Debian and doing 'update-grub' as
root.
I did that. But could not get it.
On the installed system run 'os-prober' and look at
hi,
Am 09.11.2012 um 16:32 schrieb Brian a...@cityscape.co.uk:
No, you will need Wheezy at least. The switching from Ghostscript to
Poppler is done via the cups-filters package, which does not exist in
Squeeze.
phu … I'am unsure, but this machine is only a print server, so maybe I can
I am brand new to Debian, have used RH's for about 10 years, SGI
SuSE before that, Mandrake before that, ConvexOS before that. I
installed Squeeze-kfreeBSD on a Socket 939 Opteron server that I
recently replaced the root drive (which had croaked) on. I like the
small memory footprint
Am Samstag, 10. November 2012 schrieb Stephen Powell:
On Sat, 10 Nov 2012 13:46:09 -0500 (EST), Martin Steigerwald wrote:
On Sat, 10 Nov 2012 Lisi Reisz wrote:
I have been trying to get to grips with compiling a custom kernel.
I have been shying away for too long.
I am following
Am Sonntag, 11. November 2012 schrieb Tom H:
On Sat, Nov 10, 2012 at 2:15 PM, Lisi Reisz lisi.re...@gmail.com
wrote:
On Saturday 10 November 2012 18:46:09 Martin Steigerwald wrote:
Am Samstag, 10. November 2012 schrieb Lisi Reisz:
I have been trying to get to grips with compiling a custom
Slackware 14.0 is available and it also has a small footprint. If you
choose not to install all the bloatware no g.u.i. you can probably end up
with a full command line installation except for emacs in a little under a
hundred meg. If you decide to install emacs, I suggest you do it using
On 11/11/12 09:50, William A. Mahaffey III wrote:
[root@opty165a:/etc, Sun Nov 11, 10:49 AM] 592 # ll /dev/ad*
crw-rw 1 root disk 0, 78 Nov 10 08:34 /dev/ad0
crw-rw 1 root disk 0, 79 Nov 10 08:34 /dev/ad0s1
crw-rw 1 root disk 0, 82 Nov 10 08:34 /dev/ad4
crw-rw 1 root disk 0, 83
Hello,
I have on a Debian squeeze server an issue, that I can only login as user rd,
not as user gpxrecorder, although there seems to be no difference in the
accounts:
bokomoko:~# diff ~rd/.ssh/authorized_keys ~gpxrecorder/.ssh/authorized_hosts
bokomoko:~# ls -l ~rd/.ssh/authorized_keys
On 11/11/2012 14:39, Rainer Dorsch wrote:
Hello,
I have on a Debian squeeze server an issue, that I can only login as user rd,
not as user gpxrecorder, although there seems to be no difference in the
accounts:
bokomoko:~# diff ~rd/.ssh/authorized_keys ~gpxrecorder/.ssh/authorized_hosts
On 11/11/12 13:13, David Christensen wrote:
On 11/11/12 09:50, William A. Mahaffey III wrote:
[root@opty165a:/etc, Sun Nov 11, 10:49 AM] 592 # ll /dev/ad*
crw-rw 1 root disk 0, 78 Nov 10 08:34 /dev/ad0
crw-rw 1 root disk 0, 79 Nov 10 08:34 /dev/ad0s1
crw-rw 1 root disk 0, 82 Nov 10
Rainer Dorsch, 11.11.2012:
Hello,
I have on a Debian squeeze server an issue, that I can only login as user rd,
not as user gpxrecorder, although there seems to be no difference in the
accounts:
bokomoko:~# diff ~rd/.ssh/authorized_keys ~gpxrecorder/.ssh/authorized_hosts
bokomoko:~# ls
On 11/11/12 11:39, Rainer Dorsch wrote:
I have on a Debian squeeze server an issue, that I can only login as user rd,
not as user gpxrecorder, although there seems to be no difference in the
accounts:
bokomoko:~# diff ~rd/.ssh/authorized_keys ~gpxrecorder/.ssh/authorized_hosts
Have you
On 11/11/12 13:05, Jude DaShiell wrote:
Slackware 14.0 is available and it also has a small footprint. If you
choose not to install all the bloatware no g.u.i. you can probably end up
with a full command line installation except for emacs in a little under a
hundred meg. If you decide to
On 11/11/12 12:54, William A. Mahaffey III wrote:
Does Debian-kfreeBSD in fact have ext3fs support ?
I dunno -- perhaps that's the problem. (I use Debian Squeeze i386 and
Debian Wheezy amd64.)
A console-only install of Debian Squeeze i386 can have a fairly small
memory footprint (my CVS
Dmesg output/boot console contains a line: APEI: Can not request iomem
region ... for GARs.
Environment:
- Super Micro X8I motherboard
- Debian squeeze 6.0.6
- Backports kernel: Linux debian 3.2.0-0.bpo.3-amd64 #1 SMP Thu Aug 23
07:41:30 UTC 2012 x86_64 GNU/Linux
Context:
[1.172543]
Am Sunday 11 November 2012 schrieb staticsafe:
On 11/11/2012 14:39, Rainer Dorsch wrote:
Hello,
I have on a Debian squeeze server an issue, that I can only login as user
rd, not as user gpxrecorder, although there seems to be no difference in
the accounts:
bokomoko:~# diff
On Sunday, November 11, 2012 02:39:14 PM Rainer Dorsch wrote:
Hello,
I have on a Debian squeeze server an issue, that I can only login as user
rd, not as user gpxrecorder, although there seems to be no difference in
the accounts:
I'll bet some key files in .ssh/ are readable by other than
Am Sunday 11 November 2012 schrieb Selim T. Erdogan:
Rainer Dorsch, 11.11.2012:
Hello,
I have on a Debian squeeze server an issue, that I can only login as user
rd, not as user gpxrecorder, although there seems to be no difference in
the accounts:
bokomoko:~# diff
Am Sunday 11 November 2012 schrieb David Christensen:
On 11/11/12 11:39, Rainer Dorsch wrote:
I have on a Debian squeeze server an issue, that I can only login as user
rd, not as user gpxrecorder, although there seems to be no difference in
the accounts:
bokomoko:~# diff
Hello David,
David Christensen dpchr...@holgerdanske.com wrote:
On 11/11/12 09:50, William A. Mahaffey III wrote:
crw-rw 1 root disk 0, 89 Nov 10 08:34 /dev/ad6s1
[root@opty165a:/etc, Sun Nov 11, 11:44 AM] 594 # mount -t ext3
/dev/ad6s1 /mnt
mount: /dev/ad6s1 : No such device
Hello,
Mandriva refugee here. :-) New to Debian, but have been using some form
of *NIX since 1986. Have been a happy Mandriva user since the Mandrake
7 days, but that new company that purchased it, resulting in them losing
most of their talent, has finally caused me to leave; the last update to
Thanks Charlie, Russell, Neal, Zind and Tom.
As you say, the problem is the NTFS partition does not support ownership for
individual folders (not POSIX compatible), just one ownership for the whole
partition.
Following this tutorial here:
On 11/11/2012 16:44, Rainer Dorsch wrote:
Am Sunday 11 November 2012 schrieb staticsafe:
On 11/11/2012 14:39, Rainer Dorsch wrote:
Hello,
I have on a Debian squeeze server an issue, that I can only login as user
rd, not as user gpxrecorder, although there seems to be no difference in
the
On Sunday, November 11, 2012 04:08:47 PM David Christensen wrote:
On 11/11/12 12:54, William A. Mahaffey III wrote:
Does Debian-kfreeBSD in fact have ext3fs support ?
I dunno -- perhaps that's the problem. (I use Debian Squeeze i386 and
Debian Wheezy amd64.)
A console-only install of
1 - 100 of 116 matches
Mail list logo