Re: [RESOLU] recherche conseil ou retour d'expérience sur parc info école primaire

> Le 15 oct. 2015 à 12:49, andre_deb...@numericable.fr a écrit : > > On Thursday 15 October 2015 11:48:43 Christophe DE NATALE wrote: >> Alors, j’ai fait un peu le tour des différentes solutions >> qui ont été proposées : >> * Abulédu => très séduisant comme solution, les moyens >> seraient

Re: fstab entry for a 3.6TB drive

I would recommend not using "dump" and "pass", set them to 0. Yours sincerely, Jayson Willson 15.10.2015 15:52, Sharon Kimble пишет: I'm trying to mount a 3.6TB hard drive formatted and labelled with gparted, and I have twice managed to lock myself out of the computer until I removed the

Re: [RESOLU] recherche conseil ou retour d'expérience sur parc info école primaire

Le 15/10/2015 14:20, Christophe DE NATALE a écrit : [...] Christophe, Attention ! ! ! : [RESOLU] : pas tout à fait :-) Aucune école de la Seine Saint Denis n'a déboursé 8000€ TTC pour un serveur. Ben comment ils ont fait alors, l’image iso est « propriétaire » puisque c’est Ryxeo qui la

[RESOLU] Re: recherche conseil ou retour d'expérience sur parc info école primaire

> Le 19 sept. 2015 à 10:52, Nicolas Aldegheri a écrit : > > Le 18/09/2015 22:45, Christophe De Natale a écrit : >> J’ai sûrement omis de communiquer certaines données de mon problème, comme : >> village de Dordogne de 600 habitants donc mairie pas avec des gros moyens, 7

Re: Session "guest"

Le Wed, 14 Oct 2015 21:18:52 +0200, "C. Mourad Jaber" a écrit : > Bonjour, > > Est-il possible d'avoir une session invité sur une debian, comme ce > que fait ubuntu ? > > Je n'arrive pas à trouver trop d'infos sur ce sujet. > > Idéalement, ce serai de faire un

Re: [apt] geen updates

On Wed, 14 Oct 2015 16:45:32 +0200 Matijs van Zuijlen wrote: > > Precies. En alles staat ok. Maar updaten ho maar. Logs, alles is > > bekeken en ik geef het op. Het gaat me teveel tijd kosten. > > Dus Shift+U doet niets? Bizar! Nope. Dat is ook het maffe... -- richard

Re: direct ethernet connection between computer and printer

On Thu, Oct 15, 2015 at 02:54:31AM -0500, rlhar...@oplink.net wrote: > On Thu, October 15, 2015 1:30 am, Reco wrote: > > Did this 'configuration report' mention the netmask used by printer? > > What about printer's MAC? > > Yes; the title is "JetDirect Configuration Page", which provides the >

Re: systemd alternative for Jessie?

On Wed, Oct 14, 2015 at 10:47:48PM +0200, Arno Schuring wrote: > > > Date: Wed, 14 Oct 2015 22:26:53 +0200 > > From: geo...@nsup.org > > > > Le tridi 23 vendémiaire, an CCXXIV, Arno Schuring a écrit : > >> It's been years since I've seen a system where the OS boot took longer > >> than the BIOS

fstab entry for a 3.6TB drive

I'm trying to mount a 3.6TB hard drive formatted and labelled with gparted, and I have twice managed to lock myself out of the computer until I removed the offending line in fstab. This is the fstab line that I'm going to try and use - --8<---cut

Re: Unable to Install Stretch on Laptop, not Loading iwlwifi

> This seems very strange- if you are able to get the free version to boot you > should be able to get the non-free ISO to boot as well. They are identical, > save the inclusion of non-free firmware. Yes. > > The 'no bootable device' message- does this occur when you select the hard > drive as

Re: fstab entry for a 3.6TB drive

On Thu, Oct 15, 2015 at 01:52:37PM +0100, Sharon Kimble wrote: > > I'm trying to mount a 3.6TB hard drive formatted and labelled with > gparted, and I have twice managed to lock myself out of the computer > until I removed the offending line in fstab. > > This is the fstab line that I'm going to

Re: [RESOLU] Re: recherche conseil ou retour d'expérience sur parc info école primaire

On Thursday 15 October 2015 11:48:43 Christophe DE NATALE wrote: > Alors, j’ai fait un peu le tour des différentes solutions > qui ont été proposées : > * Abulédu => très séduisant comme solution, les moyens > seraient disponibles, ce serait le candidat idéal. > Malheureusement, sur une

Re: Warsaw

On Thu, Oct 15, 2015 at 04:05:53AM +, Richard Antunes wrote: > Olá Thiago, > obrigado pela sua opinião.Eu achei estranho também o fato de só o > "http//:ftp.debian.org" apresentar erro, os outros conectaram normalmente. a versão desse negócio pra windows dava um problema com ipv6, se vc

Re: Warsaw

Srs, não sei se é o caso do Warsaw, mas alguns aplicativos bacunçam o sources.list do Debian. Tive problema com isso depios de instalar o Google Earth, o apt não atualizava mais o sistema. Segui as dicas da internet e blah blah blah, nada resolveu. Fiz um teste desinstalando o Google Earth e...

Re: direct ethernet connection between computer and printer

On Thu, October 15, 2015 1:30 am, Reco wrote: > Did this 'configuration report' mention the netmask used by printer? > What about printer's MAC? Yes; the title is "JetDirect Configuration Page", which provides the following: IP ADDRESS: 192.168.1.210 SUBNET MASK: 255.255.255.0 DEF. GATEWAY:

Re: direct ethernet connection between computer and printer

On Thu, 15 Oct 2015 00:34:14 -0500 rlhar...@oplink.net wrote: > Yesterday in the office of my associate, I tried without success to > install a HP LaserJet 2100TN in a wired local area network (LAN) > consisting of nothing but a i386 running Windows 8, a modem (which I > think also is router) and

Re: make system boot straight to browser connection

On Thursday 15 October 2015 10:13:17 ??? wrote: :-)) Brian, I rarely laugh out loud at my computer. I did when I saw the sender of this mail. Lisi

Re: gnome mouse configuration

> That's strange. In GNOME I distinctly recall being able to access a > range of > tabs for all connected pointer input devices (mice, touchpads, etc.). > I'm not > sure. I use Xfce. Yes, there are different settings for mouse, touchpad and tablet. I don't think there's separate settings for

Re: make system boot straight to browser connection

On Thu 15 Oct 2015 at 03:29:38 -0500, Richard Owlett wrote: > Richard Owlett wrote: > >[snip] > > > >How to do an autologin? In a DE independent way? > > > >http://manpages.debian.org/cgi-bin/man.cgi?query=autologin=1 > >gave no relevant links. > > > >A Google search gave only decade old or DE

Re: problemas con nouveau en testing

El jueves, 15 oct 2015 a las 00:40 UTC Gonzalo Rivero escribió: > [27.212] (II) LoadModule: "nouveau" > [27.213] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so > [27.463] (II) Module nouveau: vendor="X.Org Foundation" > [27.464] (II) LoadModule: "nv" > [27.505]

Re: direct ethernet connection between computer and printer

On 15/10/2015 06:34, rlhar...@oplink.net wrote: Yesterday in the office of my associate, I tried without success to install a HP LaserJet 2100TN in a wired local area network (LAN) consisting of nothing but a i386 running Windows 8, a modem (which I think also is router) and an ethernet switch.

Re: direct ethernet connection between computer and printer

On Thu, October 15, 2015 2:33 am, Martin Smith wrote: > with most laser printers you can access their control interface with a > browser, just connect your laptop directly to it and point your browser at > the address the printer gives, this is assuming it does not have a front > panel you can

Re: direct ethernet connection between computer and printer

Hi. On Thu, 15 Oct 2015 00:34:14 -0500 rlhar...@oplink.net wrote: > Yesterday in the office of my associate, I tried without success to > install a HP LaserJet 2100TN in a wired local area network (LAN) > consisting of nothing but a i386 running Windows 8, a modem (which I think > also

Re: Session "guest"

Bonjour, Le mercredi 14 octobre 2015 à 21:18, C. Mourad Jaber a écrit : > Est-il possible d'avoir une session invité sur une debian, comme ce que fait > ubuntu ? > > Je n'arrive pas à trouver trop d'infos sur ce sujet. > > Idéalement, ce serai de faire un utilisateur qui a un profil dans un >

Re: A server getting mad

Le 14/10/2015 21:32, Sven Hartge a écrit : rudu wrote: All I could gather via phone call during the problem with a top and netstat command on the server is that a "xddlvqhhrd" command is consuming 25% of CPU and that a connection is established with a remote IP by a program

Re: direct ethernet connection between computer and printer

On Thu, October 15, 2015 3:18 am, Joe wrote: > I think you just missed it, until Win7 there was a Telnet client. You > can install/enable one (genuine MS) on 8, I have done it but a while ago, > the details are out there somewhere. Installing anything on the other guy's machine is asking for

spelling error in [Re: make system boot straight to browser connection]

Richard Owlett wrote: Richard Owlett wrote: [snip] How to do an autologin? In a DE independent way? http://manpages.debian.org/cgi-bin/man.cgi?query=autologin=1 gave no relevant links. A Google search gave only decade old or DE related links. I currently use Mate, but exploring other

Re: systemd alternative for Jessie?

Alex Moonshine writes: > On Wed, 14 Oct 2015 07:49:08 -0500 > Richard Owlett wrote: > >> What has the end-user, with a single machine, gained today from >> the adoption of systemd? > > Speaking for myself: > 1. It took me an hour of googling to

Re: make system boot straight to browser connection

Richard Owlett wrote: [snip] How to do an autologin? In a DE independent way? http://manpages.debian.org/cgi-bin/man.cgi?query=autologin=1 gave no relevant links. A Google search gave only decade old or DE related links. I currently use Mate, but exploring other desktops(avoiding Gnome

Re: direct ethernet connection between computer and printer

On Thu 15 Oct 2015 at 03:45:24 -0500, rlhar...@oplink.net wrote: > On Thu, October 15, 2015 3:18 am, Joe wrote: > > > I'd expect one with an > > Ethernet port to run a simple web server for configuration. > > I have not yet found mention of one regarding the hp2100tn. nmap > > Best not go

Re: [OT] Grafear chequeos nagios personalizados

El Thu, 15 Oct 2015 17:17:26 +0200, Maykel Franco escribió: > El día 15 de octubre de 2015, 17:13, Camaleón > escribió: >> El Thu, 15 Oct 2015 16:13:21 +0200, Maykel Franco escribió: >> >>> Buenas, no consigo grafear 2 cosas en el mismo gráfico... No veo nada >>> en la

Re: [RESOLU] recherche conseil ou retour d'expérience sur parc info école primaire

> Le 15 oct. 2015 à 17:47, andre_deb...@numericable.fr a écrit : > > On Thursday 15 October 2015 17:06:36 Christophe De Natale wrote: >> 8.000€ peuvent sembler cher mais tout est relatif, >> ici c’est une solution «clés en main». >> Les tarifs annoncés m’ont été communiqués >> par le

Re: [OT] Grafear chequeos nagios personalizados

El Thu, 15 Oct 2015 16:13:21 +0200, Maykel Franco escribió: > Buenas, no consigo grafear 2 cosas en el mismo gráfico... No veo nada en > la documentación. Imaginaros que quiero grafear en el mismo gráfico la > memoria ram usada, la disponible y la swap, por poner un ejemplo, y cada > uno con

Re: [RESOLU] recherche conseil ou retour d'expérience sur parc info école primaire

On Thursday 15 October 2015 15:31:17 Christophe De Natale wrote: > >>> Aucune école de la Seine Saint Denis n'a déboursé > >>> 8000€ TTC pour un serveur. > >> Ben comment ils ont fait alors, l’image iso est « propriétaire » > >> puisque c’est Ryxeo qui la distribue et elle n’est pas dispo > >>

Re: [OT] Grafear chequeos nagios personalizados

El día 15 de octubre de 2015, 17:13, Camaleón escribió: > El Thu, 15 Oct 2015 16:13:21 +0200, Maykel Franco escribió: > >> Buenas, no consigo grafear 2 cosas en el mismo gráfico... No veo nada en >> la documentación. Imaginaros que quiero grafear en el mismo gráfico la >>

Re: [OT] Grafear chequeos nagios personalizados

El día 15 de octubre de 2015, 17:26, Camaleón escribió: > El Thu, 15 Oct 2015 17:17:26 +0200, Maykel Franco escribió: > >> El día 15 de octubre de 2015, 17:13, Camaleón >> escribió: >>> El Thu, 15 Oct 2015 16:13:21 +0200, Maykel Franco escribió: >>>

Re: [RESOLU] recherche conseil ou retour d'expérience sur parc info école primaire

On Thursday 15 October 2015 17:06:36 Christophe De Natale wrote: > 8.000€ peuvent sembler cher mais tout est relatif, > ici c’est une solution «clés en main». > Les tarifs annoncés m’ont été communiqués > par le responsable commercial, j’ai la doc à disposition. Je commence à mieux

Re: [RESOLU] recherche conseil ou retour d'expérience sur parc info école primaire

> Le 15 oct. 2015 à 15:49, aishen a écrit : > > J ai amd x8 16 Go fait par un artisan pour 720 euros, pour 1000 euros 32 Go > c'est trouvable... 8000 me semble très cher Tu m’as répondu en privé :-) Ok, mais tu fais quoi avec ce serveur ? On parle de config matérielle sans se

Re: [HS] recherche interface web wysiwyg

*Bonjour*, Le 13/10/2015 11:37, honeyshell a écrit : > Je recherche une alternative libre pour la création de site web en page > statique ... sitecake http://sitecake.com/ Une série de fichiers à envoyer vers un hébergement et c'est prêt pour y mettre du contenu -- JC Etiemble

Re: Solution de surveillance (monitoring) sur Debian Jessie

Le 14/10/15 à 17:17, Gael a écrit : G> Bonjour, G> G> Au vu du besoin exposé, et même si mon vote irai pour Zabbix, je te propose d'ajouter cacti G> à tes test. C'est dispo dans les dépôts, c'est correctement maintenu et ça fait le taf G> demandé. AMHA, pour un parc de 10

Re: [OT] Grafear chequeos nagios personalizados

El día 8 de octubre de 2015, 17:48, Maykel Franco escribió: > El día 7 de octubre de 2015, 16:24, Camaleón escribió: >> El Wed, 07 Oct 2015 09:50:17 +0200, Maykel Franco escribió: >> >>> Hola buenas, finalmente me he decantado por usar nagios a pelo y

Re: [RESOLU] recherche conseil ou retour d'expérience sur parc info école primaire

> Le 15 oct. 2015 à 15:05, daniel huhardeaux a écrit : > > Le 15/10/2015 14:20, Christophe DE NATALE a écrit : >> [...] >>> Christophe, >>> >>> Attention ! ! ! : >>> >>> [RESOLU] : pas tout à fait :-) >>> >>> Aucune école de la Seine Saint Denis n'a déboursé >>> 8000€ TTC

Re: problemas con nouveau en testing

El Wed, 14 Oct 2015 21:40:32 -0300, Gonzalo Rivero escribió: > Holas el lunes actualicé mi testing y seguí trabajando, luego apagué y > por causas que no vienen al caso recién ahora vuelvo a encender esta > computadora. > Lo primero que me llamó la atención es que no se ve por las dos >

Re: direct ethernet connection between computer and printer

Quoting Brian (a...@cityscape.co.uk): > On Thu 15 Oct 2015 at 14:53:16 +0300, Reco wrote: > > > On Thu, Oct 15, 2015 at 02:54:31AM -0500, rlhar...@oplink.net wrote: > > > > > > I brought the printer (and the laptop) back here. I installed tcpdump. I > > > see no requests to 0.0.0.0 udp port

Re: Putting apt-listchanges and dpkg output in mail sent by unattended-upgrades

Quoting moxalt (mox...@riseup.net): > On Tue, 13 Oct 2015 19:22:55 +0200, Ondřej Grover > wrote: > > It wouldn't be an overkill if there was a simple way to manage a local > > repository and packages with custom modifications. I have looked around and > > it didn't seem

Re: direct ethernet connection between computer and printer

On Thu 15 Oct 2015 at 14:53:16 +0300, Reco wrote: > On Thu, Oct 15, 2015 at 02:54:31AM -0500, rlhar...@oplink.net wrote: > > > > I brought the printer (and the laptop) back here. I installed tcpdump. I > > see no requests to 0.0.0.0 udp port 67. > > So the printer uses statically assinged IP.

Re: ¿Problemas con extensión Openweather de Gnome?

El Wed, 14 Oct 2015 21:28:02 -0300, Gonzalo Rivero escribió: > El mié, 14-10-2015 a las 20:43 +0200, Eduardo Rios escribió: >> Hace unos días se me actualizó la extensión Openweather de Gnome, que >> poco a poco se están actualizando los paquetes de gnome a la versión >> 3.18. >> >> Hablo de

Re: Graphical tools for traffic analysis

On Tue, 13 Oct 2015 14:11:29 -0300 Daniel Bareiro wrote: > Hi all! > > I'd like to know your experience based on these tools and what you can > recommend me. > > Specifically I would like some sort of web tool to interact with Squid > and, moreover, have some graphical

Re: direct ethernet connection between computer and printer

On Thu, October 15, 2015 3:01 pm, rlhar...@oplink.net wrote: > My only experience with routers has been with a PC running IPCop, but I > understand that there are small firmware-based routers, which I suppose > include a firewall and DHCP server. Have you any recommendations as to > brand and

Re: direct ethernet connection between computer and printer

On Thu 15 Oct 2015 at 21:44:56 +0100, Lisi Reisz wrote: > On Thursday 15 October 2015 21:38:16 Brian wrote: > > No you don't. You only have change the printers's setup to match the > > network it is on. You know how to do that with telnet. > > Brian - > > Could you give some hints as to how two

Re: direct ethernet connection between computer and printer

Hi. On Thu, 15 Oct 2015 15:01:01 -0500 rlhar...@oplink.net wrote: > On Thu, October 15, 2015 6:53 am, Reco wrote: > > Attach Ethernet cable to your laptop and printer via switch. > > > > Ensure that NetworkManager ignores your laptop's Ethernet interface > > (eth0 for simplicity). > > > > Run

Re: direct ethernet connection between computer and printer

On Thu, 15 Oct 2015 23:57:13 +0300 Reco wrote: > Stay away from anything made by Cisco. Good models are expensive as > (and require special training). Cheap > models are spyware-ridden. > Stay away from anything made by D-Link. Those people are unable to > design

Re: Criando LiveCD do Debian

http://live-systems.org/ Dá uma lida no manual. É bem simples de usar. Em 15 de outubro de 2015 21:05:49 BRT, Carlos Donizete Froes escreveu: > > >Ola, > >Antigamente há uns 5 anos atrás, usava muito o programa remastersys pra >customizar o Ubuntu já com programas

Re: Criando LiveCD do Debian

Os DVDs do debian não resolvem o problema? On 15-10-2015 21:05, Carlos Donizete Froes wrote: > > Ola, > > Antigamente há uns 5 anos atrás, usava muito o programa remastersys > pra customizar o Ubuntu já com programas necessários instalados e > todas atualizações do sistema para os clientes sem

Re: Unable to Install Stretch on Laptop, not Loading iwlwifi

On Thu, Oct 15, 2015 at 08:28:14AM +0300, moxalt wrote: > On Tue, 13 Oct 2015 12:21:16 -0700 (PDT), ray wrote: > > > The above reference was for the 'free' version. I have not been able to get > > the non-free to boot. I have wiped the Win OS and now it just says no > >

Re: Warsaw

Boa noite amigos, Eu acho que deve ser isso que o Antônio disse. É bem provável.  Richard Antunes Tecnólogo em Metalurgia Em Quinta-feira, 15 de Outubro de 2015 9:44, Adiel de Lima Ribeiro escreveu: Srs, não sei se é o caso do Warsaw, mas alguns

Re: problemas con nouveau en testing

El día 15 de octubre de 2015, 6:26, Manolo Díaz escribió: > El jueves, 15 oct 2015 a las 00:40 UTC > Gonzalo Rivero escribió: > > >> [27.212] (II) LoadModule: "nouveau" >> [27.213] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so >> [27.463] (II) Module

[SOLVED] [OT] Has my e-mail account been hacked?

On Tue, 13 Oct 2015 04:15:21 -0400 (EDT), Jochen Spieker wrote: > > It looks like the mail was delivered directly through > smtp02.wow.cmh.synacor.com by a user who successfully authenticated > using the username thecoughingcanary. On Wed, 14 Oct 2015 05:04:55 -0400 (EDT), Brian

Re: direct ethernet connection between computer and printer

On Thu, October 15, 2015 5:11 pm, Brian wrote: > An ISP hands out an address in a private range and it is assigned to the > external interface of a router? I do not understand this but know I have > much to learn about networking. Any enlightenment in the offing? No; in the present (original)

Re: fstab entry for a 3.6TB drive

Darac Marjal writes: > On Thu, Oct 15, 2015 at 01:52:37PM +0100, Sharon Kimble wrote: >> >> I'm trying to mount a 3.6TB hard drive formatted and labelled with >> gparted, and I have twice managed to lock myself out of the computer >> until I removed the offending line

Re: Criando LiveCD do Debian

De uma procurada no google por systemback. Deve servir pro q quer fazer. Enviado do meu iPhone > Em 15/10/2015, às 22:26, Semspam escreveu: > > Os DVDs do debian não resolvem o problema? > >> On 15-10-2015 21:05, Carlos Donizete Froes wrote: >> Ola, >> >>

Criando LiveCD do Debian

Ola, Antigamente há uns 5 anos atrás, usava muito o programa remastersys pra customizar o Ubuntu já com programas necessários instalados e todas atualizações do sistema para os clientes sem precisar usar a internet. Agora tem um cliente antigo que ainda esta usando o Ubuntu 10.04 que tinha

Re: systemd alternative for Jessie?

You say potato, I say, potato, ... On Thu, Oct 15, 2015 at 2:56 PM, Mart van de Wege wrote: > Alex Moonshine writes: > >> On Wed, 14 Oct 2015 07:49:08 -0500 >> Richard Owlett wrote: >> >>> What has the end-user, with a single

Re: fstab entry for a 3.6TB drive

On 10/15/15, Sharon Kimble wrote: > Darac Marjal writes: > >> Also, does /back-a exist (mount won't create the mountpoint itself, so >> your root filesystem should have a "back-a" directory entry)? >> > Thanks Darac. > > This is what I've

Re: problemas con nouveau en testing

salió al privado por error :-/ estúpidos webmail El día 15 de octubre de 2015, 10:49, Camaleón escribió: > El Wed, 14 Oct 2015 21:40:32 -0300, Gonzalo Rivero escribió: > >> Holas el lunes actualicé mi testing y seguí trabajando, luego apagué y >> por causas que no vienen al

Re: make system boot straight to browser connection

On Thu, Oct 15, 2015 at 5:29 PM, Richard Owlett wrote: > Richard Owlett wrote: >> >> [snip] >> >> How to do an autologin? In a DE independent way? >> >> http://manpages.debian.org/cgi-bin/man.cgi?query=autologin=1 >> gave no relevant links. >> >> A Google search gave only

Re: direct ethernet connection between computer and printer

On Thu, October 15, 2015 5:27 pm, Felix Miata wrote: > An internet router with wireless turned off and no connection to a WAN > nevertheless remains a functional switch. Thus "unconnected" it should > function no differently than the ethernet switch mentioned in your OP. Perhaps I do not

Re: [RESOLU] recherche conseil ou retour d'expérience sur parc info école primaire

> Le 15 oct. 2015 à 21:49, Thierry Granier a écrit : > > Bonjour a tous, > > je ne connaissais pas Ryxéo avant cette discussion et je suis donc allé faire > un tout sur leur site. > Mon expérience dans ce domaine me dit que cette societe a reussi à signer un > contrat

Re: direct ethernet connection between computer and printer

Reco a écrit : > > You do not need to guess here. Run tcpdump at your laptop, power cycle > the printer. As long as you see requests to 0.0.0.0 udp port 67 - the > printer uses DHCP for configuration. /To/ 0.0.0.0 ? AFAIK, 0.0.0.0 is not a valid destination address, and DHCP requests are sent to

Re: direct ethernet connection between computer and printer

On Thu 15 Oct 2015 at 22:10:43 +0100, Joe wrote: > On Thu, 15 Oct 2015 21:58:21 +0100 > Brian wrote: > > > On Thu 15 Oct 2015 at 21:44:56 +0100, Lisi Reisz wrote: > > > > > On Thursday 15 October 2015 21:38:16 Brian wrote: > > > > No you don't. You only have change the

Re: direct ethernet connection between computer and printer

On Thu, October 15, 2015 4:03 pm, Joe wrote: > Pretty much any of the well-known names should be OK, ... Thanks, Joe. I am saving this email for the next time I need a router. Russ

Re: direct ethernet connection between computer and printer

On Thursday 15 October 2015 21:38:16 Brian wrote: > No you don't. You only have change the printers's setup to match the > network it is on. You know how to do that with telnet. Brian - Could you give some hints as to how two separate devices can share one IP without some sort of routing? Lisi

Re: direct ethernet connection between computer and printer

On Thu, October 15, 2015 3:59 pm, David Wright wrote: > Quoting rlhar...@oplink.net (rlhar...@oplink.net): >> And it turns out (according to the ISP out there) that my associate is >> receiving via a radio link a single address (192.168.100.3) from the >> DHCP server of the ISP. > If you really

Re: direct ethernet connection between computer and printer

On Thu, October 15, 2015 2:42 pm, Doug wrote: > It should be easy to change, following instructions that came > with the printer. But that is the essence of the problem! The instructions which came with the printer (which are buried in a HP2100TN user manual which I found on line) end with the

Re: direct ethernet connection between computer and printer

On Thursday 15 October 2015 21:58:21 Brian wrote: > On Thu 15 Oct 2015 at 21:44:56 +0100, Lisi Reisz wrote: > > On Thursday 15 October 2015 21:38:16 Brian wrote: > > > No you don't. You only have change the printers's setup to match the > > > network it is on. You know how to do that with telnet.

Re: direct ethernet connection between computer and printer

rlhar...@oplink.net composed on 2015-10-15 17:06 (UTC-0500): > I have read numerous articles on security and I think that I understand > the issues. However, I need a solution, if possible, by tomorrow. The > WRT110 is here on my desk; it works and costs me nothing. An internet router with

Re: direct ethernet connection between computer and printer

On Thu 15 Oct 2015 at 15:01:01 -0500, rlhar...@oplink.net wrote: > On Thu, October 15, 2015 6:53 am, Reco wrote: > > Attach Ethernet cable to your laptop and printer via switch. > > > > Ensure that NetworkManager ignores your laptop's Ethernet interface > > (eth0 for simplicity). > > > > Run (as

Re: direct ethernet connection between computer and printer

On Thu, 15 Oct 2015 21:53:29 +0200 Pascal Hambourg wrote: > Reco a écrit : > > > > You do not need to guess here. Run tcpdump at your laptop, power cycle > > the printer. As long as you see requests to 0.0.0.0 udp port 67 - the > > printer uses DHCP for configuration. >

Re: direct ethernet connection between computer and printer

Quoting rlhar...@oplink.net (rlhar...@oplink.net): > On Thu, October 15, 2015 6:53 am, Reco wrote: > > Attach Ethernet cable to your laptop and printer via switch. > > > > Ensure that NetworkManager ignores your laptop's Ethernet interface > > (eth0 for simplicity). > > > > Run (as root): > > > >

No monitor in GNOME Control Center - Color

In the color management module I don't have any monitor listed since some days. I have some printers thought. My display ICC is still loaded when I logged on GNOME Shell, but I cannot access it nor change it. Note that I'm using GNU/Debian sid, so GNOME Shell 3.18. Am I the only one? Any idea

Re: Hung on reboot/shutdown

Ok. I disable 'quiet' & 'splash' in grub. Then I killed X and tried to reboot||poweroff||halt. Last messages before hung: kvm: exiting hardware virtualization sd 0:0:0:0: [sda] Synchronizing SCSI cache PS: photo (sorrie for terrible quality):

Re: direct ethernet connection between computer and printer

On Thu, October 15, 2015 6:53 am, Reco wrote: > Attach Ethernet cable to your laptop and printer via switch. > > Ensure that NetworkManager ignores your laptop's Ethernet interface > (eth0 for simplicity). > > Run (as root): > > ip l s dev eth0 up ip a a dev eth0 192.168.1.200/24 > > "ping

Re: [RESOLU] Re: recherche conseil ou retour d'expérience sur parc info école primaire

Cordialement, Christophe De Natale > Le 15 oct. 2015 à 20:48, Nicolas Aldegheri a écrit : > > Le 15/10/2015 11:48, Christophe DE NATALE a écrit : >> >> @Nicolas Aldegheri : peux-tu stp m’indiquer quelle config matérielle du >> serveur LTSP vous avez utilisée // nombre

Re: direct ethernet connection between computer and printer

On Thu, 15 Oct 2015 21:58:21 +0100 Brian wrote: > On Thu 15 Oct 2015 at 21:44:56 +0100, Lisi Reisz wrote: > > > On Thursday 15 October 2015 21:38:16 Brian wrote: > > > No you don't. You only have change the printers's setup to match > > > the network it is on. You know

Re: direct ethernet connection between computer and printer

On Thu, October 15, 2015 4:24 pm, Reco wrote: >> Is this much of an issue, given that there is apparently nothing >> between Windows 8 and the outside world at the moment? A router more >> spyware-ridden than Windows? > But since OP has a freedom to choose, > why not choose a good thing instead of

Re: direct ethernet connection between computer and printer

On Thu, 15 Oct 2015 15:01:01 -0500 rlhar...@oplink.net wrote: > On Thu, October 15, 2015 6:53 am, Reco wrote: > > Attach Ethernet cable to your laptop and printer via switch. > > > > Ensure that NetworkManager ignores your laptop's Ethernet interface > > (eth0 for simplicity). > > > > Run (as

Re: direct ethernet connection between computer and printer

Hi. On Thu, 15 Oct 2015 22:12:58 +0100 Joe wrote: > On Thu, 15 Oct 2015 23:57:13 +0300 > Reco wrote: > > > > Stay away from anything made by Cisco. Good models are expensive as > > (and require special training). Cheap > > models are

Re: direct ethernet connection between computer and printer

On Thu 15 Oct 2015 at 22:10:43 +0100, Joe wrote: > On Thu, 15 Oct 2015 21:58:21 +0100 > Brian wrote: > > > > If the printer is to communicate with the computer it needs to have an > > IP like 192.168.100.3.201. Change its IP with telnet. A moment's job. > > > > I assume

Re: problemas con nouveau en testing

El viernes, 16 de octubre de 2015, a las 00:25 UTC Gonzalo Rivero escribió: > salió al privado por error :-/ estúpidos webmail > > El día 15 de octubre de 2015, 10:49, Camaleón escribió: > > El Wed, 14 Oct 2015 21:40:32 -0300, Gonzalo Rivero escribió: > > > >> Holas el lunes

claws-mail does not display menu-bar

I have two jessie systems. The one i'm typing this email on has a claws-mail with a menu bar, and the other does not. Both are running xfce. This seems like either a window manager thing. Every other app i've tested has a menu bar. ugh Any ideas ? thanks brian

Re: claws-mail does not display menu-bar

On Thu, 15 Oct 2015 21:16:47 -0700 wrote: > > The one i'm typing this email on has a claws-mail with a menu bar, and the > other does not. > ugh. press F12 that's horrible UI design. Menu bar goes away without a hint of how to get it back ? Brian

Re: problemas con nouveau en testing

El viernes, 16 de octubre de 2015, a las 00:23 UTC Gonzalo Rivero escribió: > El día 15 de octubre de 2015, 6:26, Manolo Díaz > escribió: > > El jueves, 15 oct 2015 a las 00:40 UTC > > Gonzalo Rivero escribió: > > > > > >> [27.212] (II) LoadModule: "nouveau" > >> [

Re: problemas con nouveau en testing

El 16/10/15 a las 02:25, Gonzalo Rivero escribió: (...) > Me tocará revisar porque no lo carga, o que no le gusta apt-get install xserver-xorg-video-nouveau En todo caso, revisa si tienes el fichero que bloquea los módulos de nouveau en /etc/modprobe.d/ -- Saludos de Santiago José López

Re: direct ethernet connection between computer and printer

Quoting rlhar...@oplink.net (rlhar...@oplink.net): > On Thu, October 15, 2015 3:59 pm, David Wright wrote: > > Quoting rlhar...@oplink.net (rlhar...@oplink.net): > >> And it turns out (according to the ISP out there) that my associate is > >> receiving via a radio link a single address

Re: [RESOLU] recherche conseil ou retour d'expérience sur parc info école primaire

On Thursday 15 October 2015 17:59:22 you wrote: > Mais je les ai déjà les deux mains dans le cambouis > (jusqu’aux pieds même), je t’invite à relire le fil 8-) > Voici copié/collé de mon premier message d’aujourd’hui : > * LTSP va être la solution que je vais retenir pour le serveur, > reste à

Re: [RESOLU] recherche conseil ou retour d'expérience sur parc info école primaire

Le 15/10/2015 18:34, andre_deb...@numericable.fr a écrit : On Thursday 15 October 2015 17:59:22 you wrote: Mais je les ai déjà les deux mains dans le cambouis (jusqu’aux pieds même), je t’invite à relire le fil 8-) Voici copié/collé de mon premier message d’aujourd’hui : * LTSP va être la

GNOME Color Manager 3.18

Depuis quelques jours je n'ai plus mon écran listé dans GNOME Color Manager. Le profil que j'ai chargé il y pas mal de temps est encore utilisé lors du lancement de GNOME Shell cependant. Mais du coup je ne peux plus le changer! Est-ce que je suis le seul? Pour info j'utilise GNU/Debian sid.

Re: direct ethernet connection between computer and printer

On 10/15/2015 07:53 AM, Reco wrote: On Thu, Oct 15, 2015 at 02:54:31AM -0500, rlhar...@oplink.net wrote: On Thu, October 15, 2015 1:30 am, Reco wrote: Did this 'configuration report' mention the netmask used by printer? What about printer's MAC? Yes; the title is "JetDirect Configuration

Re: [RESOLU] Re: recherche conseil ou retour d'expérience sur parc info école primaire

Bonjour a tous, je ne connaissais pas Ryxéo avant cette discussion et je suis donc allé faire un tout sur leur site. Mon expérience dans ce domaine me dit que cette societe a reussi à signer un contrat d'exclusivite avec l'education nationale et qu'ils peuvent donc dans ce cas, faire un peu

direct ethernet connection between computer and printer

Yesterday in the office of my associate, I tried without success to install a HP LaserJet 2100TN in a wired local area network (LAN) consisting of nothing but a i386 running Windows 8, a modem (which I think also is router) and an ethernet switch. Through Control Panel, I learned that the

  1   2   >