On Thu, Sep 26, 2019 at 05:34:02PM -0400, yoda woya wrote:
> when I use this, the binding fails:
> Port 2022
> #AddressFamily any
> ListenAddress x.x.x.x
> #ListenAddress ::
>
> but if I do , it binds it to the ip on boot
> Port 2022
> #AddressFamily any
> #ListenAddress x.x.x
> #ListenAddress ::
Bonjour,
Le vendredi 27 septembre 2019, Jérémy Prego a écrit...
> En effet, le pc se fige de façon aléatoire sans rien que ne soit écrit
> dans les logs ... Au moment ou le pc se fige, je ne fais rien qui
> demande une surcharge processeur / graphique, bref, je ne comprends
> vraiment
I've set up a new machine with Buster (my first foray, my other
machines are still running Stretch). It frequently locks up so
hard that I have to hit the reset button. It seems to happen when
scrolling a Notepad window in Windows XP, which is running under
VirtualBox 6.0.10 r132072.
The
On Wed 25 Sep 2019 at 18:12:25 (+0200), Sebastian Hyrwall wrote:
> On 2019-09-25 14:36, Dan Ritter wrote:
> > Sebastian Hyrwall wrote:
> >> Just a question. Is there anyone except me that thinks that autostarting
> >> processes after installation , via apt, is completely bonkers?
No, I think
Le 27/09/2019 à 00:33, Jérémy Prego a écrit :
> J'ai fais l'acquisition très récemment d'un nouveau pc portable dell g5
> 15 5587 en remplacement de mon ancien asus. Après avoir recopier la
> Debian de mon ancien pc et avoir fait le nécessaire concernant les
> firmware libre / non libre, tout
bonjour,
J'ai fais l'acquisition très récemment d'un nouveau pc portable dell g5
15 5587 en remplacement de mon ancien asus. Après avoir recopier la
Debian de mon ancien pc et avoir fait le nécessaire concernant les
firmware libre / non libre, tout fonctionne parfaitement, a une
exception près...
On Thu, Sep 26, 2019 at 05:34:02PM -0400, yoda woya wrote:
>when I use this, the binding fails:
>Port 2022
>#AddressFamily any
>ListenAddress x.x.x.x
>#ListenAddress ::
>but if I do , it binds it to the ip on boot
>Port 2022
>#AddressFamily any
>#ListenAddress
Le jeudi 26 septembre 2019 à 10:18 +0200, yamo' a écrit :
> La notion LTS Debian et Ubuntu n'est pas exactement la même.
>
> Sur Debian c'est un état, sur Ubuntu ça qualifie une version qui va
> être
> maintenue longtemps.
C'est même pas du tout la même chose. La "LTS" de Ubuntu correspond à
peu
Le jeudi 26 septembre 2019 à 15:39 +0200, Seb a écrit :
> Sauriez-vous comment faire retomber killall en marche ?
Moi j'aime bien la commande pkill qui pourrait faire l'affaire, non ?
On Thursday 26 September 2019 17:25:11 Greg Wooledge wrote:
> On Thu, Sep 26, 2019 at 05:08:26PM -0400, Gene Heskett wrote:
> > On Thursday 26 September 2019 16:44:01 Greg Wooledge wrote:
> > > On Thu, Sep 26, 2019 at 04:42:15PM -0400, Gene Heskett wrote:
> > > > And here I am, to announce that
Greg Wooledge wrote:
> On Thu, Sep 26, 2019 at 05:08:26PM -0400, Gene Heskett wrote:
>> On Thursday 26 September 2019 16:44:01 Greg Wooledge wrote:
>>
>> > On Thu, Sep 26, 2019 at 04:42:15PM -0400, Gene Heskett wrote:
>> > > And here I am, to announce that my wintel boxes will only be updated
>>
when I use this, the binding fails:
Port 2022
#AddressFamily any
ListenAddress x.x.x.x
#ListenAddress ::
but if I do , it binds it to the ip on boot
Port 2022
#AddressFamily any
#ListenAddress x.x.x
#ListenAddress ::
How can i fix this. I want sshd to run only on this one IP
Je ne me souviens pas avoir fait de paramétrage de la freebox pour cela. As-tu
le même problème avec un flux réseau simple, par exemple une vidéo Youtube
(https://www.youtube.com/watch?v=t6wjCcWC2aE) ? Si oui ton problème ne vient
pas du bouquet Free, sinon je ne vois pas ce que ça peut être.
On Thu, Sep 26, 2019 at 05:08:26PM -0400, Gene Heskett wrote:
> On Thursday 26 September 2019 16:44:01 Greg Wooledge wrote:
>
> > On Thu, Sep 26, 2019 at 04:42:15PM -0400, Gene Heskett wrote:
> > > And here I am, to announce that my wintel boxes will only be updated
> > > to stretch because there
La commande qui va bien :
# kill -9
On Thursday 26 September 2019 22:01:41 Étienne Mollier wrote:
> > ~>killall simplescreenrecorder
> > simplescreenrecorder: no process found
> > ~>killall -e simplescreenrecorder
> > simplescreenrecorder: no process found
> $ killall simplescreenrec
>
On Thursday 26 September 2019 16:44:01 Greg Wooledge wrote:
> On Thu, Sep 26, 2019 at 04:42:15PM -0400, Gene Heskett wrote:
> > And here I am, to announce that my wintel boxes will only be updated
> > to stretch because there is not a buster compatible LCNC available
> > yet. That I suspect will
On Thu, Sep 26, 2019 at 04:42:15PM -0400, Gene Heskett wrote:
> And here I am, to announce that my wintel boxes will only be updated to
> stretch because there is not a buster compatible LCNC available yet.
> That I suspect will be a while as switching to python-3.7, and to
> wayland will take
On Wednesday 25 September 2019 17:15:56 Gene Heskett wrote:
> On Wednesday 25 September 2019 15:57:47 Greg Wooledge wrote:
> > On Wed, Sep 25, 2019 at 03:51:39PM -0400, Gene Heskett wrote:
> > > Neither of these links adresses the 2 main problems, wrong
> > > networking setup after the first
Le Thu, 26 Sep 2019 14:15:32 +0200 (CEST),
Jean Bernon a écrit :
> J'utilise VLC régulièrement pour regarder les chaînes du bouquet
> Free. J'ai abandonné freetux depuis longtemps. Sur VLC tu choisis
> "Media" "Ouvrir un flux réseau" ou plus directement Ctrl+N et tu
> entres l'adresse suivante
>
Seb, au 2019-09-26 :
> Le passage de Debian 9 à Debian 10 semble avoir modifié le
> comportement de killall. Exemple:
>
> ~>ps auxw | grep simplescreen
> seb 13630 2.3 0.7 393012 64192 pts/31 Sl+ 15:31 0:00
> simplescreenrecorder
>
> ~>killall simplescreenrecorder
>
David Parker wrote:
> This issue seems to not be fixed entirely, after all. Yesterday, the
> earbuds would pair but not connect when I powered them on. I had to
> connect them manually each time, using either bluetoothctl or
> blueman-manager. At one point they disconnected, and subsequent
Pascal Hambourg, au 2019-09-26 :
> Le 26/09/2019 à 17:09, Sébastien NOBILI a écrit :
[...]
> > 26 septembre 2019 16:40 "Matthieu GIRARD-COLIN" a
> > écrit:
> > > Logiquement le problème viendrais donc du lien symbolique
> > > mais il s'agit d'un fichier protégé en écriture même pour
> > > root
Buenas,
a ver si esta buscando ayuda no empieces con un "Vas muerto" que le vas
a meter el susto en el cuerpo xD
al tema: lo que planteas es un problema porque funcionara cuando funcione y
como funcione, es lo que tiene tener windows de por medio.
Algo que podrias probar es alguna opcion
Le 26/09/2019 à 17:09, Sébastien NOBILI a écrit :
26 septembre 2019 16:40 "Matthieu GIRARD-COLIN" a écrit:
Oui ce message est présent et le lien symbolique existe que le disque soit
branché ou non,
toutefois il est cassé
# ls -l /sys/class/block/
lrwxrwxrwx 1 root root 0 sept. 26 15:06 sda
This issue seems to not be fixed entirely, after all. Yesterday, the
earbuds would pair but not connect when I powered them on. I had to
connect them manually each time, using either bluetoothctl or
blueman-manager. At one point they disconnected, and subsequent attempts
to reconnect them
Hi.
On Thu, Sep 26, 2019 at 09:39:38AM -0700, pe...@easthope.ca wrote:
> Now when a window is minimized, nothing visible remains. I don't know
> how to retrieve it. I must have clicked a configuration button
> inadvertently but haven't found it. Tips?
Right click on a panel, select
Hi,
This refers to the LXDE desktop.
Until recently, minimization of a window left a small button in the
system panel or bar (whatever is the correct term) at the bottom of
the display. A click on the button would open the window again.
Now when a window is minimized, nothing visible remains.
On 9/26/2019 1:00 PM, Paynalton wrote:
Si un ave no rompe su huevo morirá antes de nacer.
Nosotros somos el ave y el mundo es nuestro huevo.
POR LA REVOLUCIÓN DEL MUNDO
Ciudad de México
El jue., 26 sept. 2019 a las 11:54, Eriel Perez
(mailto:erielperezg...@gmail.com>>) escribió:
Si un ave no rompe su huevo morirá antes de nacer.
Nosotros somos el ave y el mundo es nuestro huevo.
POR LA REVOLUCIÓN DEL MUNDO
Ciudad de México
El jue., 26 sept. 2019 a las 11:54, Eriel Perez ()
escribió:
>
> On 9/26/2019 12:07 PM, Paynalton wrote:
>
>
> Si un ave no rompe su huevo
On 9/26/2019 12:07 PM, Paynalton wrote:
Si un ave no rompe su huevo morirá antes de nacer.
Nosotros somos el ave y el mundo es nuestro huevo.
POR LA REVOLUCIÓN DEL MUNDO
Ciudad de México
El jue., 26 sept. 2019 a las 10:55, Eriel Perez
(mailto:erielperezg...@gmail.com>>) escribió:
Merci, mais, je ne trouve pas de liste de flux la également.
Il s'agit de la configuration pour Orange, qui se fait depuis
l'interface client, hors, je n'ai pas les accès, mes parents ne me
laissent pas avoir accès à ses configurations, je suis donc limité
également pour le SSH, les redirections
Ok je connais depuis quelque longs mois maintenant, mais, on ne retrouve
pas les flux, avec Molotov, si ?
Par contre, j'ai constaté dans le fichier que j'ai indiqué plus bas, je
ne pensais avoir que 5 chaînes, mais, non, chaque fichier possède de
nombreux flux.
Ainsi, il y avait une dizaine de
Si un ave no rompe su huevo morirá antes de nacer.
Nosotros somos el ave y el mundo es nuestro huevo.
POR LA REVOLUCIÓN DEL MUNDO
Ciudad de México
El jue., 26 sept. 2019 a las 10:55, Eriel Perez ()
escribió:
>
> On 9/26/2019 11:06 AM, Paynalton wrote:
>
>
> Si un ave no rompe su huevo
On 9/26/2019 11:06 AM, Paynalton wrote:
Si un ave no rompe su huevo morirá antes de nacer.
Nosotros somos el ave y el mundo es nuestro huevo.
POR LA REVOLUCIÓN DEL MUNDO
Ciudad de México
El jue., 26 sept. 2019 a las 9:44, Eriel Perez
(mailto:erielperezg...@gmail.com>>) escribió:
26 septembre 2019 16:40 "Matthieu GIRARD-COLIN" a écrit:
> Oui ce message est présent et le lien symbolique existe que le disque soit
> branché ou non,
> toutefois il est cassé
>
> # ls -l /sys/class/block/
> lrwxrwxrwx 1 root root 0 sept. 26 15:06 sda ->
>
Si un ave no rompe su huevo morirá antes de nacer.
Nosotros somos el ave y el mundo es nuestro huevo.
POR LA REVOLUCIÓN DEL MUNDO
Ciudad de México
El jue., 26 sept. 2019 a las 9:44, Eriel Perez ()
escribió:
> Saludos lista.
>
> Necesito implementar el plugins BarCode en GLPI.
>
> Alguno de
Saludos lista.
Necesito implementar el plugins BarCode en GLPI.
Alguno de ustedes ha podido echar andar este plugins. lo instalo y no da
error. pero como imprimo el barcode mas como lo asocio al asset?
Cualquier ayuda por favo, gracias.
Instale:
Le 26/09/2019 à 15:12, Sébastien NOBILI a écrit :
Bonjour,
26 septembre 2019 13:43 "Matthieu GIRARD-COLIN" a écrit:
Sep 26 09:28:44 Iznogood kernel: [148803.790117] sysfs: cannot create duplicate
filename
'/class/block/sdb1'
Est-ce que ce message est présent à chaque branchement du disque
El 26/9/19 a las 11:05, Centro Patrimonio Pinar del Río escribió:
Hola lista, uso debian 9 cinnamon. Tengo varios usuarios que trabajan en
la misma estación de trabajo que dispone de particiones ntfs (por
motivos de trabajo) Alguien puede pasarme alguna *interfaz gráfica* para
dar permisos de
Hola lista, uso debian 9 cinnamon. Tengo varios usuarios que trabajan en
la misma estación de trabajo que dispone de particiones ntfs (por
motivos de trabajo) Alguien puede pasarme alguna *interfaz gráfica* para
dar permisos de escritura-lectura, etc de mis usuarios ... o sea que el
usuario
Pour Orange on trouve une playlist à charger sur cette page
https://www.porciello.com/inventel/tv_vlc.htm
Mais je n'ai pas testé, puisque je ne suis pas chez Orange
- Mail original -
> De: "G2PC"
> À: debian-user-french@lists.debian.org
> Envoyé: Jeudi 26 Septembre 2019 15:11:07
>
Bonjour,
Le passage de Debian 9 à Debian 10 semble avoir modifié le comportement de
killall. Exemple:
~>ps auxw | grep simplescreen
seb 13630 2.3 0.7 393012 64192 pts/31 Sl+ 15:31 0:00
simplescreenrecorder
~>killall simplescreenrecorder
simplescreenrecorder: no process found
https://www.molotov.tv/
Le 26/09/2019 à 15:11, G2PC a écrit :
Je suis sur Orange, mais, dans l'absolu, je pense qu'il faudrait trouver
des flux qui ne dépendent pas du FAI. Ton adresse ne fonctionne pas pour
moi.
Sur le site :
https://www.iptv4sat.com/dl-france-iptv/
Depuis le fichier :
Bonjour,
26 septembre 2019 13:43 "Matthieu GIRARD-COLIN" a écrit:
> Sep 26 09:28:44 Iznogood kernel: [148803.790117] sysfs: cannot create
> duplicate filename
> '/class/block/sdb1'
Est-ce que ce message est présent à chaque branchement du disque ?
Si oui, le lien symbolique
Je suis sur Orange, mais, dans l'absolu, je pense qu'il faudrait trouver
des flux qui ne dépendent pas du FAI. Ton adresse ne fonctionne pas pour
moi.
Sur le site :
https://www.iptv4sat.com/dl-france-iptv/
Depuis le fichier :
I changed the background gdm picture in greeter.dconf-defaults and ran
dpkg-reconfigure gdm3 but I still have that horrible gray thing.
here's my /etc/gdm3/greeter.dconf-defaults
# These are the options for the greeter session that can be set
# through GSettings. Any GSettings setting that
On Thu, Sep 26, 2019 at 08:45:45AM -0400, Greg Wooledge wrote:
> On Thu, Sep 26, 2019 at 08:34:18AM -0400, Roberto C. Sánchez wrote:
> > On Thu, Sep 26, 2019 at 12:19:41PM +, c...@riseup.net wrote:
> > > drwx-- 2 root root 12K Jul 22 12:57 lost+found/
> >
> > This entry is concerning. A
On Thu, Sep 26, 2019 at 08:34:18AM -0400, Roberto C. Sánchez wrote:
> On Thu, Sep 26, 2019 at 12:19:41PM +, c...@riseup.net wrote:
> > drwx-- 2 root root 12K Jul 22 12:57 lost+found/
>
> This entry is concerning. A typical directory shows up as taking 4 KB.
> For it to take up more it
On Thu, Sep 26, 2019 at 08:11:14AM -0400, Roberto C. Sánchez wrote:
> On Thu, Sep 26, 2019 at 11:58:28AM +, c...@riseup.net wrote:
> >
> > ~> dpkg -l | grep linux
> > ii binutils-x86-64-linux-gnu 2.31.1-16
> > amd64GNU binary utilities, for x86-64-linux-gnu target
> > ii
On Thu, Sep 26, 2019 at 12:19:41PM +, c...@riseup.net wrote:
> > >
> Now the output is the following and hopefull, my computer will be able
> to restart and Wifi will work after having removed the kernel.
>
> df -h
> FilesystemSize Used Avail Use% Mounted on
> udev
On Thu, Sep 26, 2019 at 02:08:33PM +0200, Renato Gallo wrote:
> This email read confirmation is really annoying
>
I used other people's email setting files and have not figured out how
to turn it off yet. If you find it so annoying, why have you not turned
read confirmation off your email
> Date: Thu, 26 Sep 2019 12:16:58 +
> From: c...@riseup.net
> To: "Roberto C. Sánchez" , debian-user@lists.debian.org
> Subject: Re: Debian Buster update error
>
> On Thu, Sep 26, 2019 at 08:11:14AM -0400, Roberto C. Sánchez wrote:
> > On Thu, Sep 26, 2019 at 11:58:28AM +,
Hello,
Je n'y ai pas passé beaucoup de temps mais j'ai la nette impression qu'avec
une unique instance de dnsmasq, je ne peux réserver la résolution de toto
en 1.2.3.4 aux seuls utilisateurs d'une interface réseau.
Je peux en revanche avec local-queries, faire que foobar soit résolu en
J'utilise VLC régulièrement pour regarder les chaînes du bouquet Free. J'ai
abandonné freetux depuis longtemps.
Sur VLC tu choisis "Media" "Ouvrir un flux réseau" ou plus directement Ctrl+N
et tu entres l'adresse suivante
http://mafreebox.freebox.fr/freeboxtv/playlist.m3u
C'est fait ! Tu es
On Thu, Sep 26, 2019 at 11:58:28AM +, c...@riseup.net wrote:
>
> ~> dpkg -l | grep linux
> ii binutils-x86-64-linux-gnu 2.31.1-16
> amd64GNU binary utilities, for x86-64-linux-gnu target
> ii console-setup-linux1.193~deb10u1
> all Linux
This email read confirmation is really annoying
Renato Gallo
- Original Message -
From: c...@riseup.net
To: "debian-user"
Sent: Thursday, September 26, 2019 1:58:28 PM
Subject: Re: Debian Buster update error
On Thu, Sep 26, 2019 at 07:59:21AM -0400, Roberto C. Sánchez wrote:
> On
On Thu, Sep 26, 2019 at 07:59:21AM -0400, Roberto C. Sánchez wrote:
> On Thu, Sep 26, 2019 at 11:48:30AM +, c...@riseup.net wrote:
> > On Thu, Sep 26, 2019 at 01:50:51PM +0200, steve wrote:
> > > Le 26-09-2019, à 11:36:33 +, c...@riseup.net a écrit :
> > >
> > > >
> > > > After applying
On Thu, Sep 26, 2019 at 11:48:30AM +, c...@riseup.net wrote:
> On Thu, Sep 26, 2019 at 01:50:51PM +0200, steve wrote:
> > Le 26-09-2019, à 11:36:33 +, c...@riseup.net a écrit :
> >
> > >
> > > After applying your solution, it still does not work and gives me the
> > > following error
> >
On Thu, Sep 26, 2019 at 01:50:51PM +0200, steve wrote:
> Le 26-09-2019, à 11:36:33 +, c...@riseup.net a écrit :
>
> >
> > After applying your solution, it still does not work and gives me the
> > following error
> >
> > apt-get autoremove
> > Reading package lists... Done
> > Building
Le 26-09-2019, à 11:36:33 +, c...@riseup.net a écrit :
After applying your solution, it still does not work and gives me the
following error
apt-get autoremove
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to
CalDav est le standard pour les échanges d'agenda et contact via web.
si tu veux des infos
https://fr.wikipedia.org/wiki/CalDAV
slts
Le 26/09/2019 à 13:03, bas...@starynkevitch.net a écrit :
On Thursday, September 26, 2019 11:37 CEST, Bruno Volpi
wrote:
bonjour,
le dois récupérer des
Simple, je révise mes connaissances de l'existant.
Je reprend mes notes sur mon wiki.
J'améliore la partie multimédia.
Cette thématique est délaissée, donc, je ne sais pas comment les
programmes et les projets évoluent.
Certes je sais que VLC fait la même chose, mais, je ne l'exploite pas,
donc,
On Thu, Sep 26, 2019 at 10:17:15AM +0200, to...@tuxteam.de wrote:
> On Thu, Sep 26, 2019 at 07:55:36AM +, c...@riseup.net wrote:
> > Hi,
> > When update buster, it gives the following errors:
> >
> > Setting up linux-image-4.19.0-6-amd64 (4.19.67-2+deb10u1) ...
> >
Bonjour,
Suite à un reformatage d'un disque dur externe Buffalo vers un
système de fichier ext4, sur certaines machines il est devenu impossible
de monter le volume. Toutefois sur une autre machine debian10 il n'y a
aucun problème. Cela fait suite à un reformatage du disque, tout
On Thu, 2019-09-26 at 07:55 +, c...@riseup.net wrote:
> Hi,
> When update buster, it gives the following errors:
>
> Setting up linux-image-4.19.0-6-amd64 (4.19.67-2+deb10u1) ...
> /etc/kernel/postinst.d/initramfs-tools:
> update-initramfs: Generating /boot/initrd.img-4.19.0-6-amd64
>
>
Pourquoi réinstalles-tu Freetux TV. Il me semble que VLC fait la même chose en
mieux.
- Mail original -
> De: "G2PC"
> À: "Liste Debian"
> Envoyé: Jeudi 26 Septembre 2019 13:33:41
> Objet: Free Tux TV - Quels codecs ?
> Je viens de tenter de réinstaller Free Tux TV mais, je n'ai que
Bonjour,
Certains programmes comme arpwatch peuvent en peu de temps générer une
grand quantité d'emails d'alertes.
Pour en faciliter le traitement, je me demande s'il existe des outils et/ou
une démarche pour les filter ou les regrouper.
Des pistes ?
Slts
Le jeu. 26 sept. 2019 à 09:38,
Je viens de tenter de réinstaller Free Tux TV mais, je n'ai que deux
chaines, ARTE et NRJ12.
L'image ne fonctionne pas pour ARTE, j'ai seulement le son.
Pour NRJ 12, le lien semble mort.
La base de données de FreeTuxTV : http://database.freetuxtv.net
Bonjour,
Il existe un client Nextcloud qui a pour particularité d'avoir été écrit avec
Qt. Si tu regardes son code source, il contient un répertoire src/libsync qui
est une bibliothèque. Je pense que c'est cette dernière que tu recherches.
Par contre, il faudra probablement lire le code du
On Thursday, September 26, 2019 11:37 CEST, Bruno Volpi
wrote:
bonjour,
le dois récupérer des fichiers type CalDav et carddav depuis un serveur
nextcloud dans une appli maison en QT / C++. J'ai donc besoin d'une lib.
Merci de donner une URL décrivant ce type de fichiers (je ne connais pas et
> Salut,
>
> G2PC a tapoté le 25/09/2019 16:50:
>> Je suis entrain de revoir la page de mon wiki concernant l'installation
>> de Debian.
>>
>> J'ai le lien suivant qui m'informe que la version LTS de Debian est
>> Debian Stretch.
>>
>> Buster n'est pas déjà devenu la version officielle LTS ?
>>
bonjour,
le dois récupérer des fichiers type CalDav et carddav depuis un serveur
nextcloud dans une appli maison en QT / C++. J'ai donc besoin d'une lib.
Si quelqu'un utilise ce type de lib je suis preneur de tout retour
d'expérience d'utilisation et d'installation.
slts.
To listen music under bash I always use cvlc from program vlc.
Maybe a other possibility.
Regards
Am 25.09.2019 um 17:24 schrieb Jean-Philippe MENGUAL:
Hello,
Since some Sid update (about 2 weeks), something may have happent in te
audio stack or the terminal because what worked no longer
Salut,
G2PC a tapoté le 25/09/2019 16:50:
> Je suis entrain de revoir la page de mon wiki concernant l'installation
> de Debian.
>
> J'ai le lien suivant qui m'informe que la version LTS de Debian est
> Debian Stretch.
>
> Buster n'est pas déjà devenu la version officielle LTS ?
>
> C'est
On Thu, Sep 26, 2019 at 07:55:36AM +, c...@riseup.net wrote:
> Hi,
> When update buster, it gives the following errors:
>
> Setting up linux-image-4.19.0-6-amd64 (4.19.67-2+deb10u1) ...
> /etc/kernel/postinst.d/initramfs-tools:
> update-initramfs: Generating /boot/initrd.img-4.19.0-6-amd64
>
Hi,
When update buster, it gives the following errors:
Setting up linux-image-4.19.0-6-amd64 (4.19.67-2+deb10u1) ...
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-4.19.0-6-amd64
gzip: stdout: No space left on device
E: mkinitramfs failure cpio 141 gzip 1
Hello,
J'ai installé Arpwatch sur un réseau (et le généraliserai probablement à
d'autres).
Il est configuré avec:
/etc/default/arpwatch:
# Global options for arpwatch(8).
# Debian: don't report bogons, don't use PROMISC.
ARGS="-N -p"
# Debian: run as `arpwatch' user. Empty this to run as root.
Hi,
Saurav Sarkar wrote:
> As the downloaded installation dvd is not working how can i install
> debian 10.0.0 ???
You could try with a USB stick.
See
https://www.debian.org/CD/faq/#write-usb
(On MS-Windows it seems that program Rufus in "dd" mode is currently the
best way to copy an image
[1] Catalogue Request
Professional LED lights suppliers with more than 5 years experience.
Customer customization Support.
Provision of procurement serivices.
Adelina Li
SHENZHEN LONGEN LIGHTING CO.,LTD.
Mob(wechat):0086 18938048066 Tel:0755-85088066
A2 Building,Xinbaoji industrial
Bonjour,
Le 25/09/2019 à 16:41, G2PC a écrit :
>
> Je suis entrain de revoir la page de mon wiki concernant
> l'installation de Debian.
>
> J'ai le lien suivant qui m'informe que la version LTS de Debian est
> Debian Stretch.
>
> Buster n'est pas déjà devenu la version officielle LTS ?
>
> C'est
80 matches
Mail list logo