El 2020-08-18 a las 12:29 -0700, Jose Alfonso escribió:
> El 17/8/20, Camaleón escribió:
> > El 2020-08-17 a las 03:17 -0700, Jose Alfonso escribió:
> >
> >> El 13/8/20, Jose Alfonso escribió:
> >> > Aun no he solucionado el problema, tengo que instalar un paquete *-dev
> >> > y no me quiere
Hello,
I'm just curious. According to general perception BSD, MIT or Apache2
licenses are GPL3 compatible.
Is it true ? I'm not lawyer, but with GPL requirement to cover whole
combined work with GPL it seems to be not so obvious.
That especially true for GPL3 where combined work must to be
In /etc/udev/rules.d/*, and, /lib/modprobe.d/aliases.conf, is the
correct name for sound devices "snd-usb-audio" or "snd_usb_audio"?
Thanks,
John
--
John Conover, cono...@rahul.net, http://www.johncon.com/
Olá!
Programo sobre GTK desde 98, com C/C++, atualmente com Python
também, desde 2008, no meu caso mais com Python 2.7 e Gtk2. Tenho alguns
trabalhos onde acabei criando um micro-framework para tal, o Pole [1].
Para construir a interface, você vai utilizar do Glade [2],
On 2020-08-18 11:27, Urs Thuermann wrote:
"Rick Thomas" writes:
The /dev/sdx names for devices have been unpredictable for quite a
while. Which one is sda and which sdb will depend on things like
timing -- which one gets recognized by the kernel first.
The best solution is to either use
Thanks for that. Maybe someone else can debug further. Have you tried
running any other desktop environments? Uninstall KDE and install Gnome to
check, maybe? Last and final easy thing to try: if you can get to a text
prompt: kill off the X server and lightdm and then run the startx command.
I
Camaleón ya no estoy trabajando con C++, sabes que lo estaba
estudiando pero no solucione el problema del SDL ni tampoco los de
gtk-dev , pienso estudiar java , que me dices al respecto ?
El 17/8/20, Camaleón escribió:
> El 2020-08-17 a las 03:17 -0700, Jose Alfonso escribió:
>
>> El 13/8/20,
On 8/18/20 1:27 AM, Andrew Cater wrote:
To the point where you got to the end of the text mode only install -
was it working in text mode when you rebooted?
Reboot was fine.
When you went to add the non-free firmware - was it working when you
rebooted?
Again, no issues with reboot.
When you
"Rick Thomas" writes:
> The /dev/sdx names for devices have been unpredictable for quite a
> while. Which one is sda and which sdb will depend on things like
> timing -- which one gets recognized by the kernel first.
>
> The best solution is to either use UUID or LABEL when you fsck
> and/or
Me esqueci de mandar o link no último e-mail, João. Aqui o Georges cria
um app com Javascript, mas as ferramentas também servem para as outras
linguagens, vc escolhe na hora de criar o projeto.
https://www.youtube.com/watch?v=RBg9an4Z0bE id="-x-evo-selection-start-marker">
Em ter, 2020-08-18 às
Então eu usaria o GNOME Builder mesmo. Se puder veja alguns vídeos do
Georges Stavracas desenvolvendo aplicaćões em GTK, ele usa o Builder e
mostra como é o build. Facilita bastante a sua vida.
Em ter, 2020-08-18 às 14:08 -0300, João Aguiar escreveu:
> A linguagens que pretendo usar seria o C/C++
A linguagens que pretendo usar seria o C/C++ e Python.
Em ter., 18 de ago. de 2020 às 13:53, João Aguiar
escreveu:
> Hello
>
> Gostaria de obter orientações para realizar a instalação do GTK mais
> recentes e com suas dependências no OS Debian Buster 10. Alguém com algum
> manual ?
>
> Att,
>
Olá. Você precisa do GTK mais recente para desenvolver algo ou para usar
algum programa?
Eu estudo desenvolvimento GTK no Buster, mas uso o GNOME Builder que baixa
as dependências e constrói a aplicação em um ambiente usando Flatpak.
Se fosse para usar um GTK mais recente, eu iria de Debian
Hello
Gostaria de obter orientações para realizar a instalação do GTK mais
recentes e com suas dependências no OS Debian Buster 10. Alguém com algum
manual ?
Att,
João Carlos.
On Tue, 18 Aug 2020 10:18:51 +0200
Grzesiek Sójka wrote:
> Hi there,
>
> To be more specific: I already installed Debian Sid and the tablet is HP
> Elite X2 1013 G3. I'm trying to learn how to use the modem mentioned to
> connect to the internet.
Disclaimer: I have no experience with this
Le 18/08/2020 à 11:46, Klaus Becker a écrit :
Le 17/08/2020 à 23:35, NoSpam a écrit :
Le 17/08/2020 à 22:40, Klaus Becker a écrit :
[...]
Si ton PC ne récupère pas d'adresse ipv6 c'est peut être qu'il n'est
pas configuré pour accepter cela. Fais un ip -6 a pour vérifier si
tu as une ipv6
Hi,
i wrote:
> > I only deem *UUID as safe,
Nicolas George wrote:
> UUID can get duplicated too. Just have somebody copy the whole block
> device with "good ol' dd".
Yes, sure. A HDD of mine got by the Debian installation 128 GPT slots of
128 bytes. So the primary GPT including "protective MBR"
On 8/17/20 9:01 PM, hobie of RMN wrote:
On 2020-08-17 16:42, hobie of RMN wrote:
Hi, All -
My brother has been issuing "mount /dev/sdb1" prior to backing up some
files to a second hard disk. He lately upgraded to 'testing', and it
appears (from result of running df) that what the system now
Le 17/08/2020 à 23:35, NoSpam a écrit :
Le 17/08/2020 à 22:40, Klaus Becker a écrit :
[...]
Si ton PC ne récupère pas d'adresse ipv6 c'est peut être qu'il n'est
pas configuré pour accepter cela. Fais un ip -6 a pour vérifier si tu
as une ipv6
Attention, avec IPv6 tu n'est plus protégé
Thomas Schmitt (12020-08-18):
> I only deem *UUID as safe, unless the same names on different devices
> are intented and always only one of those devices will be connected.
UUID can get duplicated too. Just have somebody copy the whole block
device with "good ol' dd".
Regards,
--
Nicolas
Hi,
didier gaumet wrote:
> give a name to the underlyning [GPT] partition
Let me add the hint that a GPT partition "name" is a user defined string
(in fstab and lsblk: PARTLABEL=) whereas the partition UUIDs in GPT
get handed out by partition editors automatically as random data
(human readable
On Mon, Aug 17, 2020 at 11:04:48PM -, Juan R. de Silva wrote:
> test
Well, it came through; and TIL gmane was operating a NNTP gateway again
that you can post to.
--
Jonathan Dowland
✎j...@debian.org
https://jmtd.net
Bonjour
Le 18/08/2020 à 01:38, era a écrit :
Je ne sais pas pourquoi sur Buster la version de Debian est incomplète?
C'est un Bug?
Aucune idée, ouvre un ticket.
$ lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 10 (buster)
On Mon, Aug 17, 2020, at 4:42 PM, hobie of RMN wrote:
> Hi, All -
>
> My brother has been issuing "mount /dev/sdb1" prior to backing up some
> files to a second hard disk. He lately upgraded to 'testing', and it
> appears (from result of running df) that what the system now calls
> /dev/sdb1 is
Hello,
Apparently, it is also possible to either:
- give a name to the filesystem (use e2label to do so, the filesystem being
ext4) and mount the filesystem by using this name as a parameter of the mount
command instead of /dev/sd* or an UUID
- give a name to the underlyning partition (use
Hi there,
To be more specific: I already installed Debian Sid and the tablet is HP
Elite X2 1013 G3. I'm trying to learn how to use the modem mentioned to
connect to the internet.
On Mon, 17 Aug 2020 23:04:48 - (UTC)
"Juan R. de Silva" wrote:
> test
>
If you're a new poster here, your posts may be lost or delayed for a
while.
--
Joe
On Mon, 17 Aug 2020 22:03:43 +
Semih Ozlem wrote:
> Can debian be installed or run from a machine with an intel atom
> processor specificall z7320
I don't know about the current ones, but I have an old Acer netbook with
a 32-bit N270 Atom which had no problems with Debian.
My more recent
On 8/18/2020 6:01 AM, hobie of RMN wrote:
On 2020-08-17 16:42, hobie of RMN wrote:
Hi, All -
My brother has been issuing "mount /dev/sdb1" prior to backing up some
files to a second hard disk. He lately upgraded to 'testing', and it
appears (from result of running df) that what the system now
On Mon, Aug 17, 2020 at 4:03 PM Jude DaShiell wrote:
> Not only that, using color to communicate anything is a violation of
> accessibility standards. Section 508 of the Americans With Disabilities
> states that specifically. That is one of 16 technical points along with
> the Preamble web
30 matches
Mail list logo
