Hello,
My ultimate goal is to get my Netgear FA311 card running on 2.2r2. I have
found some information on downloading and compiling a couple of modules
(pci-scan and natsemi) which other posts indicate should work. I've been
able to get these to compile, but when I try insmod on pci-scan, I
If you are using PAP add 'user username' to the 'pppd-options' line.
Pppd will look up the password in pap-secrets.
That worked great. Thank you.
Chris
When trying to connect through diald, I am seeing PAP authentication
failed in my ppp.log. I think it's because diald does not know what user
to pass to pppd. Where is the ISP username supposed to be specified when
using diald? When running pon, this comes out of /etc/ppp/peers/provider,
but
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Saturday, December 05, 1998 4:56 PM
To: Chris Stalker-Herron
Cc: Debian User List
Subject: Re: ISP username for diald
Chris Stalker-Herron writes:
When trying to connect through diald, I am seeing PAP
If you go to http://www.creativelabs.com/ you can find technical information
on all their products.
Chris
PROTECTED]
Sent: Monday, October 12, 1998 11:43 PM
To: Chris Stalker-Herron; Debian User List
Subject: Re: Install with Sony CDU-33A
Hi,
You need to make the device drivers floppy, at least. Use rawrite to make
the disks-i386/current/drv1440.bin file. This file has the device drivers
Hi,
I am trying to install 2.0.2 from CD using a Sony CDU-33A drive w/
proprietary controller. I start by running boot.bat from the \install
directory of the CD. When I get to the step to 'Install Operating System
Kernel and Modules' and select cdrom and proprietary controller it forces me
to
I'm trying to install for the first time on a 486DX33, AMIBIOS 2.3, 8M RAM,
170M HD. As I step through setup, I get to the 'Partition a Hard Disk'
step. I select next and am offered the single choice of /dev/hda. I select
it, the screen quickly shows a segmentation fault, says its determining
I'm trying to install for the first time on a 486DX33, AMIBIOS 2.3, 8M RAM,
170M HD. As I step through setup, I get to the 'Partition a Hard Disk'
step. I select next and am offered the single choice of /dev/hda. I select
it, the screen quickly shows a segmentation fault, says its determining
9 matches
Mail list logo
