Hi,
My mouse is on /dev/ttyS1. however, since a few days, gpm and X don't
react any more to mouse movements/clicks.
i don't know much about mouse configuration, but cat /dev/ttyS0 gives an
IO error, while cat /dev/ttyS1 doesn't, so i assume the system detects
'something' but it isn't
On Wed, 1 Oct 1997, Dr. Daniel Mashao wrote:
I have read all the man pages and HOWTO but I still have a problem
printing on a novel network laserjet. I have finally found a way to print
postscript documents but I cannot print plain text or dvi format. Any
ideas?
text: some printers (e.g.
Hi,
My computer:
-pentium166
-32MbRam
-S3-Virge (3DVGA digimate)
-adaptec2940scsi (sda,sdb=harddisks)
-atapi cdrom
-kernel 2.0.30 (not all packages are upgraded to debian 1.3.1, i think
some are
still 1.2 or 1.3)
after i upgraded from 16Mb ram to 32Mb ram and therefor also replaced my
which hardware is faulty? the 32Mb and/or the
S3Virge?
jan
Jan Ramon wrote:
Hi,
My computer:
-pentium166
-32MbRam
-S3-Virge (3DVGA digimate)
-adaptec2940scsi (sda,sdb=harddisks)
-atapi cdrom
-kernel 2.0.30 (not all packages are upgraded to debian 1.3.1, i think
some
i temporarily 'solved' the problem by adding the option -nocpp to xrdb in
Xsession. But of course, now i can't use any macro's :-(. So i still
welcome all help. thx.
Jan
-
as a X newbee, i experimented with Xresources and
as a X newbee, i experimented with Xresources and succeeded setting my
preferences. Everthing was ok for a few days. Today i downloaded
pcmcia, booted linux, compiled pcmcia, and started X. from then my
Xresources isnt anymore read correctly. xrdb gives the following error
in
On Fri, 11 Apr 1997, Rick wrote:
-BEGIN PGP SIGNED MESSAGE-
I found a PNP FAQ and double checked at usr.com. It seems that PNP modems
with emulated uart's (what an idea) are totally incompatable. This
Winmodem will only work with windows (not even DOS).
By the way. I did do
On Tue, 1 Oct 1996, Bill Wohler wrote:
Would anyone else like to see a Sort by section major sort in
dselect?
I think it's a good idea. It makes installation easier.
Jan
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] . Trouble? e-mail to
On Mon, 30 Sep 1996, Andrew Stephen wrote:
Hi,
I have just started playing around with Latex and was wondering if its
possible to to convert a dvi file into a Word for Windows format. Any help
/ suggestions would be appreciated.
Regards,
Andrew
dvi to word seems difficult. I know a
On Mon, 9 Sep 1996, Joey Hess wrote:
I'm a new debian developer, and though everything else is working fine,
I'm not signed up to the debian-devel mailing list. I've tried mailing
the owner, sending subscribe messages to the listserver, etc, and I've
never gotten any response back (It's
On Fri, 6 Sep 1996, Bruce Perens wrote:
[Question about how to neatly change the eepro driver CSR address]
If it's a module, try modprobe eepro io=0x230. If that works, add it
to /etc/conf.modules . Otherwise, just add 0x230 to eepro_portlist.
Adding 0x230 to eepro_portlist doesn't work.
) /* Check a single specified
location. */
return eepro_probe1(dev, base_addr);
but this doesn't seem a clean way to solve the problem. Is there info
(doc/howto/) available about clean kernel programming?
Jan Ramon
([EMAIL PROTECTED])
12 matches
Mail list logo
