On Tue, Sep 14, 1999 at 02:22:01PM -0400, Jon Hughes wrote:
Has anyone managed to get Debian connected with the @home cable modem
service? My brother is going to soon be another Debian user and he's
Hi Jon,
I'm actually connected to a cable-modem on cable TV in france.
If you want, I can
not very much ram; try instead to
download the .deb package, and type 'dpkg -i dhcpcd-x.x.x.deb', it use less ram
then deselect does.
JY
--
Jean-Yves Barbier [EMAIL PROTECTED]
Membre fondateur du CGE
La mort n'est, en definitive, que le resultat d'un manque d'education
puisqu'elle est la consequence
is made of a 486 firewall, 8 MB ram, 125 MB HD (only 55MB taken under
debian!), wich permit acces to cable internet, and a PII/400 station.
JY
--
Jean-Yves Barbier [EMAIL PROTECTED]
Membre fondateur du CGE
La mort n'est, en definitive, que le resultat d'un manque d'education
puisqu'elle est la
, he'll be very
welcomed.
Thanks in advance,
JY
--
Jean-Yves Barbier [EMAIL PROTECTED]
Membre fondateur du CGE
La mort n'est, en definitive, que le resultat d'un manque d'education
puisqu'elle est la consequence d'un manque de savoir vivre. P. DAC
Boycott Intel, watch: http
xfree86 version (3.3.6 or 4.0.0 ?).
The only PB of frame buffering is the VESA standard, which means 60Hz sync.
speed. That's very disagreable when you work a lot under X.
JY
--
Jean-Yves Barbier [EMAIL PROTECTED]
Membre fondateur du CGE
La mort n'est, en definitive, que le resultat d'un manque
is.
Thanks a lot Jens, there is effectively a FCC number (LE3NEUB).
So now I'm gonna read the FCC's web site.
JY
--
Jean-Yves Barbier [EMAIL PROTECTED]
Membre fondateur du CGE
La mort n'est, en definitive, que le resultat d'un manque d'education
puisqu'elle est la consequence d'un manque de savoir
BUT using lilo jumps between partitions (/dev/hda1 (inside 1024
limits) lilo was jumping to /dev/hdc5 (Extended partition, inside 1024 limits)
wich was jumping to /dev/hdc7 (wich was OUTSIDE 1024 limits from /dev/hdc1, but
within 1024 cyls from /dev/hdc5 !)
JY
--
Jean-Yves Barbier [EMAIL PROTECTED
?
The board number is: 02/02/96-i430FX-2A59CG0PC-00
Did you tryied directly to join AWARD?
--
Jean-Yves Barbier [EMAIL PROTECTED]
Les choses ne sont pas toujours ce que l'on voudrait qu'elles soient qu'elles
fussent... P. DAC
Boycott Intel, watch: http://www.bigbrotherinside.com
KB + 384 Kb = 1024 Kb = 1 MB !
--
Jean-Yves Barbier [EMAIL PROTECTED]
Les choses ne sont pas toujours ce que l'on voudrait qu'elles soient qu'elles
fussent... P. DAC
Boycott Intel, watch: http://www.bigbrotherinside.com
, you're right! I was oblige to downgrade to 2.2.5 to use this @#!?§ object
driver from'em
--
Jean-Yves BARBIER [EMAIL PROTECTED]
Les choses ne sont pas toujours ce que l'on voudrait qu'elles soient qu'elles
fussent... P. DAC
Boycott Intel, watch: http://www.bigbrotherinside.com
If you need N
simple Fethi: if the x from 2.x.n is ODD, then the kernel is
unstable, if its even, then its stable!
--
Jean-Yves Barbier [EMAIL PROTECTED]
Les choses ne sont pas toujours ce que l'on voudrait qu'elles soient qu'elles
fussent... P. DAC
Boycott Intel, watch: http://www.bigbrotherinside.com
--
Jean-Yves BARBIER [EMAIL PROTECTED]
Les choses ne sont pas toujours ce que l'on voudrait qu'elles soient qu'elles
fussent... P. DAC
Boycott Intel, watch: http://www.bigbrotherinside.com
If you need N components to build your board, you'll ALWAYS have N-1 in stock
Murphy's law
jean-Yves BARBIER wrote:
Hi all,
I try to compile a 2.2.5 kernel (was up to 2.2.7 :-(( ) to make my SG live!
work
Hi again, I found the PB: Souns card must not be in module, only the driver!
(But why is it possible to compile sound card in module so??)
--
Jean-Yves BARBIER [EMAIL
: 06 Lun: 00
Vendor: IBM Model: DDRS-39130D Rev: DC1B
Type: Direct-AccessANSI SCSI revision: 02
I join you an answer of the SCSI maintainer in addition to the excellents
advices John P. gave.
Hope it will help.
JY
--
Jean-Yves BARBIER [EMAIL PROTECTED
say that I'm not sure that I agree
with my own proposal since I do get a feeling of what's in store for me by
reading messages from you experienced people, but I wonder what others think.
Dave
PLS, don't post in html!
--
Jean-Yves BARBIER [EMAIL PROTECTED]
Les choses ne sont pas toujours ce
for the power of calculation; on my opinion, you should come to this OS.
Also, you can install it on a small machine, my old 486-66 / 8 MB ram / 128 MB
HD is working very well!
Any help greatly appreciated--
Art Brown
Hope it will help you.
Regards,
JY
--
Jean-Yves BARBIER [EMAIL PROTECTED]
Les choses
between the two systems.
Huuu?
I started one disk (now have one especially for Linux ;-) ), and the only
problem I had was w98 reinstall crunching lilo boot.
JY
--
Jean-Yves BARBIER [EMAIL PROTECTED]
Les choses ne sont pas toujours ce que l'on voudrait qu'elles soient qu'elles
fussent... P. DAC
Boycott
, and now my mouse
works. But maybe I should just start all over again!
^
This is a no-no, you're not under MacroSOB products, you should make a lotta big
mystakes to break your Linux system!
JY
--
Jean-Yves BARBIER [EMAIL PROTECTED]
Les choses ne
jumper to be set in slave mode?
Is your HD (alone) well auto-recognized by the bios?
JY
--
Jean-Yves BARBIER [EMAIL PROTECTED]
Les choses ne sont pas toujours ce que l'on voudrait qu'elles soient qu'elles
fussent... P. DAC
Boycott Intel, watch: http://www.bigbrotherinside.com
If you need N
Michelle Coelho wrote:
Yes, the hard disk is auto-recognized by the BIOS when it it alone.
So, now, check the manual about the CD-ROM jumpers (don't you have secondaries
IDE I/F?, check in the bios setup)
JY
--
Jean-Yves BARBIER [EMAIL PROTECTED]
Les choses ne sont pas toujours ce que
Michelle Maria Coelho wrote:
I bought the CDROm from an auction. The seller did not provide the
manual. There is just one IDE drive.
Aîîîe! Try to check your way, I'm gonna try mine! WE MUST find the manual, or at
least the jumper settings!
We'll keep in touch.
JY
--
Jean-Yves BARBIER
Hi again, Michelle,
You'll find attached the most important file (html, s'cuses) I found using
http://www.goto.com, searching: matsushita kotobucki cr-563-b manual; there's
a lot of'em!
--
Jean-Yves BARBIER [EMAIL PROTECTED]
Les choses ne sont pas toujours ce que l'on voudrait qu'elles soient
Hi all,
I just succeed to start X under frame buffer (thanks to Geert Uytterhoeven!),
bur I don't have the '@' available from my
keyboard! (quite silly, isn't it?).
Its a huge problem, because it oblige me to use windows.
How can I recover it??
Regards,
JY
--
Jean-Yves BARBIER [EMAIL
a month, so I don't know how to program bash
yet)
JY
--
Jean-Yves BARBIER [EMAIL PROTECTED]
Les choses ne sont pas toujours ce que l'on voudrait qu'elles soient qu'elles
fussent... P. DAC
Boycott Intel, watch: http://www.bigbrotherinside.com
If you need N components to build your board, you'll
/2.x.x /lib/modules/2.x.x-old (if recompiling the
same version) OR rm /lib/modules/2.x.x
cd ..
dpkg -i kernel_image-2.x.x-1.00-i386.deb
reboot
Hop! this is it!
Regards,
JY
--
Jean-Yves BARBIER [EMAIL PROTECTED]
Les choses ne sont pas toujours ce que l'on voudrait qu'elles soient qu'elles
Hi all,
If this can help somebody like mee...
Original Message
Subject: Re: My CDR is not recognized at boot
Date: Wed, 12 May 1999 17:52:13 +0200
From: Kurt Garloff [EMAIL PROTECTED]
Organization: SuSE GmbH, Nürnberg, FRG
To: Jean-Yves BARBIER [EMAIL PROTECTED]
References
are the parms I found under W98. Shall I give
these parms to the driver (but I don't have MPU adress)??
Help!
Thanks in advance
JY
--
Jean-Yves BARBIER [EMAIL PROTECTED]
Les choses ne sont pas toujours ce que l'on voudrait qu'elles soient qu'elles
fussent...
P. DAC
-Yves BARBIER [EMAIL PROTECTED]
Les choses ne sont pas toujours ce que l'on voudrait qu'elles soient qu'elles
fussent...
P. DAC
Netscape to always convert html to plain text,
2- You choose the MIME format (wich need a conversion any time)
Try to de activate one by one.
Bye
--
Jean-Yves BARBIER
[EMAIL PROTECTED]
Les choses ne sont pas toujours ce que l'on voudrait qu'elles soient qu'elles
fussent...
P. DAC
to the vga=ask of lilo) stay stuck!
I must make a ctrl-c to recover the hand on the console.
Help me, I'm a newbie and I spent the whole week trying to make it work!
Thanks in advance
--
Jean-Yves BARBIER
[EMAIL PROTECTED]
Les choses ne sont pas toujours ce que l'on voudrait qu'elles soient
Hi folks,
Since I use the 2.2.1 kernel, it refuse to recognize my second CD-ROM (writer)
and I don't know why!
specs:
SCSI card is DC-390 TEKRAM
SCSI Id 4 is a PIONEER, Model: CD-ROM DR-U16S Rev1.01, Type CD-ROM, ANSI SCSI
Rev.: 02
SCSI Id 5 is a YAMAHA, Model: CRW4416S Rev1.0e, Type CD-ROM,
HI,
I'm new with linux (3 weeks), and I wasn't able to set frame buffer with my ATI
rage fury (rage 128 GL cpu) since 3 days.
The text part is working very well (I respond 0x0317 to the vga=ask lilo line,
and I get 1024x768x16 text mode Ok)
The docs are not very helpfull, since, even together, I
201 - 232 of 232 matches
Mail list logo