,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Fri, Nov 21, 2008 at 01:56, Ron Johnson [EMAIL PROTECTED] wrote:
On 11/20/08 23:03, H.S. wrote:
Kelly Clowers wrote:
On Thu, Nov 20, 2008 at 7:58 PM, H.S. [EMAIL PROTECTED] wrote:
Ron Johnson wrote:
If your machine runs kernel 2.6, it shouldn't have OSS.
lsmod will list your loaded
there
are plenty on this list that will happily expound on their
negative experiences with PulseAudio).
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Thu, Nov 20, 2008 at 21:03, H.S. [EMAIL PROTECTED] wrote:
Kelly Clowers wrote:
On Thu, Nov 20, 2008 at 7:58 PM, H.S. [EMAIL PROTECTED] wrote:
Ron Johnson wrote:
If your machine runs kernel 2.6, it shouldn't have OSS.
lsmod will list your loaded modules. snd_pcm_oss, snd_mixer_oss
):
Linus Torvals, Richard Stallman, Joey Hess, Aaron Siego, Keith Packard
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
the alsa driver from source, which is also
pretty easy.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
?t=52941
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
, and
there's a couple of nice editions to last year's categories:
It's that time of year again? Time is just flying. I think I will have
to wait until Sunday to fill this all out, though.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
not sure when support for the rs400 series
went in, but I suspect 7.1 is too early.
Of course it is a different matter if you are using the closed source
fglrx driver.
It should work in xorg 7.1, but setting it up is a little harder than in Ubuntu.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE
file:
alias ds='du --max-depth=1 -h'
(ds = directory size)
I find it very useful, especially since I don't use a graphical
file manger much.
[1] http://www.pathname.com/fhs/pub/fhs-2.3.html
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe
On Tue, Oct 21, 2008 at 9:18 PM, Ron Johnson [EMAIL PROTECTED] wrote:
On 10/21/08 20:47, Kelly Clowers wrote:
Hi all,
Over about two days, I have had three hard freezes with Sid/Experimental.
A few minutes ago, I saw one happen (the others where while I was away).
The computer instantly
On Wed, Oct 22, 2008 at 1:35 PM, Andrei Popescu
[EMAIL PROTECTED] wrote:
On Tue,21.Oct.08, 18:47:07, Kelly Clowers wrote:
The most recent obvious candidate change is the most recent kernel update,
which I did shortly before the first freeze. This was the upgrade to
linux-image-2.6.26-1-686
.
These work for basic messaging, but I suspect you will be out of luck if
you like to use voice or video. I don't know if other things like x is typing
messages, current music, etc are supported on transports.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
. This was the upgrade to
linux-image-2.6.26-1-686 version 2.6.26-9.
I see nothing in syslog - everything is normal and then BAM! - restart.
If anyone has any ideas or advice, that would be great.
Otherwise, I guess this a warning to be alert for problems.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email
the package that depends on them (the
gnome metapakage) is gone?
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
I started using PA.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
)
Login and xdm should use PAM, so as long as you have libpam-heimdal
and have setup PAM correctly, everything should work.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
for that.
Optiarc AD-7200S DVD±RW sata DVD burner
http://www.sonynec-optiarc.eu/en/exhibits/half-height-drives/ad-7200s
Disc drives shouldn't have any compatablity issues.
Cheers,
Kelly Clowers
On Tue, Sep 23, 2008 at 4:55 PM, Ron Johnson [EMAIL PROTECTED] wrote:
On 09/23/08 18:17, Kelly Clowers wrote:
[snip]
On 2008-09-21 11:13 -0500, Ron Johnson [EMAIL PROTECTED] wrote:
I wouldn't hold my breath. x.org needs DX9-capable cards like nvidia
73xx series cards.
What? What does
On Sun, Sep 21, 2008 at 5:57 AM, brumair [EMAIL PROTECTED] wrote:
Hello.
Is there any problem on this hardware components?
- Motherboard: Sapphire mATX 780G
- CPU: Amd Athlon 64 X3 8650
- RAM: OCZ DDR2 6400 (4GB)
- Hard disk: Maxtor STM3250820/310AS 250GB SATA2
- Video: Ati HD3450 HM
Radeon doesn't do
acceleration for your card, but RadeonHD should if it is 1.2 (which is in
Testing). AFAIK, the DRI and RenderAccel options should make it work.
When you say direct rendering is disabled, did you determine that
with glxinfo or what?
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE
On Sat, Sep 13, 2008 at 9:03 AM, Kelly Clowers [EMAIL PROTECTED] wrote:
On Fri, Sep 12, 2008 at 2:34 PM, Nicholas Syrotiuk
[EMAIL PROTECTED] wrote:
Thanks for the suggestions, Kelly.
First I stuck with the fglrx driver and added the two options to the
Device section of xorg.conf
can't offer more help.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
, I can't help.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
to highest level:
alsa volume - set with alsamixer, alsamixergui or gnome-alsamixer
pulse-audio volume - set with pavucontrol/pulse-audio volume
App volume control - in media player, etc.
Have you checked all of these, and are you running Gnome,
KDE3, KDE4, or other?
Cheers,
Kelly Clowers
On Tue, Jul 29, 2008 at 5:40 PM, Ron Johnson [EMAIL PROTECTED] wrote:
On 07/29/08 18:07, Kelly Clowers wrote:
On Tue, Jul 29, 2008 at 2:42 PM, Ron Johnson [EMAIL PROTECTED]
wrote:
On 07/29/08 16:00, Kelly Clowers wrote:
On Tue, Jul 29, 2008 at 10:34 AM, Ron Johnson [EMAIL PROTECTED
not use DRM/DRI?
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Tue, Jul 29, 2008 at 2:42 PM, Ron Johnson [EMAIL PROTECTED] wrote:
On 07/29/08 16:00, Kelly Clowers wrote:
On Tue, Jul 29, 2008 at 10:34 AM, Ron Johnson [EMAIL PROTECTED]
wrote:
On 07/29/08 11:38, Jim McCloskey wrote:
Ron Johnson [EMAIL PROTECTED] wrote:
| Does this infer that you
export LANG=en_US.UTF-8
Capitalization and punctuation of the locale is important.
Generally:
language_LOCATION.ENCODING
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
from
mozilla.org.
Have you tried cleaning your profile or tried a new profile? And as some others
said, restarting can sometimes fix issues with old libraries being
used, although
theoretically it shouldn't be needed.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
these days) then
a switch to XAA will improve your browsing experience significantly.
I have found EXA to work very well with the Radeon drivers (r300/r400).
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
packages instead of
the adobe install.
Personally, I prefer Adobe's Flash 10 beta. It seems to have smoother
playback and some report lower cpu usage.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Sun, Jul 20, 2008 at 12:20 PM, Ron Johnson [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 07/20/08 14:01, Kelly Clowers wrote:
[snip]
Personally, I prefer Adobe's Flash 10 beta. It seems to have smoother
playback and some report lower cpu usage.
How stable
On Sun, Jul 20, 2008 at 2:54 PM, Nick Lidakis [EMAIL PROTECTED] wrote:
Kelly Clowers wrote:
On Sun, Jul 20, 2008 at 12:20 PM, Ron Johnson [EMAIL PROTECTED]
wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 07/20/08 14:01, Kelly Clowers wrote:
[snip]
Personally, I prefer Adobe's
On Sun, Jul 20, 2008 at 12:02 PM, Shachar Or [EMAIL PROTECTED] wrote:
This is because Hebrew is RTL and it is confusing when combined with LTR;
not to mention that the console doesn't even print RTL correctly, but in
reverse! (where do I file a bug for this?)
I think RTL support on the console
a postgres module, but I am not sure yet if I
want it in sql yet, I am think 1 server with text files, which rsyslog
seems to be able to do.
I don't have experience with it, but I believe Fedora 8 and 9 use rsyslog
by default.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
as I can tell Google
only communicates with AIM which I don't need. And even if Google has
proven more FLOSS friendly than Yahoo, competition is good!
Google Talk can to connect to transports (for yahoo, msn, ect) on
other severs.
http://blogoscoped.com/archive/2006-05-02-n79.html
Cheers,
Kelly
vimperator was a bad fit. I find I use a text
browser more and more.
what about conkeror? It was an extension to give Firefox Emacs-style
keybindings, but is now a separate XULRunner browser.
http://conkeror.org/
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Technologies Inc Radeon R300 NE [Radeon 9500 Pro]
Driver vesa
BusID PCI:1:0:0
EndSection
Note that vesa cannot do much more than 1024x768
Anyway, judging from Kelly Clowers' reply, I might wait a few months and
revert to this if this phenomenon has not ceased
strong enough yet.
472108 in particular looks related.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Sun, Jun 1, 2008 at 12:51 PM, Kelly Clowers [EMAIL PROTECTED] wrote:
On Sun, Jun 1, 2008 at 12:09 PM, Florian Kulzer
[EMAIL PROTECTED] wrote:
Also check the BTS. A quick glance shows at least 4 bugs related to VT
switching (#435040, #472108, #470925, #482696). Maybe your problem is
related
have to know how to talk to Akonadi.
The Akonadi page isn't the greatest, and is out of date, but the
diagram at least shows the idea.
http://pim.kde.org/akonadi/
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
few days. I never really bothered to investigate it
(too busy). Maybe whatever fixed it in Sid will trickle down soon.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
? Is it a patch for GRUB or GRUB2? I don't see it in the
lenny repos. Any idea?
I just thought I'd say that I have been using Grub2 for several months, and I
haven't had any problems. I think Gilles' email answers your questions. Good
luck.
Cheers
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL
On 4/18/08, Thierry Chatelet [EMAIL PROTECTED] wrote:
Is it possible to install the above, eitherone, on a sid machine. I need it
fot my HP H470 printer.
For sid, besides using the hp installer, you could also use the ubuntu
hardy version...
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email
about which
VO method it is trying to use. It will look something like this:
VO: [xv] 320x240 = 320x240 Planar YV12
(the bit in [] being the important part)
Also check to see if there are any other errors.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
cpan modules. It is
clearly easy to use, since I got it to work without much trouble and I
know almost nothing about perl or cpan.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On 3/12/08, Rehceb Rotkiv [EMAIL PROTECTED] wrote:
Hello,
what is the proper way to automatically start a program after Fluxbox
launch? Most sources say something about ~/.xinit or ~/.xsession, but I do
not have/need these files because I launch Fluxbox from GDM (via a .desktop
file).
matters is the cpu. i686 is ok
for all amd and
intel chips newer than pentium II or Athlon. If you have a 64 bit chip
(athlon 64 or
core 2 (or some P4's)) you can use the amd64 arch, although 686 will also work.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
up to 1.1, which is a fair bit better than 1.0
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Tue, Feb 26, 2008 at 5:00 PM, Bret Busby [EMAIL PROTECTED] wrote:
On Tue, 26 Feb 2008, Kelly Clowers wrote:
Date: Tue, 26 Feb 2008 10:42:33 -0800
From: Kelly Clowers [EMAIL PROTECTED]
To: debian-user debian-user@lists.debian.org
Subject: Re: Iceape
Resent-Date: Tue, 26 Feb 2008
- not very
many things actually depend on them. I do have libfam
installed - lots of things depend on that or libgamin, but
even libfam and libgamin don't depend on their daemons
(they merely suggest them). Unless you really need fam,
you should look into removing it.
Cheers,
Kelly Clowers
emulation.
In ~/.xine/config :
audio.driver:pulse
In ~/.mplayer/config :
ao = pulse
SDL and GStreamer have pulseaudio packages that you can install.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
On Sun, Feb 24, 2008 at 5:04 AM, Frank McCormick
[EMAIL PROTECTED] wrote:
On Sat, 23 Feb 2008 21:49:37 -0800
Kelly Clowers [EMAIL PROTECTED] wrote:
On Sat, Feb 23, 2008 at 5:29 PM, Frank McCormick
[EMAIL PROTECTED] wrote:
I just went back to the straight Intel video
is supposed to have basic support for NTLM.
The 9.5 betas may have improved support and there are proxies that you can
run on your local machine that will do NTLM auth.
PortableApps.com may help for some things.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
are you using?
Are you using the perfect setup docs?
( http://www.pulseaudio.org/wiki/PerfectSetup )
You say Audacious stutters, have you tried other apps? Do they have
the same problem?
If there is anything in the logs, it would probably be in the syslog or
user log.
Cheers,
Kelly Clowers
(~$45)
which has full 2d and 3d with the open radeon driver. It plays
Quake III, so I'm happy. I'll probably upgrade to a recent Radeon
once the RadeonHD driver is ready.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
;
Icedove or Evolution for GNOME.
I fail to see why not using a standard GUI mail client is n00bish.
Advocating ever more basic systems for reading mail may be silly,
(or may not be) but a n00b is unlikely to even know about mutt and
mail.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email
On Thu, Feb 14, 2008 at 4:06 AM, Hugo Vanwoerkom [EMAIL PROTECTED] wrote:
Hi,
I haven't googled this, but in looking around for a flatpanel LCD
monitor, what are the positive things to look for and the negative
things to avoid? Since the world is moving to flatpanels...
I found this LCD
). This may be annoying to you, especially if you
use it for hours at a time. It doesn't bother me for the short times I use
my grandmothers computer, but if/when I get an LCD for myself, I will
avoid TN panels, which frequently have this issue. Currently, most 22
LCDs are TNs.
Cheers,
Kelly Clowers
. Something like this KDE which can be
installed via apt-get?
Gwenview (KDE4 default image viewer (also available in KDE3) and Kview
(KDE3 default image viewer) should both be able to do that.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble
supports
annotations and there is a native Linux version.
[1] http://live.gnome.org/Evince/Roadmap
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
it yet, but it obviously has at least some support, as
poppler is
Okular's pdf lib. I guess the Gnome guys just haven't added the UI for it.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
and SeaMonkey use
a variant of one of those (although TB3 will finally support maildir).
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
compatible with ascii.
Any slight disadvantages unicode might have are more than
outweighed by the communication barriers it breaks down.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
are being
abandoned for sqlite).
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Feb 4, 2008 9:38 AM, Paul Cartwright [EMAIL PROTECTED] wrote:
On Mon February 4 2008, Ron Johnson wrote:
AbiWord is much lighter smaller than OOo.
I saw AbiWord when I installed ... another distro ( Pu..y ...)
but I never used it. is abiword just a word processor, as opposed to a full
.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
a protocol option, such as:
Option Protocol ImPS/2
You may not need this or the protocol auto may work.
See man mouse for more protocols.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
some related information:
http://wiki.debian.org/XStrikeForce/XSFTODO
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Jan 28, 2008 8:06 AM, Kelly Clowers [EMAIL PROTECTED] wrote:
On Jan 28, 2008 6:29 AM, charlie derr [EMAIL PROTECTED] wrote:
I have a laptop with a native resolution of 1900x1200 which has been
working fine for the past year an a half.
This weekend I upgraded (which included both X
On Jan 28, 2008 10:20 AM, Andrew Sackville-West
[EMAIL PROTECTED] wrote:
On Sat, Jan 26, 2008 at 09:32:38PM -0800, Kelly Clowers wrote:
On Jan 26, 2008 8:03 PM, Bill Wohler [EMAIL PROTECTED] wrote:
RH 8 has switched to pulseaudio, SUSE is considering it. I was wondering
what
,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
, but I think it is very new, and it seems to be available
only in testing.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
library
called et-sdl-sound, even Quake III works fine. All this is on Sid btw.
Anyway, it is so hassle-free and good that it seems like I have been
using it for much longer than 3-4 weeks. I wouldn't go back to bare
alsa, and certainly not arts or esd.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email
On Jan 26, 2008 4:09 PM, tom arnall [EMAIL PROTECTED] wrote:
snip
i solved the problem by installing wine from source (the latest version), then
reinstalling Chessbase.
question: is the difference likely to be that i put the newest wine version on
my system, or simply that i installed from
for a Linux to use.
Debian backports (backports.org) has 2.6.22 kernels for etch:
http://packages.debian.org/etch-backports/linux-image
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
without hal, and thus udev.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Jan 22, 2008 6:36 AM, Stef Daniels VK5HSX [EMAIL PROTECTED] wrote:
Hi Peoples,
I used the following link
http://blog.creonfx.com/linux/install-kde-4-on-debian-unstable-sid to
install KDE4 on my HP Presario Laptop and thought I would try it out.
Everything went smoothly
, that will work fine. But if you used netinst, you
must have a network connection, so why do you need
to get packages from the cd?
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
as I wish? Does anybody have the same problem?
Does it reappear for every website you visit or for every search you do? If the
latter, open preferences - Browser - Internet Search and uncheck the
option to open the search pane of the sidebar when a search is performed.
Cheers,
Kelly Clowers
HISTSIZE=1
# append history instead of overwriting
shopt -s histappend
# every time a prompt is displayed, append the previous line to history
PROMPT_COMMAND='history -a'
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble
HOME on a separate
partition, so beta's can mess up a working setup.
I don't understand. I use the Mozilla nightlies as my main browser,
and my /home is on a separate partition. I have no trouble using
Iceape or Iceweasel when I want to.
Cheers,
Kelly Clowers
?
Below are the 2 sections, one with 2 working wheels and one with only
one working wheel and the applicable log portion.
Have 2 wheels, will travel ;-)
I am not positive, but I think I read that using 2 wheels is currently
impossible
without evdev.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE
On Jan 12, 2008 2:39 PM, Kum Gabor [EMAIL PROTECTED] wrote:
On Saturday 12 January 2008 16:11, Douglas A. Tutty wrote:
On Sat, Jan 12, 2008 at 10:50:01AM +0100, Kum Gabor wrote:
On Saturday 12 January 2008 00:59, Douglas A. Tutty wrote:
On Fri, Jan 11, 2008 at 10:21:56AM +0100, Kum Gabor
On Jan 10, 2008 11:20 AM, Paul Scott [EMAIL PROTECTED] wrote:
I recently posted about not being able to get full resolution of my
Portege 4010 with dpkg-reconfigure. I found an example of xorg.conf
sections which solved my resolution problem but:!!!
I still don't know why 'dpkg-reconfigure
on what is causing this? I'm using the amd64 architecture (core
duo
machine) with xfce.
Thanks
Does this happen in, say, xterm? What about on the console (no X)?
What is the environmental variable TERM set to?
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
-tool
W: Unable to locate package utf8-migration-tool
E: No packages found
I'm running an up to date Etch system.
Maybe it's only in testing/sid? You should be able to install it
from there, as it doesn't have too many dependencies.
I think it originated as an Ubuntu tool.
Cheers,
Kelly Clowers
the best solution to a
problem is to change the problem.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
on debugging:
http://www.x.org/wiki/Development/Documentation/ServerDebugging
That's all I know. I was thinking about try it, and this doc makes it
look not to hard, but I never got around to it, and the problem I had
went away after some updates.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email
letters]:
http://www.debian.org/doc/manuals/debian-reference/ch-tune.en.html#s-l10n
and in the Debian i18n (internationalization) [take out 18 letters] Guide:
http://www.debian.org/doc/manuals/intro-i18n/index.en.html
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
like
20%-25% of European users.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
changed 5 words and the file names of the
tabs-left extension and created a working tabs-right extension.
Here is the code for the tabs-left extension:
http://rmjokers.blogspot.com/2006/11/dont-let-tabs-control-you.html
I think you can see just by looking at it how to make tabs-right.
Cheers,
Kelly
suboptimal names to
me, but they aren't as widespread. Anyway, I just say Mozilla and
Firefox unless I really need to specify (I hope no one from MoCo
reads that).
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
(testing) and
Sid I use gutsy.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Dec 10, 2007 2:16 PM, Alou Dialy [EMAIL PROTECTED] wrote:
Why cant I use oss I dont want to install alsa.
You can use OSS, but it is has been deprecated for a long time and
more and more OSS drivers are being removed from the kernel. It
probably won't be too long until all of OSS is removed.
try a minimal Window Manager, like IceWM or
Fluxbox. It really depends on what you want out of it.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
user, the prompt is cyan and uses # instead of $ and
I still have to use sudo and enter the password for the big stuff.
Michael, you said you use sudo for Wesnoth, but it seems to run fine
as a normal user for me. I am using 1.2.x on sid.
Cheers,
Kelly Clowers
--
To UNSUBSCRIBE, email to [EMAIL
601 - 700 of 874 matches
Mail list logo