need. Afterwards you can remove the 36 you
don't need. In Etch the Intel i965 video controller is not supported
yet, but may be supported in Lenny. If it is supported it is probably
in package xserver-xorg-video-i810. Check the package descriptions to
find out.
Ken Heard
Jordi Gutiérrez Hermoso wrote:
On 07/06/2008, Ken Heard [EMAIL PROTECTED] wrote:
In Etch the Intel i965 video controller is not supported
yet, but may be supported in Lenny. If it is supported it is probably
in package xserver-xorg-video-i810.
Uhm.
Is this a different i965 card I
in unaccelerated mode.
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
message after
booting?)
Or is my only option to attempt a ninth installation and hope for the best?
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Douglas A. Tutty wrote:
On Sun, May 04, 2008 at 04:59:07PM -0400, Ken Heard wrote:
LVM VG SOL, LV var - 3.2 gB Linux Device Mapper
#1 3.2 gB
SCSI1 (0,0,0) (sda) - 250.1 gB ATA WDC WD2500AAJS.0
#1 primary 82.2 mB B F ext3 /boot
#2 primary 250.0 gB K lvm
Undo changes
to indicate which volumes were
to be encrypted.
My question: can I do what I want to do and -- if so -- how?
Ken Heard
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
to indicate which volumes were
to be encrypted.
My question: can I do what I want to do and -- if so -- how?
Ken Heard
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
to indicate which volumes were
to be encrypted.
My question: can I do what I want to do and -- if so -- how?
Ken Heard
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
Is it possible -- by means of an extension perhaps -- to make large,
dense images, e.g. jpegs, to fit the window when opened in KDE
Konqueror? This kind of reduction is possible in Iceweasel, but I would
like the same thing in Konqueror.
Ken Heard
words, but was unsuccessful.
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
if I can import all my
IceDove files to either Mutt or Kmail. I may even abandon IceWeasel for
Konqueror.
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
, in my experience); or is it just
me? If the former, should I report them to KDE? If the latter, I would
appreciate advice as to what I should do about them.
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
a Debian backport if such will exist after Etch
becomes stable; or wait until the next Debian stable release, when KDE
will probably be up to 4.?.?, or even 5.?.?.
Anyway, thanks to Florian for his insight.
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
the connection
to transfer files created while travelling back to the desktop.
Does anyone have any idea why I should get this input/output error
message now but not before?
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe
in with
the above URL.
https://www.sunnet.sunlife.com/member/BlockPage128.asp
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
. The server hosting the site may not be in Canada, however.
When I am back in Canada I will have to investigate further with the
insurance company.
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
.
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
the price. So we will have to put up with
dealing with the symptoms instead of the problem for some time yet.
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
sites which would otherwise prohibit access unless they can detect that
identification. I have done so with several sites.
I would certainly like to see such and identification capability in
Iceweasel. What are the possibilities?
Ken Heard
--
To UNSUBSCRIBE, email
Greg Folkert wrote:
On Tue, 2007-03-20 at 09:52 +0700, Ken Heard wrote:
[snip]
I would certainly like to see such and identification capability in
Iceweasel. What are the possibilities?
http://chrispederick.com/work/useragentswitcher/
That is the one you are looking for.
Thanks
these packages for dosemu, I should remove them -- once I figure out how
to do so *without* removing key packages. I also really wonder whether
I need to keep the arts set of packages.
Regards,
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL
properties of
dosemu perhaps I should have left well enough alone.
Regards,
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
-headers-2.6.18-4-686/include/config/isa
./usr/src/linux-headers-2.6.18-4-686/include/config/generic/isa
./lib/modules/2.6.18-3-686/kernel/sound/isa
./lib/modules/2.6.18-4-686/kernel/sound/isa
LAP:/# find -iname isa-pnp
LAP:/#
I am using kernel 2.6.18-4-686.
Ken Heard
Also found the following:
LAP:/# find -iname isapnp
./sys/module/snd_opl3sa2/parameters/isapnp
./usr/src/linux-headers-2.6.18-4/drivers/pnp/isapnp
LAP:/#
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
not even know what packages are necessary for sound. I
would appreciate if one or more of the experts out there could give me
some clues as to what I should be looking for.
Regards,
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
Johannes Wiedersich wrote:
you should also add the user to the group audio (and video ?).
as root:
# adduser your-user-name audio
# adduser your-user-name video
Both the users had already been added to those two groups, but not by me.
Regards,
Ken Heard
Windows 2000 on it I was able to do both -- listen to audio
CDs and watch and listen to downloaded newscasts. So it would seem that
the problem(s) is(are) not hardware related.
Any further suggestions?
Regards,
Ken Heard
icedove and a terminal emulator.
Regards,
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
?
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
in both do
not indicate anything amiss; nor have I noticed any performance degradation.
Is the appearance of this failed! message on boot up something I
should be concerned about? If not, is there some way I can stop it?
Regards,
Ken Heard
, and so is Christmas.)
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 03/04/07 05:07, Ken Heard wrote:
Ron Johnson wrote:
Testing your assertion now.
Ok, I created the 03/03/07 07:39 email, and then did:
File-Send Later
Icedove put the email in Local Folders.Unsent, because there *is
no* Unsent folder
may be? Another
question: is there a Debian package which sniffs for 802.11g wireless
access points and permits entry of encryption keys for those points,
thereby permitting access?
Regards,
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL
as auto-sending email when you return from off-line, *that*
sounds like valid enhancement request (that should go thru Mozilla,
not Debian).
I think auto-sending is already possible, but I haven't checked.
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
appreciate all the help I can get to be able to do so. I would also
like to be able to switch from one card to the other without difficulty,
by obviating the problem mentioned in the proceeding paragraph.
Regards,
Ken Heard
Roberto C. Sanchez wrote:
Is your account a POP account or IMAP?
POP
Regards,
Ken
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Folders Unsent folder.
I could find no option among Icedove's preferences to have Send later
messages saved in the account's Unsent Messages folder. This bug should
be fixed.
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe
,
Ken Heard
Toronto, Canada
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Ron Johnson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 02/18/07 21:43, Ken Heard wrote:
Is there anyone on this list who uses dosemu? I had it working on Sarge
ever since Sarge came out, but I am having trouble getting it to work on
Etch.
This is an example of a Bad Question
I found the answer to my own problem. I only had gcc installed; whereas
it seems that g++ was also needed for the configuration. It seems that
g++ and gcc are dependent on each other.
Regards,
Ken Heard
now, as Dosemu is now an orphan project. For example,
Dosbox is still an Etch package; whereas Dosemu has apparently been
dropped. I will report back in due course.
Regards,
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
Hugh Lawson wrote:
On 2007-02-19, Ken Heard [EMAIL PROTECTED] wrote:
My original question was to find out whether there is anybody on the
list who still uses dosemu.
Hello Ken,
I don't use dosemu very much, but I have played with it, to the extent
of getting WordPerfect 5.1, running
on the Etch laptop, or whether I can use dosbox instead. I will keep
the list posted on progress, but not before next week.
Regards,
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
John Hasler wrote:
Ken Heard writes:
Nothing, because these [dosemu] packages are not in the Debian
Etch/testing package repository
Look in contrib.
I suppose to do that I would have to add contrib to my
/etc/apt/sources.list. All it has now are etch main. Those packages
Is there anyone on this list who uses dosemu? I had it working on Sarge
ever since Sarge came out, but I am having trouble getting it to work on
Etch.
Regards,
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
Is there in the Etch packages data base a complete web authoring
system more or less equivalent to Nvu, which is in the Sarge data base?
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
.
Regards,
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
PCMCIA cards in laptops: do they need to be mounted/unmounted when
installed/removed like floppies, CF cards, etc.?
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
effect unless you
restart your user session, or even possibly not until after rebooting
the computer.
Finally, when all is done you can remove gdm, the
gnome-desktop-environment and other gnome packages as well.
Ken Heard
Toronto
On Fri, 16 Feb 2007 10:12:32 -0500
Andrei Popescu wrote:
On Tue, 13 Feb 2007 21:54:24 -0500
Ken Heard [EMAIL PROTECTED] wrote:
Ifconfig only reports the loop back IP address. The IP address
assigned by the gateway, 192.168.0.114, was not reported by
ifconfig, presumably because
Kent West wrote:
Ken Heard wrote:
Kent West wrote:
What happens when you run /etc/init.d/networking restart?
Returned:
Setting up IP spoofing protection: rp_filter.
Reconfiguring network interfaces...Failed to bring up eth0.
done.
Then a series of messages scrolled
On Sun 11 Feb 2007 15:56:23 -0500 Ken Heard wrote:
A few weeks ago I installed Etch RC1 on a Toshiba Tecra 8000 P2 laptop.
The installation itself went without hitch, and I set about customizing
it to my taste and installing various applications. For example I
replaced Gnome with KDE, as I
,
Ken Heard
Toronto, Canada
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
and surprise the KDE login manager
appeared! I wonder what I had done in the meantime to deserve this prise.
Regards,
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
can think of to do is to start the
installation all over again, this time using Etch RC2. As for the P4
box with Sarge, I can think of nothing better to do and wait until Etch
becomes stable.
Regards,
Ken Heard
--
To UNSUBSCRIBE, email
,
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
instead of 14.
Regards,
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Kent West wrote:
Run ifconfig and see if you have an expected IP address; my first
suspicion is that zeroconf got installed; it tends to cause problems
with networking.
Ken Heard replied:
Ifconfig only reports the loop back IP address. The IP address
assigned by the gateway
Kent West wrote:
Run ifconfig and see if you have an expected IP address; my first
suspicion is that zeroconf got installed; it tends to cause problems
with networking.
Ken Heard replied:
Ifconfig only reports the loop back IP address. The IP address
assigned by the gateway
Kent West wrote:
Run ifconfig and see if you have an expected IP address; my first
suspicion is that zeroconf got installed; it tends to cause problems
with networking.
Ken Heard replied:
Ifconfig only reports the loop back IP address. The IP address
assigned by the gateway
Kent West wrote:
Ken Heard wrote:
I have KDE installed on all three of the boxes my spouse and I use. The
box with Sarge installed, a P4 desktop, uses KDE 3.3.?; whereas the
other two, one a P3 desktop and the other a P2 Tecra 8000 Toshiba
laptop, have Etch, which uses KDE 3.5.5. The latter
.
Regards,
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
and the desktop I would like to remove the Trash
icon but cannot find a way to do so. I don't like any icons on the
desktop; they spoil my slide show.
Help will be appreciated.
Regards,
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL
in Linux from a novice.
Regards,
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
to you copies of my panic posts to the list. The
first one I expect to post today, called Etch X-server failure.
Regards,
Ken Heard
Toronto, Canada
Michael Pobega wrote:
Ken Heard wrote:
If GNU-Linux
that that setting
somehow got broken and it only took what I did a few minutes ago to fix
it. If I had to start over again, re-customization would have been
quite a task! Thanks, Florian for the help.
Ken Heard
Toronto, Canada
installed, and on first boot X.org was loaded without needing any manual
configuration on my part.
Ken Heard
Toronto, Canada
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
not contaminate their computers with *any* Microsoft product.
Ken Heard
Toronto, Canada
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
what I did.
I am at a loss to know what to do to get these icons back. Anyone have
any ideas or suggestions?
Ken Heard
Toronto, Canada
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
?
Ken Heard
Toronto, Canada
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
while
computer is powered off.
Does the foregoing mean that Etch does not need ntp or ntpdate to
maintain reasonable clock stability?
Ken Heard
Toronto, Canada
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble
information about those
upon request.
Since I do not have it installed I don't know what I am missing. Does
it do anything that other commands and packages do not do? If so, does
HAL do it better? In short, is HAL worth installing?
Ken Heard
.
Ken Heard
Toronto, Canada
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
0666
EndSection
---
Ken Heard
Toronto, Canada
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
advise me what to do to put these two boxes on friendly terms with each
other?
Ken Heard
Toronto, Canada
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
knows how to do what I want to do, I would
appreciate it if s/he would share the knowledge.
Ken Heard
Toronto, Canada
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
this problem when I used lprng
instead of cups.
Regards,
Ken Heard
Toronto, Canada
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
the Debian Dosemu package to work.
Instead use the latest developer version of Dosemu downloaded from the
Dosemu website.
Regards,
Ken Heard
Toronto, Canada
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
.
Regards,
Ken Heard
Toronto, Canada
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
.
Ken Heard
Toronto, Canada
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
estimation the best word
processor ever. However, when I need to I convert 5.1 files to 8.0 for
Linux, where I can format them as ps or pdf files. In extremis I can
even convert WP files to MS Word files using OpenOffice.
Ken Heard
through a print server to an HP
LaserJet II-P.
Ken Heard
Toronto, Canada
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
is not listed. Each
time I start those applications the same thing happens.
I am using Sarge with both Firefox 1.5 and Thunderbird 1.5 installed
from the Debian backports site. Can anyone explain what my problem is?
--
Ken Heard
with Windows XP. When I
bought it I did not think that this incompatibility was important,
because I never intended to use XP.
Does anybody know whether I can somehow tweak hotplug to load and, if
so, how? Or does the incompatibility go beyond XP?
--
Ken Heard
. In the meantime my spouse is
forcing me to take a 50 day holiday in Southeast Asia, starting Monday next.
--
Ken Heard
Research Associate
Museum Studies Program
University
Miquel van Smoorenburg wrote:
In article [EMAIL PROTECTED],
Ken Heard [EMAIL PROTECTED] wrote:
Daniel B. wrote:
That looks like you mistyped defaults as drfaults in your
/etc/fstab file.
I was well aware that I mistyped defaults as my original post
indicated. I was also aware
for your help in getting me out of my difficulty. I
can now get back to other things, such as getting WordPerfect 8.0 to work.
Regards,
--
Ken Heard
Research Associate
Museum Studies
is rwx.
Is this information helpful in figuring why the script does not work?
I understand what the script is supposed to do, but I have no knowldege
of perl.
--
Ken Heard
Mike McCarty wrote:
I think the easiest would be
to use a LiveCD, like KNOPPIX,
and edit the fstab that way.
That is impossible for the reasons stated in my post of 2006-01-16
19:42 EST.
--
Ken Heard
Research Associate
first
query was how to change the mount to read-write without having to
reinstall the whole operating system.
Regards,
--
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
bootcd and provided instructions as to how
to make one.
Anyone have any ideas or suggestions?
Regards,
--
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
,
--
Ken Heard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
?
Regards,
--
Ken Heard
Research Associate
Museum Studies Program
University of Toronto, Canada
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
Thanks, Steef, for the tip. I was always suspicious of the -scanbus
option in 2.6.X kernels. I will try it next time I burn a CDROM.
--
Ken Heard
Research Associate
Museum Studies Program
, say within 72 or 96 hours, will be. This person should
either answer each question himself or -- more useful -- assign
questions for answer to those people in the organization most suitable
for each question.
--
Ken Heard
Research
now.
Regards,
--
Ken Heard
Toronto, Canada
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
; consequently I do not have to find out how to do so. Thanks
anyway.
Regards to all who answered.
--
Ken Heard
Research Associate
Museum Studies Program
Adam Porter wrote:
Also, in Konqueror, just right-click the ISO, Actions-Burn...
Adam, thanks for your suggestion; I did not know Konqueror had that
capability. But then I am a BDU (brain dead user).
--
Ken Heard
Toronto
operations I performed just before this breakdown was to install the
equivs package and remove xprint.
I have concluded that there is a software problem in the P3 computer,
but do not know what to look for. I would appreciate any and all
suggestions.
--
Ken
version of
WINE is out, I may be able to install WP 12 using it.
Regards,
--
Ken Heard
Toronto, Canada
Museologist, specializing in
technology
301 - 400 of 418 matches
Mail list logo
