Re: how to use mplayer to convert real media audio file to mp3

It didn't work ffmpeg says "Unsupported codec (id=0) for input stream" I use ffmpeg from debian-multimedia for etch On Wed, May 6, 2009 at 10:28 PM, Kelly Clowers wrote: > On Wed, May 6, 2009 at 18:34, Long Wind wrote: >> I use etch >> Do you know the mplayer comma

how to use mplayer to convert real media audio file to mp3

I use etch Do you know the mplayer command to convert real media audio-only file to a mp3 file? I try audacity: 1) connect lineout of sound card to linein 2) play real media audio with real player 3) use audacity to record the sound The result isn't good, there's noise and loss Thanks! -- To

need help on mp3 recording

I have sarge or etch Which package should I install for mp3 recording? I install audacity, but it need libmp3lame.so According to tldp.org/HOWTO/MP3-HOWTO-9.html bladdenc can do the job, but which package should I install? Thanks! -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.or

Re: which package in etch can convert high-quality mp3 to low quality mp3?

but lame isn't available in etch main I give up. Thanks anyway! On Mon, Apr 13, 2009 at 5:09 AM, Bob Cox wrote: > On Mon, Apr 13, 2009 at 08:18:51 +1000, Adrian Levi (adrian.l...@gmail.com) > wrote: > >> 2009/4/13 Long Wind : >> > Thank Bob, but your command does

Re: which package in etch can convert high-quality mp3 to low quality mp3?

codec for output stream #0.0 - maybe incorrect parameters such as bit_rate, rate, width or height On Sun, Apr 12, 2009 at 1:35 PM, Bob Cox wrote: > On Sun, Apr 12, 2009 at 09:05:49 -0400, Long Wind (longwind2...@gmail.com) > wrote: > >> I have a cell phone >> it can&#x

which package in etch can convert high-quality mp3 to low quality mp3?

I have a cell phone it can't play some mp3 maybe it supports only 128K So I want to convert hight quality mp3 to 128K Which package in etch? mplayer maybe, but can you tell me all the command options? Thanks! -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "un

how to find out all the domain names that etch looks up

Thanks! -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

(solved)Re: need info on mobile phone support

09 at 5:01 PM, JosipBros wrote: > Dne nedelja 05 april 2009 ob 12:57:50 je Long Wind napisal(a): >> I just bought a Nokia 3110c: >> >> http://europe.nokia.com/find-products/devices/nokia-3110-classic/technical- >>specifications >> >> Nokia's PC Sui

Re: need info on mobile phone support

-04-2009 om 20:43 uur [tijdzone +0800], schreef Long Wind: >> I have Win2k and etch >> I hope I can get etch to work with help from the list. >> After installing microSD card, is my phone a USB storage device? >> Can etch access the card? >> >> On Sun, Apr

Re: need info on mobile phone support

I have Win2k and etch I hope I can get etch to work with help from the list. After installing microSD card, is my phone a USB storage device? Can etch access the card? On Sun, Apr 5, 2009 at 7:12 PM, Umarzuki Mochlis wrote: > > > 2009/4/5 Long Wind >> >> I just

need info on mobile phone support

I just bought a Nokia 3110c: http://europe.nokia.com/find-products/devices/nokia-3110-classic/technical-specifications Nokia's PC Suite support only XP/Vista, not Win2k I use. Is it possible that I save the pictures I capture to a micro SD card? Then I use etch thru a USB cable to get the pictur

how to run jdk 1.2 in etch

jdk 1.2 works in sarge, When I run it in etch, I get the following message: Can't load library "/mnt/sarge/home/zhou/sw/jdk1.2.2/jre/lib/i386/libjava.so", because /mnt/sarge/home/zhou/sw/jdk1.2.2/jre/lib/i386/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link

Re: Can you recommend a game in etch?

I have installed freedroid I haven't figure out how to play it. On Wed, Apr 1, 2009 at 2:56 AM, Juha Tuuna wrote: > Freedroid is fun. Of course you can install Dosbox and play old DOS games. > > -- > Juha Tuuna > > > -- > To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org > with a subj

Re: Can you recommend a game in etch?

I use twm :) On Wed, Apr 1, 2009 at 12:20 AM, Ron Johnson wrote: > On 2009-03-31 20:38, Long Wind wrote: >> >> I like simple action games >> Below are the kind of games I like: >> lbreakout2 >> tetris >> wolf3d for DOS from 3drealms >> raptor fo

problem with apt

When apt-get installs a package it will install packages that the package depends When I remove the package, the depended packages are not removed. Is there a command (or a way) to remove the depended packages? -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of

Can you recommend a game in etch?

I like simple action games Below are the kind of games I like: lbreakout2 tetris wolf3d for DOS from 3drealms raptor for DOS from 3drealms -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Re: the command to generate locale and set locale

Thanks, but I have found the command on my own. On Wed, Apr 1, 2009 at 2:41 AM, Andrei Popescu wrote: > On Mon,30.Mar.09, 17:21:19, Long Wind wrote: >> I forget the command >> Is there anyone knows the command? >> I am setting up fcitx >> Without generating and setti

the command to generate locale and set locale

I forget the command Is there anyone knows the command? I am setting up fcitx Without generating and setting default locale to gb2312, fcitx does not work properly. Thanks! -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas

Re: any image viewer for etch that you can recommend?

gqview is OK Thank you! On Sun, Mar 29, 2009 at 8:07 PM, H.S. wrote: > Long Wind wrote: >> I want a image viewer >> It should be small (use less disk space) >> It does not depend on KDE or GNOME because I use neither >> It can show image in full size by default (thumb

Re: any image viewer for etch that you can recommend?

gpicview is not available in main of etch On Sun, Mar 29, 2009 at 7:38 PM, Matthew Moore wrote: > On Sunday 29 March 2009 05:31:23 pm Long Wind wrote: >> I want a image viewer >> It should be small (use less disk space) >> It does not depend on KDE or GNOME because I use n

any image viewer for etch that you can recommend?

I want a image viewer It should be small (use less disk space) It does not depend on KDE or GNOME because I use neither It can show image in full size by default (thumbnail isn't important) It can let me delete image file that I don't like Thanks! -- To UNSUBSCRIBE, email to debian-user-requ...@

Re: problem with IP Masquerade in etch

It seems I have found out the cause: My script is simple: It does Masquerading It allows the client to visit ONLY one Web site. So for FORWARD chain, all traffic is blocked except from/to the Web site and 2 DNS servers. These are OK with sarge (kernel 2.4) and etch (kernel 2.6) for INPUT and OUTPU

Re: problem with IP Masquerade in etch

"nf_conntrack*" does not exist in "modprobe -l " listing On Sat, Mar 28, 2009 at 9:54 AM, thveillon.debian wrote: > I don't run Etch, but my guess would be to check the modules names with > modprobe -l , see if the ip_conntrack* haven't been renamed in > "nf_conntrack*" for instance... > > Tom >

Re: problem with IP Masquerade in etch

I don't use KDE I hate those big software that are not very useful My requirement is simple: masquerading that allow clients to visit only some sites. My script works in sarge! Is there anyone that can make a few correction to make my script work in etch? On Sat, Mar 28, 2009 at 7:38 AM, thveillon

Re: problem with IP Masquerade in etch

I install shorewall on etch but I have not found it useful My configuration is Masquerade that allow client machine to visit only some sites. Can you recommend other frontends? On Sat, Mar 28, 2009 at 4:05 AM, Andrei Popescu wrote: > On Sat,28.Mar.09, 03:20:25, Long Wind wrote: >>

problem with IP Masquerade in etch

I have a script It is copy and modify from IP Masquerade howto It allows clients to visit only one site It works in sarge (kernel 2.4), but not in etch (kernel 2.6) Attached is the script im2 Description: Binary data

Re: problem with module loading in etch

Thanks! I'll try your solutions later on. On Fri, Mar 27, 2009 at 4:53 PM, Alex Samad wrote: > On Fri, Mar 27, 2009 at 04:25:40PM -0400, Long Wind wrote: >> I have a bttv card >> etch loads driver for it during booting >> but etch does not use correct options >>

problem with module loading in etch

I have a bttv card etch loads driver for it during booting but etch does not use correct options so I have to use commands below: rmmod bttv modprobe bttv card=8 I add "bttv card=8" to /etc/modules but it does not help. My question is how to help etch use correct options so that I needn't enter

problem with module loading in etch

I have a bttv card etch loads driver for it during booting but etch does not use correct options so I have to use commands below: rmmod bttv modprobe bttv card=8 I add "bttv card=8" to /etc/modules but it does not help. My question is how to help etch use correct options so that I needn't enter

Can I use kernel 2.4 in etch?

Thanks! -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Re: which package can display chart?

at 11:54:27AM +0800, Long Wind (longwind2...@gmail.com) > wrote: >>> Even after installing all security updates, >>> can you be sure your system is safe? >>> There may be new security problem discovered at any time >>True. You can never be 100% sure. But: >

Re: which package can display chart?

10:18 AM, Boyd Stephen Smith Jr. wrote: > On Monday 23 March 2009 20:49:33 Long Wind wrote: >>You just make me feel nervous >>I already worry too much! >>Evne shrinks can't help > > I do not generally like to add to other troubles, but making you nervous was >

Re: which package can display chart?

You just make me feel nervous I already worry too much! Evne shrinks can't help On 3/23/09, Boyd Stephen Smith Jr. wrote: > On Sunday 22 March 2009 23:40:55 Long Wind wrote: >>I can't write patch >>IMO sarge and Linux in general is pretty safe >>In contrast Wind

Re: which package can display chart?

done and done better, but it requires efforts on my part (learning new software, trying...)) On 3/24/09, Javier Barroso wrote: > On Mon, Mar 23, 2009 at 4:44 AM, Long Wind wrote: > >> I have tried etch; >> and I have installed lenny >> IMO, sarge is better than both >&g

Re: which package can display chart?

I can't write patch IMO sarge and Linux in general is pretty safe In contrast Windows often has virus and strange problems (maybe caused by hackers) I have never seen crash or attack in Linux On 3/23/09, Boyd Stephen Smith Jr. wrote: > On Sunday 22 March 2009 22:44:45 Long Wind wrot

Re:which package can display chart?

I have tried etch; and I have installed lenny IMO, sarge is better than both Thanks! -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

which package can display chart?

I have stock price data in a text file : high, low, open, close of each day I want a software that can show the data in a chart that use bars to represent data. Which package in sarge can do the job? Thanks! -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "

(SOLVED)Re: need help on shell programming

Thank you very much! On 2/26/09, Kumar Appaiah wrote: > On Thu, Feb 26, 2009 at 3:54 PM, Long Wind wrote: > > I want a script. > > The script run a command, wait one minute, > > then run the command again, wait one minute again > > ... again and again ... > &

need help on shell programming

I want a script. The script run a command, wait one minute, then run the command again, wait one minute again ... again and again ... Thanks! -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

problem with IPTABLEs

Thanks to those who reply! Gmail has changed! it combine many mails into one. I am confused. I am mad. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

problem with IPTABLEs

I want to specify a domain name in rules but the domain name often changes IP Is there anything I can do about it? -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

<    1   2   3   4   5