Osamu Aoki wrote:
On Sun, Jun 30, 2002 at 11:02:16AM -0700, Larry Smith wrote:
I run Potato, which installs with glib 1.2.
I notice that recently made applications require newer glibs, such as
glib 2.x
Is it possible to update the glib version on Potato, or must I update
my entire
[EMAIL PROTECTED] wrote:
I can't get umount to unmount my cdrom or floppy drive (at least not in a
reliable way). So far I have had one horrific crash as a result of this
problem :-( . I have tried a lot of different options and read a lot but
have seen no solution to device busy etc. I am
On Mon, Jun 24, 2002 at 05:10:15AM -0400, Abdul Latip wrote:
What file are you trying to read. If it is mail coming from fetchmail,
there were some change which causes ^M in mail file.
It is ftp://ftp.isi.edu/in-notes/rfc-index.txt
I believe that that file does not have ^Ms.
Aaron Maxwell wrote:
shiznit:~# df -h
FilesystemSize Used Avail Use% Mounted on
/dev/hda1 11G 4.5G 6.0G 43% /
/dev/hda2 926M 65M 814M 8% /mnt/hda2
Note that:
1) /dev/hda2 is smaller than it should be.
2) /dev/hda3 could not be mounted
Petr Vanek wrote:
On Mon, Jun 17, 2002 at 09:12:41AM +0800, Dan Jacobson wrote:
If one sometimes uses aptitude sometimes uses synaptic sometimes uses
dselect, and in each sometimes quits out after making his selections
and then not following thru and installing the packages, can this lead
Dan Jacobson wrote:
I have two CDROM drives. This is apparently not noticed upon debian
woody installation. Swifteax. Neateaux. I suppose the distributions
of the pros consider that a personal issue or something.
I think you're being paranoid.
OK, so I must do this myself. OK, I make
Frank Brodbeck wrote:
All worked pretty
fine and then suddenly I heard this strange sound from my harddrive.
It twanged like the read/write header of the hdd would somehow hang.
First of all, the system just froze for several seconds but after
short time the system started to freeze
Ted Goodridge, Jr wrote:
What package has the header files/libs for ncurses?
libncurses5 shared libs
libncurses5-dev headers/static libs
You can use apt-cache to find this stuff out very easily.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
Dave Price wrote:
screen will do what you like - type screen, run you command, ^A^R to
detatch, screen -r later on to reconect.
Screen is the best tool for the job IMO, but the detatch command is ^Ad,
not ^A^R. Best just to read the screen man page anyway.
--
To UNSUBSCRIBE, email to [EMAIL
Bill Moseley wrote:
Ok, I have to ask.
What's the equivalent to windows, mark text to copy, Ctrl-C, move mouse,
mark text to replace, ctrl-V to replace?
I often find my self highlighting some that I want to paste someplace
else. But that someplace else (like a Location entry for a
Patrick Kirk wrote:
In .muttrc I have this:
set editor=vim -c 'set filetype=mail' # Must wrap mail
Has anyone got this combo working right? Because mutt won't wrap at
all.
I just use:
set editor=vim -c 'set tw=72 expandtab'
(in my .muttrc, of course)
Matthew
--
To UNSUBSCRIBE, email
curtis wrote:
Question:
In order to mount at boot windows shares I have the following fstab entry:
//Server/sharename/home/Serversharesmb
username=user,password=password12
[cut]
Surely there is a way to not have to enter my username and password in
the fstab. Or is
Hi John,
John Lynch wrote:
I just read the Debian installation manual. And most of it went over my
head. I have never used a Linux OS before, and I don't know THAT much about
computers, however I am learning.
Debian is a wonderful Linux distribution, but it far from the easiest to
install for
Alan Poulton wrote:
Tuesday, March 19, 2002, 10:23:52 PM, Matthew Dalton wrote:
You could try an internet install, but I doubt you'll be able to get
your system connected to Telstra Cable without a working system first,
so it's kind of a chicken-egg problem.
I just wanted to point
dman wrote:
On Tue, Feb 26, 2002 at 11:58:41AM -0500, Ed Lawson wrote:
|
| On Tue, Feb 26, 2002 at 08:58:35AM -0600, David Bell wrote:
|
| |
| | Change all references to 'stable' in /etc/apt/sources.list to 'testing'
| | and run apt-get update apt-get -u dist-upgrade. You're now
will trillich wrote:
i never have understood the command
line args portion of modconf: Please enter any command-line
arguments for the XYZ module. Many modules can autoprobe and do
not require additional parameters. i don't understand the
syntax needed.
The 'command line args' portion of
dman wrote:
It isn't too surprising that it still has a 2.0 kernel packaged for
it, (in fact, .38 must be fairly new since I thought the 2.0 series
ended at .36) but the installer uses a 2.2 kernel.
Not only did the 2.0 series not end at 2.0.36, but it is still going.
2.0.40-rc3 was released
Vineet Kumar wrote:
* Abner Gershon ([EMAIL PROTECTED]) [020220 09:01]:
Can someone tell me search and replace commands I can
use to convert comma delimited text in form:
field 1,field 2,field 3
to text file to be used in tabular latex file of form:
field 1 field 2 field 3
[cut]
Dave Price wrote:
Question...
Can CDRW media be reused with cdrecord (burning ISO images)? If so,
how does one go about 'erasing the media first?
cdrecord has a 'blank' option. Read the cdrecord man page ('man
cdrecord').
Jason Stechschulte wrote:
Since I can't seem to remember to turn down the speakers
before rebooting, is there something I can do about this behavior?
Have you tried using a mixer program to change the volume in Linux?
Aumix might be a good starting point.
Charles Baker wrote:
Are there any cvs guru's on the list? I had some files
that had previously been checked into cvs. There were
also some files in the same project which had not been
checked in ever.
I moved the source to a different machine where I had
set up a new repository. I
Seneca Cunningham wrote:
Do think it is possible for me to get it onto my 386 with 1M RAM?
I think you might be struggling with only 1Mb of ram to get any Linux
distribution running.
Even Small Linux (http://www.superant.com/smalllinux/) requires a 386
with 2Mb ram.
ben wrote:
one if my /dev/ files has a mysterious date of 0 april 2001. has anyone had
this before. can i/should i manually reset that, and, if so, how is it done?
Are you sure you're reading the ls output right?
In my /dev directory I have an entry:
brw-rw1 root disk
Sam Varghese wrote:
On Tue, Jan 15, 2002 at 03:52:06PM -0600, Lance Hoffmeyer wrote:
Does anyone know of a console editor that might be similar to
Winedit? I am moving a number of people from Windows to
Linux and all they know is Winedit. I don't want to put
them through the grief of
Mirek Dobsicek wrote:
I have 2 questions:
I was thinking that /etc/mtab is a fixed file ... but it looks it is
beeing written during starting the system
/etc/fstab is the file you're after.
Penguin wrote:
Potato fails to recognise my video card and I am lost and confused about my
modem, since I can't get the packages with my Internet connection (not one of
them) because when I specify HTTP or FTP as a source for packages, it fails
to dial my ISP. Also, once I had setup wvdial,
Tobias Wolter wrote:
On 2001-12-03T17:42:51 +, Reena Mahbubani wrote:
I was wondering how you access your floppy drive from the command line
mount /dev/fd0 /mnt
Then cd /mnt and voila, there you have your floppy drive.
If you're using DOS formatted disks, it's much easier to use
Jeffrin wrote:
Is there any chat channel specific to gtk programmer's ?
Try looking at http://www.gtk.org
DvB wrote:
Jeffrin [EMAIL PROTECTED] writes:
Hello all
Can anything be done in emacs to eliminate space after a comma or a
full stop ?
hmm... run some kind of replace-regexp maybe? Don't know how much emacs
regexps support though.
Personally, I'd probably just run it
Ian Balchin wrote:
Karsten Matthew,
Thanks, you have cleared up the mysteries for me. Well,
almost.
s, if Debian is looking for a bashrc or profile file, it
won't mind if it has a dot in front or not, right? :
Not exactly...
If it's in your home directory, it's got a
Ian Balchin wrote:
I wanted to colorise the prompt. Also (down the road) I wanted to
get some colour to joe (they have it yellow and red at the local
university) as it is a bit bland with everything white on black.
This is something that Joe itself must support for it to work. I don't
know if
Sunny Dubey wrote:
how come the followind doesn't seem to work ...
for i in `ls -1 /some/dir` ; do
cat /some/dir/$i /usr/fruits.txt
done
cat just gives me the odd error of files not being found, however, I can't
see why the files wouldn't be found ... hrrm ...
thanks much for
Osamu Aoki wrote:
On Wed, Oct 31, 2001 at 10:50:56PM -0500, [EMAIL PROTECTED] wrote:
here's a question I can't seem to find an answer to..
why does GNU make automatically compile .cpp files, but with .cxx
files I have to explicitly add a g++ line in the make file?
There is no rule for
dman wrote:
Ditto for vim.
See :help textwidth and :help formatoptions for more details. For
writing mails (such as this) I use :set tw=70 fo=tcq. (BTW this can
be added to the .vimrc and executed automatically or it can be typed
as shown.)
You can also set options for individual files
Hall Stevenson wrote:
No worries here... Using seperate physical drives makes things
much easier. This will actually be a LILO 'issue', but it can
handle it just fine. One thing: Install Lilo to your 'first'
(/dev/hdaX) hard disk's MBR.
Don't install LILO to the MBR! If Windows 2000 is
Laurent PETIT wrote:
I tried route : it does'nt work, it doesn't even want to give me the
prompt,
What about 'route -n'?
'route' by itself does DNS lookups, so maybe that's where your problem
lies (or maybe you can't reach your DNS because of the broken route ;)
Matthew
Eric G. Miller wrote:
should i use something different?
Use the -ko flag to add in CVS for the generated files to stop keyword
expansion. If you want to use keyword expansion, then you have to be
careful in your usage (especially with perl or shell scripts).
You can change/add -k flags to
thomas anderson wrote:
I want to try to put a perl script in the /usr/lib/perl directory however I
don't have permission access...I tried symlinking it but it still won't work.
is there I way to do this without becoming root or sudo?
I think you misunderstand how Unix/Linux systems are
jennyw wrote:
Is this normal? I tried installing exim and sendmail instead, but the
same thing results. Do I have to do something special to get the spool
files created? Do I have to do something special to get the postfix
(or whatever) to write to the spool files?
Postfix probably creates
Oki DZ wrote:
It seems that libc6 has to be upgraded too; what are the consequences of
having unstable libs on a stable machine?
Why not compile your own modutils package from the sources in unstable?
You don't need to upgrade glibc then.
Well, actually, my question
is: what unstable
Matthew Dalton wrote:
Oki DZ wrote:
It seems that libc6 has to be upgraded too; what are the consequences of
having unstable libs on a stable machine?
Why not compile your own modutils package from the sources in unstable?
You don't need to upgrade glibc then.
Instructions
Karsten M. Self wrote:
- What happened to Klyx? The homepage is 404
http://www.lyx.org/~ettrich/klyx.html, and its parent suggest it
won't come back any time soon http://www.lyx.org/~ettrich/
(K'mon, people:
http://kmself.home.netcom.com/Linux/FAQs/backups.html).
Luckily,
Sorry about the last post... my fingers slipped on the 'send mail' kb
shortcut. That's what I get for using Netscape messenger...
Karsten M. Self wrote:
- What happened to Klyx? The homepage is 404
http://www.lyx.org/~ettrich/klyx.html, and its parent suggest it
won't come back any
Karsten M. Self wrote:
That doesn't work for me. I've found in the past that Google uses
distributed servers, on which content may vary. Could you resubmit the
URL above resolving a numeric IP for your local Google server?
Try:
Cameron Matheson wrote:
I'm having a little trouble w/ apache. When I go to my page (www.mifix.net),
it says i don't have permission to execute the script. Everything's fine as
far as permissions on the script go, so I'm assuming this is something
wrong w/ my httpd.conf, anyone seen this
John Willey wrote:
Feeling rather silly, but I don't seem to have anything in this
directory. I was trying to compile the drivers for a Linksys 10/100
PCI card, and it couldn't find various files. I checked, and
discovered that nothing is in there.
It's looking for the kernel headers.
Jaye Inabnit ke6sls wrote:
I am getting this now in my private email here as well as via the debian-user
list. I assume my address came from this list. Are others on this list
getting this personally too?
Yeah, the lowlife spammer scum sent one to me as well.
William Leese wrote:
also, is it 'safe' to use hdparm when having reiserfs partitions?
If you used it with ext2 partitions, I don't see why using it with
reiserfs would be a problem. It's all disk access.
I'll be doing the following:
1) backup each dir and its subdirs with tar (tar cf
William Leese wrote:
3) rm -rf /usr, /lib.. etc after mounting the vfat partition which also
contains a copy of /sbin and /bin untarred.
Hmmm... aren't there important things in /lib, namely libc?
would that be needed for running mkreiserfs, tar and perhaps a few other gnu
tools?
David Carlile wrote:
Thank you very much. I don't feel too dumb... There wasn't any sort of error
message.
There would have been one if you had run it from an xterm. Try it and
see - load an xterm and type netscape. If you're root, you'll see the
error.
The restriction that Netscape can't be
Michael P. Soulier wrote:
/rant
Are you talking about one or two HOWTOs in particular? Which ones? Could
it be that these HOWTOs are distribution-specific?
Joe 'Zonker' Brockmeier wrote:
I don't use Mutt all the time, but you can set it to 72 by
typing
:set columns=72
If you're using a vi-type editor. You can tell mutt what editor
to use by setting that up in a local .muttrc - and then set
up your vi clone to default to 72 columns if
will trillich wrote:
Point me to the faq -- i don't know where to look for it or what
it might be named...
Objective: to create a bootable CD for a Debian network
hub-like system that'll have NO hard drive (and probably no
keyboard or monitor, either). booting from
Dumb wrote:
I don't really have an answer, but sometimes on my machine I have to hold the
button for like 5 seconds before it shuts off, and at other times it just
shuts
off with no problem.
I don't have an answer either, but I have had interesting experiences
wrt auto power off.
Windows
Brian May wrote:
I have heard rumours of it causing data corruption on 2.4.x kernels,
including 2.4.3.
That's interesting. Where did you hear about the corruption under 2.4.3?
I have never had a problem with it myself though...
I haven't had any problems with it either, but I haven't
Karsten M. Self wrote:
$400 USD cost more than my computer cost
Completely irrelevant.
I wish I could say that. I'm a student I don't have extra cash.
This and your other responses are largely irrelevant. Bordering on
tiresome. System administration, like economics, is about
Jonathan Gift wrote:
I don't think so. I have an old, very old, laptop floating around with
2MB ram on it. Anyone know of a Linux distro that will run on it? Maybe
one of the embedded one's?
If it's a 386 or higher you might find a floppy based distro that will
run on it. http://lwn.net has a
francisco m . neto wrote:
I one does so, and installs the package using dpkg, won't the
apt-get database get dependency problems when one tries to install
some other package that depends on the first package?
The apt-get database and the dpkg database are one and the same.
Actually,
stephen wrote:
I'm having a heck of a time getting my system time set correctly.
/etc/localtime is a symlink to the proper time zone. I've looked in
/etc/default/rcS and switched UTC from yes to no and back again.
And, I've read the man page for hwclock a few times. Still,
my system time
Michael Dickey wrote:
eth0: Xircom Cardbus Adapter (DEC 21143 compatible mode) rev 3 at 0xa00,
00:10:A4:E6:B8:2E, IRQ 3.
eth0: MII transceiver #0 config 3100 status 7809 advertising 01e1.
serial_attach(bus 35, fn 1)
tty00 at 0x0a80 (irq = 3) is a 16550A
Does it work if you don't have your
Matheson Cameron wrote:
XAnim Rev 2.80.0 by Mark Podlipec Copyright (C)
1991-1999. All Rights Reserved
Video Codec: Sorenson Video not yet supported.(E18)
Sorenson Video not supported, and is not likely to be for a while yet
due to patents, agreements between Sorenson and Apple, and Apple
Tomaas Ortega wrote:
ive had the same problem when it comes to installing natsemi drivers for my
netgear ethernet card.
2.4.x have the modversion files but it seems 2.2.x do not. I just edited the
source. all works perfectly now...
I believe that this file is created when you do 'make dep'
Jason Majors wrote:
Try upgrading to 4.x it supports more cards, and I'm not sure if the v3 is
supported by 3.3.6 (plus 4.x is just sooo much better).
The Voodoo3 is supported by Xfree86 3.3.6.
I think it would be better for this guy to get some experience with
Linux before he attepmts to
Jimmy Richards wrote:
There is something I have been confused/wondering about for some
time. I thought I once saw someone say in their reply that they
didn't need to Cc: to debian-user@lists.debian.org when replying to
a message because they are already signed up on the mailing
Alexander Poquet wrote:
However, I was unable to play the MP3s off the CD -- I presumed this was
because I have an old computer whose CD read speed was simply too slow.
How slow?
I used to have problems reading some (not all) CD-Rs with my old 2x
cdrom. The problem was just that the drive was
Alexander Poquet wrote:
How slow?
I'm actually not sure, because I didn't buy the computer. Is there
some way to tell how fast Debian thinks it is?
I don't know...
Well, as it happens, the CDR that works (the Debian one) and the CDRs
that don't (the MP3 M$ formatted ones) are the same
Bill White wrote:
You've never used Windows ME have you?
I once interviewed with someone who said that If you don't reboot
Windows 10 times a day you aren't working hard enough. Of course,
when I worked on Linux device drivers I had the same thoughts.
That's fair enough... I mean, device
Paul D. Smith wrote:
I did this a few months ago and wrote it down; try this and see if it
helps:
http://www.paulandlesley.org/linux/debian_tt.html
If you've got the doc-linux-text package installed, you'll find the
truetype-debian howto somewhere under /usr/share/doc/HOWTO/en-txt/ (I
Michael P. Soulier wrote:
Hey people. I heard a rumour that the toshiba laptop I have works with
Slackware, so while I wasn't able to get Debian's boot disks to work, the
Slackware bootamp.i image worked great. Is there a Debian laptop-specific boot
disk?
Toshiba laptops have a problem
John Travis wrote:
Is there an easy way to reconstruct the basic heirarchy and files for /var?
I had a reiserfs meltdown after installing 2.4.2.
When you say 'meltdown', what exactly do you mean? Can you go into more
detail about what appeared to happen? What kernel version did you
upgrade
CaT wrote:
On Mon, Feb 26, 2001 at 12:18:01AM -0600, Jason N. Price wrote:
Okay, I just did something that, in hindsight, was very stupid. :) I have
been getting a lot of errors from gzip, so I decided to apt-get remove it
and then re-install it. I removed it, but I now seem unable to
Brendan J Simon wrote:
When I use VIM in an X terminal (eg. gnometerm), I can't use the cursor
keys to navigate whilst in insert mode.
*However*, if I have a ~/.vimrc file with nothing in it, I *can*
navigate with the cursor keys in insert mode.
Very strange. Is this a bug or have I got
M David Tilson wrote:
You didn't do 'cp foo /dev/hda1', did you?
Probably yes. Is there any way to recover?
Have you tried running fsck.msdos under Linux?
M David Tilson wrote:
Tried to cp a file from hda2 (linux) to hda1 (fat16). Now lilo
cannot find anything on c: to boot.
You didn't do 'cp foo /dev/hda1', did you?
Michael P. Soulier wrote:
So I'm told I need scsi emulation for my IDE CD writer and xcdroast. So, I
recompile 2.2.18pre21 with scsi support, emulation and scsi cdrom support.
xcdroast still complains.
[cut]
Help?
http://www.linuxdoc.org/HOWTO/CD-Writing-HOWTO.html
Guilherme Barile wrote:
From a computer in the 10.0.0.x network I can ping the internet (via ADSL)
and any computer on the 10.0.1.x network (vice versa for the computers on
the 10.0.1.x net) BUT, i cannot access the servers connected to NIC2 (eth1)
directly I need some special rule for
Alvin Oga wrote:
/etc/auto.master
/.autofs/etc/auto.misc --timeout 600
I found that with the debian autofs init script (/etc/init.d/autofs),
the timeout option wasn't parsed properly unless it was specified like
so (YMMV):
/.autofs/etc/auto.misc timeout=600
Todd V . Rovito wrote:
It seems like I am missing my standard C man pages.
Is there a way to get these installed?? I am sure its
apt-get install something, what is the something?
Have you tried looking for it with apt-cache search man?
(That's 'apt-cache search man', not 'apt-cache search,
Dr. Aldo Medina wrote:
I'm trying to connect my PII 350 with Debian 2.2r2 potato (kernel
2.2.17) with my PIII 800 with Debian woody (2.2.18 recompiled) using a
laplink cable.
I've followed PLIP-Howto steps, but even when I already
tried two cables (which work under Windows, I know this
Chris Majewski wrote:
No idea, but I had the same problem last summer, and gave up (I was
setting up a new machine and ended up transferring the data via 100M
Zip disks)..
Well, I've done it. It's how I installed debian slink onto my laptop
(over a year ago now). I used an anonymous ftp
Forrest English wrote:
Be a real
friend and help them start off with the
*right* distribution.
or you could get down off your high horse...
realize that linux, is still linux. all of those still have a lot of
debian's good parts there, basicaly with some gui config tools, which are
Zac Epkes wrote:
I was unable to see who said there where no Viruses for UNIX based systems, i
jsut
wanted to tell anyone and everyone, im sure there are Virueses for ALL
systems of
anykind, even that old TANDY or whatever you can pull out of your closet/attic
(hehe im only 17 here) im
will trillich wrote:
hardware newbie
whenever i move my mouse -- for every single pixel (or every
mouse pointer redraw) -- i hear a small 'click' through my
speakers. this happens on both console (alt-ctl-f[1-6]) and in X
displays...
any ideas? what further information could i provide?
Brooks R. Robinson wrote:
Spam. The other other white meat ;-).
I thought Spam was pinkish
I thought the other other white meat was baby...
will trillich wrote:
On Wed, Feb 07, 2001 at 01:11:13PM +1100, Matthew Dalton wrote:
Brooks R. Robinson wrote:
Spam. The other other white meat ;-).
I thought Spam was pinkish
I thought the other other white meat was baby...
that's funny to someone who's never had, only
Hunter Marshall wrote:
[EMAIL PROTECTED]:/tmp
- od -x junk
000 6968 0a0a 0a0a 0a0a 000a
011
[EMAIL PROTECTED]:/tmp
- perl -n -e 'print yup\n if /\x0a/;' junk
yup
yup
yup
yup
yup
yup
yup
[EMAIL PROTECTED]:/tmp
- perl -n -e 'print yup\n if /\x0a\x0a/;' junk
This one-liner is
T. Green wrote:
HELP -- NOVICE
I am tring to install software from my cdrom and i keep getting the
following responce.
bash: /Setup.sh: permission denied
My question is why, i am in root.
help
Maybe you have mounted your cdrom with the 'noexec' option?
Check in your /etc/fstab for
Rino Mardo wrote:
yeah! :-) well the prospector can also be at the same level as sid.
I for one can't wait to be installing the Debian 'Stinky Pete' release
;)
Jorge wrote:
Last day linux gives me this error:
Unable to handle kernel null pointer dereference at virtual adress
0024 current tss.cr3 = 2d6c5000, %cr3 = 2d6c5000 *pde =
and after that hungs up.
This Linux has kernel 2.2.15 with 2 GB RAM and 1GB Swap.
Try updating to
mike polniak wrote:
Arcady Genkin wrote:
I'd like to install Perl 5.6, without upgrading potato's default
5.005. Do you think that if I installed Perl 5.6 under /usr/local and
renamed the executable to perl-5.6 for instance there would be any
issues with using it or it interfering with
Ethan Benson wrote:
On Thu, Jan 25, 2001 at 03:39:49PM +1100, Matthew Dalton wrote:
The alternatives system probably takes care of it. /usr/bin/perl is
probably a symlink to /etc/alternatives/perl, which is in turn a symlink
to either
Martin Fluch wrote:
On Mon, 22 Jan 2001, Matt Miller wrote:
How do I detect packages on which nothing depends? I know I
must have accumulated a number of these that I no longer want.
Short of running dselect (or storm?) and performing a package-
by-package examination, what can be
Cameron Matheson wrote:
I wanted to install wmaker for my newly compiled X4, but I can't
because it requires me to install xfree86-common and xlib6g. This
won't do, so I put those two packages on hold, but then it comes up
with the dependancy problem screen, with them re-selected. Why
If there were a FAQ for this list (is there?), this would be the first
question in it.
Ken Weingold wrote:
what happens is that applications
don't release memory when they are done.
Ken Weingold also wrote:
6:13pm up 20 min, 2 users, load average: 0.00, 0.00, 0.00
27 processes: 26
Matthew Dalton wrote:
Mem: 517500K av, 49412K used, 468088K free, 14644K shrd, 22516K buff
^^^
There's your 'free' memory.
Line wrapping killed the meaning...
22516K buff - that's the bit I meant... :/
^^^
Erik Steffl wrote:
http://gimp-print.sourceforge.net
thanks for the response. I did install the gimp-print but:
[cut]
I haven't actually used gimp-print... I don't own a colour printer, so I
don't know the answer to your questions (although someone else on
debian-user might).
A good
Erik Steffl wrote:
I have epson stylus color 740 printer and cupsys 1.1.4-3
the printing seems to be working but:
lp -d epson740 picture.jpg # 360 dpi
prints a picture but it's ugly, the colors are quite off (not
completely off, just noticeably different)
Like I said to
Jay Ford wrote:
Text printing works, which is good. The problem is that graphic
(PostScript...) doesn't work well or at all, probably because I don't have
the right printcap entries, gs devices, and/or magicfilter filters. I dug
through the HOWTOs, list archives, other places, but can't
Lachlan Patrick wrote:
Is slink archived anywhere? A year ago I installed slink on
my venerable 486/8MB system and it worked like a charm.
Now, slink is apparently gone from the net, so if I just
want to install a few packages for my 2.0.38 kernal, how
do I do it? I'm a big fan of the if it
David Shepherd wrote:
I've just switched from Redhat 6.2 to Debian 2.2r2 and can't get my
DeskJet695C working.
Everything worked fine under RH using printtool to set it up.
[cut]
When I try
echo this is a test /dev/lp0
I get
su: /dev/lp0: No such device
Have you
1 - 100 of 286 matches
Mail list logo
