Am 26.02.2017 um 13:26 schrieb Teemu Likonen:
> I would like to hear some ideas on how to set various environment
> variables (PATH, MANPATH, EDITOR etc.) in one place that would make them
> effective everywhere. My "everywhere" means:
>
> - X session started through lightdm and ~/.xsession
Am 06.02.2017 um 00:12 schrieb Ben Caradoc-Davies:
> On 06/02/17 09:59, Matthias Bodenbinder wrote:
>> Am 05.02.2017 um 09:03 schrieb Matthias Bodenbinder:
>>> Hi,
>>> I have upgraded my PC to newest chipset and CPU: Kaby Lake, Z270 with
>>> i7-7700K.
>>&
Am 05.02.2017 um 09:03 schrieb Matthias Bodenbinder:
> Hi,
>
> I have upgraded my PC to newest chipset and CPU: Kaby Lake, Z270 with
> i7-7700K.
>
> Out of curiosity I did a kernel benchmark. Comparing darktable performance
> with kernel 3.16.0-4-amd64 and 4.9.0-1-amd64
Am 05.02.2017 um 09:49 schrieb deloptes:
> have a look at the code changes.
Looking at the code changes from 3.16 to 4.9 ?
Good idea. I will start right now ;-)
Matthias
Hi,
I have upgraded my PC to newest chipset and CPU: Kaby Lake, Z270 with i7-7700K.
Out of curiosity I did a kernel benchmark. Comparing darktable performance with
kernel 3.16.0-4-amd64 and 4.9.0-1-amd64. I use the following command to run
darktable:
darktable-cli test.CR2 test.jpg --core -d
Am 04.02.2017 um 17:43 schrieb Jude DaShiell:
On Sat, 4 Feb 2017, Matthias Bodenbinder wrote:
Date: Sat, 4 Feb 2017 09:07:00
From: Matthias Bodenbinder <matth...@bodenbinder.de>
To: debian-user@lists.debian.org
Subject: Re: can not set time
Resent-Date: Sat, 4 Feb 2017 14:07:22 +000
Am 04.02.2017 um 15:49 schrieb Matthias Bodenbinder:
More info:
I switched to systemd and systemd-timesyncd. During boot the time is synced
back and forth multiple times and in the end it stays wrong.
Look at this. See the timestamps for each line. Going back and forth.
Feb 04 15:59:06
More info:
I switched to systemd and systemd-timesyncd. During boot the time is synced
back and forth multiple times and in the end it stays wrong.
Look at this. See the timestamps for each line. Going back and forth.
Feb 04 15:59:06 broken-PC systemd-timesyncd[475]: Using NTP server
Sat, 4 Feb 2017, Matthias Bodenbinder wrote:
timedatectl set-ntp true
did not help. It is not changing the time.
My reference PC has debian testing running with systemd-timesyncd. But the
broken PC is MINT LMDE which is still on init.d.
Matthias
Hi,
I have a weird issue with one of my debian boxes (LMDE): I can not set the
time. The time is off by ca. 14 min and whatever I try to fix it is failing. I
tried ntp, ntpdate, date and rdate. Nothing helps.
ntpdate shows the offset but is not fixing it.
91# ntpdate 0.debian.pool.ntp.org
4
Am 25.01.2017 um 20:04 schrieb Michael Lange:
Hi,
On Wed, 25 Jan 2017 07:18:07 +0100
Matthias Bodenbinder <matth...@bodenbinder.de> wrote:
(...)
I do not have that file /etc/apt/apt.conf.d/02periodic. I put
/etc/cron.daily/apt back where it belongs and this morning the pinning
was scre
Am 23.01.2017 um 11:47 schrieb Michael Lange:
Hi,
On Mon, 23 Jan 2017 08:40:32 +0100
Matthias Bodenbinder <matth...@bodenbinder.de> wrote:
(...)Yes, this is exactly what happens on my PC. But it has no solution.
In the meantime I found a workaround. I moved /etc/cron.daily/apt out
of t
Am 12.01.2017 um 20:31 schrieb Sven Hartge:
Matthias Bodenbinder <matth...@bodenbinder.de> wrote:
What is going wrong here? Any idea?
Possibly https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=849382
Grüße,
Sven.
Yes, this is exactly what happens on my PC. But it has no so
Am 12.01.2017 um 19:43 schrieb Michael Lange:
Just a shot in the dark:
maybe the apt-get update at boot time is done before a network connection
has been established? I noticed that this can lead to the exact behavior
you describe when pinning is in use. Apparently a bug in apt.
Regards
Hi,
I have a weird behaviour on one of my debian boxes. It is running Mint LMDE and
the issue is the following:
I have several additional sources defined: debian testing, debian backports,
etc. I have defined priorities for the repos so that testing has prio 300 and
does not replace the
Hi,
I have a weird signature issue with an LMDE Mint repository. I know that this
is not pure debian but nevertheless I think my question is best posted here.
The issue is: I have 4 PC and 1 laptop at home. All running LMDE2. When I do
"apt-get update" the PCs have no issue. But the laptop
Hello Andy,
I am trying to stay with newest versions as long as it does not jeopardize
stability.
I am using Mint LMDE2 with debian backports. So I do have kernel 4.4+71~bpo8+1
running.
btrfs tools are from debian stable, which has version 3.17. I am wondering if
it would make sense to also
# ll -h
insgesamt 698G
-rw-r--r-- 1 root root 698G Apr 16 20:03 file.zero
Thank you for helping me!
Matthias
Am 16.04.2016 um 13:35 schrieb Luis Felipe Tabera Alonso:
> On sábado, 16 de abril de 2016 12:05:05 (CEST) Matthias Bodenbinder wrote:
>
>> 38# df -h /mnt/test/
>>
1.01GiB path /dev/sdi
Am 16.04.2016 um 12:05 schrieb Matthias Bodenbinder:
> Hello Luis,
>
> I followed that link which confirms that a btrfs raid1 out of these three
> devices should give 750 GB of data capacity. But his is not what I get.
>
> This is what I have:
>
>
is wrong. Either what I am doing is wrong or the web page is wrong.
Matthias
Am 16.04.2016 um 10:20 schrieb Luis Felipe Tabera Alonso:
> On sábado, 16 de abril de 2016 9:00:00 (CEST) Matthias Bodenbinder wrote:
>> Hello,
>>
>> I have 3 hard drive with 750 GB, 500 GB and 250 GB
Hello,
I have 3 hard drive with 750 GB, 500 GB and 250 GB. I want to use btrfs as
filesystem. This will be my first test installation of btrfs.
My target is to get redundancy as well as a 750 GB data capacity. So I was
thinking to create a raid0 with the 500 and 250 GB drive. This would
Am 06.12.2015 um 15:55 schrieb David Parfitt:
> (Setup info at end)
> I am considering upgrading the kernel my stable install to kernel
> version 4.2 from jessie-backports. The main purpose of this is to see
> whether it helps with the problem I have been having with sound.
>
> *My question is*
Am 06.12.2015 um 22:47 schrieb Klaus Jantzen:
> On 12/05/2015 08:56 PM, Myscelus wrote:
>> On 12/05/2015 08:55 PM, Klaus Jantzen wrote:
>>> Hi,
>>>
>>> due to a typing error - I wanted to say 'dpkg --add-architecture i386'
>>> but wrote 'i368' -
>>> I get the following error messages when running
Hi,
I have a strange problem with my PC booting while my newly aqcuired Technotrend
S2-4600 DVB-S2 USB box is connected.
When I start for the first time (cold boot with the usb box), everything is
fine. firmware is installed and I can watch TV with vdr and xine or vlc. No
issue. But as soon
Hi,
I wanted to have cinnamon 2.8 on debian testing. So I played around with the
lmde2 repos (betsy) in testing and managed to install cinnamon 2.8. In the
course of this activity I had to donwgrade a handful of packages. It is working
now. All is fine, except
When I do "apt-get
Am 09.11.2015 um 18:42 schrieb Francesco Ariis:
> On Mon, Nov 09, 2015 at 06:38:11PM +0100, Matthias Bodenbinder wrote:
>> Hi,
>>
>> I see digikam in unstable for a very long time now. But it is not coming
>> to testing. Why is that? Wasnt the push to testing supposed to
Hi,
I see digikam in unstable for a very long time now. But it is not coming to
testing. Why is that? Wasnt the push to testing supposed to be an automatic
process? Or does digikam in unstable still have critical bugs? What is the
reason for the delay?
Matthias
Hi,
I am running a debian 8 stable system and have some trouble with KDE or
KLauncher.
Every once in a while, directly after loging into KDE I can not launch a
program, e.g. iceweasel. The system seems to hang, not reacting to mouse
clicks. After waiting for a minute or so an error message
Am 09.05.2015 um 05:20 schrieb Charlie:
From my keyboard:
I have been looking through the man pages for: apt-get, apt-get upgrade,
but I'm certain I don't understand how I might hold a package for a
while?
Anyone who can and is inclined to help, might assist me for the
Am 01.05.2015 um 08:49 schrieb Avinash Sonawane:
Which is the standard/recommended way to set system wide proxy in
Debian instead of editing utility specific rc files (wgetrc, apt.conf
etc)?
I am aware of /etc/environment, setting http_proxy environ variable
and then export it, editing bashrc.
Am 01.05.2015 um 08:36 schrieb Michael Biebl:
It's a workaround.
So it might still be worth a bug report against the linux kernel.
I did that:
Bug#783934: Acknowledgement (linux-image-3.16.0-4-amd64:
systemd-udev-settle waiting 50 s during boot for snd-usb-audio)
Am 30.04.2015 um 16:57 schrieb Matthias Bodenbinder:
Am 30.04.2015 um 15:09 schrieb Michael Biebl:
As you can see above, systemd-udevd timeouts processing the events from
that device and is eventually killed. The internal timeout for udev is
90s. If you add the the remaining time to boot
Am 01.05.2015 um 00:00 schrieb Michael Biebl:
You could try blacklisting snd-usb-audio via
$ echo blacklist snd-usb-audio /etc/modprobe.d/no-usb-audio.conf
Maybe that helps (you might need to rebuild your initramfs as well)
This did the trick. The sound is disabled, the boot is fast and the
Am 30.04.2015 um 15:09 schrieb Michael Biebl:
As you can see above, systemd-udevd timeouts processing the events from
that device and is eventually killed. The internal timeout for udev is
90s. If you add the the remaining time to boot the system, that would
explain the 2min boot times.
This
Am 29.04.2015 um 19:23 schrieb Christian Seiler:
Just for the purpose of debugging, could you increase RateLimitBurst to
1 or so (i.e. 10x the default value) in /etc/systemd/journald.conf
and reboot? (Set it back again after you're done deubgging, else your
logs might get flooded.)
The
Am 29.04.2015 um 10:32 schrieb Christian Seiler:
Just use journalctl (without -b) to see all messages (they are
still in RAM in the journal - as per the log you posted, journald
will use up to 80 MiB [2] which is more than enough to keep all
3000 or so messages). Just look through them (there
Am 29.04.2015 um 15:28 schrieb Michael Biebl:
Am 29.04.2015 um 10:32 schrieb Christian Seiler:
Am 2015-04-29 07:15, schrieb Matthias Bodenbinder:
systemd-analyze blame:
56.397s systemd-udev-settle.service
Yeah, that shouldn't happen.
Matthias, do you have any custom udev rules
Am 28.04.2015 um 16:38 schrieb Michael Biebl:
An alternative is, to use systemd-timesyncd.service, which is already
shipped in the systemd package, but disabled by default.
It's more lightweight then ntp and doesn't do all the fancy tricks ntp
does. It also doesn't provide an NTP server.
For
Hello Christian,
first of all many thanks for your very detailed reply. This was excellent!
I activated systemd-udev-settle again and want to debug the situtation
according to your instructions (with udev.log-priority etc.).
Here is the time consumption:
systemd-analyze blame:
Hi,
I installed debian 8 on one of my PCs and got into trouble with extra long boot
times of 2 min. I found out that it due to systemd-udev-settle.service. My PC
is using lvm and that somehow interferes with systemd-udev-settle.service. The
web tells that systemd-udev-settle.service is needed
Hi,
I installed debian 8 on one of my PCs and found out that no ntp or ntpdate or
rdate is installed. How is debian 8 synchronizing the system time?
Greetings
Matthias
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
Am 29.03.2015 um 17:35 schrieb Michael Biebl:
Am 29.03.2015 um 11:42 schrieb Matthias Bodenbinder:
Am 28.03.2015 um 18:51 schrieb Michael Biebl:
You can run something like
systemd-inhibit --what=shutdown --mode=block /bin/sleep 3600
to block shutdown for 1h.
This does NOT work. I tested
Am 28.03.2015 um 18:51 schrieb Michael Biebl:
You can run something like
systemd-inhibit --what=shutdown --mode=block /bin/sleep 3600
to block shutdown for 1h.
This does NOT work. I tested it with debian testing.
It does not prevent shutdown through hte KDE GUI. And even on the commandline
Hello Michael,
that is a very good suggestion. Thank you. But I also have debian stable.
Do you have any idea for debain stable as well?
Matthias
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Hi,
how can I temporarily disable shutdown or reboot?
My use case is the following: I create a file /tmp/NO_SHUTDOWN. If that file
exists, a shutdown or reboot should not be possible.
I have molly-guard installed and a script in /etc/molly-guard/run.d/ tests the
existence of that file and
Am 18.03.2015 um 07:07 schrieb Matthias Bodenbinder:
Hi,
I am running debian testing and kde4. The icon theme is oxygen. But the
shutdown icon which is shown in the taskbar and in the menu is the shutdown
icon from the high-contrast theme. Basically this is black-and-white instead
Hi,
I am running debian testing and kde4. The icon theme is oxygen. But the
shutdown icon which is shown in the taskbar and in the menu is the shutdown
icon from the high-contrast theme. Basically this is black-and-white instead of
the red shutdowen icon from the oxygen theme. I opened the
Am 18.03.2015 um 07:07 schrieb Matthias Bodenbinder:
Hi,
I am running debian testing and kde4. The icon theme is oxygen. But the
shutdown icon which is shown in the taskbar and in the menu is the shutdown
icon from the high-contrast theme. Basically this is black-and-white instead
to lead that. Is that just an
iceweasel/firefox thing or intentional for the whole system?
Am 25.11.2014 um 09:28 schrieb Scott Ferguson:
On 25/11/14 17:17, Matthias Bodenbinder wrote:
Hi,
I am getting crazy with iceweasel not opening dolphin for containing
folders.
Hi, I run Debian
Hi,
since a few days I am getting the following message when applying the junk
filter to my inbox: This message contains an invitation to an event
I can not do anything about it and it does not tell me which message it means.
Any idea how to solve that?
7# dpkg -l | egrep icedove|iceowl
Hi,
I am getting crazy with iceweasel not opening dolphin for containing folders.
I searched the web for hours and tried everything I found.
Working with
mimeTypes.rdf in personal iceweasel folder
~/.local/share/applications/mimeapps.list
/etc/gnome/defaults.list (I am running KDE but have
I got it.
exaile needs gstreamer0.10-fluendo-mp3
Matthias
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: https://lists.debian.org/luh2o1$6r9$1...@ger.gmane.org
Hi,
I just installed exaile 3.3.2-1 for debian testing. But when I try to play my
mp3 files it says: no suitable plugins found. What is missing?
10# exaile
INFO: Loading Exaile 3.3.2 on Python 2.7.8...
INFO: Loading settings...
INFO: Using de_DE UTF-8 locale
INFO: Loading
Am 06.09.2014 um 15:29 schrieb Curt:
On 2014-09-06, Matthias Bodenbinder matth...@bodenbinder.de wrote:
Hi,
I just installed exaile 3.3.2-1 for debian testing. But when I try to
play my mp3 files it says: no suitable plugins found. What is
missing?
Maybe 'gstreamer ffmpeg' (shot
Am 06.09.2014 um 13:48 schrieb Chris Bannister:
On Sat, Sep 06, 2014 at 12:33:37PM +0200, Matthias Bodenbinder wrote:
Hi,
I just installed exaile 3.3.2-1 for debian testing. But when I try to
play my mp3 files it says: no suitable plugins found. What is
missing?
root@tal:~# apt-cache
Am 06.09.2014 um 13:48 schrieb Chris Bannister:
On Sat, Sep 06, 2014 at 12:33:37PM +0200, Matthias Bodenbinder wrote:
Hi,
I just installed exaile 3.3.2-1 for debian testing. But when I try to
play my mp3 files it says: no suitable plugins found. What is
missing?
root@tal:~# apt-cache
Hi,
somehow my system is running an apt-get update or something similar during
boot. Whenever I login after boot I can do a apt-get dist-upgrade directly
because the package list is already up to date. If I am too fast with the
apt-get dist-upgrade it even complains that the database is locked
Am 03.12.2013 08:59, schrieb Matthias Bodenbinder:
Hello,
somehow my computer does not automatically pop up with a message when I enter
a CD or DVD. Not in KDE, GNOME or XFCE. There is no automatic action at all.
I can not even see any log entries when closing the CD tray with a new CD
Hello,
somehow my computer does not automatically pop up with a message when I enter a
CD or DVD. Not in KDE, GNOME or XFCE. There is no automatic action at all. I
can not even see any log entries when closing the CD tray with a new CD. But it
used to work in the past. This is a new issue to
Am 03.12.2013 08:59, schrieb Matthias Bodenbinder:
Hello,
somehow my computer does not automatically pop up with a message when I enter
a CD or DVD. Not in KDE, GNOME or XFCE. There is no automatic action at all.
I can not even see any log entries when closing the CD tray with a new CD
Am 03.12.2013 09:15, schrieb Ralf Mardorf:
I have to add that I can mount the CD manually (mount /dev/sr0
/media/cdrom) without problem.
What was upgraded? Take a look at /var/log/apt/history.log, synaptics
history or what ever you are using to upgrade.
And what I also find strange is, that I do not see ANY log entry when I close
the tray with a new CD. Not in syslog, daemon.log, messages or user.log.
Can this be a dbus issue?
Matthias
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble?
Hi All,
I had MINT LMDE installed on my PC but moved back to Debian Testing. I did not
do a clean reinstall but simply changed the repositories and the pinning.
If I start the Help function now in a gnome terminal or nautilus - either via
F1 or Help menu - the system still opens the MINT URL:
Am 10.09.2012 20:28, schrieb Tom Rausner:
Hi Folks.
I have a tower PC with a serious motherboard problem.
It is unable to pass data from one place (say the harddisk)
to another (say a CDROM), without drowning it in errors.
I think some pathways in the motherboard is broken, so I want to
Hallo zusammen,
wie kann ich in KDE (Mint LMDE incoming distro) einstellen das bei
Ruhezustand/Tiefschlaf pm_suspend oder pm_hibernate aufgerufen werden?
Sowohl pm_suspend als auch pm_hibernate funktionieren wenn ich sie auf
der Komamndozeile aufrufe, aber wenn ich aus dem KDE Menu heraus
Hi,
I have posted the same question today in german language. Sorry for
that. Here it is in english.
I am running Mint LMDE with incoming repos = basically debian testing.
On the commandline I can suspend and hibernate the computer with
pm-suspend and pm-hibernate. But when I click on the
66 matches
Mail list logo
