I cannot get to a console, but X works fine. If my runlevel is set to
start graphically my monitor flashes Invalid Scan Freq three times and
then works fine. If I start in single user mode it flashes Invalid
Scan Freq forever. when I pass vga=ask to the kernel and select 80x25
the result is the
I am installing debian on a system with no removable media.
I am netbooting the installation using pxe, dhcp, tftp. This works
fine and I can start the installation. However, the install cannot
access my harddisk because the ide-disk.o modules is not found. That
the module is needed is
When I compile the Real Time Clock into my kernel I cannot complete
the boot process and login. This is true in single user mode.
Strangly, most of the boot process completes. The hang appears to
be in the
/etc/rcS.d scripts. The last message to the screen is WARNING:
nights). Is this buggy use
of dlopen? A glibc bug?
I can't seem to find any bugs assigned to binutils, glibc, or nvidia-glx
that describe this problem, but I don't want to file a bugreport before
I know that it isn't some borked configuration on my part.
Thanks in advance for any info.
Michael West
I am having some trouble figuring out how to get my Samsung ML-1710
printer to be shared with winXP.
I am using lpr. I can print fine from linux, and can see the printer
from XP. I can print gibberish from windows when using the same printer
as defined in printcap that I use in linux. I figure
On Sun, Oct 05, 2003 at 08:14:46PM +0200, [EMAIL PROTECTED] wrote:
How do I make procmail sort out the debian user list?
I've tried:
#Debian user
:0
* ^To:[EMAIL PROTECTED]
debian
But it doesn't work.
I use
:0:
* X-Mailing-List: \/[EMAIL PROTECTED]
`echo $MATCH | sed -e
My usb mouse no longer works after upgrading my kernel from 2.4.18 to
2.4.22.
I have found a few posts on this list and others with this problem, but
no solutions. Most notably:
http://www.mail-archive.com/[EMAIL PROTECTED]/msg13790.html
I have the same modules loaded, and the mouse is
am glad there is a command line option to do
this.
Is there a mic recording card available which could allow quality
recording directly to my laptop?
On Sun, Sep 14, 2003 at 12:20:44AM -0600, Jacob Anawalt wrote:
Michael West wrote:
I would like to record single track audio
I would like to record single track audio to my computer. I do not need
to sync to video, I have little interest in editing. However, I would
like high quality recordings. What do I need from a software/hardware side to
record org-vorbis or wav files from a high quality microphone?
--
In the
iptables -t nat -A PREROUTING -p tcp --dport 80 -i eth1 -j DNAT --to
192.168.69.2:25
you mean --dport 25 don't you?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Mon, Mar 31, 2003 at 07:24:49AM +0100, Alan Chandler wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 31 Mar 2003 12:32 am, John Hasler wrote:
Eric G. Miller writes:
To set the time explicitly, see the settime command of chronyc (info
chrony).
Setting the time
I haven't been able to get ssh to forward X11 traffic. I also get no
errors that I can find.
I have X11Forwarding yes in sshd_config and login with `ssh -X
hostname` but `echo $DISPLAY` gives '0.0' after successful login.
I see no errors on either the server or client side or an any logs I
have
On Mon, Mar 31, 2003 at 12:15:36AM +0200, Vincent Lefevre wrote:
On Sun, Mar 30, 2003 at 13:46:36 -0800, Michael West wrote:
I have X11Forwarding yes in sshd_config and login with `ssh -X
hostname` but `echo $DISPLAY` gives '0.0' after successful login.
Look at all the scripts (either
I am setting up a new gateway and it will not forward.
The gateway looks like:
eth0 10.0.0.2
eth1 10.0.1.1
eth2 10.0.2.1
-
route:
Kernel IP routing table
Destination Gateway Genmask Flags Metric RefUse
Iface
10.0.0.0*
On Sat, Mar 15, 2003 at 08:30:31AM -0800, Michael West wrote:
I am setting up a new gateway and it will not forward.
Forwarding is working fine actually. I found a problem with the routing
on the machine with the 10.0.0.1 interface. 10.0.0.1 can ping 10.0.2.2
but 10.0.2.2 still cannot ping
I have one machine that will not mount cdrom I make, though
store bought ones mount fine.
My own cds mount fine on my other two boxes.
The message I get on mounting is No medium found
The drive is actually a dvd-rom.
Kernel boot message is:
Toshiba
On Tue, Feb 25, 2003 at 04:56:10AM +1100, Russell Shaw wrote:
Michael West wrote:
On Mon, Feb 24, 2003 at 11:41:30PM +1100, Russell Shaw wrote:
Seperate cables to not mean seperate nets.
In my case they were all going into the same hub.
I haven't used hubs before. Do all
On Mon, Feb 24, 2003 at 03:10:40PM +1100, David Cureton wrote:
As an a-side but in a similar vein:
How can one ensure that the physical interfaces get assigned to the same
interface consistently after rebooting. Is the only way to explicitly specify
the physical interface/physical
On Sun, Feb 23, 2003 at 08:51:31AM -0800, Michael West wrote:
I am having trouble setting up a system for 3 nic cards with a monolithic
kernel ( 2.4.18 )
I tried passing kernel parameters
ether=11,0x2000,eth0 ether=10,0x4000,eth1 ether=9,0x6000,eth2
Now I can only ping all three addresses
On Mon, Feb 24, 2003 at 04:22:19AM +1100, CaT wrote:
On Sun, Feb 23, 2003 at 08:51:31AM -0800, Michael West wrote:
With this setup and only one card with a cable attached I can ping all
three addresses 10.0.1.10, 10.0.1.11, and 10.0.1.12. This is true no
matter which card is plugged
On Sun, Feb 23, 2003 at 07:48:45PM -0500, Fraser Campbell wrote:
On Sun, 2003-02-23 at 11:51, Michael West wrote:
With this setup and only one card with a cable attached I can ping all
three addresses 10.0.1.10, 10.0.1.11, and 10.0.1.12. This is true no
matter which card is plugged
On Mon, Feb 24, 2003 at 11:41:30PM +1100, Russell Shaw wrote:
Michael West wrote:
I am having trouble setting up a system for 3 nic cards with a monolithic
kernel ( 2.4.18 )
The three cards are identical and use the eepro100 driver.
For testing I have them set up on the same sub-net. All
On Mon, Feb 17, 2003 at 02:56:14PM +0100, Frank Murphy wrote:
What is wrong with the following setup for Grub? I always ended up with
problems booting from hda5, which is not a partition on my system. (hda1
is windows, hda2 is swap, hda3 is going to be Sarge, and hda4 is Woody.)
On Sun, Feb 16, 2003 at 01:36:10PM +0100, Frank Murphy wrote:
I wanted to install Sarge on an empty partition in my machine that I have
booting with GRUB. So I decided to start by installing Woody. I tried
following the Installation directions for booting from LILO, but modifying
them
On Thu, Feb 13, 2003 at 11:55:21AM +0330, Aryan Ameri wrote:
On Thursday 13 February 2003 04:52, Michael West wrote:
On Thu, Feb 13, 2003 at 01:55:30AM +0330, Aryan Ameri wrote:
Hi there:
I want to repartition my hard disk, but when I try running cfdisk (and
yes, I am root), I get
On Fri, Feb 14, 2003 at 08:00:34AM -0600, Steve Waterman wrote:
Looking for a good, stable all-in-one motherboard with a small form factor in
which all the components are supported. The board should have video, sound,
nic, modem, usb, etc. Hoping to build a small box with enough power to
On Thu, Feb 13, 2003 at 01:55:30AM +0330, Aryan Ameri wrote:
Hi there:
I want to repartition my hard disk, but when I try running cfdisk (and yes, I
am root), I get an error message saying:
Cannot create logFATAL ERROR: Bad logical partition 7: tended partitions
On Sat, Jan 11, 2003 at 10:00:41PM -0800, Alvin Oga wrote:
a print server should never go down ... if not being able to print
at any time is not acceptable, then
- put the printer on the gw or the mail server...
( a machine that presumably doesn't go down )
because if those
On Fri, Jan 10, 2003 at 10:45:51AM +, Karsten M. Self wrote:
on Tue, Jan 07, 2003 at 06:21:17PM -0800, Michael West ([EMAIL PROTECTED]) wrote:
I have been asked to help with getting a server for SAS. One of the
large expenses of this is the 200Gb+ RAID-5 disk on the EMC frame.
When
I have been using samba as a print server at home, but
I am often mucking around on my debian box, and sometimes this
results in my wife not being able to print.
To increase user satisfaction I am considering purchasing one of
these dedicated print server appliances
I have been asked to help with getting a server for SAS. One of
the large expenses of this is the 200Gb+ RAID-5 disk on the EMC frame.
When presented with $ the question came, can't I just get
something I can put under my desk and save $?
The SAS server will be
On Tue, Jan 07, 2003 at 09:17:59PM -0500, Tom Allison wrote:
I keep getting the following error when I run 'apt-get update'
Reading Package Lists... Error!
E: Dynamic MMap ran out of room
E: Error occured while processing kernel-headers-2.4.13-586-ext3
(NewPackage)
E: Problem with
Clarification:
I should add that I am not running bind. Basically, I am trying to
get squid to resolve an name from /etc/hosts.
On Fri, Jan 03, 2003 at 08:12:53PM -0800, Michael West wrote:
I cannot get squid to point to the internal ip of my webserver, it
resolves
I cannot get squid to point to the internal ip of my webserver, it
resolves to the public ip. It is ignoring the /etc/host.conf
entry:
order hosts,bind
I can ping the web server and it resolves correctly to the Class C
address.
I have gone through the large
I just changed one debian box from exim to ssmtp. When I send mail
from mutt with:
set use_from
I get the error:
ssmpt: no local part
I use a number of from addresses.
How can I choose which from address to use with ssmtp?
I tried
On Tue, Oct 29, 2002 at 02:53:32PM +, Steve Haslam wrote:
On Mon, Oct 28, 2002 at 11:21:00AM -0800, Michael West wrote:
How would I configure exim to reject most of a domain?
I have read the exim spec on host_reject, sender_reject,
host_reject_recipients etc, but am
On Mon, Oct 28, 2002 at 08:11:35PM -0800, Paul Johnson wrote:
On Mon, Oct 28, 2002 at 11:21:00AM -0800, Michael West wrote:
sender_reject ! [EMAIL PROTECTED] : aol.com
You want an MDA like procmail to do this after it reaches the MTA but
before the MUA.
I do not want to filter, I
On Tue, Oct 29, 2002 at 11:11:55AM -0500, Gregory Seidman wrote:
Is there a policy reason why there is no xv package, or is it just that no
one has bothered to package it?
--Greg
I prefer xzgv
from http://xzgv.browser.org/ :
xzgv differs from other picture viewers for X in that it uses
How would I configure exim to reject most of a domain?
I have read the exim spec on host_reject, sender_reject,
host_reject_recipients etc, but am not sure.
If I want to reject all mail from aol except for mail from one
account I think it might be:
sender_reject !
On Mon, Oct 28, 2002 at 07:44:52PM +, Alan Chandler wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 28 October 2002 7:21 pm, Michael West wrote:
How would I configure exim to reject most of a domain?
I have read the exim spec on host_reject, sender_reject
On Sat, Oct 26, 2002 at 03:44:13PM +1000, Tim Barker wrote:
Cannot find any reference to Port 192 in anything, httpd.conf, services
According to http://www.iana.org/assignments/port-numbers
port 192 is OSU Network Monitoring System
Are you sure this is an apache error?
I thought this didn't work anymore since microsoft pulled their
fonts.
I get a 404 when trying to retrieve the fonts:
---
apt-get install msttcorefonts
Reading Package Lists... Done
Building Dependency Tree... Done
The following extra packages will be installed:
On Mon, Oct 21, 2002 at 07:49:25PM +0200, Patrik Modesto wrote:
Hi,
First: I'm using Debian testing, daily updated as my home PC, exim is
setup to send outgoing mail directly to MX record.
Second: Now I need to setup exim to send all mail for some domain
through my ISP's smtp server.
So
Maybe I am not quite clear on the modules and patches thing.
I want to go ahead and produce kernel-image and kernel-headers with
a selection of the installed kernel-patch and *-modules packages.
Say I have kernel-patch-freeswan, kernel-patch-2.4-grsecurity,
kernel-patch-vlan, and
I imagine that you can set up an additional X display. I have not done
this, nor have I ever used a laptop.
Here are two non-debian links to get you started.
http://www.realtimesoft.com/multimon/linux/mandrake7/
http://www.linuxjournal.com/article.php?sid=5958
Hope this helps!
~Michael
Maybe you need libncurses5-dev :)
I don't know. Have you tried running ldconfig?
Good luck.
~Michael
On Fri, Oct 11, 2002 at 09:36:49AM -0500, Jason Wojciechowski wrote:
Cristi Banciu wrote:
| library. I have libncurses5-dev and all of its friends
All your subscriptions are belong to us.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
I copied my root file system onto a seperate partition. When I try to
boot into new partition as / I cannot login.
I get the error:
cannot cd /home/user
When I boot normally and chroot into the new partition and run login I
get:
cannot determine tty name
I copied devices ( and everything
I have just reconfigured exim to run with the security = unprivileged
option as described here:
http://www.exim.org/exim-html-3.30/doc/html/spec_55.html#SEC922
This is working fine, with exim owning the mailboxes.
None of my local_parts have system accounts.
Now I find that the pop3 daemon I
I is possible to compile just a single kernel module and copy it to
/lib/modules by hand and have it work?
Sometimes with new hardware I end up trial and error compiling to
see what will work. Just doing a `make modules modules_install`
works, but it would be nice to
I would like to change which controllers my disks are on, but when I do my
system no longer boots.
I have three ide drives on hde, hdi, and hdk. My main system is
completely on hdk. I boot into hdk. If I move the other two drives I
can no longer boot into hdk.
Depending on where I
On Sat, Apr 06, 2002 at 08:26:45PM -0800, web wrote:
I would like to change which controllers my disks are on, but when I do my
system no longer boots.
I have three ide drives on hde, hdi, and hdk. My main system is
completely on hdk. I boot into hdk. If I move the other two drives
I cannot get my iptables firewall to log
syslog.conf: kern.* -/var/log/kern.log
lsmod shows ipt_LOG moduled loaded
I created this test firewall in an attempt to log something
iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
LOGall --
53 matches
Mail list logo