Hi all,
It's been awhile since I last wrote to the list. Anyway, let's get down
to it...
I work at a securities firm (securities as in stock market). Most, if
not all, of our backoffice systems run on Linux (some M$, Solaris and
HP-UX). The majority of the Linux installs are RH 7.x whilst the
Hi All,
I am trying to implement account lockout in our production environment
using pam_tally.so. Has anyone had any success in implementing this? I
tried it and it does not seem to work. Here is the scenario:-
Users login to our production boxes from their Windows machines using
ssh (via
Try these:-
# dpkg-reconfigure xserver-xfree86
Answer as appropriate and do select a color depth that is a notch lower
that what is generally support by your dispaly adapter (e.g. use 16 when
you can actually use 24).
Ensure you have xbase-clients, xfonts-base and xterm debs installed in
Try using:-
# dpkg-reconfigure xserver-xfree86
...and point the device to /dev/gpmdata if you intend to continue using
gpm
Else (which is what I prefer as I do not rquire a mouse in
console-mode), do :-
# apt-get remove --purge gpm
..and then set the device to point to the relevant raw
Hi people,
I have a Compaq box with the above audio controller... I have recompiled
my kernel with sound modules enabled...but I can't get the sound to
work.
I next compiled Alsa 0.9 beta12 and the module insertion was ok...not
errors were noted...but when I fire up xmms and play some mp3...it
Another one of those release many and release quick again
Uuughh...
I remember someone once said regarding the impending release of 2.4.0
and why it was taking so long...that Linus just has much higher
standards...oh oh...this is definitely not in the correct direction in
support of the
The IIS Directory Transversal Vulnerability is in regards to an improperly
implemented IIS engine, which improperly interprets unicodes (e.g. %c0%9v) and
allows the web client to transverse above the webserver's document root
(usually set to c:/inetpub/wwwroot). If you review your logs in
I have been running snort on Potato/Woody machines and have also some
across similar problems. My solution:-
Removed the 5snort script and attached additional lines to logrotate to
re-start snort once the logs have been rotated. I also made a script
which will monitor the snort/swatch/qpage
You'd have to make use of frame buffers to generate the GUI for
installation purposesI'm not too sure if the stock kernel has frame
buffer compiled in..if not, then you'd make to make a new one to support
frame buffer...
HTH
On 23 Jul 2001 17:20:17 +0200, LAMIRAULT Nicolas wrote:
Ondolan
Hi people,
It has been sometime since I last wrote to the list. I recently upgraded
by box (the previous hardware all but blew up on me due to a faulty
power supply - CPU, MB, AGP, HD and all...) to an Althlon Thunderbird
1Ghz/Epox 8KTA3/Maxtor 20Gb ATA 100, etc. Having reinstalled Potato R3
and
Anthony Fox wrote:
Exactly. Thank you for your help. It is working now.
BTW, I noticed and recall reading somewhere that XFree86 v4 does not make use of
port 6000 anymore...as such, the export DISPLAY=target_host:0.0 does not work
anymore! Someone correct mew if I am inaccurate
Boot with your hardisk attached to the ide first then recompile the
kernel to support the promise ultra ata100/raid architecturethen
halt the box and switch you hardisk over to the promise ultra
ata100/raid controller...HTHYMMV though
Luquet Pierre-Sylvain wrote:
hello ,I'm trying
On Fri, Jan 12, 2001 at 10:04:47PM +0530, Raghavendra Bhat wrote:
James W. Lindenschmidt wrote:
--snip--
get my AWE64 working under ALSA. Can anyone point
me in the right direction to accomplish this?
--snip--
I got my AWE64 working under OSS by using the following irq/dma/io
On Thu, Jan 11, 2001 at 04:42:02PM -0500, David B. Harris wrote:
To quote Pollywog [EMAIL PROTECTED],
# I wonder why this is even an option; is there a reason anyone would
# install Linux without ext2 support?
# I have always wondered why the option was given.
ReiserFS/ext3: Some people run
On Fri, Dec 08, 2000 at 11:12:08AM +0800, Patrick Cheong Shu Yang wrote:
Hi people,
I have just installed Linux onto a HP NetServer E60 which uses the Adaptec
AIC7XXX. I am attempting to restore users data into /export/home from a
tape but have been unable to. I have used the mt command
On Fri, Dec 08, 2000 at 01:06:36PM -0500, Giulio Morgan wrote:
.how do I make the
connection through an ssh tunnel (I can make a terminal ssh connection -
via putty - I just don't know how to use ssh to connect to the vnc
server).
having read through the thread on VNC, I am assuming
Hi people,
I have just installed Linux onto a HP NetServer E60 which uses the Adaptec
AIC7XXX. I am attempting to restore users data into /export/home from a
tape but have been unable to. I have used the mt command to determine
the status of the drive (/dev/st0, /dev/rst0 and nrst0) but to no
I have been using Mutt and recently I added another drive to my Debian box and
copied /usr over (except for src) to the new hardisk. The now emptied /usr was
remounted as /usr/src. Now when I run mutt, my mailbox is always in read-only
mode. I need to delete my old mail and I am presently am
Mutt opens my mailbox in read-only mode. How can I change this to read-write as
I have RTFM and the man pages and I can only find how to invoke read-only using
the -R option when firing up Mutt. Would appreciate if someone could help me.
Thx.
Patrick
On Sun, Nov 26, 2000 at 08:17:42PM -0800, kmself@ix.netcom.com wrote:
You may have a bad drive. Or you could have problems with DMA, though I
don't particularly understand it.
Hey people...I'm back to the list. Just settling in my new job for a B2B and
getting to work with OSes ranging from
On Sun, Nov 26, 2000 at 10:01:51PM -0600, John Hasler wrote:
Are you running pon as root? If not, did you add yourself as a ppp user
when you ran pppconfig? If not, run pppconfig, go to 'Advanced', go to
'Add-User', and do so. If that isn't the problem post the output of plog
and copies of
21 matches
Mail list logo
