> Hi,
>
> I have kernel 3.13 and e2fsprog 1.42.9 (as part of mybuntu 14.04.5 LTS).
> With this, is it possible to resize2fs my ext4 RAID6 /dev/md0 to 24TB (ie
> >16TB)? If so, please help me get there. If not, please recommend the
> upgrades needed to the setup before this can be done. So, far,
On Sat, 2011-02-05 at 19:10 -0600, R. Ramesh wrote:
[...]
So what does vmstat -d tell me? Is the number of IO under total column
supposed to be the number of IOs
issued to the controller with each IO being contiguous N sectors?
man vmstat says 'total' is Total writes completed
Thanks for every ones help. I resolved all issues with errors from my
firewall. Here is a summary
1) My DSL modem/router periodically pings my machine. If I accept then
it queries more about www server, samba server etc. I do not like these
requests as I do not know what the modem does with
Hi:
My syslog and console window is repeatedly printing the follwing
message from my firewall setup. I cannot figure out which program or
service is printing this message. My first preference is to modify the
source behavior. The second choice is to stop printing the message.
I guess I could
connected to the DSL modem/router (which I
think must be 192.168.1.1)
Ramesh
Ramasubramanian Ramesh wrote:
Hi:
My syslog and console window is repeatedly printing the follwing
message from my firewall setup. I cannot figure out which program or
service is printing this message. My first
top posting - iihh ugly ;-p
well, it's the netfilter code from the kernel instructed by an
iptables rule, that spits out that message.
most likely this is a message informing you about a blocked packet.
the question is: who/what set this iptables rule to tell the kernel to
discard such
Hi,
I run lenny. I upgraded a month or so ago and switched from chroot
based iceweasel to 64bit iceape+icedove. Since then my printing became
sporadic from inside iceape. It would go thought motions but would not
print anything. Attempting to print to ps file produces just basic
header of
Thank you. But my trouble has nothing to do with printer as I cannot
print to a file either. It seems to be a iceweasel problem in printing
selected pages.
Ramesh
Andrew Malcolmson wrote:
On Fri, May 8, 2009 at 6:46 PM, Ramasubramanian Ramesh rram...@ti.com wrote:
Can you please tell me
Can you please tell me why this might be happening and what experiments
I can do to further investigate? I tried googling and got nowhere.
Ramesh
Ramasubramanian Ramesh wrote:
I run lenny amd64 and standard iceweasel package. I am having
difficulty in printing *some* secure (https) pages. I
I run lenny amd64 and standard iceweasel package. I am having difficulty
in printing *some* secure (https) pages. I am not sure what causes it,
but I think it does not print if there is only one page to print. Th
result is the same regardless of whether I print to the printer directly
or to a
On Mon, Dec 01, 2008 at 11:58:47 -0600, Ramasubramanian Ramesh wrote:
Hi,
I installed nvidia-glx yesterday (11/30/2008) on my lenny box and I
have a doubt if it is working. I look at /var/log/Xorg.0.log and I find
that it had text infroming nvidia is loaded and 3D acceleration is used
Hi,
I installed nvidia-glx yesterday (11/30/2008) on my lenny box and I
have a doubt if it is working. I look at /var/log/Xorg.0.log and I find
that it had text infroming nvidia is loaded and 3D acceleration is used.
However, when I start X, I do not get nvdia splash screen. So, I am
Kernel, by default, filters bridge traffic based on /proc/net/bridge/xxx
files. You need to set the contents of one or more files to 0.
I only had to set the contents of
/proc/sys/net/bridge/bridge-nf-call-iptables file to 0 (echo 0
/proc/sys/net/bridge/bridge-nf-call-iptables) and
everything
Hi,
I am trying to setup two guest windows XP on host linux amd64. Every
thing except inter-kvm network works. I have started the two kvm
machines with different macaddr to ensure there is no hwaddr conflict.
However, kvm assigns tap1 a hw address that is same as br0's hw
address. Here is
Hi,
I am planning to dist-upgrade to Lenny from Etch. Obviously, I want to
backup before upgrade and restore should the upgrade fail for what ever
reason. I have my root/usr/var on raid1 arrays. I see that backup is
very easy. I drop my netinst CD, boot in rescue mode, mount the mdx
arrays
All,
I run Etch+backports at my home gateway/file server. Lately, I find
that many packages are too old in Etch for my needs. I am thinking of
switching to Lenny. While Lenny is not as stable as Etch, I am not sure
how much difference there is, in terms of stability. I am not worried
about
vs lenny.
Regards
Ramesh
Mark Allums wrote:
Ramasubramanian Ramesh wrote:
Thanks. I am having this problem on my home network server/gateway.
So, I am trying to keep deviation from stable release to minimal.
Since I have 86xx, I cannot use nvidia-glx from stable distribution.
I will have to go
No screen savers or BOINC - nothing special. Usual server stuff stock
kernel/samba/nfs/amd etc. I use xset +dpms every night at 11pm and
remove it at 8am in the morning.
Ramesh
Mark Allums wrote:
Mark Allums wrote:
Ramasubramanian Ramesh wrote:
I am having issues with my new video card
risky or more stable in your opinion? Going nvidia way or
switching to lenny?
BTW, is this trouble known and am I raising it again? (I googled and
could not find anything correlated to my situation)
Ramesh
Mark Allums wrote:
Ramasubramanian Ramesh wrote:
I am having issues with my new video
I am having issues with my new video card MSI 8600GT. Xorg fires up
properly and everything is fine as long as I am within X. The moment
I try to switch one of the VCs (c-a-f1/2 etc) or exit X, all I get is
blank screen and no response from KB/mouse etc. Soon the monitor goes
into power save.
Is there a place where people have reported results/sagas/stories of
bringing up debian (any version) on specific hardware? I usually find
that I am doing most my searching for these types of reports before
buying mother boards and associated hardware. Now that I have brought up
debian an on
All,
I am trying to install etch amd64 daily build on to a geforce/nforce
6150/430 based board (Abit NF-M2 socket am2 board) but it hangs. It
hangs right after it prints info about detecting 1.44 floppy. I suspect
it is the network card that makes it hang. Has any one gotten network
working
I am interested in pariring 2x250G into raid mirror for linux
installation. However I do not want to use entire 250G into mirror.
While I believe
it is technically possible to have couple of partitions in raid 1 and
the rest as plain disk, I am looking for advise as to whether this is
ok?
Hi,
I searched the net looking for instruction to move an existing
installation to raid 1 setup, but could not find much. So I thought I
could ask here. I have a semi custom (debiab sarge based) installation.
Custom part being mainly kernel build and a little bit of non standard
networking.
Ramesh
Hi,
I searched the net looking for instruction to move an existing
installation to raid 1 setup, but could not find much. So I thought I
could ask here. I have a semi custom (debiab sarge based)
installation. Custom part being mainly kernel build and a little bit
of non standard
I have a Biostar T6100+amd64 setup and I tried netinst image for amd64
about a month ago and it could not get the nforce4 NIC to work.
It will identify load the forcedeth driver but nothing would happen
after that. I can see eth0 but it would not get address from dhcp
server. Even if I assign
I bought a new brother (HL5250DN) printer and wanted to hook it up using
its 10/100 network port. It needs a speical filter (if=xxx) to run. But
I can't get to use filter and remote print simultaneously. If put the
following in /etc/printcap
if=filter:\
rm=printer:\
rp=port
then it does not
Hi,
I recently upgraded from fvwm 2.5 from 2.4.x because I can no longer
find fvwm 2.4.x in stable.
Since the upgrade, I noticed a couple of issues that I hope you can help
to fix.
1) Each time I switch to a window on a different virtual area, it takes
an unually long time before the
I am running Sarge and I got everything from official Debian using
apt-get. The only thing that is not official is my .fvwm2rc which is
the same as the one I used with all previous versions of fvwm.
Regards
Ramesh
Roberto C. Sanchez wrote:
Ramasubramanian Ramesh wrote:
Hi,
I
Hi,
I have installed stable release of debian (using the netinst CD) on a
headless machine (no kb, mouse or monitor) . The machine also does not
have a floppy drive. I like to make a bood cd of the installed kernel so
that I can bypass the grub boot. Specifically the grub setup boots win
XP
All,
I am unable to change passwd as it fails with error message passwd:
Authentication token manipulation error. My /etc/pam.d/passwd contains
#
# The PAM configuration file for the Shadow `passwd' service
#
# This file is blank to allow fall-through to the 'other' service.
As
Ritesh Raj Sarraf wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 08 November 2004 09:55 am, Ramasubramanian Ramesh wrote:
No that is not the problem. The passwd itself fails and I cannot change
passwd for any user. In fact the above transcript points this out.
passwd
Hi,
I have not changed passwd or added user for quite some time. This has
been the case across several apt-get upgrades. Finally when I got to a
point I wanted to setup an account, I ran into the following difficulty.
lata [root] 54 adduser lata
Adding user lata...
Adding new group
Kam-Ming Siu wrote:
Try
adduser -G users lata
May be the group lata does not exist as you adding the new user. As I
know by default debian would not create individual group for new user.
Regards,
Ming
On Sun, Nov 07, 2004 at 07:07:00PM -0600, Ramasubramanian Ramesh wrote:
Hi,
I have
Hi,
I use testing as my standard distribution.
I got xserver-xfree86 4.3 from backports some time back (stable/pre/xfree86) and this
directory is
no longer available in backports. I suspect this leaves many dependencies hung in apt.
It does not
want to upgrade xterm xbase-clients etc and
All,
My search on package with the name transcode returned nothing. Thus I am assuming
that it is not
part of standard debian distros. Given that, any one compiled/installed/used the
transcode package
for creating/modifying/transcoding DVD content?
The source has a single step .deb creation
Hi,
I thought the kernel 2.6 onwards udf writing is standard. Does this mean we still
need udftools
(pktsetup) to actually write? I am asking because the default mount -t udf only mounts
the CD-R/RW
as read only. Rather cumbersome to go through a lot of steps before writing to CD.
Xcdroast
Any body know how to use udftools with 2.6 kernels? Do I need them or is
udf writing native to 2.6?
If I need udftools then where is this packet device that pktsetup is
looking for? I can seem to find the right menu item in
the make menuconfig. to build the kernel with this device.
Please
Hi,
Are apt-zip-list and apt-zip-inst meant to be used with zip/floppy drives only?
i.e., does the
medium need to be writable after a mount? How about using CD-R/RW with apt-zip? Has
anybody tried
this?
I am wondering if the following will work.
1) Use apt-zip-list to create the fetch
Hi,
I am having problems with CD mounting crashing 2.6.1. Each time it
craches it freezes and I need to hard reset.
Reboot always has severe disk errors on /var and some time in /. I
suspect improper set of driver combo to be the
problem. I like to try a couple of combination. But like to
Hi,
I always thought that the libxx.a libraries are needed to compile
programs. However it appears that it is
possible to compile programs without them (I suppose this means .so
version will be used). This I gather from the
response from the debian maintainer of libqt-dev (testing) - libqt-dev
All,
I believe I have a crash with alsa 1.0.1 on kernel 2.4.18.
Here is what happened.
I took alsa-driver-1.0.1.tar.bz2 from ALSA site and followed the
instruction to build/install under Aureal Generic document (readme
that comes when you search for aureal cards). I did not create
Found the problem
I need module-init-tools. modutils is no good for 2.6 kernels.
After apt-get install module-init-tools everything is fine.
Sorry for the clutter.
Regards
Ramesh
Ramasubramanian Ramesh wrote:
Hi,
Since this morning I am running 2.6.0-test9 (upgraded from
---
On Tue, Jan 13, 2004 at 10:36:09AM -0600, Ramasubramanian Ramesh wrote:
Thanks Collin. The code that is causing problem is in kernel-2.6.test9
asm/checksum.h.
Are you sure? I've got 2.6.1-rc1 here patched for powerpc, but the code
seems to be correct
All,
Often one is not sure of the choices and strength of packages/utilities and tend to
install
multiple utilies for the same purpose. For example I have about 3 or 4 cd players and
assortment of
mp3 palyers etc. Sooner or later you see that a lot of left over packages exists in
your system
Hi,
Since this morning I am running 2.6.0-test9 (upgraded from 2.4.18) to sort
things out. However I noticed that my first test itself has proved to be
impasse. I am nolonger able to load modules. I did
make bzdisk
make modules (no modules_install yet)
boot of the floppy
goto one of the
On Sun, Jan 11, 2004 at 05:25:45PM -0600, Ramasubramanian Ramesh wrote:
| Hi,
|
| I seem to have a problem doing make xconfig on the kernel-2.6.test9
| sources
| obtained from sarge. I suspect qt installation problem based on the ld
| output. But you can see from apt-get output
On Mon, Jan 12, 2004 at 09:46:56AM -0600, Ramasubramanian Ramesh wrote:
I changed gcc from 3.3.2 version to 2.95.4 and everything compiles
well. So, now I am wondering if this is a real gcc problem.
No; see my previous message. gcc 3.3.2 is stricter than 2.95.4, but
correctly so
My own followup:
I changed gcc from 3.3.2 version to 2.95.4 and everything compiles well. So, now I
am wondering if
this is a real gcc problem. Who is the gcc contact?
Ramesh
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Robert,
Your message does help. It reinforces my claim that the problem is gcc 3.3.2. I have
independantly
verified it by compiling using gcc 2.95.4 and yes it compiles as expected.
Regards
Ramesh
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
On Sun, 11 Jan 2004 17:25:45 -0600,
Ramasubramanian Ramesh [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]:
Hi,
I seem to have a problem doing make xconfig on the kernel-2.6.test9
..try 2.6.1 instead. The point with kernel-2.6.test9 was fix bugs
for kernel-2.6.test10 etc, so
Hi,
I seem to have a problem doing make xconfig on the kernel-2.6.test9
sources
obtained from sarge. I suspect qt installation problem based on the ld
output. But you can see from apt-get output (at the end) libqt-dev is
installed. But per
locate there are not libqt.a files. So I am a bit
Hi,
I got the source for 3COM gig ethernet card from Asus website and I am
having compile issue.
I suspect it is more of gcc/ccp issue rather than 3COM code. Here is what
I get on the very first file skge.c
lata [rramesh] 574 make
gcc -D__KERNEL__ -Wall -fno-strict-aliasing
Hi,
I tried vainly yesterday to make a muti-session CD-RW using xcdroast (in sarge).
There are menu
items to create such a CD but I am messing up. I looked for manuals and the html
version that gets
installed with xcdroast does not talk about how to make muti-session CDs. Also I do
not know
I am following up my own post as I have solved the problem myself.
1) You need to create session/image with write as a session enabled.
if you do so it will ask you if you want first or next session
- answer appropriately.
if you want later sessions then you need the cd to which
Matthias,
Thanks a lot for your reply. This is very comprehensive and to the point. Thank you again. You made my day.
I believe in time, the VIA solution will appear.Until then I will use SATA.
It is my understanding that a PATA IDE drive can be connected to SATA adapter with some cable
Paul,
Sorry for starting the second thread. But some how the first thread
seem to have given the wrong impression about why I was looking for RAID
controller. You can easily see from the replies that it went deep into
the worlds of RAID as opposed to leading to 5+drives on the same mobo.
To
Hi,
It is been a while since I did active stuff with linux. Thus my knowledge of what is
current in
the OS is outdated. I tried to get newer info with HOWTOs and other stuff. But still I
am not sure
at all. Here are my questions.
1) All most all of the newer motherboards come with SATA RAID.
or
JBOD)
Thanks and Regards
Ramesh
Henrique de Moraes Holschuh wrote:
On Tue, 30 Dec 2003, Ramasubramanian Ramesh wrote:
1) All most all of the newer motherboards come with SATA RAID. Is this usable
as is without any additional kernel drivers. I ask this because I read in
many
All,
I suppose I was not clear about the reason for using the on mobo RAID
chipsets. I simply want to have the ability to use more than 4 IDE
devices. I thought using the on board RAID controller was a easy
solutions. I suppose not.
All I want to do is to have the ability to run 4 IDE
Hi,
I am ready to upgrade my aging Gateway PII 300 to some thing more
modern. I plan to build my machine if I could and therefore looking for
a motherboard. I like to have the ability to use more than the usual 4
IDE devices. Is there a solution (mobo choice) other than buying a
standard one
Hi all:
I have the following problem which makes diald difficult to use. I have a
straight forward installation of debian with options (diald,ppp) file adjusted
to reflect my setup. Whenever I fire a network needy application (like telnet,
ftp) diald immediately wakes up and sets up the
62 matches
Mail list logo
