Don't ask my why, but the kabelfoon modem returns a no
carrier when a connection has been established. Just remove: ABORT
'NO CARRIER' from /etc/chatscripts/provider and it will work fine with
ppp.
Good luck,
Robert-Jan
At 22:54 20-6-01 +0200, you wrote:
I just
installed Debian version 2.0.38 and
it as time has been
short of late.
Ian
-Original Message-
From: Robert-Jan Kuijvenhoven [mailto:[EMAIL PROTECTED]
Sent: Friday, June 15, 2001 5:04 AM
To: debian-user@lists.debian.org
Subject: Sudden problem with bind
Hello,
I have got a debian potato firewall / mailserver running
problems.
I have connected my modem to a windoze box directly and it worked without
problems.
Can anybody tell what could be wrong here please? I have not changed a
thing on my debian box before it stopped working correctly.
TIA,
Robert-Jan Kuijvenhoven
At 13:49 29-12-00 -0500, you wrote:
Both 3Com and RedHat say that the
3c905b card does NOT work with
Linux.
3c905b does not work, they say? Take a
look at this:
/sbin/lspci -v
00:13.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone]
(rev 64)
Subsystem: 3Com Corporation:
Unknown
in the second mailbox as well.
What could be the problem here?
TIA,
Robert-Jan Kuijvenhoven
At 02:58 15-11-00 -0800, [EMAIL PROTECTED] wrote:
Well it is ok now. But it does teach people not to open attachments that
they do not know about espcially when using M$ softwares.
And it teaches people to use a good virus scanner with very recent
definition files. The virus scanner I use
At 12:04 15-11-00 +, you wrote:
Can
anyone help me to configure my box to send and receive email i don't know
where to start. messed around with exim but seem to have messed it up. I
really am starting from scratch. I can connect to the internet using pon
but that's all
thanks
jm
You needs
options from pppconfig.
Tia,
Robert-Jan Kuijvenhoven
I added pppd-options to /etc/diald/diald.options and it works!
Thanks,
Robert-Jan
Doug Young wrote:
I haven't had time to peruse postings about diald but maybe someone who
has used it could advise me what advantage diald has over wvdial, which I
found to be one of the best sorted out utilies ever . it works, its
simple,
and one doesn't have to read hundreds of
Hi,
I have a problem with diald. Diald connects and then disconnects with the
message:
peer refused to authenticate
It does work when I remove auth from the /etc/ppp/options file, but the man
pages say that I should not do this.
Can anyone tell me how to solve this problem?
TIA,
Robert-Jan
On Wed, May 19, 1999 at 06:13:41PM -0400, Allen B. Riddell wrote:
Are there any instructions on how to set up mail for a standard
home-desktop user? I.E.: I send my mail via smtp and recieve via pop3?
I got fetchmail working -- but it seems that all my messages are frozen
-- is some
Hi,
This is probably a very stupid question, but I haven't been able to find the
answer to it myself. In DOS it was very easy to check the amount of free disk
space, just type dir and the amount of free disk space is shown at the bottom
of the list. Now I have installed Debian on a 850 MB disk
Hi all,
Yesterday I rebuild my kernel for the first time in my life. Compiling the
kernel went very smooth when I rebooted my system it ran perfectly. I was very
happy.However, today I booted my system and trouble started.
The system gave a message that the filesystem had not been unmounted
On Fri, Apr 30, 1999 at 12:15:27PM -0500, Ian Keith Setford wrote:
I assume you are using pppconfig to set up the dialing. When it asks for
a name for the connection give it a name. After everything else is OK
type this at a root prompt: pon (where XXX is the name you gave the
Hello everybody,
I have installed slink and am trying to mount my cdrom. To mount the cdrom, I
use the following command:
mount -t iso9660 /dev/cdrom /mnt
This returns then following message:
mount: special device /dev/cdrom does not exist
What is wrong here? Is /dev/cdrom not the
Hi,
Since I installed X on my slink dist, xdm starts automaticly when I boot my
computer. Normally, this is no problem, but in some circumstances I would like
to quit X (ie to rebuild the kernel).
My question is:
How do I kill xdm, or prevent xdm from starting at boot-time (so I can start X
Thanks guys!
I found O'Reilly's book: Running Linux, written by Matt Welsh and Lar Kaufman a
very useful book. It is not a specail debian book. It is about Linux in
general. I am also quite new to Linux (my first contact with Linux was in
februari of this year) and I have learned a lot from the book.
I
On Wed, Apr 28, 1999 at 06:23:13PM -0400, add|ct|on wrote:
ok maybe i'm simple-minded but i cannot get fetchmail to fetch my mail
from my pop3 server. running fetchmail in -v mode, there were no errors
logging into the pop3 server, but once it gets to fetching the messages
it just sits
Hello,
If I setup netscape to use document-specified fonts, on some (parts of) pages,
the font wil be very ugly and almost impossible to read. It looks a bit like a
picture in netscape that has not finished loading yet.
Please help.
TIA,
Robert-Jan
Hi,
I have installed netscape 4.5, but when try to start it I get the following
error:
can't load library 'libXpm.so.4'
I have tried to find a library with such name, but I could not find it.
Can anybody help me out here, please?
Thanks
Robert-Jan
Thanks for your reply Robert. However, I did use the netscape4 installer.
Any ideas?
On Tue, Apr 27, 1999 at 06:01:50PM +0200, Horvath Robert wrote:
On Tue, 27 Apr 1999, Robert-Jan Kuijvenhoven wrote:
Hi,
I have installed netscape 4.5, but when try to start it I get the following
Thanks, I have got it working now.
On Fri, Apr 23, 1999 at 04:26:18PM -0500, Preston Landers wrote:
Robert-Jan Kuijvenhoven writes:
I can't get my mouse configured with gpm (slink). Normally when X
starts, the mouse doesn't work at all. Sometimes, when I press
Ctrl-Alt-Backspace a couple of times it starts working
? The mouse worked fine in hamm. This was without gpm, but
now I have slink and I read that some programs depend on gpm.
TIA,
Robert-Jan Kuijvenhoven
warning:
WARNING: local host name (kuijf) is not qualified: fix $j in config file
/etc/aliases: 6 aliases, longest 10 bytes, 86 bytes total
Sendmail is very too. All sendmail actions (starting up, sending mail) take
about 2 minutes each.
All help is appreciated,
Robert-Jan
host name (kuijf) is not qualified: fix $j in config file
/etc/aliases: 6 aliases, longest 10 bytes, 86 bytes total
Sendmail is very too. All sendmail actions (starting up, sending mail) take
about 2 minutes each.
All help is appreciated,
Robert-Jan Kuijvenhoven
--
Jens B
Hi,
I have changed from using fetchmail/elm to using fetchmail/mutt, but now can
not find the messages fetchmail receives.
When I start Mutt, it goes to the /var/spool/mail/username box. Mutt claims
this box is empty. When I change to ~/Mail/inbox, mutt also can not find any
messages. The
I have configured Exim. Only one thing does not work the way I want it to.
When I send a message, my local username is filled in in the From: line instead
of my username at my ISP ([EMAIL PROTECTED] instead of [EMAIL PROTECTED]).
Which setting do I have to change?
Thanks,
Robert-Jan
I have installed Exim but I am not able to configure it. I have read a
lot of documentation files on Exim, but since I don't know a lot about
mail and mailing, I don't realy understand most of it.
I just want to configure Exim to sent mail to my ISP's smtp server
(smtp.kabelfoon.nl) and to get
I have downloaded the KDE-Base using DSelect. However, dselect can't
configure KDE because the file qt1g is missing. DSelect can't find the
qt1g file in the package file.
Where can I get this file?
TIA,
Robert-Jan Kuijvenhoven
, without me having to start X and netscape every
time.
Thanx,
Robert-Jan Kuijvenhoven
David Webster wrote:
Hate to sound stupid but just what is TeTex? What is it used for?
You don't sound stupid! It a package for word processing. The only thing stupid
you can do is NOT to use TeX for your word processing. It is realy great! At
school I had a teacher in computer science, who
think this is not a
good security situation.
How can I change this?
TIA,
Robert-Jan Kuijvenhoven
,
Robert-Jan Kuijvenhoven
Jiri Baum wrote:
Ah, you have a cable modem... and if it's not really Hayes-compatible,
you'll probably need to adjust the chat script that pon is using (most
likely in /etc/chatscripts/ ).
IT WORKS! I noticed that the modem returns NO CARRIER quite often in minicom. I
removed abort on NO
NO CARRIER. Trying
ATZ again will usually work.
[to Robert-Jan Kuijvenhoven] So, once it fails with that, does trying again
help? Does it at least give a different error message?
No, it doesn't. However, I did find a way to make a connection. I installed
minicom from floppy, using dpkg -i. In minicom
When Robert-Jan Kuijvenhoven wrote, I replied:
Try the command
man minicom
to learn about the minicom program for manipulating your modem. I don't
have personal experience with it, (when I need to do these things, I
write
a perl script or something to gain access to the port/modem) but I've
Robert-Jan Kuijvenhoven:
The problem is that dselect fails to connect. Dselect shows the following
message:
Connecting to ftp.debian.org
Failed to connect
The ftp program normally doesn't dial the modem for you, because it doesn't
know whether you aren't just intending to use the ethernet
-Oorspronkelijk bericht-
Van:Helge Hafting [SMTP:[EMAIL PROTECTED]
Verzonden: dinsdag 9 februari 1999 19:55
Aan:debian-user@lists.debian.org
Onderwerp: Re: DSelect and ftp
You wrote:
Robert-Jan Kuijvenhoven:
ppp.log:
...
send (ATZ^M)
expect (OK)
^M
I have formatted a harddisk (to make it 100% microsoft-free) and installed
debian linux 2.0 from floppy disks. Then I tried to install packages using
dselect with ftp access. The problem is that dselect fails to connect. Dselect
shows the following message:
Connecting to ftp.debian.org
Failed
42 matches
Mail list logo