On 1/3/08, John Stumbles [EMAIL PROTECTED] wrote:
I'm trying to set up a laptop with both wired and wireless interfaces.
Apart from difficulties in getting the wireless to work I'm a bit
surprised by the way even the wired setup works. If I boot up the laptop
when the wired ethernet is
I just tried it in my Thinkpad Z61M (Mobile X1400) and it seems to be
working well in 2D.
Anthony
I've switch from vesa to the radonhd driver and it worked instantly on
my Z61p/FireGL5200.
Although I cannot see a difference.
Does anyone have success/experience with any driver and
+
On 12/3/07, Bruno Voigt [EMAIL PROTECTED] wrote:
the newer fglrx-driver 8.43.2-1 doesn't anymore detect my
Thinkpad Z61p FireGL5200 graphics.
The last working version was 8.40.4-2,
which unfortunately doesn't work with linux kernel 2.6.23.x ..
FireGL cards are still not supported with 8.43
On 12/3/07, Bruno Voigt [EMAIL PROTECTED] wrote:
robin putters wrote:
On 12/3/07, Bruno Voigt [EMAIL PROTECTED] wrote:
the newer fglrx-driver 8.43.2-1 doesn't anymore detect my
Thinkpad Z61p FireGL5200 graphics.
The last working version was 8.40.4-2,
which unfortunately doesn't work
On 9/26/07, Liam O'Toole [EMAIL PROTECTED] wrote:
On Tue, 25 Sep 2007 09:59:43 +0100
abdelkader belahcene [EMAIL PROTECTED] wrote:
Hi,
I want to use gnome-btdownload, to download a bittorent cd.
I works fine when there is no proxy.
But I can't use it when there is a proxy
help
On 9/26/07, Ron Johnson [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 09/25/07 18:44, Kevin Mark wrote:
On Tue, Sep 25, 2007 at 02:29:45AM -0700, Amit Uttamchandani
wrote:
Hey guys,
I recently installed etch on this old laptop and have no
problems with
On Etch 4.0 with Evolution 2.6.3 (with all updates applied).
Past 2-3 weeks my pop downloads using evolution have become very slow,
when they are going on they are consuming lots of resources. It's really
become a serious problem.
Can't figure out why this is happening? Any clues?
--
Did you
On 6/27/07, Marcelo Chiapparini [EMAIL PROTECTED] wrote:
I wander is does exists an standard bluetooth guide for etch...
I'm using the gnome-bluetooth packages from:
http://download.tuxfamily.org/osrdebian/dists/unstable/all/index.html
(sources.list: deb
On 6/19/07, Jarek [EMAIL PROTECTED] wrote:
Hi all!
Is it possible to configure networking in that way, that dhcp will not
be launched if there is no cable ?
I don't want to wait or Ctrl+C dhclient if there is no cable connected.
Use allow-hotplug in interfaces(5).
#cat
which packages replace fglrx-driver and fglrx-kernel-2.6.18-4-amd64 ?
None yet, but the latest xserver-xorg doesn't work with the fglrx
driver. Put your xserver-xorg package on hold before trying to
upgrade, and wait until AMD releases the new driver (or even better,
use the
BTW: Why is the latest fglrx driver only available for i386? AMD64 is
just at 8.31.xx
http://packages.debian.org/fglrx-driver
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On 5/7/07, Tim Wood [EMAIL PROTECTED] wrote:
I'm another who has problems with the latest upgrade in sid's xorg.
There is lots of information in the BTS:
http://bugs.debian.org/fglrx-driver
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
does anyone know if there are any plans to replace init with upstart or
something similar in Debian like Ubuntu has? The reason I'm asking is
that I've managed to get my wireless working
via /etc/network/interfaces rather than network-manager-gnome. The
only downside to this is that the dhcp
Try ´apt-get remove --purge nspluginwrapper´
Install that package again after the upgrade completes.
On 4/10/07, Luis Hidalgo [EMAIL PROTECTED] wrote:
Hi,
I think I have a serious problem. I tried to upgrade my packages using
apt-get upgrade but instead of being successful
the following
modprobe fb_nvidia_i2c
On 1/10/07, David Shultz [EMAIL PROTECTED] wrote:
On 1/10/07, Marty [EMAIL PROTECTED] wrote:
The graphics card obvious has to participate, but I don't see the driver
for the graphics card i2c. It may be there but I don't know what it's
called. I think in my case it's
First, make sure you have enough memory (if you assign 512mb to the VM, have
at least 512mb available for each instance of the VM you want to run + what
you need for your deb install + some spare memory).
Secondly, create the whole disk at once (do not use the ´incremental
option´, or however
On Sat, 2006-07-08 at 14:20 +0100, Stephen Fahey wrote:
I now cannot open Update manager or start Synaptic package Manager.
I think the issue is I'm not being asked for Administrator password,
access to Root Terminal does not get a response. Running :~$ apt-get
check in Terminal returns
On Sat, 2006-07-08 at 12:19 -0300, Marcelo Chiapparini wrote:
Hello,
I am running Azureus 2.2.0.2 in sarge. Each time Azureus starts, I
receive a warning regarding new updates availables. Is it safe to
upgrade Azureus accepting the suggested upgrade?
Update will work just fine.. But it
On Wed, 2006-06-21 at 21:35 +0200, Stefan Bellon wrote:
Ken Wahl wrote:
On Wed, Jun 21, 2006 at 06:29:11PM +0200, Stefan Bellon wrote:
I've done an apt-get update apt-get upgrade on my notebook last
night and today I noticed that I can no longer login to an X session
using gdm.
I
Although not on x64, I'm using the following combination, which gives me accelerated X on this card:
apt-get install -t unstable linux-image-2.6.14-2-686 # You will need at least kernel 2.6.14
apt-get install -t experimental xserver-xorg # For experimental packages of X.org 6.9
apt-get install -t
On Mon, 2004-04-12 at 03:20, Aaron Maxwell wrote:
What is the 'best' (correct, Debian) way to set things up so that the
connection is brought up automatically at boot time?
--
The easiest way is to install etherconf:
apt-get install etherconf
or when it's already installed, just do:
On Mon, 2004-04-12 at 09:49, Pim Bliek | PingWings.nl wrote:
Anyone any hints on how to get DRI working? I want to play TuxRacer :P.
My Videocard is a Gigabyte Radeon 9000 Pro.
I had basically the same problems. Everything seemed to be ok, but
fiddling with the order the kernel modules were
apt-get install etherconf
Or if it's already installed:
dpkg-reconfigure etherconf
Tell debconf that you want to use dhcp for address assignement.
-Original Message-
From: Ronin [mailto:[EMAIL PROTECTED]
Sent: Friday, March 19, 2004 1:20 PM
To: [EMAIL PROTECTED]
Subject: dhcp
Before
Change the line in XF86Config4 from /dev/input/mouse0 to /dev/input/mice
On Sat, 2004-03-13 at 18:36, Sascha Petranka wrote:
Hi,
I've ASUS L8400B notebook with synaptics touchpad and an external PS/2
mouse attached. With Kernel 2.4.x both devices funtioned correctly.
Now, with the kernel
Hmm. I chose Zinf to get rid of the gtk1 dependency. It's basically the
same.
But nowadays I'm waiting for powertweak-gtk to be ported to gtk2 (might do
it myself eventually).
- Original Message -
From: Tom Badran [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, February 26, 2004
: check also appdb.codeweavers.com.. You will find a lot of usefull
tips there (and also a lot of outdated ones).
--
Robin Putters [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
to the migration to Gnome2.2.
Try this: http://snapshot.debian.net/archive/
Or wait a couple of days.
--
Robin Putters [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
started doubting my hardware, but now I'm pretty sure that I'm
not the only one.
--
Robin Putters [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Mon, 2002-06-10 at 19:45, Balazs Javor wrote:
So my questions would be:
Is this true?
If yes, where could I learn about the reasons for this and similar issues?
Finally, in this particular case, would it be safe to upgrade binutils?
I'm having no problems running SID for over a year now
On Fri, 2002-06-07 at 16:46, Bruce wrote:
Given the fact that, unfortunately, there are still many sites that do not
work with mozilla, but do work with Netscape 4.77, is this a wise behaviour?
Did you install mozilla-psm for accessing thos sites? You need it if
they do https...
Robin
On Fri, 2002-06-07 at 18:09, Thorsten Manegold wrote:
I found the following message in the kern.log. What does it mean? If it
means that my HD is about to quit on me, how do I find out which
harddisk is affected?
Yes, one of your disks is dying.. Check the ide-smart package, it should
On Wed, 2002-06-05 at 21:08, Charlie Grosvenor wrote:
I have the package libc6 installed but don't have the file /usr/bin/ldd
How can I solve this problem?
apt-get install --reinstall libc6
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
On Tue, 2002-06-04 at 19:20, prover wrote:
I'M NOT MEMER OF YOUR MAILING LISTS. MY MAIL IS : [EMAIL PROTECTED]
([EMAIL PROTECTED] IS ONLY FORWARD FROM [EMAIL PROTECTED]).
WHY THIS MAILS COME TO ME?
EVERY DAY COME TO ME 200 MAILS FROM YOUR MAILING LISTS.
CAN YOU DO SOMETHING WITH IT?
On Fri, 2002-05-24 at 23:31, Quenten Griffith wrote:
Now if someone knows a better GUI MUA for Debian that supports spelling
checking/
GPG/LDAP/ and IMAP I am all ears to try it out.
Evolution?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
On Tue, 2002-05-21 at 07:41, Paul 'Baloo' Johnson wrote:
I gotta wonder what happened to being able to choose the priority and
display type for debconf in sid...I have a feeling I have the priority
cranked too high, but if I reinstall debconf, I don't get a menu asking
me what I want debconf
On Mon, 2002-05-20 at 18:45, Willy S wrote:
hi,
How come root can not run a graphical program under other user
session. Let say, I do 'su' and I try to launch gkrellm. Xterm will
produce this message:
Xlib: connection to :0.0 refused by server
Xlib: Client is not authorized to connect to
On Tue, 2002-05-14 at 06:42, [EMAIL PROTECTED] wrote:
Here's a related question: does anyone know if there is a grub graphic
available for Debian? Redhat's looks pretty cool, and Debian just has
the text menu.
The image goes in /boot/grub and is a .xpm.gz file.
Look for a thread about that
On Mon, 2002-05-13 at 05:35, Tom Cook wrote:
3) how do I delete the self-installed version and not hurt the debianized
one?
I wouldn't worry.
Use cruft (apt-get install cruft) to find out which files don't belong
on your system...
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
On Sun, 2002-04-14 at 11:38, Paul 'Baloo' Johnson wrote:
On Sun, 14 Apr 2002, David Wright wrote:
My woody system has the pre-compiled debian kernel-image 2.4.17-k7.
Is support for ext3 compiled into this kernel?
I know it is compiled into 2.4.18-k7. To see for your kernel, look for
On Sat, 2002-04-06 at 16:29, Vivek G. Bharathan wrote:
So I installed Debian in February and I've just discovered that my /usr
partition is much too small. I'd like to somehow set apt and dselect to
reload the packages I already have - is there any way to do this without
plugging through
On Fri, 2002-03-15 at 16:43, Michael Kines wrote:
I accidentally erased my /etc/issue .
Now, when I switch alt-ctrl f1, there is no
indication of what tty I am on. Where can
I get that back again? Thanks.
bash-2.05a$ dpkg -S /etc/issue
base-files: /etc/issue
So an apt-get install
On Wed, 2002-02-20 at 21:27, Charlie Grosvenor wrote:
I have noticed that a number of people who post to this list post blank
messages, with the actual message attached. Why is this?
Use a normal email reader, not dinky-toys look-out express, which
handles email correctly (and doesn't
42 matches
Mail list logo
