Art Edwards wrote:
I've been running debian @ home and @ work, for years, had no indication
of attacks. Over the last few days, my iptables firewall seemed simply
to stop. I checked my auth log file to find many, many attempts to break
in. My firewall was very simple. I have since added rules
I've about 20 of old netserver lpr machines that have the old megaraid
raid card. The kernal has dropped support for these cards. I'm tired of
dealing with it.
Can someone recomend a card that will work well with a stock debian that
I might find on ebay?
The drives are ultra3 18g
(only raid
Looking for a fairly current debian samba ldap pdc howto..
The ones I find for sarge and/or etch all say at the top. This document
is not yet finished.. :)
--
This message has been scanned for viruses and dangerous content by RCRnet, and
is believed to be clean.
--
To
Looking for some thoughts...
I've got a satellite connection from home.
I use a debian server for squid, files etc.
I'd like to use ssh to connect to the T1 at work and have my home squid
use this to connect to the internet. (Trying to bypass the Hughes proxy
we're all on)
So, my question is:
better?
Highest Regards,
Rodney Richison
RCR Computing
PO Box 566 - 118 N. Broadway
Cleveland, OK 74020
Phone: 918-358-
Proud ChannelVar member!
www.ChannelVar.com
I may set postfix
to use my isp for outgoing?
Highest Regards,
Rodney Richison
RCR Computing
PO Box 566 - 118 N. Broadway
Cleveland, OK 74020
Phone: 918-358-
Proud ChannelVar member!
www.ChannelVar.com
suggestions.
I got a suggestion of Drupal from a gentleman on this list. It looks
MUCH more friendly with MUCH better documentation etc...
Highest Regards,
Rodney Richison
RCR Computing
PO Box 566 - 118 N. Broadway
Cleveland, OK 74020
Phone: 918-358-
suggestions.
Highest Regards,
Rodney Richison
RCR Computing
PO Box 566 - 118 N. Broadway
Cleveland, OK 74020
Phone: 918-358-
On Sat, Oct 14, 2006 at 11:26:27AM -0500, Rodney Richison wrote:
I need a site management tool to control group permissions, logons
etc.
I've installed and run postnuke, however, it seems to be a management
nightmare. Not friendly at all. Very confusing. Am looking for
alternatives
It may be I'll need to join a samba group, but I thought I may get a
quick answer.
Am attempting to do a test install of samba as a primary domain
controller. I can see the shares and navigate them.
However, when I attempt to join the domain, WinXP says username could
not be found.
I have a root
It may be I'll need to join a samba group, but I thought I may get a
quick answer.
Am attempting to do a test install of samba as a primary domain
controller. I can see the shares and navigate them.
However, when I attempt to join the domain, WinXP says username could
not be found.
I have a
Would like suggestions on setting up a preferably debian domain
controller. In particular, good tools, gui's, to manage it.
Or should I look at something differant like sme server?
--
Highest Regards,
Rodney Richison
RCR Computing
PO Box 566 - 118 N. Broadway
Cleveland, OK 74020
Phone
# client icmp ftp ssh smtp dns http https pop3 althttp rsync webmin
dhcpclient accept
client all accept
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
Looking for a internal hotswap tray for sata drives that is debian
friendly. Suggestions before I buy??
--
Highest Regards,
Rodney Richison
RCR Computing
PO Box 566 - 118 N. Broadway
Cleveland, OK 74020
Phone: 918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
in with a space before it.
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Is there not a recipe program in the debian repositories. Trying to get
wife hooked. :)
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe
/Linux, kernel 2.6.8-2-686-smp (recovery mode)
root(hd0,0)
kernel /boot/vmlinuz-2.6.8-2-686-smp root=/dev/md0 ro single
initrd /boot/initrd.img-2.6.8-2-686-smp
savedefault
boot
/boot/grub/device.map
(hd0) /dev/sda
(hd1) /dev/sdb
--
Highest Regards,
Rodney
coding, plus it has dialog windows for developing CSS files and other various
items like tables or forms.
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
]; }
# Shorten the line to restart a service
function restart{ /etc/init.d/$@ restart; }
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble
a piece of software that exists on the NET that does what I'm
doing better and I should trying to re-invent the wheel? :-)
rsnapshot should do it.
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email
on those sites stupid enough
to require it.
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
. and the alias command
works under root and my user account both..
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
Joseph Smidt wrote:
It looks like k3b has been sitting in unstable never moving to
testing. Is k3b going to be in Etch or is Debian holding it back for
a reason?
I just did a new install on a machine a few minutes ago and took it up
to testing. The upgrade removed amerok and k3b.
is beyond me. You get caught in a loop. Cause's much grief from
those upgrading..
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble
upgrading as I have
lately. Testing and unstable both seem to have some problems..
Anyone do a fresh install the last week or two that's worked for them?
Hints?
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
?
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
..
http://www.virtualmin.com/support/documentation/thebookofwebmin/ch12.html#sqtutsettingup
---
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe
to
sync from offsite locations.
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Rodney Richison wrote:
I find many programs as I'm googling for a simple callendar program.
Would like advice on what you guys find usefull.
I seen thunderbird callendar.
kdepim
These are easy to install. Work with a group. What would you use to
connect in a multi-platform 10-user
wants to
mess with compiling kernels every time they do a upgrade...
As usual. Suggestings are welcome. Maybe I'm missing something...
-
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email
I've seen asked before and googling does not help. Here's how I just
switched over a server from ide to a compag dl380 with smart array 3200
scsi card.
Install base system on target machine. Install webmin
On running server, install webmin.
go to system/file-system backup
make a backup to the
I'd like to get some suggestions for some ultra320 controllers that are
very debian friendly for purchase from ebay.
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
will now be
/dev/sda rather than /dev/hda so I'm looking for thoughts on the easiest
way to handle this.
The new machine has debian sarge freshly installed already if this helps.
Maybe use tar and exclude the grub directory?
Thoughts?
--
Highest Regards,
Rodney Richison
RCR Computing
http
..
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
to migrate apps complete
with your customized configs to your new box (or to a fleet
of new boxes).
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
My system wants me to run e2fsck manually.
How to do this in debian? The machine boots and runs fine.
S, with grub, can I boot somehow not mounted and run e2fsck without
a rescue cd?
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
Bill Marcum wrote:
On Sat, Dec 24, 2005 at 05:08:09PM -0600, Rodney Richison wrote:
Rodney Richison wrote:
Can any tell me why this works manually
mount -t ext2 /dev/hdc1 /mnt/idedrive
But this in fstab does not work
/dev/hdc1 /mnt/idedrive ext2defaults 1 1
I don't think this came up in the thread, but does it show up in dmesg
at all? It should theoritcally show up a the same time as all the
other disks
Posting relevant portion of dmesg below...It seems it finds hdc ok.
But maybe not in time before it runs fsck maybe?
.
, when grub says your partition may be corrupt or invalid,
edit the grub entry to say hd0, not hd1
After install, edit /boot/grub/menu.lst to read hd0 permanantly
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
ext2defaults 1 2
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Rodney Richison wrote:
Can any tell me why this works manually
mount -t ext2 /dev/hdc1 /mnt/idedrive
But this in fstab does not work
/dev/hdc1 /mnt/idedrive ext2defaults 1 1
or this
/dev/hdc1 /mnt/idedrive ext2defaults 0 0
or this
/dev/hdc1
Is there a vnc repeater available on linux(debian) like the ultravnc
repeater?
For customer support...
And,,, this is probably a question in the ultravnc forum, but can you
connect to a repeater using linux xvncviewer?
--
Highest Regards,
Rodney Richison
RCR Computing
PO Box 566 - 118 N
Joseph H. Fry wrote:
On Thursday 17 November 2005 1:15 pm, Rodney Richison wrote:
Is there a vnc repeater available on linux(debian) like the ultravnc
repeater?
For customer support...
And,,, this is probably a question in the ultravnc forum, but can you
connect to a repeater using linux
What method would be good to control windows machines from my linux
machine. Windows remote desktop sucks. Though it's easy to setup with
tsclient on my debian box.
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
Jan Grant wrote:
On Wed, 26 Oct 2005, Rodney Richison wrote:
What method would be good to control windows machines from my linux machine.
Windows remote desktop sucks. Though it's easy to setup with tsclient on my
debian box.
You don't explain which features of windows remote
I would like to make a simple console menu for a script I'm writing.
While I see things like pdmenu, I'd like this menu to show up on a plain
vanila new debian base install with now gui. Do you guy's know of some
simple examples I might look at to accomplish this?
--
Highest Regards,
Rodney
What gui program might be good for scanning a network to take an
inventory of machines and ip address's etc on a network?
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
it
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
: Capability LSM initialized
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
metal. Though when it
works, it's the cat's meow..
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
to make this
script non-dependant of other text files.
export LS_OPTIONS='--color=auto'
eval `dircolors`
alias ls='ls $LS_OPTIONS -F'
alias ll='ls $LS_OPTIONS -l'
alias l='ls $LS_OPTIONS -lA'
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
Almut Behrens wrote:
On Sat, Sep 17, 2005 at 02:33:03PM -0500, Rodney Richison wrote:
Am trying to automate some stuff for future installs.
I'd like to echo multiple lines to the end of a file. Like this
echo '. /etc/bash_completion' ~/.bashrc
But I'd like to add multiple lines at one
/lib/modules?
Mondo sure helps on this sort of thing. :)
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
- not syncing: Attempted to kill init!
Do you think it may be because the megaraid I did with modprobe rather
than build add it to the kernel which I don't know how to do yet?
--
Highest Regards,
Rodney Richison
RCR Computing
PO Box 566 - 118 N. Broadway
Cleveland, OK 74020
Phone: 918-358-
be more friendly to debian?
IBM, dell? or what?
Or should I just resign myself to keep rolling my own :)
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
,
Rodney Richison
RCR Computing
PO Box 566 - 118 N. Broadway
Cleveland, OK 74020
Phone: 918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
--
Highest Regards,
Rodney Richison
RCR Computing
PO Box 566 - 118 N. Broadway
Cleveland, OK 74020
Phone: 918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
]
rsync error: error in rsync protocol data stream (code 12) at io.c(420)
umount: /mnt/usbdrive: device is busy
--
Highest Regards,
Rodney Richison
RCR Computing
PO Box 566 - 118 N. Broadway
Cleveland, OK 74020
Phone: 918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
= rodney
guest ok = yes
force user = rodney
hosts deny = 0.0.0.0/0
hosts allow = 127.0.0.1 192.168.1.0/24
public = yes
browsable = yes
--
Highest Regards,
Rodney Richison
RCR Computing
PO Box 566 - 118 N. Broadway
Cleveland, OK 74020
Phone: 918-358-
Ron Peterson wrote:
On Wed, Aug 10, 2005 at 12:42:53PM -0500, Rodney Richison wrote:
I'm having trouble getting samba to quit asking for a name and password
on an open share.
How may I do this without affecting the other shares that do have name
and password verification?
The below
I'm a bit confused, I want to be able to sync my laptop from anywhere in
the world to my desktop but want the newest file from whichever to
overwrite the other. Can rsync do this?
I see -auv switch should work. Is it a reliable way to accomplish this?
--
Highest Regards,
Rodney Richison
At boot, debian unstable hangs at ipv6 over ipv4 tunneling driver when
guarddog is enabled. Help! :)
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
they should be called, pre-tweaked debian distros.. :)
Suggestions?
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
-rom hooked to the ide ports.)
Ideas?
BTW, I suggested putting the drive on the regular ide port, but he'd
like to keep both cd's on separate ide ports... He's hard headed.
--
Highest Regards,
Rodney Richison
RCR Computing
http://www.rcrnet.net
118 N. Broadway
Cleveland, OK 74020
918-358-
Bran new machine. I'll try to describe the problem with the time.
The logs are not helpfull because I cannot determine what happens first,
the time going back to 1901 or 1938 (it differs)
Or Courier imap screaming the .Maildir doesn't exit (which it clearly
does) or it doesn't have permission.
Dave Ewart wrote:
Partimage certainly works very well. You can create a bootable CD which
(assuming your image fits on a CD) you can use to install your image.
If the image is larger, you can use it across the network. Run
partimage daemon on one box, then boot up your unconfigured box(es)
Is there a debian way to install this rather than cpan?
cpan
install HTML::Parser
Just curious
--
Highest Regards,
*Rodney Richison [EMAIL PROTECTED] mailto:[EMAIL PROTECTED]*
*RCR Computing www.rcrcomputing.com http://www.rcrcomputing.com/*
*PO Box 566 - 118 N. Broadway*
*Cleveland, OK 74020
I've got two machines with mepis which loads to kde. At the logout
prompt, I get the choice to Logout, reboot, or shutdown.
I see gnome has this also.
I've found kdm so irritating, I boot to a prompt now and the startx for
kde. Much less frustrating.
Got a clue how I might duplicate that
machine.
--
Rodney Richison
[EMAIL PROTECTED]
118 N. Broadway
PO Box 566
Cleveland, OK 74020
RCR Computing - RCRnet
http://www.rcrnet.net
tel: 918-358-
fax: 918-358-1112
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
for techs/consultants. (ChannelVar.com)
They are a VERY qualified bunch of guys. (Admittedly not linux users
though) :)
The preferred method is top posting.
The preferred format is to allow html.
--
Rodney Richison
[EMAIL PROTECTED]
118 N. Broadway
PO Box 566
I attempted a repair floppy last night. It didn't work out real well.
Ahhh, for a command like sys a::) Novel idea...
Anyway here's what I did for future google searches. Maybe it'll help
someone someday.
How to Repair Grub boot loader after debian ghost restore
I booted with mepis (Any
-install
Since I used the sarge netinst, I seem to have no rescue cd. :(
Would someone mind giving me a simply way, on this system, to get grub back?
BTW, in the future, if I'm not dual booting, do I need a boot loader?
--
Rodney Richison
[EMAIL PROTECTED]
118
73 matches
Mail list logo