I have installed lenny
it produce sound thru internal speaker
that is, the one resides in the case
not the one I plug to the back of the case
In Windows XP it produce sound thru external speaker
My motherboard is P4B-MX
which has Intel Integrated Audio
below is output of lsmod:
Module
--- On Wed, 3/16/11, Andrei Popescu andreimpope...@gmail.com wrote:
From: Andrei Popescu andreimpope...@gmail.com
Subject: Re: problem with sound card
Any special reason to install lenny? The intel audio
drivers have seen
some improvements until squeeze. Even if you need lenny,
try the
--- On Wed, 3/16/11, Hugo Vanwoerkom hvw59...@care2.com wrote:
From: Hugo Vanwoerkom hvw59...@care2.com
Subject: Re: problem with sound card
What is the output of 'aplay -l' ?
Hugo
below is output by 'aplay -l'
List of PLAYBACK Hardware Devices
card 0: pcsp [pcsp], device
Is there any free software for doing that?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
I use snd_ens1371 module.
DVD has sound when I play it.
But xawtv and tvtime has no sound.
Maybe I shall use some wrapper for alsa driver?
Which command I should enter?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
I have copy DVD to hard drive.
It's at /mnt/dos4/1415
I want to convert it to save space.
Do you know the command?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
PM
gparted?
2008/11/12 Serena Cantor [EMAIL PROTECTED]
Is there any free software for doing that?
--
To UNSUBSCRIBE, email to
with a subject of unsubscribe. Trouble?
Contact
[EMAIL PROTECTED]
--
Regards,
Umarzuki Mochlis
http://gameornot.net
: debian-user@lists.debian.org
Date: Tuesday, November 11, 2008, 7:33 PM
Serena Cantor wrote:
I have copy DVD to hard drive. It's at
/mnt/dos4/1415
I want to convert it to save space.
Do you know the command?
The mplayer/mencoder documentation has a detailed chapter
on ripping a dvd
, November 11, 2008, 7:24 PM
On 11/11/08 18:04, Serena Cantor wrote:
I have copy DVD to hard drive.
As an ISO file?
It's at /mnt/dos4/1415
I want to convert it to save space.
That's way too non-specific.
How compact?
Shrink image width/height?
What format do you want it stored
Your reply is not helpful.
--- On Tue, 11/11/08, Ron Johnson [EMAIL PROTECTED] wrote:
From: Ron Johnson [EMAIL PROTECTED]
Subject: Re: how to use mplayer to convert DVD to a file?
To: debian-user@lists.debian.org
Date: Tuesday, November 11, 2008, 10:06 PM
On 11/11/08 19:03, Serena Cantor
=629:vpass=2 -vf
scale=854:480,pullup -sid 0 -o
/output.avi
mplayer /output.avi
Paul Yurt founder mastermoz.com
Check out our site to make webmasters happy
www.mastermoz.com
-Original Message-
From: Serena Cantor [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 11
, remembering that we are not paid to answer your
questions, read
this and come back when you ask smart questions.
http://www.catb.org/~esr/faqs/smart-questions.html
On 11/11/08 21:38, Serena Cantor wrote:
Your reply is not helpful.
--- On Tue, 11/11/08, Ron Johnson
[EMAIL PROTECTED
, 1:57 AM
On Tue, 11 Nov 2008 21:45:17 -0800 (PST)
Serena Cantor [EMAIL PROTECTED] wrote:
I suggest your reading others' replies to my
question. Their replies
are far more helpful.
You were specifying what size the output file should be,
but you didn't
specify the size of the input file
@lists.debian.org
Date: Wednesday, November 5, 2008, 5:25 AM
Serena Cantor wrote:
It works now though it has many programs! Thanks!!!
After running 2 sudo commands given by you, your
mencoder command can
record. I don't copy sudo output, because 1st sudo
merely says insmod
snd-mixer-oss.ko and snd
/08, Emanoil Kotsev [EMAIL PROTECTED] wrote:
From: Emanoil Kotsev [EMAIL PROTECTED]
Subject: Re: how to use mencoder to record TV program
To: debian-user@lists.debian.org
Date: Tuesday, November 4, 2008, 6:18 AM
Serena Cantor wrote:
The command you give does not work. I'm sure no
other TV
It works now though it has many programs! Thanks!!!
After running 2 sudo commands given by you, your mencoder command can record. I
don't copy sudo output, because 1st sudo merely says insmod snd-mixer-oss.ko
and snd-pcm-oss.ko and 2nd sudo has no output at all, though I have /dev/dsp
and
.
--- On Mon, 11/3/08, Emanoil Kotsev [EMAIL PROTECTED] wrote:
From: Emanoil Kotsev [EMAIL PROTECTED]
Subject: Re: how to use mencoder to record TV program
To: debian-user@lists.debian.org
Date: Monday, November 3, 2008, 6:34 AM
Serena Cantor wrote:
I have etch and install mplayer from
I have etch and install mplayer from debian-multimedia.
I can watch TV with command below:
mplayer -tv driver=v4l:width=640:height=480:outfmt=i420 -vo xv tv://
Now I want to record TV program, which command can I use?
I wish the output is one to two megabytes per minute. And the output should be
The command you gives does not work.
It seems to me that you miss -tv, so I add it, mencoder says sth. wrong with
audio device.
I think I can omit chanlist and channel specification in mencoder command,
because I can use the command below to watch TV:
mplayer -tv
3, 2008, 9:40 PM
Serena Cantor wrote:
mencoder
driver=v4l:width=640:height=480:outfmt=i420:audiorate=44100:amode=1:audioid=1:adevice=/dev/dsp1:norm=PAL:normid=0:chanlist=europe-west
tv://SOME_CHANNEL -o out.avi
hi,
I missed the -tv indeed
What about the mencoder commands
I have ISA SB16 sound card and etch.
I can use alsaconf to setup the card.
My question is how to save configuration so I needn't run alsaconf each time I
boot.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
I enter the command alsactl store and reboot, it doesn't work!
--- On Sat, 10/25/08, A. Ben Hmeda [EMAIL PROTECTED] wrote:
From: A. Ben Hmeda [EMAIL PROTECTED]
Subject: Re: how to save alsa configuration
To: debian-user@lists.debian.org
Date: Saturday, October 25, 2008, 12:29 PM
Serena
October 2008 21:53, Serena Cantor
wrote:
I enter the command alsactl store and
reboot, it doesn't work!
Hi Serena. I have an SB16 ISA card on the machine
I'm posting from (FC2),
but it's only set up for one of the distros on the
machine as a second
soundcard on the Fedora Core 3
@lists.debian.org
Date: Thursday, October 23, 2008, 10:24 PM
Woman's prerogative? :)
Google says that avidemux File-append
works.
On 10/23/08 21:17, Serena Cantor wrote:
Now I change mind, real media format does not save
disk space, compared with .flv.
So my question change to : how to combine
to a real media file?
To: [EMAIL PROTECTED]
Cc: debian-user@lists.debian.org
Date: Friday, October 24, 2008, 9:38 PM
Hi Serena,
On Fri, Oct 24, 2008 at 3:05 AM, Serena Cantor
[EMAIL PROTECTED] wrote:
I have etch and installed mplayer and mencoder from
debian-multimedia. I can play .flv file
I have etch and installed mplayer and mencoder from debian-multimedia. I can
play .flv file and real media file.
I have download a video clip from a video site like youtube. The clip has
several .flv files. I want to convert them to a single real media file. Which
command shall I use? Thanks!
]
Subject: Re: how to convert several .flv files to a real media file?
To: debian-user@lists.debian.org
Date: Thursday, October 23, 2008, 10:11 PM
On 10/23/08 20:05, Serena Cantor wrote:
I have etch and installed mplayer and mencoder from
debian-multimedia. I can play .flv file and real media
My sound card is ISA SB 16, which use sb module.
It's old, that's why it's hard to config.
alsa works in etch, but not in sarge.
alsaconf can't find SB 16 in sarge
Is it possible to copy alsa config file in etch to sarge?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
The flash is really good, I want to save it.
It's like youtube, it's at http://v.youku.com/v_show/id_XNDE4NDk2Mjg=.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
I have sarge, which use kernel 2.4
In kernel's config file, I find CONFIG_IDE=m
I try to config with commands below:
modprobe ide-cd ignore=hdb
modprobe ide-scsi
Then, cdrecord -scanbus, but can't find CD-Writer.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
Thanks anyway!
--- On Thu, 7/17/08, Serena Cantor [EMAIL PROTECTED] wrote:
From: Serena Cantor [EMAIL PROTECTED]
Subject: need help on configing CD-Writer in sarge
To: debian-user@lists.debian.org
Date: Thursday, July 17, 2008, 3:07 PM
I have sarge, which use kernel 2.4
In kernel's config
I have etch.
Now I add a Ethernet card
The card use e100 module in kernel 2.4/sarge
but e100 in etch does not seem to work.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
@lists.debian.org, [EMAIL PROTECTED]
Date: Wednesday, July 16, 2008, 2:58 PM
On Wednesday 16 July 2008 14:51, Serena Cantor wrote:
I have etch.
Now I add a Ethernet card
The card use e100 module in kernel 2.4/sarge
but e100 in etch does not seem to work.
Hi Serena. Is the e100 module loaded? Post
, Serena Cantor wrote:
I use etch and SB16
I add noisapnp to kernel options
I config sound with 3 commands:
modprobe sound
modprobe uart401
modprobe sb io=0x220 irq=5 dma=1 dma16=5
==
[AO_ALSA] alsa-lib:
confmisc.c
:30:51, Serena Cantor wrote:
--- On Sun, 7/13/08, Andrei Popescu
[EMAIL PROTECTED] wrote:
Seems to me like you are using oss drivers, but
mplayer
wants to play
using alsa. Try running alsaconfig without doing
those
hacks. Do you get
sound?
Thanks, but which package
I use etch and SB16
I add noisapnp to kernel options
I config sound with 3 commands:
modprobe sound
modprobe uart401
modprobe sb io=0x220 irq=5 dma=1 dma16=5
Now vlc can play DVD, and I can hear sound.
I install mplayer from debian-multimedia, but can't play mp3,
What should I do?
Below is
at 09:39:18PM -0700, Serena Cantor wrote:
I can use Chinese file names in sarge.
And I can use Chinese file names in Chinese Windows 2000
The problem is inter-operate
In sarge I can't use files with Chinese names in FAT partition.
--
To UNSUBSCRIBE, email
I can use Chinese file names in sarge.
And I can use Chinese file names in Chinese Windows 2000
The problem is inter-operate
In sarge I can't use files with Chinese names in FAT partition.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
I want to add command below to /etc/network/interfaces:
ifconfig eth1:0 192.168.1.100
Below is my /etc/network/interfaces file:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
auto eth1
iface eth1 inet static
address 192.168.0.1
netmask 255.255.255.0
#
Thanks! I have no experience in video conversion. And video conversion
takes time and may lose sth. My debian has not installed mplayer, and
install real codec in mplayer is not that easy.
--- Simon Jolle [EMAIL PROTECTED] wrote:
2008/3/15, Serena Cantor [EMAIL PROTECTED]:
The film in real
Grandhi [EMAIL PROTECTED] wrote:
Serena Cantor wrote:
The film in real media file is in a foreign language, so I want to
add
translation to bottom of frame.
Which package can do that? Thanks!
Do you already have the subtitles in the language of your choice? In
that case, many players
The film in real media file is in a foreign language, so I want to add
translation to bottom of frame.
Which package can do that? Thanks!
Looking for last minute shopping deals?
Find them fast with
I have a TV card. I use a audio cable from TV audio out to sound card
line-in.
I often recording TV, so I want to find out sound card performance
during TV recording. Which program can test it?
I have 2 sound cards: one is ISA SB16 (which use sb module), the other
is PCI Cirrus Logic Crystal
I attach a CD-Writer(hdb) after installing etch on hda
According to /usr/share/doc/wodim/README.ATAPI.setup:
If you have just one CD writer in your computer, CD-writing should
work out of the box. There should be a symbolic link /dev/cdrw which
points to your actual CD-Writer's device (e. g.
and how to remove some module in initrd?
I use etch.
Be a better sports nut! Let your teams follow you
with Yahoo Mobile. Try it now.
http://mobile.yahoo.com/sports;_ylt=At9_qDKvtAbMuh1G1SQtBI7ntAcJ
You can go to:
http://www.real.com/linux/
and click download link there to see if there's problem.
--- Ron Johnson [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 11/30/07 22:55, Serena Cantor wrote:
I follow links at real.com,
No matter how hard I try, I
Learning to use new software takes time. Last time I used mencoder and
ffmpeg, they have video/audio synchronization problem, according their
manual.
Now I'm happy with real producer and player.
--- Kelly Clowers [EMAIL PROTECTED] wrote:
On Nov 30, 2007 8:55 PM, Serena Cantor [EMAIL
I follow links at real.com,
No matter how hard I try, I can't download it.
Be a better sports nut! Let your teams follow you
with Yahoo Mobile. Try it now.
Thanks!
--- David Fox [EMAIL PROTECTED] wrote:
On 11/30/07, Serena Cantor [EMAIL PROTECTED] wrote:
I follow links at real.com,
No matter how hard I try, I can't download it.
Why not get it from a Debian repository (debian-multimedia.org
I have TV card with a bt848 chip. I use etch and can watch TV using
xawtv.
Now I want to record TV program using producer. I have to exit xawtv
and there's no sound when recording using producer.
producer complains that capture buffer is empty.
Below are 2 lists of TV cards supported by video4linux in kernel 2.6.
Hope that helps!
saa7134-based TV card List:
0 - UNKNOWN/GENERIC
1 - Proteus Pro [philips reference design] [1131:2001,1131:2001]
2 - LifeView FlyVIDEO3000
Thanks for your advice!
I have tried and been disappointed by gentoo.
I have used File Runner before. It's not as intuitive as Explorer of
Windows.
To me, any interface that's different from Explorer will make me
uncomfortable.
--- Haines Brown [EMAIL PROTECTED] wrote:
I've been looking at
I have used Linux for 8 years.
I have not found any suitable file manager(FM).
I use twm. I don't use KDE or GNOME. so don't recommend any FM based on KDE or
GNOME
I still use command line. I will prefer GUI FM so my life can be a little
easier.
I use sarge and etch.
I use sarge, firefox went wrong today, font used by its menu and status bar are
so big that most
of screen space are occupied by status bar and menu. I can't find anyway to
config it.
So I reinstall sarge. And the problem persist!
by it.
--- Chris G [EMAIL PROTECTED] wrote:
On Sun, Nov 25, 2007 at 03:10:06AM -0800, Serena Cantor wrote:
I have used Linux for 8 years.
I have not found any suitable file manager(FM).
I use twm. I don't use KDE or GNOME. so don't recommend any FM based on KDE
or GNOME
I
I find the cause. It's ttf-arphic-gbsn00lp. It's a Chinese fonts package. After
removing and
purging it, the firefox is OK.
Could anyone explain it? I have used the fonts package for a long time. It has
been OK, but why
does it cause problem NOW?
--- Serena Cantor [EMAIL PROTECTED] wrote:
I
Thanks to all those who reply!
I have received so many replies I can't respond one by one.
I will try gentoo.
--- Joe Masters [EMAIL PROTECTED] wrote:
On 13:05 Sun 25 Nov , Ron Johnson wrote:
apt-cache is your friend.
Agreed, but sometimes you need personal recommendations to narrow
Thanks! I modify userChrome.css:
* {font-size:1pt !important
}
I can use firefox now, but its look and feel(fonts) is not as good as before.
--- Michael Marsh [EMAIL PROTECTED] wrote:
On Nov 25, 2007 2:37 PM, Serena Cantor [EMAIL PROTECTED] wrote:
I find the cause. It's ttf-arphic
I use etch's default kernel.
I have some problem with some module in initrd. I want to pass
parameter to them.
But first how to list all modules in initrd?
Get easy, one-click access to your favorites.
I have sarge and use xserver-xfree86
I start X from tty2, mouse functions correctly, but keyboard input missing in
X. After exit X
using mouse, I see keyboard input on tty2.
Get easy, one-click access
I have TV card that uses bt848 chip. It's LuckyStar card. I have been using it
for 3 years. But a
few days ago, it seems to have problems. After using xawtv in sarge or etch for
a few minutes, the
system halt. I mean it stop responding to keyboard input. In Windows 98, it
seems to halt more
I remove hotplug,
modprobe input hid and mousedev, all seems OK.
then I use cat /dev/input/mice to test mouse.
The usb mouse does not respond to movement.
--- Douglas A. Tutty [EMAIL PROTECTED] wrote:
On Sat, Nov 17, 2007 at 09:17:52PM -0800, Serena Cantor wrote:
I use sarge and its default
X does not work.
It seems I have to solve it on my own.
I'll sign off the list soon.
--- Douglas A. Tutty [EMAIL PROTECTED] wrote:
Don't top post.
On Sun, Nov 18, 2007 at 06:16:52AM -0800, Serena Cantor wrote:
--- Douglas A. Tutty [EMAIL PROTECTED] wrote:
On Sat, Nov 17, 2007 at 09:17
I use sarge and its default kernel 2.4 and USB mouse.
USB mouse works fine with hotplug package. But after I remove hotplug, USB
mouse refuse to work
even after I follow instruction on page below:
http://www.linux-usb.org/USB-guide/x194.html
Mostly I modprobe input, hid and mousedev.
Then I
You are right. I read kernel config in /boot, and find that ide is in module. I
will read manual
on initrd. Thanks! I'll sign off the list.
--- Douglas A. Tutty [EMAIL PROTECTED] wrote:
Note: don't top post. I've rearranged yours.
On Sat, Nov 10, 2007 at 06:31:41PM -0800, Serena Cantor
I install etch on an old system, but get boot messages below:
Nov 10 17:44:40 debian kernel: hda: IRQ probe failed (0xf7f8)
Nov 10 17:44:40 debian kernel: hda: IRQ probe failed (0xf7f8)
Nov 10 17:44:40 debian kernel: hda: no response (status = 0x0a), resetting drive
Nov 10 17:44:40 debian
want to disable ide probing during boot.
--- Douglas A. Tutty [EMAIL PROTECTED] wrote:
On Sat, Nov 10, 2007 at 05:38:37PM -0800, Serena Cantor wrote:
I install etch on an old system, but get boot messages below:
Nov 10 17:44:40 debian kernel: hda: IRQ probe failed (0xf7f8)
Nov 10 17
I follow your instruction, but it doesn't work!
--- dulev [EMAIL PROTECTED] wrote:
I often use UP key to get commands entered previously. The shell show
some commands again and again, just because I have used them several
times. Can the shell be more smart?
Put in ~/.bashrc
export
I find export HISTCONTROL=ignoredups in comment in .bashre and uncomment and
save and logout.
It does not work!
I try the following commands:
ls
pwd
cd
ls
whoami
Then I press UP key.
--- Andrei Popescu [EMAIL PROTECTED] wrote:
On Fri, Nov 09, 2007 at 01:58:34AM -0800, Serena Cantor wrote
The ls command show once, but pwd show twice.
It seems to me that HISTCONTROL=ignoredups sometime work, sometime does not
work.
It does not work as I have hoped.
--- dulev [EMAIL PROTECTED] wrote:
I find export HISTCONTROL=ignoredups in comment in .bashre and
uncomment and save and
Are you kidding?
--- Raj Kiran Grandhi [EMAIL PROTECTED] wrote:
Serena Cantor wrote:
The ls command show once, but pwd show twice.
It seems to me that HISTCONTROL=ignoredups sometime work, sometime does not
work.
It does not work as I have hoped.
Probably you need to use
Sorry, I use sarge, which has bash 2.
--- dulev [EMAIL PROTECTED] wrote:
The ls command show once, but pwd show twice.
It seems to me that HISTCONTROL=ignoredups sometime work, sometime
does not work.
It does not work as I have hoped.
Probably you need to use
My sarge is installed at /dev/sda2. There is some disk space just behind
/dev/sda2.
Can I let sarge use that space by resizing /dev/sda2?
Saving data and reformatting /dev/sda2 and reinstalling sarge takes too much
time.
My sarge uses ext2 file system.
Sorry, my memory fails.
After entering fdisk, I find free disk space is just before /dev/sda2, not
after it.
It seems that I can't resize it. Thanks anyway!
--- Raj Kiran Grandhi [EMAIL PROTECTED] wrote:
Serena Cantor wrote:
My sarge is installed at /dev/sda2. There is some disk space just
I often use UP key to get commands entered previously. The shell show some
commands again and
again, just because I have used them several times. Can the shell be more smart?
I use sarge.
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best
I just download a driver, compile and install it, it works on sarge.
But how can I trust it? Does it contain malicious code? I am unable read all
the source code.
Surely I'm very paranoid, or am I?
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail
I download the driver from sourceforge. The site promise nothing.
--- Ron Johnson [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 11/06/07 18:59, Serena Cantor wrote:
I just download a driver, compile and install it, it works on
sarge.
But how can I trust
Thanks! Because the driver has root permission, it can modify the system. So
output by ps and
other commands are not reliable.
Now I intend to take the risk, after thinking over pro and con.
--- Amit Uttamchandani [EMAIL PROTECTED] wrote:
On Tue, 6 Nov 2007 17:36:22 -0800 (PST)
Serena
I can watch TV using xawtv in etch, but I want to better config it, so I run
scantv, but scantv
complains that can't open /dev/vbi, no such file when beginning to scan TV.
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection
Solved on my own.
--- Serena Cantor [EMAIL PROTECTED] wrote:
I can watch TV using xawtv in etch, but I want to better config it, so I run
scantv, but scantv
complains that can't open /dev/vbi, no such file when beginning to scan TV.
__
Do
I can use xawtv in etch to watch TV, but am not happy with it, so I try
mplayer. So far it does
not work. Below is output:
(BTW: can you recommend other TV-watching packages in etch?)
$ mplayer driver=v4l tv://16 norm=PAL device=/dev/video0 output.txt
MPlayer 1.0rc1-4.1.2-DFSG-free (C)
You are right. After adding -tv it works. Thanks!
--- Mathias Brodala [EMAIL PROTECTED] wrote:
Hi.
Serena Cantor, 01.11.2007 00:03:
I can use xawtv in etch to watch TV, but am not happy with it, so I try
mplayer. So far it
does
not work. Below is output:
(BTW: can you recommend
!
--- David Brodbeck [EMAIL PROTECTED] wrote:
On Oct 31, 2007, at 4:03 PM, Serena Cantor wrote:
(BTW: can you recommend other TV-watching packages in etch?)
I've always liked tvtime. It does on-the-fly deinterlacing. Very
nice image quality, although at the expense of higher CPU usage
Thanks! I am busy putting mplayer and tvtime to work. I have just installed
vlc, its configuration
is not that easy. I will try later on. I have to sign off the list. Thanks
again!
--- Douglas A. Tutty [EMAIL PROTECTED] wrote:
On Wed, Oct 31, 2007 at 04:03:50PM -0700, Serena Cantor wrote:
I
On sarge I install jdk1.3 from sun, and get error below when running it:
/usr/local/jdk1.3.1_20/bin/i386/native_threads/java: error while loading shared
libraries:
libstdc++-libc6.1-1.so.2: cannot open shared object file: No such file or
directory
On sarge I have installed jdk1.2 and 1.4 from
I use sarge and crontab.
If I log out, what happen to the program I started ?
Don't let your dream ride pass you by. Make it a reality with Yahoo! Autos.
http://autos.yahoo.com/index.html
--
To
Thanks! I will try nohup later on.
PS: I received 3 copies of your mail.
--- Raj Kiran Grandhi [EMAIL PROTECTED] wrote:
Serena Cantor wrote:
I use sarge and crontab.
If I log out, what happen to the program I started ?
Can you be more clear? If you want to run a command every time
They say it's impossible. Why?
Catch up on fall's hot new shows on Yahoo! TV. Watch previews, get listings,
and more!
http://tv.yahoo.com/collections/3658
--
To UNSUBSCRIBE, email to [EMAIL
I have solved it on my own.
--- Serena Cantor [EMAIL PROTECTED] wrote:
They say it's impossible. Why?
Catch up on fall's hot new shows on Yahoo! TV. Watch previews, get listings,
and more!
http
I installed etch r0 from its ISO image.
Now I have etch r1 image, but can't install that way!
I use install.386/initrd.gz and install.386/vmlinuz,
and use lilo to load them.
Take the Internet to Go:
I have used modprobe usbmouse command, it seems OK
Then how should I change XF86Config-4? Namely Mouse Device and Mouse Protocol?
For PS mouse, they
are /dev/psaux and PS/2 protocol.
After that, Am i all set?
I have found out the cause on my own. USB mouse did not work because I have
removed hotplug and
discover packages. Now I install them again, and USB mouse get configed.
Thanks to all those reply!
--- KS [EMAIL PROTECTED] wrote:
Serena Cantor wrote:
I have used modprobe usbmouse command
I find title bar too wide, but can't change it, though I have read twm's manual.
Thanks in advance!
Catch up on fall's hot new shows on Yahoo! TV. Watch previews, get listings,
and more!
I have 2 PCs that are connected to wireless router, which is connected to a
cable modem. Now I
want one PC to be a Web server, so people all over the world can access it on
Internet. Since the
two PCs form a private network, how should I set up?
Or should I connect the Web server directly to
You are right! Thanks!
--- Raj Kiran Grandhi [EMAIL PROTECTED] wrote:
Serena Cantor wrote:
I have 2 PCs that are connected to wireless router, which is connected to
a cable modem. Now
I
want one PC to be a Web server, so people all over the world can access it
on Internet. Since
I have 2 PCs that are connected to wireless router, which is
connected to a cable modem.
The two PCs form a private network. I want to know the IP used by Internet user
to access one of PCs.
Thanks to all those who reply!
--- Steven Jan Springl [EMAIL PROTECTED] wrote:
On Friday 05 October 2007 21:56, Serena Cantor wrote:
I have 2 PCs that are connected to wireless router, which is
connected to a cable modem.
The two PCs form a private network. I want to know the IP used
I have asked many questions on the list, many are not debian specific, not even
Linux specific,
but I get a lot of help. Thanks
I have just registered a domain name. The registrar provides DNS service, but
asks me to go to
government web sites to apply for approval, because I am in China, and
From its manual, I see --responsefile option , but I can't use it.
I intend to run seeding in bittorrent, I want info on bt (such as number of
peers) to be stored in
a file. how to use the btdownloadheadless command?
I want to make my sarge box a seeding peer in bittornado
Which script should I edit to add bittornado command?
how make bittornado logging info on status of seeding?
Looking for a deal? Find great
1 - 100 of 230 matches
Mail list logo