Hello everyone. My soundcard is a soundblaster CT3600. I can't
get it to work.
I am getting the following error when I try to load modules touse it
as follows:
spoke:/proc# modprobe sb io=0x220 irq=10 dma=1 dma16=5 mpu_io=0x330
Soundblaster audio driver Copyright (C) by Hannu Savolainen
Help somebody? I'm using the most recent
stable version of woody.
/etc/dhcp3/dhclients-script
/etc/dhcp3/dhclient.conf
/etc/dhcp3/dhclient-enter-hooks.d/debug-enter
/etc/dhcp3/dhclient-exit-hooks.d/debug-exit
Are not being installed when I install
dhcp3-client. I have uninstalled this
I think I have read all the relevant docs regarding setting up my system
to auto load modules but I am still somewhat unsure.
I put the name of the module in /etc/modules if I want it fired up on
boot. This is not really what I want! I want the modules to start up
when they are required (like
Can anybody tell me what this port is for? When I nmap myself
(localhost) I keep seeing that this port is open. I don't know what
software is using this port? Any help would be appreciated.
MTY
Hi.
I am having a problem with the way the swat package is set up I think.
I use netscape to log into swap with the url:http://localhost:901/.
This works fine and I get the icons of the different features that I can
modify. The only problem is that when I select any of the help pages
nothing
Hello everyone. I need some help with this one.
I am running Debian 2.2 (Potato) on a AMD K6-2 system.
As of late I could not reboot my system because I goofed up with my lilo
setup etc. Regardless I was able to get my system back by using the
debian rescue disk. (I still have not learn to
Hi. I am running Debian 2.2.
I am trying to get my scsi card kernel module to load automatically when
I issue a mount command for that drive (or when other software like
dselect tries to mount that drive.)
My /etc/modules file reads as follows:
# /etc/modules: kernel modules to load at
Help.
I have a small network at home. I have two NIC cards in my Debian
machine, a single NIC in my windows machine and a cross over cable
linking the two machines. I can successfully telnet from my windows
machine to my Debian machine but i can't ftp from my windows machine to
my Debian
Hi folks. Can you help me out with this one?
I want to fire up my ipchains set up when my machine boots. I am
running IP Masq and I get my internet connection via DHCPCD. My second
ethernet card in my MASQ machine is set up using the
/etc/network/interfaces as below
# Used by ifup(8)
lilo? I have gone through the kernel compile configuration using make
config, and make xconfig and can not find the option mentioned.
Thanks,
MTY
On Tue, Nov 28, 2000 at 12:34:03PM -0700 or thereabouts, Yobb wrote:
Ah!
Further to my Tue, 28 Nov 2000 11:34:49 -0700 email regarding my CDROM
Hi. I'm trying to set up my SCSI card and CD-R and I need some advice.
Below is the output I get when I load my SCSI module.
I don't know what sr0-6 are but a get a feeling I only need 1 of them.
Once this module is loaded devices /dev/scd0 through /dev/scd6 accesses
the same single cd burner
Help. Am I missing something? I downloaded and tried to install the
following:
quake-lib_1.06-10.deb
quake-x11_0.1.1-1.deb
I got the following error:
# dpkg -i quake-x11_0.1.1-1.deb
(Reading database ... 46278 files and directories currently installed.)
Preparing to replace quake-x11 0.1.1-1
Help!
My CDROM was working yesterday? I don't know what is happening now. I
can access data disks on this devices just fine. When I put in a music
CD and trying to play it use something like cdplay or Xplaycd the cdrom
does not start playing music. cdplay is reporting an error as below
when
Ah!
Further to my Tue, 28 Nov 2000 11:34:49 -0700 email regarding my CDROM
problems the full error message that cdplay outputs is as follows:
hdc: packet command error: status=0x51 {DriveReady SeekComplete Error}
hdc: packet command error: error=0x54
ATAPI device hdc:
Error: Illegal request
Hi.
I have been look at the method of setting up color ls used by people and
I am convinced something is wrong with what is being recommended. What
seems to be the normal method is to put the following line in ones
.bashrc and .bash_profile:
eval 'dircolors -b [file]'
alias ls='ls
Hi,
As root I can compile a program using:
gcc -I /usr/include/X11 -L/usr/X11R6/lib demo.c -lX11
and get an executable a.out.
As a user when I type the same thing I get:
ld:cannot open -lX11: No such file of directory
Do I have to give this user special privledges or something???
How
I was wondering if anybody has seen a new version of ghostview that
allows you to do neat things like print every second page and other neat
things right in the interface. I think I saw this in a SUSE dist.. I
have hamm installed. Is this newer version packaged with slink??
Your responce
Well thought out. Bravo!
Well thought out. Bravo!
Can a person repartition an existing linux partition (assuming it is
not full) without losing the information on it? If so what software
should one use. I repartitioned my original DOS partition without
losing anything a long time ago but I am quite sure this was a DOS app.
Thanks,
MT
A rough step by step would help me out a whole bunch. Thanks
MT
You can get Debian to use your 128M of memory by passing a command to
the kernel with your boot loader. I use lilo and this is what I put in
my /etc/lilo.conf file
append=mem=80M
I put this right near the top of my lilo.conf file. You would have to
use something like this
append=mem=128M
What do I have to do to move my user directories to a different
partition/drive? I have looked around but I can not find what file (?)
that user info like home directory is stored.
Also I was wonder what the most dependable way to mount a drive on boot
was? Can you do this with in a
Hi all. I was wonder if anybody knows if it is possible to have
smail change the name of my username in the From: line of my mail when I
mail through my ISP.
Currently smail takes the name of my currently logged in
username (on my system) and I end up with something like
[EMAIL
When I boot I get the following errors all one after the other:
SIOCSIFADDR: No such device
SIOCSIFNETMASK: No such device
SIOCSIFBRDADDR: No such device
SIOCADDRTL: Network is unreachable
SIOCADDRT: Network is unreachable
It does not seem to be affecting the performance of my system
18:05:31 -0700
(PDT)
Date: Sat, 18 Jul 1998 18:05:30 -0700 (PDT)
From: George Bonser [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: Mark Yobb [EMAIL PROTECTED]
cc: debian-user@lists.debian.org
Subject: Re: Boot Errors
In-Reply-To: [EMAIL PROTECTED]
Message-ID:
[EMAIL PROTECTED]
X-No-Archive
(PDT)
Date: Sat, 18 Jul 1998 17:57:53 -0700 (PDT)
From: George Bonser [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: Mark Yobb [EMAIL PROTECTED]
cc: debian-user@lists.debian.org
Subject: Re: Sendmail setup.
In-Reply-To: [EMAIL PROTECTED]
Message-ID:
[EMAIL PROTECTED]
X-No-Archive: yes
MIME
Hi. I really need some help here. I have fetchmail working fine. It pops
my mail off my ISP's server just fine. I can't figure out how to make smail
send mail through my account on my ISP to the internet when I am logged in.
If I use netscapes mail it works fine. I have looked through man
I am having trouble with printing. I have magicfilter, lprng, and
cti-fthp (spelling?) installed. Text files print fine to my local printer
(HP LazerJet 5L) but when printing postscript files with ghostscript I just
get stepped lines of all these funny commands. I assume these commands
Hi folks!
I am running Debian 1.3.1 (bo) and I can't seem to find xman. I know it
comes with my CD because I had it installed at one time. What .deb package
is xman included in?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
Hi. I asked this question once before. Unfortunately I did not
phrase the question properly so the answer I got was helpful but not useful.
Here goes again.
I am running bo and I am have troubling compiling with gcc/g++. The
compiler does not find the prepocessor directive header files
Hay there! Is there any command that anybody know of that will
print to standard output all of the current environment variables?
When using korn shell I think it is `echo $ENV`? I want to see what
environment variables are currently intialized and there values. I would be
cool to see
What is the difference? Please be verbose!
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
I know how to use `dmesg` but I would really like to be able to get
the info that scrolls across my screen (on bootup) when /etc/init.d/boot is
executing. Is this message sent to a log file or something? How can I look
at this after booting?
Thanks Ah!
--
To UNSUBSCRIBE, email to
Hi everybody. I am quite new to this and I think that my previous
exposure to UNIX might to confusing me on this one?
I always knew xv or xview as a graphics viewing package with alot of
cool options. In my current bo 1.3.1 installation xview is included but
apparently I just
Hello. I am not sure what is wrong so I will just tell what happened.
I wrote a litte C++ with the following preprocessor directive at the top of
the file:
#include iostream
When I went to compile (gcc prog.C) I got the error message:
prog.C:1:iostream:No such file or directory.
I
Resent-Date: 10 Jun 1998 01:03:16 -
Resent-Cc: recipient list not shown: ;
X-Envelope-Sender: [EMAIL PROTECTED]
Date: Wed, 10 Jun 1998 03:03:58 +0200
From: Marcus Brinkmann [EMAIL PROTECTED]
To: Mark Yobb [EMAIL PROTECTED], debian-user@lists.debian.org
Subject: Re: Printer (port) Problems
Sender: [EMAIL PROTECTED]
Date: Mon, 08 Jun 1998 07:35:22 -0400
From: Bob Brown [EMAIL PROTECTED]
Organization: Very little, if any.
To: Mark Yobb [EMAIL PROTECTED]
Subject: Re: Printer (port) Problems
References: [EMAIL PROTECTED]
Mark Yobb wrote:
Hi, I would really appreciate some's
about xterm and rxvt
References: [EMAIL PROTECTED]
Resent-Message-ID: XriWiD.A.vR.-W_e1@murphy
Resent-From: debian-user@lists.debian.org
X-Mailing-List: debian-user@lists.debian.org archive/latest/7952
X-Loop: debian-user@lists.debian.org
Resent-Sender: [EMAIL PROTECTED]
Mark Yobb wrote:
How do I
Hi, I would really appreciate some's help. I have been trying to get
my linux system working for a long time. I have install Redhat 4.1, Redhat
5.0, Slackwear, etc. I think I have found the distribution I want in Debian
but now I have to get my system working right!
When I try to
How do I change the colours of these terminals.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
41 matches
Mail list logo