Re: Disk Drive Order Changes - Again

At 11:17 AM 4/6/2008, Hugo Vanwoerkom wrote: Butch Kemper wrote: Back in February, I asked a question about problems I was having with the hard disks sequence flip-flopping when I would boot: disk #1 would be hda and disk #2 would be hdc; or disk #1 would be hde and disk #2 would be hda. I

Disk Drive Order Changes - Again

specified. So, how do I make the kernel consistently detect and assign the disks in the correct order? Someone suggested the problem lies with UDEV and the parallel hardware detection process. Thanks for any suggestions. Butch -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject

Disk Drive Order Changes

with kernel 2.6.18-5-k7. I would welcome suggestions for what is causing the problem and how to correct it. Thanks. Butch -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: Ethernet card does not work after Mother Board Change

At 09:25 PM 2/8/2008, you wrote: Butch Kemper([EMAIL PROTECTED]) is reported to have said: I built a system using 4.0r2 net-install and have kernel 2.6.18-5-k7 installed. The motherboard failed and the replacement board has a different type ethernet card. In the kern.log file, I can see

Ethernet card does not work after Mother Board Change

some assistance on how to proceed to get the system to properly setup the ethernet card. Thanks. Butch

Re: Horde takes forever to load

settings that worked already fine. After that I have upgraded again to the latest versions in testing. I think the downgrade was not needed after all. Butch -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: Horde takes forever to load

Butch Coolidge wrote: Hello, I am not sure if this is a bug or a misconfiguration on my side. Two days ago I upgraded Horde3 to version 3.1.1-1. Since then all Horde pages take (almost) forever to load after login. Eventually pages get loaded, but only after several minutes. I have checked my

Horde takes forever to load

Hello, I am not sure if this is a bug or a misconfiguration on my side. Two days ago I upgraded Horde3 to version 3.1.1-1. Since then all Horde pages take (almost) forever to load after login. Eventually pages get loaded, but only after several minutes. I have checked my logs but I can´t

SendPage - Can't reset Modem

program so I know that the comm port and modem are working. I think that the Sendpage program is not doing something right when it is writing to the modem. Does anyone have any experiences with getting Sendpage to work that they can share with me? Thanks. Butch TSTAR Internet, Inc

Re: [offlist] Re: Defining Virtual Ethernet Interfaces

/S14network2 Works great now. Butch TSTAR Internet, Inc | Making the Network Work Marble Falls, TX| Serving Blanco, Burnet, and 830-693-6967| Llano Counties

Defining Virtual Ethernet Interfaces

not until I manually execute /etc/init.d/network when the interface is added. I either have the virtual specifications in the wrong place or there is a timing problem. Some guidance will be appreciated. Butch TSTAR Internet, Inc | Making the Network Work Marble Falls, TX

Re: Moving Users Passwords to Debian

of the shadow file and it worked. Thanks for all who replied. Butch At 10:31 AM 01/20/1999 +0100, you wrote: I need to move several thousand user entries from a Solaris 2.5.1 system to a Debian system. The problem that I have is to move the encrypted passwords. I have moved

Moving Users Passwords to Debian

Solaris and Debian, it didn't work. Is it possible to move the passwords by doing some form of bit shifting - converting between little indian and big indian? If so, can someone tell me the procedure? Any help or suggestions would be appreciated. Thanks. Butch

Diald and Windows NT/95

. 2. How to change the diald filter to stop the yo-yo actions. Thanks for your help. Butch Butch Kemper | Free sound advice available Kemper Associates Consulting Group | 95% sound and 5% advice 830-693-6967 | Refunds cheerfully provided

Re: How to enable pop3?

At 07:53 -0500 on 6/30/98, Miquel van Smoorenburg wrote: And a new qpopper has been in Incoming since Saturday. Patches were posted, but today a new series of attacks proved the patches worthless. Where can I get that version and the source that goes with it? Thanks. Butch Butch Kemper

Re: changing a users group

file because it is static so I use vi on it. Butch Butch Kemper | Free sound advice available Kemper Associates Consulting Group | 95% sound and 5% advice 830-693-6967 | Refunds cheerfully provided -- To UNSUBSCRIBE, email to [EMAIL PROTECTED

Re: Making Script Run as Super User

At 14:49 -0500 on 4/12/98, Jeff Noxon wrote: On Sun, Apr 12, 1998 at 02:41:34PM -0500, Butch Kemper wrote: I want a script to execute as the Super User. I have tried several things with the s attribute but have not been successful. Linux won't let you create suid shell scripts

Making Script Run as Super User

I want a script to execute as the Super User. I have tried several things with the s attribute but have not been successful. Any suggestions will be most appreciated. Thanks. Butch Kemper Butch Kemper | Free sound advice available Kemper Associates Consulting Group

Password Encryption

. Thanks. Butch Butch Kemper | Free sound advice available Kemper Associates Consulting Group | 95% sound and 5% advice 409-361-2324 | Refunds cheerfully provided -BEGIN PGP SIGNATURE- Version: PGPfreeware 5.5.3 for non-commercial use http

Re: What Driver for Compaq Ethernet Card

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 At 09:23 -0600 on 2/2/98, Nathan E Norman wrote: On Fri, 30 Jan 1998, Butch Kemper wrote: : : I have a Compaq Deskpro 2000 that has an ethernet card that Windows NT : identifies as Netelligent 10/100 TX PCI UTP Bus 0. The card has a big : chip

What Driver for Compaq Ethernet Card

to get the card recoginized by any of the drivers in the boot disks. I went to the web page, the Ethernet HOWTO, and some of the references but I was not successful in determining whicht driver to use. Does someone have a hint? Thanks Butch Butch Kemper | Free sound advice

Re:'make config'

, and there is no such directory. Where is my kernal? I even installed one from dselect and went back and checked and it still was not there. Use dselect to download the optional kernel source then you will find it. Butch Butch Kemper | Free sound advice available Kemper Associates Consulting

Re:PPP ??? #@$#

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I think you need to recompile the kernel with IP_FORWARDING enabled. Butch At 14:53 -0600 on 1/2/98, [EMAIL PROTECTED] wrote: I have encountered a strange problem with dialing out on PPP, and it is really bugging me now. I have got a slightly

Re:PPP Connection Works, Can't Surf...

. And to further confuse the subject, Debian is working normally on the network. It can DNS, ftp, http.. you name it, to anywhere, intra and Internet... I had this problem and solved it by compiling the kernel with the CONFIG_IP_FORWARD option turned on. Butch Butch Kemper

Re:PPP Connection Works, Can't Surf...

the IP_FORWARD option adds 5K to the kernel size. Butch Butch Kemper | Free sound advice available Kemper Associates Consulting Group | 95% sound and 5% advice 409-361-2324 | Refunds cheerfully provided -BEGIN PGP SIGNATURE- Version

Re:tar: Skipping to next header file

but as a text file. I would suggest trying the download again and explicitly specify the binary option. Butch Butch Butch Kemper | Free sound advice available Kemper Associates Consulting Group | 95% sound and 5% advice 409-361-2324 | Refunds cheerfully

Disk partioning error any idea what this means?

hi, does anyone out there on this list know what this is telling me? allan Drive C: has 1 Error 4,096 Bytes Per Clusters 2,504 (9Mb) Available Clusters 0 (0Mb) Bad Clusters 303 (1Mb) Clusters in 222 Directories 5,529 (

cfdisk partion errors

hi, i seem to have a problem that came about from using cfdisk. are there any ways to correct or edit partition errors? allan -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .

smartware from angoss

hi, i used to use a dos office automation package called smartware and it was so far in advance of anything else at the time. the spread sheet was the best of its time. now i see that it is availabel as an impaired free download at: www.angoss.com. so have any of you out there used the package?

Re: Ultra SCSI

Hi, i was wondering if any of you could please list the better places to buy scsi disks and controllers in the usa? allan -Original Message- From: Michael Neuffer [EMAIL PROTECTED] To: Kevin Traas [EMAIL PROTECTED] Cc: Linux-Net Mailing List linux-net@vger.rutgers.edu; Debian User List

partioning disk when running windows 95

Hi, i have the floppies and i am getting ready to partion disk using fips and cfdisk. well i ahve started and even when going to a dos mode it seems that a win 95 is a hostile machine. i used fips and now i see that part of my disk has an unreconiable format. does anyone have ideas? allan --

fdisk is it available anywhere else?

Hi, I am getting ready to partition my disk and i must say that the tool that debian uses does not look as friendly as the fdisk that comes with other distributions. i was wondering if i can find fdisk for linux elsewhere or should you have any hints for using the debian tools. thanks, allan

Linux as a career path

Hi, this may be a side issue,however, it seems that the world is starting to really notice linux. it seems that there is a movement afoot for recognizing the expertise of linux pros. the day may be coming when ,linux will be used in more commercial establishments. i have been studying for a ms

Druid

Hi, I have heard that there is a new package for partitioning a disk drive called druid. it does much of the things that fips claims to do in an even more dynamic and flexible manner. regards, allan -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] .

autodetect on debian

hi, i was wondering about the autodetect capabilities of debian, does it exist? allan -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .

Re: autodetect on debian

Hi, i was talking about autodetect of hardware as will be available on redhat 5.0? allan -Original Message- From: Ben Pfaff [EMAIL PROTECTED] To: butch [EMAIL PROTECTED] Cc: debian-user@lists.debian.org debian-user@lists.debian.org Date: Thursday, November 20, 1997 9:58 PM Subject: Re

Has anyone bought the debian book and cds?

Hello, well i was in JR music worlds computer store and i saw the set- ,and they have a really good price on it. has anyone bought it and what are your opinions of the value for money? allan -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble?

anyone use cdroms from l debian book

Hi, I saw the book fronm linux press at JR music world today. so has anyone used the set, also what are your impressions? allan bart -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .

Comparison of ultra dma disks vs scsi?

Hello, I have been planning to put together my ultimate linux machine and and when i get to the disks system there seems to be a successor to scsi for the ultimate price/performance. has anyone used an ultra drive and how does the actual perfomance compare to uw scsi? thanks, allan -- TO

Advansys Scsi Adapters

Hello, I was wondering about the experience of users of these adapters with linux? it seems that adaptec has not really been that open to the linux community. allan -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL

the growth of linux workstations

hello, I just wanted to note an article from the ieee spectrum for september that was speaking about the trends in the workstation marketplace. it notes that the market for pro. workstations is dramatically shifted from unix to nt and there was another component- LINUX. So keep up the

The Value of TEX

hello, I am a newbie to linux and i keep hearing all of these postings to the groups about tex. my question is just how long would it take to be proficient and is the program really relevant at this period of time? allan -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to

looking for opinions on scsi adapter cards

hello, i am looking to build my own computer system and i think scsi is the best way to go for pure performance. so iwas wondering about what the members here like? allan -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL

Building the Ultimate Linux NT System

Hi, I have had a real nightmare trying to get linux up an running on my lowly compaq presario. It was a decent windows 3.1 machine and it has over 32mb of ram, but mounting the scsi cdrom on the sb16 adaptec 1510/1522 combo is a real pain. Therefor i have decided to go and start building a real

Building the Ultimate Linux NT System

Hi, I have had a real nightmare trying to get linux up an running on my lowly compaq presario. It was a decent windows 3.1 machine and it has over 32mb of ram, but mounting the scsi cdrom on the sb16 adaptec 1510/1522 combo is a real pain. Therefor i have decided to go and start building a real

Re: How do I find the source of the spammers?

configuration changes to sendmail that will allow you to control who uses your server to relay mail. Butch Butch Kemper | Free sound advice available Brazos Internet Consulting Group | 95% sound and 5% advice 409-361-2324 | Refunds cheerfully provided

upgrading cmos of compaq 833 cds?

Hello, I would like to upgrade my capabilities for running linux and win applications. i have purchased a fireball 1.7GB dirve and i would like to add it as a slave to the original pathetic 270mb drive. does anyone here know what software for setup i may need from the compaq web and ftp

Re:mgetty for PPP; Need help

of auto-answer mode. Seems that mgetty wants to answer the call instead of letting the modem do it. Butch Butch Kemper | Free sound advice available Brazos Internet Consulting Group | 95% sound and 5% advice 409-361-2324 | Refunds cheerfully

Experiences of Multiple CPU users?

Hello, I would like to know if there is any debian software that smokes with multiple cpu's? allan - Name: Allan W. Bart, Jr. E-mail: [EMAIL PROTECTED] Date: 5/3/97 Time: 5:03:33 PM This message was sent by Chameleon -

Using Debian As Networking Teacher

-Hello, I was wondering how valuable debian wqould be as a backaground in learning networking administration, such as a ladder to learning solaris systmes fundamnetals. i know they are different, are they close in any areas? allan Name: Allan W. Bart, Jr.

Perl On Linux Where?

Hello, I am a newbie, but i would like to install perl on my debian system, can anyone tell me where it is located and how much space will it take. thanks allan i like to use the miami ftp site - Name: Allan W. Bart, Jr. E-mail: [EMAIL PROTECTED] Date:

quality of development tools

Hello, I have just started using debian and there is an area of interest to me, learning basic programming. i have used some of the borland products and now have an older version of visual basic. my question is how does the combination of x and the native packages available for debian

Linux The prefered os of haker pros

Hello, I wonder if anyone read the article in todays new york times about the highly paid circle of pros at ibm who are paid very well for cracking into computer systems . there was a picture of a seedy man with a parrot on his shoulder- he uses powerfull computers powered by linux. so what

Has anyone used multi- cpu's on debian

Hello, with the cost of multiple cpu motherboards going down i was wondering if anyone has created a super debian system? allan ps what apps are you runnning? - Name: Allan W. Bart, Jr. E-mail: [EMAIL PROTECTED] Date: 3/14/97 Time: 10:51:54 PM This message

x windows

Hello, well i got 1.2.2 installed and i was wondering about x windows, could anyone tell me how much disk space i will need to run this. i have an old 386 with 4m ran and 20mb of swap space. looking forward to hearing from you. allan - Name: Allan W. Bart,

Ok I finally got debian running now what?

-Hello, My 386 is purring and i myst say that the install is correct, so far and it was much simpler than reading the installation instructions. so which packages would be logical to install first? allan Name: Allan W. Bart, Jr. E-mail: [EMAIL PROTECTED]

the key to debians future may be marketing

Hello, I think it is crucial to have a system such as debian win major acceptance by going after a niche market; getting publicity via some strategically placed relationships with applications developers and seeking a reputation for innovation and excellence. i think it is possible to

Marketing Debian

-Hello, thinking about moving debian to its correct position might be enhanced by well placed articles in tech publications and even corporate oriented ones such as computerworld, ifoweek, datamation. the only problem is who will write them and what is our mission. the mission statement is

When will the 1.2 mb rescue disk be available?

hello, i was wondering when it would be possible to download the disk so that i can put my old northgate on linux? allan - Name: Allan W. Bart, Jr. E-mail: [EMAIL PROTECTED] Date: 1/18/97 Time: 7:52:20 PM This message was sent by Chameleon

does anyone know where to get 1.1?

Hello, it seems that the emergency disk for 1.2 is not available, therefore i cannot use this old northgate, does anyone know where to get 1.1? allan - Name: Allan W. Bart, Jr. E-mail: [EMAIL PROTECTED] Date: 1/18/97 Time: 9:12:37 PM This message was sent

Can anyone send me the 1.2mb rescue disk

Hello, i know that this is a lot to ask ,but i would like to set up my linux system over the weekend. could anyone email me the 1.2mb rescue/boot disk. allan i can ftp also - Name: Allan W. Bart, Jr. E-mail: [EMAIL PROTECTED] Date: 1/19/97 Time: 7:16:32 AM

can debian be installed without rescue disk

Hi, I have made the disks and they i read them install, they mention the rescue disk, there is not one for 1.2mb allan - Name: Allan W. Bart, Jr. E-mail: [EMAIL PROTECTED] Date: 1/18/97 Time: 12:16:00 PM This message was sent by Chameleon

where is the 1200bin rescue disk

hello, i am looking for the files for the 1.2mb rescue floppy rescue disk. can anyone tell me where it is? allan - Name: Allan W. Bart, Jr. E-mail: [EMAIL PROTECTED] Date: 1/13/97 Time: 8:09:40 PM This message was sent by Chameleon

can hercules graphics cards work with debian?

--Hello, I have an old northgate unit that i wish to use as a non graphics unit on debian and i wish to know could i use it as is? it only has a herc mono card- hey this was a 4000 dollar unit in 89!! allan--- Name: Allan W. Bart, Jr. E-mail: [EMAIL PROTECTED]

Re: DEBIAN 1.2 DISKETTE PROBLEMS UPDATE

to an active dns server. 3. The ip address of the dns server in resolv.conf is not correct. I hope this helps. Butch Butch Kemper | Free sound advice available Brazos Internet Consulting Group | 95% sound and 5% advice 409-696-6057

Re:Continued Debian Boot Problems

at boot under 1.2 when it was working under 1.1? 2. Is there some interaction between the boot command linux cm206=0x350 and the hanging of the ethernet driver? 3. How do I fix it? TIA, Butch Butch Kemper | Free sound advice

Re:Continued Debian Boot Problems

At 9:51 -0600 on 12/11/96, Butch Kemper wrote: Using the suggestion by Bruce that I boot the system with the command linux cm206=0x350, the system now boots. However, the system now hangs when it is loading the WD driver. Booting from the Debian 1.2 disks dated 96-12-8, I get

Continued Debian Boot Problems

' wd.c:v1.10 9/23/94 .. eth0: WD80x3 at 0x300 00 00 C0 A6 D2 24 WD8003, IRQ5, shared memory at 0xb800 0-0xb9fff Does anyone have another suggestion/ Thanks. Butch Butch KemperFree sound advice available Networks 'R Us 95% sound and 5

Debian Boot Problem

$ The cursor is left following the last $. This problem occurs with the boot disks and the the system I built. The boot disk will comeup on another system but not this one. I had built a system with 2.0.23 and it was okay. Does someone have some suggestions? Thanks. Butch Butch Kemper

Re: Goodbye, all! (Whatever became of X3.2)

Hello, what is happening to the debian distribution? is it folding? allan - Name: Allan W. Bart, Jr. E-mail: [EMAIL PROTECTED] Date: 11/30/96 Time: 1:21:37 PM This message was sent by Chameleon - -- TO UNSUBSCRIBE FROM

nlists.h and bind

I am attempting to compile bind495-REL and it is failing because the nlist.h header file is missing. Obviously, I have failed to install a need package but so far, I haven't been able to determine which package. Can someone help me? Thanks. Butch Butch Kemper | Free