My other letter doesn't seem to have made it through to the list, so I'm
posting a different version...
I did a recent reboot into my Sid box after the kids played a few Windoze
games, and found a few bizarre behaviors.
I cannot fetch mail from my server. Typical message:
---
daddy:~#
At 10:53 PM 5/9/00 +0100, you wrote:
Eric Gillespie, Jr. [EMAIL PROTECTED] wrote:
I'd like to set up ipchains so that no on can connect to my
dialup computer at all except for identd (for IRC). I read the
Firewall and IPCHAINS howtos, as well as the ipchains man page,
and it looks like the
At 08:45 AM 5/5/00 -0700, you wrote:
Hello all,
After nearly deciding to settle for the commercial sound drivers, yet
another post from this list (thanks all!) urged me to retry the ALSA
drivers. I went back and again compiled the latest source after fully
cleaning out my system. What made the
At 10:25 PM 5/3/00 -0700, Chris Baker [EMAIL PROTECTED]
wrote:
[EMAIL PROTECTED] writes:
On Wed, May 03, 2000 at 05:25:14PM -0700, [EMAIL PROTECTED] wrote:
Did you compile in the 'sound' module or leave it as a module? I've seen
...
Yes. The es1371 driver is compiled directly into the
I'm using the 2.2.14 kernel on an Asus k7V mb(Athlon), and have compiled
into the kernel the ES1371 sound driver. On bootup the card is detected at
irq 10 and a memory address of 0x9000 (which does NOT happen with the
ES1370 driver).
I have added myself (as a normal user) to the audio and cdrom
At 01:16 PM 5/3/00 -0600, you wrote:
[EMAIL PROTECTED] wrote:
I'm using the 2.2.14 kernel on an Asus k7V mb(Athlon), and have compiled
into the kernel the ES1371 sound driver. On bootup the card is detected at
...
Did you add ens1370 to /etc/modules? I know I've made that mistake
before...
At 09:41 AM 4/11/00 -0700, you wrote:
It's not Debian you are matching your card up to, it's xfree86. In fact,
you will want to upgrade xfree86 to 3.3.6, so it will support your card.
I just built a couple machines with Matrox G200 16 MB cards and they work
well. I am not a gamer, so I couldn't
At 08:07 PM 3/16/00 -0500, you wrote:
CB == Chris Brown [EMAIL PROTECTED] writes:
CB Sounds like the CDROM drive at home is having problems
CB physically reading the data off of the media. This could have a
CB couple of causes. Media could be one --- I have a 52x Creative
...
Turns
At 05:37 PM 3/16/00 -0800, you wrote:
Colin == Colin Watson [EMAIL PROTECTED] writes:
Colin I don't know if any of this helps, but let me know if
...
Bruce sent me a similar email, there's nothing unusual in either of
your configurations. Hmm.
Could you both send me the output of
cat
At 08:07 PM 3/16/00 -0500, you wrote:
CB == Chris Brown [EMAIL PROTECTED] writes:
CB Sounds like the CDROM drive at home is having problems
...
Turns out the problem was a bad CD-ROM drive. The CD-ROM refused to read
...
I'm coming in on the tail end of this one, but ran into something
Here I am, stuck at work, Linux not allowed on the network... :(
I want to use latex/lyx and have installed the latest Slink versions of
tetex* off debian.org (WinNT serves as my in-between), but the install
script reports the following:
Running initex. This may take some time. ...
fmtutil:
Sorry, but I cannot figure out how to get mail to other people on our LAN
using exim. Those I send are booted back saying they don't exist on my
machine. Mail should go to a server, but it treats all with the same domain
as being on my machine. Have gone through the manual but I guess I'm
On Wed, Sep 29, 1999 at 06:03:09AM +0100, Mark Brown wrote:
On Tue, Sep 28, 1999 at 07:49:21PM -0700, Seth R Arnold wrote:
On Tue, Sep 28, 1999 at 04:51:57PM -0700, [EMAIL PROTECTED] wrote:
Sorry, but I cannot figure out how to get mail to other people on our LAN
using exim. Those I send
including a partial of
kern.log below which reflects dmesg. Following that is the ifconfig for
tr0.
Thanks for any help/thoughts!
Kenward Vaughan
kern.log excerpt:
Sep 27 06:54:07 kvaughan kernel: ibmtr.c: v1.3.57 8/ 7/94 Peter De
Schrijver
Sep 27 06:54:07 kvaughan kernel: v2.1.125
On Fri, Sep 17, 1999 at 12:55:04AM +0200, Marcin Owsiany wrote:
On Wed, Sep 15, 1999 at 09:53:01PM -0700, [EMAIL PROTECTED] wrote:
I'm having problems with my system on rebooting to a new kernel. I don't
know
what is causing the problem, and have found nothing yet in the archives
On Thu, Sep 16, 1999 at 10:52:17PM -0500, rich wrote:
I remember reading today / yesterday that someone had problems with
Wingz on a 48MB system... I just downloaded both Wingz and WingzPro,
installed them in under 5 minutes and both run very smoothly and quickly
on my 32MB 200Mhz Pentium I
On Thu, Sep 16, 1999 at 06:31:32PM -0700, [EMAIL PROTECTED] wrote:
Ah, that was me. Perhaps I set it up wrong? Wingz complined about not
having libg++27 and libstdc++27. Was I wrong to soft-link and ldconfig the
libg++2.7.2 and libstdc++2.7.2 libs to these?
Sorry, I meant libg++.so.27 and
I am frustrated with trying to use dhcpcd... after it hooks up with our
network, my machine becomes UNKNOWN_27 instead of kvaughan. The hostname is
correctly set up if I keep dhcpcd from starting up. Can someone tell me how
to fix this? I've even tried using HOSTNAME='cat /etc/hostname
On Fri, Sep 17, 1999 at 07:54:28AM -0700, Craig B wrote:
snip
However, i did not even get
an sound.. message in the startup.
[...]
during kerenel initialization, then you have not compiled support into
your kernel. Do a make mrproper then make config from withing your
kernel source
On Thu, Sep 16, 1999 at 09:58:20AM -0500, John Foster wrote:
[...]
IBM has made the public statement that they will be supporting Linux.
Since IBM bought out the Lotus folks there is at least a chance that we
will see the entire office suite and many other IBM applications ported
to Linux.
On Tue, Sep 14, 1999 at 07:05:25PM -0500, Nathan E Norman wrote:
On Tue, 14 Sep 1999 [EMAIL PROTECTED] wrote:
: Installing a 2.2.9 kernel in place of 2.0.36 kills my network card and
: connections, since the card is a token ring (Olicom). This card is ID'd as
: eth0 under the old kernel,
Installing a 2.2.9 kernel in place of 2.0.36 kills my network card and
connections, since the card is a token ring (Olicom). This card is ID'd as
eth0 under the old kernel, but the 2.2.x kernels use tr0. So the problem
doesn't surprise me. But I'd obviously like to get it working again.
I'm
What do I need to do permission-wise (and otherwise?) to allow me as a
normal user to mount network systems via ncpmount?? I've set up a dir
/mnt/net with a symlink to /net to simply the mount point, with all
permissions to the dir set to 777, but permission is still denied. Do I
have to place
Hi,
I'm about to compile 2.2.10 for my work machine, and as usual simply follow
the Fine manual which comes with the package. This time around, though, I
noticed no reference to linking /usr/include/{asm||linux||scsi} to dirs
under the source. Is this no longer necessary, or is it a grievous
Got a package which is encrypted ... crypt (as mentioned in the docs for
unraveling it) does not exist. I can't find a package called crypt but saw one
which integrates into Emacs (if that will even do what I'm looking for). I
naturally don't have (nor really want) Emacs installed, but if this
On Mon, Apr 26, 1999 at 06:54:32PM +0200, Thorsten Manegold wrote:
[...]
I heard that it's supposed to be supperior. As a matter of fact that
is the main reason for me to try Debian (I started out with SuSE and
am still using it. However I don't like the way they package things
as it's not
In [EMAIL PROTECTED], on
04/20/99
at 05:22 PM, Madel, Kurt [EMAIL PROTECTED] said:
don't quite cut it for the corporate world. But I don't see any reason why
the HP's or IBM's couldn't include Debian as one of the distributions they
support.
It would seem you have hit at least part of the
In [EMAIL PROTECTED], on
04/09/99
at 08:52 AM, Jonathan Guthrie [EMAIL PROTECTED] said:
Of course it is! If the LAN was mostly static, then I'd suggest using the
/etc/hosts files on each computer, but if things are going to change with
any frequency at all, then you'd probably want to set up
I have set up Debian on four lab computers and would like the students using
them to be able to access our Novell system via ncpmount, etc., as well as
floppies. Additionally, it would be nice if they could shut down without my
intervention.
Can I simply add them to specific groups which would
In ongoing efferts to get networked here (work), I may wind up taking my
Olicom card out of PNP mode to get things working. If so I'm presuming I'll
need to set up parameters somewhere. Can anyone point me in the right
direction?? I'm quite green at this stuff.
Along a similar line ... does a
I have a bunch of files (est. 200) which were brought over from OS/2 after
being detached from emails (I've not got Debian networked yet here at
work--subject of another post).
All of them have this control character (^M) at the end of each line, as
seen in vi (which I know v. little about
'Tis true. Do I need Caldera's client for this? I think the basic problem
is below this, though.
I've compiled Olicom's token-ring network card driver into the kernel with
no problems. Bootup gives apparently normal messages in this regard except
a test download failure. I also get an
Wow! Thanks for the quick replies, people. Now I get to play with several
approaches.
Are there any good books (starting at a basic level working up) for things
like this? Perl seems to be a hot thing for Linux (as well as shell
programming/scripting). While it will take me a while to get up
33 matches
Mail list logo
