Tracker is down here also!
On 19 September 2015 at 11:03, mls wrote:
> Hi all,
>
> when I try to download debian ISO images via bittorrent I get an error
> message:
>
> Error: invalid data from tracker
>
> when accessing http://bttracker.debian.org:6969/announce.
>
> Using wget I
Tim,
>From what I remember it's best to set it up when you installing the
system, then you can install the bootloader to /boot in RAID 1.
https://blog.sleeplessbeastie.eu/2013/10/04/how-to-configure-software-raid1-during-installation-process/
is what I followed.
Thanks,
Edmund
On 18 September
Hi,
I removed allow-hotplug eth0 and it still does not auto configure :(
Where would i find log files to diagnose this?
Thanks
On 16 September 2015 at 20:55, Sven Hartge <s...@svenhartge.de> wrote:
> linuxthefish <linuxthef...@gmail.com> wrote:
>
> > After I reboot m
is as follows:
auto lo
iface lo inet loopback
auto eth0
allow-hotplug eth0
iface eth0 inet static
address 172.16.0.30
netmask 255.255.0.0
allow-hotplug wlan1
iface wlan1 inet static
wpa-ap-scan 1
wpa-scan-ssid 1
wpa-ssid connect
wpa-psk linuxthefish
address
:
linuxthefish wrote:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 172.16.0.4
gateway 172.16.0.1
netmask 255.255.0.0
allow-hotplug wlan0
iface wlan0 inet static
wpa-conf /etc/wpa_supplicant/wpa_supplicant0.conf
address 172.16.0.5
gateway
Hello,
It looks like Debian will only connect to a wireless network when the
ethernet cable has been plugged in and unplugged. Both the wired and
wireless connections are set to automatically come up - but wireless
will not come up and fails to respond to ping unless a ethernet cable
has been
6 matches
Mail list logo