searchers, and doesn't tolerate
service fails).
Thanks very much for all who can cooperate to solve this problem.
Bye!
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
On Thu, 23 Dec 1999, Ethan Benson wrote:
> On 23/12/99 Luis Campos de Carvalho wrote:
>
> > I'm a brazilian sysadm with a big trouble:
> > I need some way to allow user-level programs to achieve file-locks
> >(exclusive access file locks, more specifi
hello
i am using a travelmate 5300 (texas instruments) notebook
when in text mode try to enter the display saver, the display blicks
for a moment, and then, instead of clearing the display and blank it,
jost drop the next line
apm: set display ready: Interface not engaged
and this behaviou
there are no big problems
just install debian using the inestable version (kernel 2.2.12)
evrything will be all rigth :-))
hello
are there some network (switch and cards) that have low latency times
(perhaps of the order of 20-30 microseconds), but that were not so
expensive ? it is intended for a modest, experimental and no numerous
athlon cluster
i have tried with a 10 mbps hub and 2 k7-550 cluster, but the results
Debianized Regards for all.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Luis Campos de Carvalho
System Administrator at ECB -- Escola Paulista de Medicina
"Do not expose your LaserWriter to fire or intense heat."
-- Apple LaserWriter Manual
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> From [EMAIL PROTECTED] Wed Dec 22 04:06:42 1999
> Delivered-To: [EMAIL PROTECTED]@fixme
> Date: Tue, 21 Dec 1999 20:06:44 -0600 (CST)
> From: Phil Brutsche <[EMAIL PROTECTED]>
> X-Sender: [EMAIL PROTECTED]
> To: luis <[EMAIL PROTECTED]>
> cc: Debian-User
> From [EMAIL PROTECTED] Wed Dec 22 05:01:29 1999
> Delivered-To: [EMAIL PROTECTED]@fixme
> Date: Tue, 21 Dec 1999 21:02:24 -0600 (CST)
> From: Phil Brutsche <[EMAIL PROTECTED]>
> X-Sender: [EMAIL PROTECTED]
> To: luis <[EMAIL PROTECTED]>
> cc: Debian-User
>
> ALL: ALL
>
> 3. Check your firewalling rules:
>
> $ ipfwadm -Il
> $ ipfwadm -Ol
>
> Look for "deny" rules on the telnet port.
>
> Post your results to the list. Good luck.
>
> Marc
>
> >>> luis <[EMAIL PROTECTED]> 12/21 2:11 AM
hello
when i connect using ppp and get a dynamic IP as 195.243.107.221 i can
not make a telnet to me from another machine
from another machine (cenected using eth0) i can ping to the machine
using ppp, but when i try to make a telnet to the ppp machine i always
get the following:
trying 195.243.
hello
sorry, my problem with sendmail is that all the messages are deferred
how can i disable this behaviour ?
thanks a lot
hello
i have a problem with sendmail
i can not receive any email, neither local mail
when i run sendmail , it says: root ... Recipients names must be specified
and when i put mailq, i get the messages i have sended as waiting in the
queue
i have uninstaled and reinstaled sendmail but nothing c
hello
a humble question: is possible to make a succesful telnet to an IP as
195.243.107.55 ?
if not, why ?
thanks a lot
hello
how can i fix an IP using PPP?
i have a fixed IP that i use when using eth0, and i would like to use
it also when using ppp0
i have tried putting the IP address in the /etc/ppp/peers/provider,
but the ppp conection cannot still be established under my static IP
what things i could have mi
hello
i have worked with an acer modem 56 Surf, ACER56HCK_1, class 1
i cxan do almost evrything (ppp, send fax, minicom) but when it comes
to receive automatically faxes, the modem never picks up the call, and
never takes the fax call, manually i can receive fax, but not
automatically
is this a
hello
i have a (for me) strange problem
when i shutdown the machine, after the Power Down. sentence i get more
than a page of strings, come of they say:
Unable to handle kernel paging request at virtual address 886f
current->tss.crt3=03d61000,%cr3 = 03d61000
*pde =
Oops:
CPU:
hello
how can i install a sort of mbr that runs before lilo ?
because after having instaled debian i need to install a dos
partition, but as hda1 is the swap, hda2 linux and hda3 is dos, lilo
can not load the last partition (far beyong the 1024 kbytes limit)
so, is possible to boot the dos parti
hello
in which debian package can i found the mkfs.msdos file system builder ?
thanks a lot
hello
i continue interested in making my box to power-on-ring
i have enabled the option in my BIOS setup: and they say wake-on-ring
and assigned the irq to the modem
but (as usual) things dont work
i have a GA 7IX motherboard, an external acer modem
i read in the motherboard manual that there
hello
another question, please forgive me:
which module i must install in the kernel to make work a terratec 128
i PCI sound card?
i get the following lspci -vv for this card
thanks a lot
00:0b.0 Multimedia audio controller: ESS Technology ES1969 Solo-1 Audiodrive
(rev 01)
Subsystem:
hello
nop, unfortunately no
i can:
ping machines outside my lan
i can not:
ping machines inside my lan
ping me myself (to my IP) from other machines !
where could be the mistake ?
thanks a lot
hello:
i have a trouble :-)
in ppp, i get with ifconfig ppp0:
ppp0 Link encap:Point-to-Point Protocol
inet addr:195.243.107.196 P-t-P:192.168.100.254 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:132 errors:0 dro
hello
with ppp, i can make a telnet from my local linux to a remote host, but
i can not make the inverse, a telnet from the remote to my local
which course of action must i take?
thanks a lot
hello
forget my previous problem, now i can get thoe following route
Kernel IP routing table
Destination Gateway Genmask Flags Metric RefUse Iface
192.168.100.254 * 255.255.255.255 UH0 00 ppp0
localnet* 255.255.254.0 U
hello
how can i specify the IP address of the gateway to contact to the ppp0
conexion?
i get the following route
thanks a lotKernel IP routing table
Destination Gateway Genmask Flags Metric RefUse Iface
192.168.100.254 * 255.255.255.255 UH0 0
hello
how can i specify the gateway address to the ppp0 conexion?
thanks a lot
hello
how can i switch as the default route, between eth0 y ppp0?
is for a machine that need to get access to the net in both ways,
either using the ethernet card or with the modem
the ethernet card is ok, the modem can fax and minicom, i also have
access to the ppp conexion, and i get an IPm bu
hello
please froget my mail concerning my class 1 modem
all i need was to download tthe last version of the efax package
thanks a lot
hello
which package i muss use to send faxes with a class 1 modem
i already can use minicom with it
thanks a lot
hello
i need to change the IP and name of one machine
which are the files i need to change?
thanks a lot
I know that you can run linux box as NIS+ client, but I've never heard about
> setting up linux as a NIS+ server.
> I run NIS+ on Solaris.
>
>
> On Thu, Nov 25, 1999 at 06:19:54PM -0600, Luis Gustavo Madrigal Salazar
> wrote:
> > I know how to do it with NIS, bu
hello:
i have the following modem:
Arowana Modem 56k Intern PCI Rockwell
and i get the following result with lspci -vv :
---
00:0a.0 Communication controller: Rockwell International: Unknown
device 2114 (rev 01)
Subsystem: CIS Technology Inc: Unknown device 2114
Control: I/O+ M
I know how to do it with NIS, but I don't want to put my NIS+ servers in
NIS compatibility mode (security reasons). I need NIS+.
On 26 Nov 1999, Brian May wrote:
> >>>>> "Luis" == Luis Gustavo Madrigal Salazar <[EMAIL PROTECTED]> writes:
>
>
Has someone successfully install NYS on debian?? Do you know how to make
it on Red-Hat 6.1?? In both cases I can see the NIS+ tables, but I can't
perform a login.
(how) can i power on a remote machine (via internet) using a modem ?
thanks
hello everybody:
is there any package that enables me to measure how many flops a
machine runs?
thanks a lot
hello everybody:
which are the options to have recognized by linux more than 64 mb of ram?
i have put a line in /etc/lilo.conf, stating :
append="mem=128m"
are there other ways to accomplish it, maybe better ?
thanks a lot
hello everybody:
how can i make a 2.2.13 kernel rescue boot disk?
(instead of the 2.0.36 one)
seems to need it for an athlon debian installation
thanks
hello everybody
i have changed the kernel compressed image to a 2.2.13 in the rescue
disk, but obviously the kernel can not mount any root fs, because i am
trying to install debian
using an athlon processor, trying to install debian
how can i make a rescue disk with a 2.2.13 kernel?
or more gen
hello everybody:
i am installing debian in the following box: amd athlon 550 mhz, 13.6
gb hd, 128 mb ram
when i give to the rescue floppy (at installation) the process
stops at:
"md driver 0.36.3 MAX_HD_DEV=4, MAX_REAL=8"
it seems to me that the machine hangs when looking for some SCCI card
h
hello everybody:
i am installing debian in a new box (athlon 550 MHz, 13.6 gb hd, 128
mb ram), but when i give to the rescue floppy the instlation
process stops at the line:
md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8
which is the md driver?
how can i fix this problem?
thanks a lot
hello everybody:
which is the difference between an ATI AGP and an ATI Xpert AGP video
cards?
thnaks a lot
hello everybody:
which is the difference between an ATI AGP video card and an ATI Xpert
AGP card?
are both usable in linux? which is better?
thanks a lot
hello everybody:
a humble question
is there any sotware that could enable me to make voice phone calls inside the
internet? pc-phone calls? pc-pc calls?
i only use my dos partition to make this pc-phone calls inside the internet,
using the vocaltec software, because it saves me money and i can
where is the script to start tha named?(if exists one)
How can I display the actual values of system parameters? something like
sysdef -i on Solaris.
Is there a file to change them? or a command? something like /etc/system
on Solaris
/etc/ftpwelcome works but I still get the FTP server (Version
6.2/OpenBSD/Linux-0.10) message...I want to disable that message!!
On Fri, 15 Oct 1999, Joop Stakenborg wrote:
> On Fri, Oct 15, 1999 at 12:48:11AM -0600, Luis Gustavo Madrigal Salazar wrote:
> > Is there something like issu
Run it with -y
apt-get will assume "yes"to all prompts and will run non-interactively.
sorry for the other message!!!
On Fri, 15 Oct 1999, Pollywog wrote:
> I ran 'apt-get -d upgrade' from an 'at' command and just figured out why this
> did not work. When it is run, apt-get asks if I really wa
Run it whi -y
apt-get will assume yes to all prompts and will and non-interactively
On Fri, 15 Oct 1999, Pollywog wrote:
> I ran 'apt-get -d upgrade' from an 'at' command and just figured out why this
> did not work. When it is run, apt-get asks if I really want to download, and
> since there is
Is there something like issue.net for the ftp service
I want to disable these message: (Version 6.2/OpenBSD/Linux-0.10) ready.
Another posibility is to change to another ftp packagewhich one is the
best?
HI
Could you tell me if is it possible to recover a NT disk formated with
linux?
I had a 6Gb disk with 3 partitions (2GB for NT, 2 Gb for win95 and 2Gb
free)
and i tried to install the RedHat Linux on the free disk space.
I choose the linux server custom instalation and it formated all the disk
w
HI
Could you tell me if is it possible to recover a NT disk formated with
linux?
I had a 6Gb disk with 3 partitions (2GB for NT, 2 Gb for win95 and 2Gb
free)
and i tried to install the RedHat Linux on the free disk space.
I choose the linux server custom instalation and it formated all the disk
w
HI
Could you tell me if is it possible to recover a NT disk formated with
linux?
I had a 6Gb disk with 3 partitions (2GB for NT, 2 Gb for win95 and 2Gb
free)
and i tried to install the RedHat Linux on the free disk space.
I choose the linux server custom instalation and it formated all the disk
w
How can I set my linux to display a banner before it prompts for login?
I can do it in solaris by editing /etc/default/telnetd
en accessible to all users and using a directory
under /usr/local don't conflict with the package system.
HTH
Luis
Hello!
Once again with the same problem.
It keeps giving this messages:
dst cache overflow
NET: 7 messages suppressed.
dst cache overflow
NET: 6 messages suppressed.
dst cache overflow
dst cache overflow
Any idea of the causes and/or solutions.
Thankx,
Luis Quintano
Hi
I have just connect two computers with windows 98 with a
RJ45 inverted cable, trought it's network boards.
How do I configure the windows 98 network in order each one
see each other ?
Thanks
Luis
__
Get your free web-based email at
Hello!
One of the linux/debian machines I'm administrating has been given some
problems. It keeps giving this kind of messages:
NET: 7 messages suppressed.
dst cache overflow
NET: 4 messages suppressed.
dst cache overflow
NET: 1 messages suppressed.
dst cache overflow
dst cache overflow
NET: 1 me
Did you try the line hosts:.. on /etc/nsswitch.conf??
it shold look something like this :
hosts: files dns
On Fri, 27 Aug 1999, Fredrik Ax wrote:
>
> My problem is that the /etc/hosts files doesn't seem to be used
> when resolving hostnames.
>
> I'm runing Debian 2.1 r2 with
> Linux kernel
Please I want to subscibe to
Debian-User
E-Mail: [EMAIL PROTECTED]
> hi
>
> i recently installed slink on a compaq 486 laptop w/ 4 megs ram and a 100
> meg hdd. dselect downloaded a _few_ packages for me, but during the
> installation process the disk became full. i tried using dselect to
> remove unwanted packages but it doesn't work beyond the first menu
> a
hallo
does anybody knows why the debian instalation process (configuration of pcmcia
support) does NOT find the /sbin/cardmgr for a i82365 controller?
thanks
hallo
anybody knows what does mean the following?
hd running, led of pcmcia ethernet card on
last statement displayed "starting pcmcia services: modules cardmgr"
but since that moment, the machine makes nothing (it freezes)
what does it mean?
notebook travelmate 5300 ti
linkport ethernet pcmc
hey fellows!
this is my fourth email in the same topic
can anybody help me?
instaled debian on a travelmate 5300 ti notebook, linkport compex etehrnet card
used modconf to add modules
if i add the i82365 controller, the machine freezes after "starting pcmcia
modules"
if i add try to add the
hallo
i have isntalled debian in a travelmate 5300 notebook ti, with a compex
linkport
ethernet card
when i choose the Intel i82365SL-compatible type controller the card ligths its
leds but the machine freezes in the booting process after:
"starting pcmcia services: modules cardmgr"
if i cho
hallo
i have installed debian linux on a notebook travelmate 5300 (texas instruments)
but my pcmcia ethernet (compex linkport) card does not work
what can i do?
which are the steps i have to follow in order i can connect to the net with my
pcmcia card?
thanks
hallo
i try to install debian linux on a notebook Travelmate 5300 (from Texas Inst.),
but (as i will install the debian applications from the internet) when i
configure the pcmcia support in the dbootstrap, the computer freezes and the
instalation is stopped
my pcmcia ethernet card is a LinkPo
On Mon, Jun 07, 1999 at 11:47:08PM -0400, Stuart Ballard wrote:
> "Luis M. Garcia" wrote:
> >
> > ""Raphaël\"@[EMAIL PROTECTED]"[EMAIL PROTECTED],
> > wrote:
> > >
> > > I have d/l gnome-apt with apt-get and it of course has d
was caused because the gdk-imlib1 package
was not updated during the gnome install (is this a bug in the dependencies?).
I solved it with:
apt-get update
apt-get upgrade
This should upgrade all your packages to an up-to-date version.
HTH. Regards,
Luis M. Garcia
> /usr/X11R6/bin/WindowMaker fatal error: crashed while trying to do some
> post-crash cleanup. Aborting immediatelly.
I suppose these errors are consequence of the first one.
HTH
Regards,
Luis M. Garcia
On Mon, May 10, 1999 at 12:47:04AM +1000, Robert Norris wrote:
> > 1 - My X server since installation starts automaticly... I don't want it to
> > auto - start. How do I take that option out?
>
> I'm guessing you mean xdm. If your system is like mine, you'll have a file
> /etc/X11/config. In their
On Thu, May 06, 1999 at 03:40:14PM +0200, Krosigk, Lorenz Von wrote:
> I'm trying to compile the version 1.1 of KDE using the makefiles that came
> with the tar.gz files i'm using. In the case of kdebase the make is looking
> for a program called MSGFMT. But that's not installed and I don't find it
ry it briefly once and noticed no particular differences. Anyone know?
Thanks-
Luis
P.S. I'm only subscribed to the digest version, so if you could cc: me
that'd be great...
###
"They call the fai
hool account to detect and fix it
automatically- that seems like a hack to me.
Anyway, thanks in advance for any help- please remember to CC me-
Thanks-
Luis
###
"They call the faithful to t
ources.
3) http://slashdot.org/article.pl?sid=99/04/14/0042212 is /.'s thread on
this- lots of interesting observations and criticisms. Make sure you set
"Highest Scores First"- otherwise you will have to search forever to find
the pertinent ones.
Good luck- I'd strongly
;
> > > Thanks, Mitch. It works, and I happily have ssh. I'm still curious,
> > > though: why is non-US called a distribution in apt, when it is in fact a
> > > component? Is this historical or what?
> >
> > I don't really know, Luis. It se
Thanks again-
Luis
###
"They call the faithful to their knees
to hear the softly spoken magic spell:"
"There's no place like home...
ing up with all of my questions- this is easily the
longest (and possibly the dumbest) help request email I've ever sent. :)
My sincerest thanks in advance-
Luis
P.S. In case it matters, I generally run potato, and my dselect version
is 1.4.1.1.
P.P.S. In case
ls for libXpm.so.0, which is present, but
which it can't find. If anyone knows a solution to this, I'd be happy to
hear it- it really solved a lot of my office-related problems when I was
running RedHat.
-Luis
###
merely bring up another server. Kill XDM first, and then you'll have a
fully functional text-mode box to play with your Xconfig files in.
-Luis
On Mon, 12 Apr 1999, Jens B. Jorgensen wrote:
>
> You don't need to reinstall. You system hangs because xdm is being run as
> part of th
or my Company.
--
/\
/ \/\ _Andre Luis Cardoso[EMAIL PROTECTED]
/\ \ \ Akros S/A Joinville, SC, BRAZIL
/ \ \ \ Support Analyst Fone: +5547 461-7102
/\ \ \ Linux User 89701 Fax: +5547 461-7070
--
or my Company.
--
/\
/ \/\ _Andre Luis Cardoso[EMAIL PROTECTED]
/\ \ \ Akros S/A Joinville, SC, BRAZIL
/ \ \ \ Support Analyst Fone: +5547 461-7102
/\ \ \ Linux User 89701 Fax: +5547 461-7070
--
Hello, I write from Spain and I'm novice in Linux World.
I have a problem processing .tar file. When I write command "tar
xvf .tar" to extract the file qt-1_42_tar.tar, then computer
return then next error message:
tar: Hmm, this doesn`t look like a tar file
tar: Skipping
Hello, I write from Spain and I'm novice in Linux World.
I have a problem processing .tar file. When I write command "tar
xvf .tar" to extract the file qt-1_42_tar.tar, then computer
return then next error message:
tar: Hmm, this doesn`t look like a tar file
tar: Skipping
> >stable desktop environment, and I do not wish spend hours
>> >editing config files and chmod-ing etc to make it work.
>> >
>> >Can anyone help me?
>> >
>> >Thank you
>> >Luis Cabral
>>
>> 200 MB is awfully small to run mo
softwares (downloaded from the net)
with similar results.
You see, I wish use linux not for hacking, but as a
stable desktop environment, and I do not wish spend hours
editing config files and chmod-ing etc to make it work.
Can anyone help me?
Thank you
Luis Cabral
Hi to all.
On Wed, 2 Sep 1998, Matt McLean wrote:
> change the -ltermcap to -lncurses. AFAIK, debian doesn't use termcap
> anymore.
And why is that?
Regards,
Luis Sismeiro
--
luis.sismeiro(at)@mail.telepac.pt
http://www.nca.pt/individua
n't remove the modules from
within the installation procedure but you can as Alex explains, just edit the
modules file. You want to edit /target/etc/modules though, which is the one
that will be used by the system itself after rebooting.
> Alex Y.
Luis.
--
Luis Francisco Gonzalez &l
possible at least in the proper configuration steps rather than
the extract base/kernel steps. In fact even in those, I can't, off the top of
my head remember any problem either but I am not so sure. Please try and see
if you fail. If so, report it.
Luis.
--
Luis Francisco Gonzalez <[E
quot;Asterix", the french comic, then it conveys the idea of power.
Luis.
---
Luis Francisco Gonzalez <[EMAIL PROTECTED]>
PGP Fingerprint = F8 B1 13 DE 22 22 94 A1 14 BE 95 8E 49 39 78 76
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Maybe netstd?
bash-2.01$ dpkg -S tracer*
scotty: /usr/doc/examples/scotty/traceroute.1
netstd: /usr/doc/netstd/examples/traceroute/mean.awk
scotty: /usr/doc/examples/scotty/traceroute
netstd: /usr/sbin/traceroute
netstd: /usr/doc/netstd/examples/traceroute/README.awk
netstd: /usr/doc/netstd/exampl
e.
> run-parts: /etc/cron.daily/wn exited with return code 2
Any pointers?
Thanks,
Luis.
--
Luis Francisco Gonzalez <[EMAIL PROTECTED]>
PGP Fingerprint = F8 B1 13 DE 22 22 94 A1 14 BE 95 8E 49 39 78 76
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe&quo
@[EMAIL PROTECTED]@1
[EMAIL PROTECTED]@1.1
[EMAIL PROTECTED]@1.2
...
AFAIK, there should be no "^@" in the output but spaces.
This works OK. with the old
gcc.
Thanks,
Luis.
--
Luis Francisco Gonzalez <[EMAIL PROTECTED]>
PGP Fingerprint = F8 B1 13 DE 22 22 94 A1 14 BE 95 8E 49 39 78
Hi,
is there such a thing in Debian (Linux awaiting packaging)?
Luis.
--
Luis Francisco Gonzalez <[EMAIL PROTECTED]>
PGP Fingerprint = F8 B1 13 DE 22 22 94 A1 14 BE 95 8E 49 39 78 76
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED
When I try to install Debian, my computer blocks on the "Checking 386/87
coupling". I waited a lot and nothing, i think is of my Vesa Local Bus,
i have a 486 DX2 at 66Mhz, 16 Mb of Ram, and two Seagates (ST-3600A and
ST-3630A).
In a friend of mine house i installed the debian ok, but in my house
Hi,
I was wondering if there is a C++ Garbage Collector in debian (or linux).
Thanks,
Luis.
--
Luis Francisco Gonzalez <[EMAIL PROTECTED]>
PGP Fingerprint = F8 B1 13 DE 22 22 94 A1 14 BE 95 8E 49 39 78 76
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe
Hi,
I am interested in knowing if there is some way of finding out the memory
being used by a process. Currently I am opening /proc/ppi/mem but the info
there is only in K. Is there a "raw" way of accessing that info using some
kernel interface?
Thanks,
Luis.
--
Luis Francisco Gonzal
Hi,
I was wondering if someone can give me any pointers as to how to set up a
Debian host to act as a server for an NCD X-Terminal that boots through TFTP.
Thanks,
Luis
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail
Hi,
my hard disk is getting too small (or rather debian is growing...) and it's
time to get a new SCSI disk. Could people share with me their experiences as
to what disks were reliable and fast?
TIA,
Luis.
--
Luis Francisco Gonzalez <[EMAIL PROTECTED]>
PGP Fingerprint = F8 B1 13 DE
--- Begin Message ---
By the way, there is something wrong with your mailer as replying to you doesn't
work.
Luis.
--
Luis Francisco Gonzalez <[EMAIL PROTECTED]>
PGP Fingerprint = F8 B1 13 DE 22 22 94 A1 14 BE 95 8E 49 39 78 76
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-ma
601 - 700 of 748 matches
Mail list logo