Perfect! Then I just need to add an alias to my profile and can use nslookup :-)
On 21.10.23 17:58, David Wright wrote:
On Sat 21 Oct 2023 at 17:35:21 (+0200), Reiner Buehl wrote:
> is there a DNS lookup command that is installed by default on any
> Debian Bullseye or Bookworm i
Hi all,
is there a DNS lookup command that is installed by default on any Debian
Bullseye or Bookworm install? Something that doesn't require as much
dependencies as bind9-utils (which provides dig and nslookup) or bind9-host?
Best regards,
Reiner
Hi,
I am trying to setup lm_sensors for an older Zotac IONITX-U-E mainboard.
The values I get from the w83667hg-isa-0a10 are all looking good and are in
line with what I see in the BIOS. But the values I get from
coretemp-isa- are way off. They are around +9/+10°C for both cores
while the
On 27.03.2022 18:12, Nicholas Geovanis wrote:
On Sun, Mar 27, 2022, 7:31 AM Reiner Buehl wrote:
Hi all!
I am trying to build an amd64 Debian package from sources but the
command dpkg-buildpackage -us -uc fails with a number of the
following
error messages:
ERROR
Hi all!
I am trying to build an amd64 Debian package from sources but the
command dpkg-buildpackage -us -uc fails with a number of the following
error messages:
ERROR: ld.so: object 'libfakeroot-sysv.so' from LD_PRELOAD cannot be
preloaded (wrong ELF class: ELFCLASS64): ignored.
I have
It seems that the command /sbin/lvm pvscan --cache --activate ay 9:0 from
the Systemd unit lvm2-pvscan@9:0.service is hanging and blocks all
subsequent lvm activities.
Am Fr., 25. März 2022 um 20:40 Uhr schrieb Reiner Buehl <
reiner.bu...@gmail.com>:
> Hi all,
>
> I am crossgr
Hi all,
I am crossgrading my Debian Buster system from i386 to amd64 following the
guide from the Debian Wiki (https://wiki.debian.org/CrossGrading). After
the apt full-upgrade I rebooted but now my LVM volumes are not activated
again.
The LVM event activation by systemd times out after 90s. I
On 04.10.2021 03:41, Joe Pfeiffer wrote:
That's not it then... googling "md127" I found a *bunch* of possible
causes.
I tried already updating the name attribute, setting the homehost to
none and a few others. Unfortunately none helped.
On 02.10.2021 01:32, Joe Pfeiffer wrote:
Is it possible you need to update your init ramdisk? Maybe your changes
to your mdadm.conf aren't being seen?
I do run update-initramfs -u after each change. Shouldn't that be enough
to to update the mdadm.conf in the init ramdisk?
On 01.10.2021 16:11, Felix Miata wrote:
Mine (old) is like so:
# head -n3 /etc/mdadm.conf
HOMEHOST
DEVICE containers partitions
ARRAY /dev/md0 metadata=1.0 name=msi85:0tmp UUID=...
I tried changing the HOMEHOST from to but that did not
help.
On 01.10.2021 15:50, Linux-Fan wrote:
I have observed this in the past, too and do not know how to "fix" it.
Why is it necessary for the volume to appear under /dev/md3? Might it
be possible to use its UUID instead, i.e. check the output of
ls -l /dev/disk/by-uuid
to find out if your
I created a new mdadm RAID 1 as /dev/md3. But after each reboot, it gets
activated as md127. How can I fix this - preferably without haveing to
delete the whole array again...
The array is defined like this in /etc/mdadm:
ARRAY /dev/md3 metadata=1.2 level=raid1 num-devices=1
/ and /home are fine on the system. The data on the affected filesystem is
a collection of data from different remote sites, so it could be restored
but that would take a lot of time. That's why I would like to fix the
filesystem so that I can then use more intelligent recovery methods that do
not
schrieb Thomas Schmitt :
> Hi,
>
> Reiner Buehl wrote:
> > Is there a quick way to enlarge the swap space
>
> According to old memories of mine you may create a large, non-sparse file
> as you would do for a virtual disk. E.g. by mkfile (which seems not to be
> in Debian) o
Hi all,
I have a corrupt EXT4 filesystem where fsck.ext4 fails with the error
message:
Error storing directory block information (inode=366740508, block=0,
num=406081): Memory allocation failed
/dev/vg_data/lv_mpg: * FILE SYSTEM WAS MODIFIED *
e2fsck: aborted
/dev/vg_data/lv_mpg: *
,
> code=exited, status=32/n/a
> Jul 02 19:26:02 vdr systemd[1]: video.mount: Failed with result
> 'exit-code'.
> Jul 02 19:26:02 vdr systemd[1]: Failed to mount /video.
>
> Best regards,
> Reiner
>
> Am Fr., 2. Juli 2021 um 19:15 Uhr schrieb Reco :
>
>> Hi.
&
exited,
code=exited, status=32/n/a
Jul 02 19:26:02 vdr systemd[1]: video.mount: Failed with result 'exit-code'.
Jul 02 19:26:02 vdr systemd[1]: Failed to mount /video.
Best regards,
Reiner
Am Fr., 2. Juli 2021 um 19:15 Uhr schrieb Reco :
> Hi.
>
> On Fri, Jul 02, 2021 at 06:12:5
Hi all,
I have a directory that is mounted via NFS from a remote server. The mount
is done via an /etc/fstab entry like this:
192.168.1.2:/video /video nfs
That seems perfect. Many thanks!
Am Fr., 4. Juni 2021 um 15:10 Uhr schrieb Dan Ritter :
> Reiner Buehl wrote:
> > Hello all,
> >
> > I have setup mdadm to email me when disks in one of my RAID arrays fail.
> > Unfortunately the email messages only contain the device as
Hello all,
I have setup mdadm to email me when disks in one of my RAID arrays fail.
Unfortunately the email messages only contain the device as /dev/sdb1 which
does not give any hint which of the four identical disks in the array is
the affected one.
As /dev/sdb1 is only a symbolic link to a
Hi all,
after upgrading from Debian Stretch (cacti 0.8.x) to Buster (cacti 1.2.x),
I can't access the cacti web ui anymore. I only get a message "System log
file is not available for writing, please enable write access Log:
/usr/share/cacti/site/log/cacti.log" in the browser.
Am I missing some
key "cdrom" not found in map
source(s).
Jul 7 18:23:37 bilbo automount[31697]: key "cdrom" not found in map
source(s).
Best regards,
Reiner
Am Mo., 6. Juli 2020 um 08:05 Uhr schrieb Andrei POPESCU <
andreimpope...@gmail.com>:
> On Lu, 06 iul 20, 07:49:09
Hello,
I keep getting messages from syslog "key "cdrom" not found in map
source(s)." on the console of my Debian Stretch system but I don't even
have a cd rom installed in this system.
I already checked /etc/fstab, /etc/samba/smb.conf, /etc/autofs.conf and all
the /etc/auto.* files as this
Many thanks, Floris! With your expression I now see the other options:
bilbo:~# awk -F"'" '/menuentry/ {print $2}' /boot/grub/grub.cfg
Debian GNU/Linux
Advanced options for Debian GNU/Linux
Debian GNU/Linux, with Linux 4.9.0-7-686-pae
Debian GNU/Linux, with Linux 4.9.0-7-686-pae (sysvinit)
On 10.12.2010 21:15, David Gaudine wrote:
The system works, but I still have some questions about whether what
I've already done is OK.
1) Is it OK to use 4 MD arrays like this, or should I use just one and
LVM like the jerryweb link? I got a bit confused reading about LVM
and I don't need
ideas how I can fix this?
Regards,
Reiner Buehl.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/4cfa3a84.2070...@buehl.net
Hi all,
I have a Debian Etch system that runs on a RAID 1 software raid system.
now I would like to upgrade it to Lenny by splitting the mirror off and
keep one mirror as a backup. Alternatively I could add a third disk as a
second mirror and split off this one.
If the upgrade works, I then
Antworten. Denn laut Andreas setzt Outlook dann doch die Header. Das
wundert mich zwar etwas, aber da ich es nicht überprüft habe, glaube ich
das
jetzt einfach mal.
Ich denke ein Allen-Antworten müsste in Outlook richtik sein, da bei
einem einfachen Antworten die Mail an den Orginal-Poster
Hallo Ulrich,
Nach dem starten funktionierte das ganze auch für ca. 1 Stunde.
danach ist zwar noch der Prozess vorhanden
root 3686 0.0 0.2 4200 1204 ?Ss 12:21 0:00 /bin/sh
-c tail -f /var/log/mail/procmail.log | egrep 'Folder| Subject:|Match'
/var/log/ma[...]
Kann es
://www.de.debian.org/debian-user-german-FAQ/
Zum AUSTRAGEN schicken Sie eine Mail an
[EMAIL PROTECTED]
mit dem Subject unsubscribe. Probleme? Mail an
[EMAIL PROTECTED] (engl)
--
.._/.
Reiner Buehl
)
--
.._/.
Reiner Buehl_/
Hewlett-Packard GmbH _/_/_/_/ _/_/_/_/
Consulting Integration _/_/ _/_/
Mailstop ESD1_/_/ _/_/ Mail: [EMAIL PROTECTED]
71034 Boeblingen_/_/ _/_/_/_/ Phone: (+49) 7031 14-6701
Dies tritt immer dann auf, wenn die Verbindung zum Internet kurz weg ist.
Das ist ein bekanntes Problem des ntpd für das es meines Wissens nach (noch)
keine Lösung gibt. Der ntpd macht, wenn das Interface kurz weg war keinen
Reconnect mehr sondern hängt nur noch rum. Eine Möglichkeit dies zu
Hallo,
mit dem Sid 2.6.11 Kernel Paket funktioniert bei meinem Sarge System meine
Tastatur nicht mehr! Am LILO-Prompt funktioniert die Tastatur noch, das
System fährt normal hoch, akzeptiert dann aber am Login-Prompt keine
Tastatur-Eingaben mehr. Einfügen von Text per Maus über gpm funktioniert,
Hallo,
hast Du mal geschaut, was pppoe -I eth0 -A zurückliefert?
Das sollte Dir die MAC Adresse und den Namen des Access
Concentrators liefern.
Schau auch mal, ob nicht vielleicht ein übereifriges Konfigurations-
Script dem Netzwerk-Interface eine IP-Adresse verpasst hat oder
versucht sich eine
PS Die config des 2.4.30 mit Modul unterstützung habe ich
übernommen nur
eben dann die Unterstützung deaktiviert.
Kann es sein, das dabei irgendwelche Treiber für Netzwerk-Protokolle
nicht übernommen worden sind? Oder Firewall-Module, oder ... ich denke
ohne nähere Angabe zu Deiner
35 matches
Mail list logo
