Hi,
I dont know whether this is an appropriate forum to open this thread. I am an ardent admirer of linux and debian in particular. Earlier I used to work on FC 1, recently I swithced to debian. God, it is loads of fun. I am working for a major software company in India. But whenever I talk
abc.torrent
it starts allright but after 20 or 30 % the download stops. curiously it starts uploading and the process hangs at that stage. Any clues
Shatam bhattacharya
Hi list,
I am facing problems installing my HP printer (make 3325 inkjet). I have done the following -
[EMAIL PROTECTED] apt-get install hplip
Added a printer on the web based interface at http://localhost:631/
Stopped and restarted cupsd.
lspci does not show a usb printer. The dmesg has some
On Fri, 27 May 2005 Ionut Georgescu wrote :
Hello Shatam,
This is not an error. It is a warning. And an advice. You have never
used kernels with initrd images before, so your system has to be
configured. Do what it says. Create /etc/kernel-img.conf and write the
following line
do_initrd =
Congratulations!!
It may be that your driver is not loaded upon boot. And if it is not
loaded, /etc/init.d/network has nothing to configure. Reason ? with
2.4.18 8139too might have been already compiled into the kernel, with
2.4.27 it is definitely a module.
A quick way to check it: load
Now back to the thread: what is the output of lsmod after installing the
new kernel ? It would be nice if you also attached a dmesg.
It still displays the same error messege.
ginie:# apt-get install kernel-image-2.4.27-2-686
Reading Package Lists... Done
Building Dependency Tree... Done
The
the null device.
Please tell me, where I may be going wrong,
Thanks
shatam bhattacharya
Ok guys,
I got your point. I hope you all would overlook this mistake as a first timer. I will take care of the points that have been told to me.
please help me out with my new thread regarding alsa
Bye
/dsp): No such device
Any clues ??
Thanks
Bbye
Shatam Bhattacharya
New Delhi,
India
Please post the output of lspci and uname -a and groups.
ginie:/etc/modutils# lspci
:00:00.0 Host bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
:00:02.0 VGA compatible controller: Intel Corp. 82845G/GL[Brookdale-G]/GE Chipset Integrated
On Thu, 26 May 2005 Ionut Georgescu wrote :
I think you don't have the alsa kernel modules installed. There are none
for your kernel, so I think you should upgrade:
apt-get install kernel-image-2.4.27-2-k7 alsa-modules-2.4.27-2-k7
When I try to upgrade it gives the following error -
... guess you installed your kernel-headers and alsa-utils as well? with alsaconf you should be able to install your soundmodule. *not* with modconf in this case..
alsaconf loads no drivers, does not detect any PnP or pci cards, neither it detects any legacy drivers!!!
Any clues
Shatam
I wonder if that blank search line is causing problems.
Also, is 192.168.1.1 a real DNS server? I suspect that is pointing to
your router, and I suspect it should be pointing to your ISP's DNS
server(s). That might be configurable in your router's web interface, or
you can just change your
But as mentioned, I'm unclear on what you're seeing, so something odd
may be happening. You should just be able to:
Very true. It just needed a apt-get -f install. Everything (except low quality graphics and unavailable sound), is working fine. I m lovin' it!!! Trying to update xfree86 to 4.3; Is
deb http://security.debian.org stable/updates main contrib non-free
0% [Connecting to security.debian.org (1.0.0.0)]
See if this has any relevance (be sure to let us know).
http://www.mepis.org/node/6516
My DSL router has a web based configuration. The DNS tab has the following options --
1)
On Fri, 20 May 2005 Kent West wrote :
shatam bhattacharya wrote:
deb http://security.debian.org stable/updates main contrib non-free
0% [Connecting to security.debian.org (1.0.0.0)]
My DSL router has a web based configuration. The DNS tab has the
following options --
1) Use
On Fri, 20 May 2005 Kent West wrote :
shatam bhattacharya wrote:
# The first network card - this entry was created during the Debian
installationauto eth0
iface eth0 inet dhcp
If the auto eth0 really is not on its own line, it needs to be.
Otherwise, that looks okay.
Please give
2) I still cant apt-get update (the same problem i.e. (1.0.0.0) hang persists.)
... if I remember rightly, you recently posted your dmesg output
which showed your single ethernet card being recognized twice - as
eth0 (associated with the via Rhine driver) and eth1 (associated
with the 8139too
On Thu, 19 May 2005 Kent West wrote :
shatam bhattacharya wrote:
2) I still cant apt-get update (the same problem i.e. (1.0.0.0)
hang persists.)
the sources.list is
deb http://security.debian.org/ stable/updates main
Notice mine does not have a slash after .org. Perhaps it'll
:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:388 errors:0 dropped:0 overruns:0 frame:0
TX packets:388 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:19848 (19.3 KiB) TX bytes:19848 (19.3 KiB)
Please help
Shatam
RTL8139 Fast Ethernet board found at 0xd004cc00, IRQ 9
eth1: Chip is 'RTL-8139C' - MAC address '00:08:a1:32:e1:7e'.
NTFS version 000607
Any clues
bbye
Shatam Bhattacharya
New Delhi,
India
Ethernet driver 0.9.18-pre4 Jeff Garzik [EMAIL PROTECTED]
eth1: Linux-2.2 bug reports to Jens David [EMAIL PROTECTED]
eth1: RealTek RTL8139 Fast Ethernet board found at 0xd004cc00, IRQ 9
eth1: Chip is 'RTL-8139C' - MAC address '00:08:a1:32:e1:7e'.
NTFS version 000607
Any clues
bye
Shatam
.
Bye
Shatam Bhattacharya
New Delhi,
India
.
Bye
Shatam Bhattacharya
New Delhi,
India
and drm for intel 82845 GL borad as right now I dont have X installed on my system.
Please help.
shatam
Shatam Bhattacharya
New Delhi,
India
On Sun, 15 May 2005 Kent West wrote :
shatam bhattacharya wrote:
I am having trouble in configuring X on my system. I am using the
following configuration
-Intel 82845 GL motherboard
uname -r says
2.2.20-idepci
XFree86 Version 4.1.0.1 / X Window System
(protocol
password: NO)
GRANT ALL PRIVILEGES ON YourDB.*
TO stan@'%';
flush priviledges;
By the way, its better to keep a host, user and database access level ACL
Cheers
Shatam Bhattacharya
New Delhi,
India
On Sun, 15 May 2005 Kent West wrote :
shatam bhattacharya wrote:
On Sun, 15 May 2005 Kent West wrote :
shatam bhattacharya wrote:
I am having trouble in configuring X on my system.
I highly recommend you upgrade to Testing or Sid
As advised by you I am currently
-upgrade as mentioned above, you can
easily get a pre-built 2.4 kernel with apt-cache search
kernel-image-2.4 to see which versions are available, then apt-get
install kernel-image-2-4whatever version you need.
I am on XP right now as the X output is terrible.
plz help
Shatam Bhattacharya
New Delhi
-upgrade as mentioned above, you can
easily get a pre-built 2.4 kernel with apt-cache search
kernel-image-2.4 to see which versions are available, then apt-get
install kernel-image-2-4whatever version you need.
I am on XP right now as the X output is terrible.
plz help
Shatam Bhattacharya
New Delhi
:0
collisions:0 txqueuelen:0
RX bytes:1648 (1.6 KiB) TX bytes:1648 (1.6 KiB)
Any Clues. bbye
Shatam Bhattacharya
New Delhi,
India
uname -r says
2.2.20-idepci
XFree86 -version says -
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
Shatam Bhattacharya
New Delhi,
India
Hi,
should I burn the .tmp file if some decumentation files are missing in the downloaded packages. I am using jigdo to burn CDs for woody 3.0r1.
great times,
shatam
Yahoo! India Matrimony: Find your partner online.
Post your profile.
33 matches
Mail list logo
