Thanks a ton!
I'm running this container on my private network behind a NAT, so I'm
not too worried about disabling apparmor. I ended up just giving as
loose of a configuration I could and it did the trick.
lxc.apparmor.profile = unconfined
lxc.apparmor.allow_nesting = 1
I have a LXC container which is connected to a remote VPN using OpenVPN.
After upgrading to buster, the VPN does not start anymore.
I'm using Debian buster on my host OS and Debian buster on the guest OS.
Both were updated from stretch. Aside from OpenVPN there's only deluged
and deluge-web
Hans wrote:
I just wanted to show ways, where EVERYONE might be happy
Sure. Sure. Everybody who has invested years into learning
Debian is just jumping of joy now that it is suddenly turned
into a completely different OS _and_ they have to find another
Unix _and_ learn it almost from scratch
Didier 'OdyX' Raboud wrote:
Blaming the Debian project for letting the Debian distribution evolve in
ways defined by its volunteers is unfair.
Blaming? Did I say a word about Stable becoming less and less
stable since about Etch? No. Did I mention that I had to get
almost all essential
Hans wrote:
And at the beginning things never work perfect
That's why they shouldn't make it into Stable as defaults,
now should they?
--
Best nightdreams.
Serge Tiunov, Do you really think you think
http://e-head.net when you do think you
Hey, folks,
Has anybody else get a bunch of 404 File Not Found trying to put
together 7.7's install DVDs for amd64 and i386? And if so, have
you found a workaround?
--
Best nightdreams.
Serge Tiunov, Do you really think you think
http://e-head.net
Steve McIntyre wrote:
Has anybody else get a bunch of 404 File Not Found trying to put
together 7.7's install DVDs for amd64 and i386? And if so, have
you found a workaround?
As far as I know it *should* be working. What mirror are you using?
Yes, always Just Worked™ for me.
First, jigdo
Hi,
I use debian stable (wheezy) on my amd-64 laptop. Somewhere over the last weeks
my iceweasel stopped playing mp4 videos.
I get the error message Video can't be played because the file is corrupt.
iceweasel was playing the same video file perfectly fine a few weeks ago. I
haven't changed
I don't see that report
I'm using iceweasel from experimental on a testing machine.
Thanks Brad for giving it a try.
I think this confirms that the problem only affects stable (wheezy).
As a side note, the video runs fine on Internet Explorer and on Android.
Thanks again for giving it a try,
goli...@riseup.net wrote:
Just in case you haven't seen this elsewhere:
http://debianfork.org/
Thanks a lot, first time I knew I'm not the only long-bearded SA
with an attitude.
All y'all going to fork, I salute you.
--
Best nightdreams.
Serge Tiunov, Do you
lee wrote:
Shall we have a vote?
That's hardly necessary, seeing as how Debian developers have
been disregarding their users' needs in the last few years.
Vote all you want, of course, but it's obviously Shuttleworth and
Pöttering, or maybe Microsoft or Satan Beelzebub behind them both
who's
st wrote:
Somehow, creating and adding a disk manually gives 1 PE less:
And I think I've found where the disk space went to.
root@hulk:~# pvck /dev/sdb1
Found label on /dev/sdb1, sector 1, type=LVM2 001
Found text metadata area: offset=4096, size=195584
root@hulk:~# pvck /dev/sde
Found
So there's an LVM volume consisting of 3 disks that was created
by the Debian Installer. One of the disks develops problems
(offline uncorrectable sectors) so I buy a fourth, the same size
exactly. Now, I pvcreate /dev/sde, and I vgextend bigstore /dev/sde,
and I try to pvmove /dev/sdb1. Doesn't
Nuno Magalhães wrote:
Does pvcreate imply pvscan? I.e. is LVM aware of the new pv so you can
move onto it?
It becomes aware when the PV is added to VG. That's also when pvdisplay
starts showing how many extents LVM thinks the volume's got so I have
to do it anyway.
LVM doesn't start moving
Roman Gelfand wrote:
I am running wheezy with postfix mail server. It appears that ll
system emails are going to r...@domain.com. I don't remember if I set
it up when installing os or when installing postfix.
How can I change this address from root@domain to some other email address?
Edit
Anubhav Yadav wrote:
Hello everyone, this is my first post here.
I am facing lot of problems in installing wheezy.
1) I downloaded the dvd-1 image of amd-64 precisely debian-7.1.0-amd64-DVD-1
for installing wheezy. I checked the md5sum of my downloaded file and it was
the same as of the
Ethan Rosenberg, PhD wrote:
I formatted a usb stick on my desktop into two partitions, vfat and ext2 and
then setup a directory structure in the Linux partition. I then moved the usb
stick to my laptop and inserted files into the directories that were created.
When I moved the sub stick back
Paul Lewis wrote:
However for this scanner SANE stipulates 1.0.62 backend but it seems
squeeze has 1.0.61 bundled is there an apt repository that provides
1.0.62 or .63?
Back in the day, I had to install SANE from backports for LiDE 110
to work.
--
Best nightdreams.
Serge Tiunov,
Anthony Campbell wrote:
I'm trying to buy a black and white laser printer for a family member
running Wheezy. Can anybody recommend one that you've purchased recently,
which used native cups drivers available in Wheezy, which cost $100US or
less?
Brother HL-2132. Cartridges don't last long,
Kent West wrote:
Sir full installation dvd's(a set of 10) are not released yet so kindly
specify when these are going to be released.
I'm not sure where you get the idea that there are 10 DVDs
Here, maybe:
http://cdimage.debian.org/debian-cd/7.0.0/i386/jigdo-dvd/
As you may see,
Rob Owens wrote:
I'm trying to buy a black and white laser printer for a family member
running Wheezy. Can anybody recommend one that you've purchased recently,
which used native cups drivers available in Wheezy, which cost $100US or
less?
Brother HL-2132. Cartridges don't last long, but
Bob Proulx wrote:
One simple question, though: if you have 2 similar HDDs and one
of them starts to fail, how do you know which one it is?
I assume you mean which physical disk is which?
There are useful tools hdparm, smartctl, blkid, lsblk and probably
others too.
# hdparm -I /dev/sda
Stefan Monnier wrote:
I see many people suggested UUIDs and other funny long names.
What I use instead: LVM. This way you get to name the disks and
partitions with meaningful names which only change when you decide to
change them.
One simple question, though: if you have 2 similar HDDs and
Sir,
*Sub : Installing Debian 5 Lenny 64bit from DVD - Problem*
I downloaded *DVD version of Debian 5 Linux 64bit (IA) from your site
( 2 ISO images)*, I tried to install it on my* Intel Core2 Duo* machine.
while trying to boot form the DVD ROM, No boot screen for Debian, a cursor
is
Le 02 septembre 2008 18:28, [EMAIL PROTECTED] a écrit :
J'ai trouv� ce tuto (�tant donn� que j'utilise postfix):
[1]http://www.thecabal.org/~devin/postfix/smtp-auth.txt
Je voulais avoir votre avis � ce sujet avant de me lancer dans la chose.
Mes questions sont les suivantes:
Bonjour,
Jai un petit
soucis avec un serveur web.
Jai installer
apache 2 et htDig pour le système dindexation.
Lorsque je lance
une recherche le serveur me renvoie une erreur: Internal Server Error
(500).
Jai bien regardé
du côté de htDig pas de problème. De plus, si on lance htsearch
ilgi alaka için saolun. verdiðiniz adreslere bakacamve çözüm yollarýný deyecem. debianý kaldýrmýþtým þimdi tekrar kurucam. bu sefer üstesinden gelicem umarým bakacaz artýk :)
Do you Yahoo!?
Check out the new Yahoo! Front Page. www.yahoo.com
merhaba
Do you Yahoo!?
Check out the new Yahoo! Front Page. www.yahoo.com
merhaba diye kýsacýk mesaj attým gruba yolladým biraz
uzun yazýyorum mesaj gitmiyor sýyýrdým kafayý yaa..
__
Do you Yahoo!?
Check out the new Yahoo! Front Page.
www.yahoo.com
bana neden debian kullanmalýyým biraz izah
edermisiniz? bir süredir linux kullanýyýrum redhat
fedora mandrake denediðim sürümler...
bir kaç debian maceram oldu. önce sid kurdum ama
sesle xmms ile sorun yaþadým. ayrýca windowsuda
göremedim default olarak. ha birde cdrom ile sorun
yaþadým. cdyi
az onceki yazýyý daha önce kedit ile yazmýþtým. oradan
kopyalayýp yollamak istedim iki gündür uðraþýyorum
yollayamadým failure to delivery hatasý yedim sürekli.
þimdi elle yazdým tekrardan gitti. yok böyle bir olay
ya... fonttan falan mý kaynaklandý artýk ne oldu
anlamadým ama birþey olduðu kesin
Hello,
My remote server is down right now and I think it is
because of the kernel-image update from
security.debian.org. I've been running woody for about
a year and the machine has been up and going and I've
updated the kernel-image.
Then the machine rebooted itself and it has come up
with a
Title: Re: Debian und 160GB HDD
Mit freundlichen Grüßen
Antonino Bachert
ST-CC/TEF2 | Call Handling System
E-Mail : [EMAIL PROTECTED]
Telefon : +49 69 75 62 -15 30
Fax : +49 69 95 40 - 29 93 23
***
Bosch Sicherheitssysteme GmbH
Bosch Communication Center
-5 serial
alias char-major-6 lp
alias char-major-9 st
alias char-major-10 off
alias char-major-10-0 busmouse
alias char-major-10-1 off
alias char-major-10-2 msbusmouse
alias char-major-10-3 atixlmouse
alias char-major-10-130 wdt
alias char-major-10-131 wdt
alias char-major-10-135 rtc
alias char-major
Bon cette fois-ci je l'ai mit en 100mb...aucun changement. LE nouveau dmesg en
attaché.
Merci,
David.Linux version 2.4.18-bf2.4 ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002
(Debian prerelease)) #1 Son Apr 14 09:53:28 CEST 2002
BIOS-provided physical RAM map:
BIOS-e820: -
Mon serveur X ne fonctionnait pas, j'ai tenté de le reconfigurer, mais toutes
les infos qu'il me demande je croyais qu'il était apte a les déterminés lui-
même...enfin j'ai obtenu avec lspci l'info qu'il me manquait, mais le xserver
ne veut toujours pas fonctionner. Il me dit:
- Message transféré de David St-Onge [EMAIL PROTECTED] -
Date : Thu, 17 Jun 2004 14:51:11 -0400
De : David St-Onge [EMAIL PROTECTED]
Adresse de retour :David St-Onge [EMAIL PROTECTED]
Sujet : Re: Xserver
À : [EMAIL PROTECTED]
Bon...voici les derniers essais
Avec
Héh...bon c'est un peu ridicule, mais effectivement j'avais omis le package x-
window-server...malheureusement le problème ne semble pas seulement là.
Quel windows manager que tu
utilises (icewm, xfce, gnome, kde, fwm2?
gdm
et l'erreur est:
addScreen/ScreenInit failed to driver for 0.
Bon en fouillant un peu plus, voici d'autre message d'erreurs:
En lancant XFree86 -xf86config /.../XF86Config.new (toujours bien éditée...)
et en stoppan tlorsque ca gèle j'obtient:
%PEXExtensionInit: Couldn't open default PEX font file Roman_M
%...
%Could not init path element
Désolé...je me suis gourré de nom effectivement...j'ai kde d'installer...mais
je vais quand même essayer avec icewm,
merci,
DAvid
Alors, je te suggere, si tu veux utiliser un windows manager leger:
apt-get install icewm
Avec un fichier ~/.xinitrc
exec icewm
Fonctionne pas non plus, même message. (le fichier .xinitrc doit être dans le
dossier root ou dans / ? - j'ai essayer les 2)
David
Title: Message
Bien le bonjour! Je
suis nouveau dans l'univers debian et après avoir terminer mon installation sans
message d'erreur, je me rends compte que mon réseau ne fonctionne pas! Le driver
a pourtant bien loader et je suis certain qu'il est bon, j'ai entré toute les
bonnes info (ip
Title: Brauch Postfix Hilfe
Hallo Liste,
Weis keiner was ich falsch gemacht habe?
Ich bekomme einfach keine Antwort. Dieser Fehler kann doch nicht das erste mal bei mir aufgetreten sein
ich wollte mir einen Mail Server nach dem postfix-cyrus-web-cyradm-howto Revision
Title: Postfix Probleme
Hallo Liste,
ich wollte mir einen Mail Server nach dem postfix-cyrus-web-cyradm-howto Revision 1.2.3 20030324
aufsetzen. Bis zur Installation von Postfix selber lief auch alles ganz gut. Dann wollte ich Postfix wie folgt installieren.
tar xvzf postfix2.0.7.tar.gz
Bonjour a tous,
je cherche desesperement a passer des options de compilations qui vont bien
tout en gardant le systeme de paquets par dpkg... je ne veux pas installer
de tarballs :)
y'a t il une possibilité de passer des options au ./configure a l'interieur
du .deb ? j'ai essayé de faire un
j'ai essayé de faire un apt-get source et de modifier le fichier
rules pour rajouter mes options, mais ca deconne assez a l'install...
C'est pourtant la bonne approche (pensez à modifier le numéro de version
ou,
mieux, le nom du paquetage avec les Conflicts, Provides et Replaces, qui
vont
Atention quand tu modifie des options à la compilation d'un paquet, il
faut bien penser aux implications que cela peut avoir sur le reste de la
distrib.
Par exemple sur le user, par default c'est www-data, tout les autres
paquet vont faire en sorte de mettre les bon droits sur leurs fichier.
test
On Sat, 16 Nov 2002 16:26:46 -0700 (MST), you wrote:
HP just kinda sprung to mind as a Debian friendly entity
Oh how I wish that were true! I'd be able to get my HP 3400C scanner
working. If HP were truly Debian (or even just Linux) friendly they'd
provide specs to Bertrik Sikken ([EMAIL
On Sun, 17 Nov 2002 14:17:28 +1100, you wrote:
remove .sig from messages I am replying to
au BufRead /tmp/mutt* normal :g/^| -- $/,/^$/-1dgg
snip
I got that line about
removing the .sig from someone on here, but it doesn't actually seem to
work...
I'm not sure but it looks like you're
Hallo Kamome,
hier die XF86Config:
-
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice"Mouse0" "CorePointer"
InputDevice"Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath
hi my name is simon st-pierre and im not able to
find a patch for quake2 v3.20
and my computer crash over the internet i dont know
if you have a 3dfx patch
for this
please write back
Simon
On Thu, 4 Mar 1999, Nuno Donato wrote:
I really need some help here.
How can I have Linux to mount automatically my hard drives
at boot. Because every time I run Linux, I have to mount all
my partitions into separate directories.
Can I create some type of autoexec file?
PLEASE HELP
--
St. Johns Computer Center
[EMAIL PROTECTED]
How do you view the log of the past logins?
St. Johns Computer Center
[EMAIL PROTECTED]
57 matches
Mail list logo
