Bonjour,
J'ai un énorme problême avec ma carte SCSI (Adaptec AHA-2940) :
- lorsque j'utilisait un noyau 2.2.19 (celui de la potato) ma carte
fonctionnait à merveille !
- maintenant que j'utilise le noyau 2.4.18 ma carte ne fonctionne plus car,
des que j'essaye d'accéder à un disque dur
En réponse à bernard schoenacker [EMAIL PROTECTED]:
Le Samedi 7 Septembre 2002 11:23, Nicolas Massé a écrit :
Bonjour,
J'ai un énorme problême avec ma carte SCSI (Adaptec AHA-2940)
: - lorsque j'utilisait un noyau 2.2.19 (celui de la potato)
ma carte fonctionnait à merveille
Giuliano Cardozo Medalha wrote:
Estou tentando instalar uma placa ADAPTEC SCSI modelo 2940 no meu Debian
Potato
Na inicializacao o sistema reconhece a placa e faz um spinning disk ... apos
isso da um erro de disco
o potato já está instalado??
você recompilou para inserir o módulo
Giuliano Cardozo Medalha wrote:
Sim, eu recompilaei o kernel para esse modulo
A placa e reconhecida perfeitamente, porem o HD nao
algum hd isa na máquina? se tiver, remova. Se não tiver e, durante o
reconhecimento da placa aparecer host found (0), possívelmente hajam
problemas com o
Pessoal,
Estou tentando instalar uma placa ADAPTEC SCSI modelo 2940 no meu Debian
Potato
Na inicializacao o sistema reconhece a placa e faz um spinning disk ... apos
isso da um erro de disco
Alguem que ja instalou essa placa com sucesso poderia me ajudar
Obrigado
Glenn Remstedt wrote:
hi there,
my verry first time to boot up an Debian, with floppies ...
Package: boot-floppies
Version:
ftp://ftp.de.debian.org/pub/debian/dists/slink/main/disks-i386/2.1.12-1999-12-09/
Architecture: i386
memory: 32Mb
scsi: Adaptec AHA-2940/AHA-2940W
During boot
On Wed, 25 Aug 1999, Andrew Hodgson wrote:
I have just tried to install Debian on a machine with an Adaptec AHA 2940
SCSI adapter. When I run install from DOS (or boot from the rescue floppy)
the machine hangs after detecting the SCSI adapter. The last message on
the screen is... Downloading
I had a similar problem with my PII. My solution, though not eloquent, was to
use 2.0 boot, driver and base disks to start the installation. I then had to
upgrade one of the libs before I could then use dselect to install from my 2.1
CD's. dselect will tell you which lib needs updating. You then
I have just tried to install Debian on a machine
with an Adaptec AHA 2940 SCSI adapter. When I run install from DOS (or boot from
the rescue floppy) the machine hangs after detecting the SCSI adapter. The last
message on the screen is... Downloading sequencer instructions... 419
Hi Andrew,
On Wed, Aug 25, 1999 at 01:21:46PM +0100, Andrew Hodgson wrote:
Anyone know if this SCSI adapter works with Debian?
I am using an Adaptec 2940 U2W without any problems. The machine is
running Slink and humming right along.
There are some special 2940-boot disks around, since your
On Wed, 25 Aug 1999, Andrew Hodgson wrote:
[ your line wrap doesn't ]
: I have just tried to install Debian on a machine with an Adaptec AHA 2940
SCSI adapter. When I run install from DOS (or boot from the rescue floppy) the
machine hangs after detecting the SCSI adapter. The last message
Andrew Hodgson wrote:
I have just tried to install Debian on a machine with an Adaptec AHA
2940 SCSI adapter. When I run install from DOS (or boot from the
rescue floppy) the machine hangs after detecting the SCSI adapter. The
last message on the screen is... Downloading sequencer
On Wed, 25 Aug 1999, Andrew Hodgson wrote:
I have just tried to install Debian on a machine with an Adaptec
AHA 2940 SCSI adapter. When I run install from DOS (or boot from
the rescue floppy) the machine hangs after detecting the SCSI
adapter. The last message on the screen is... Downloading
On Wed, Aug 25, 1999 at 01:21:46PM +0100, Andrew Hodgson wrote:
I have just tried to install Debian on a machine with an Adaptec AHA 2940
SCSI adapter. When I run install from DOS (or boot from the rescue floppy)
the machine hangs after detecting the SCSI adapter. The last message
The aic7xxx driver in 2.1.65 crashes my system, too. I have a IWILL P54-TS
motherboard with built-in aic7850. I'll have to try the patch with that.
Thanks
Bruce
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to
Matthew Tebbens [EMAIL PROTECTED] writes:
Yup, found it !
I'm using 2.0.32
I re-compilied the kernel, added support and everything seems to
work just fine. I still have to add my external scsi drives at
a later time I think the following Warning message is related
to that.. ?
Thanks
On Wed, 26 Nov 1997, Matthew Tebbens wrote:
:
: I know Linux supports the 2940, but while re-compiling the
: kernel I don't see anything with '2940'.
:
: Are there any web pages or mailing lists with help/support
: for th Adaptec AHA-2940 ??
:
: Thanks
: Matthew
:
Adaptec controllers
I think the aic7xxx driver in 2.0.32 is very recent. There's is, however,
a patch for it on ftp.dialnet.net in /pub/linux/aic7xxx/2.0.32. I haven't
used it yet, as I don't seem to have problems with the stock 2.0.32 driver.
There is a mailing list but I can't find the address. If you don't
I know Linux supports the 2940, but while re-compiling the
kernel I don't see anything with '2940'.
Are there any web pages or mailing lists with help/support
for th Adaptec AHA-2940 ??
Thanks
Matthew
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED
I know Linux supports the 2940, but while re-compiling the
kernel I don't see anything with '2940'.
Are there any web pages or mailing lists with help/support
for th Adaptec AHA-2940 ??
Thanks
Matthew
Hi.
What kernel are you trying to compile?
If 2.0.29 - then while make menuconfig
supports the 2940, but while re-compiling the
kernel I don't see anything with '2940'.
Are there any web pages or mailing lists with help/support
for th Adaptec AHA-2940 ??
Thanks
Matthew
Hi.
What kernel are you trying to compile?
If 2.0.29 - then while make menuconfig
under
21 matches
Mail list logo
