what entry must be written in interfaces for a usb cable modem, probably
using usb-uhci module? That is, I assume that ethx will not work here.
Thanks to all
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
I just got my Cable modem upgraded from the cable company. It is a
Terayon TJ615 Docsis modem. My configuration hasn't changed from my
older Terayon cable modem. The problem is this, the modem seems to be
constantly receiving something, showing up as about a ~2k download in
my network
On Sat, Nov 02, 2002 at 06:52:52PM -0500, Richard Beri wrote:
...
is when I go to a shell (control-alt-f1) I am getting a constant
stream of messages something starting with IN eth0 OT=MAC ff:ff
In order to quiet on-screen error messages, the first place to check is
/etc/init.d/klogd.
Hola a todos, es la primera vez que entro en esta lista ya que soy novato en
Debia, pero llevo bastante tiempo usando otras distribuciones como Mandrake.
Mi problemas es que tengo una conexión por cable modem de ONO que no consigo
configurar en Debian. Tengo un modem 3Com HomeConnection por USB
El lun, 28-10-2002 a las 12:03, Manuel Yago Oseguera Saura escribió:
Hola a todos, es la primera vez que entro en esta lista ya que soy novato en
Debia, pero llevo bastante tiempo usando otras distribuciones como Mandrake.
Mi problemas es que tengo una conexión por cable modem de ONO que
Nunca me he conectado a internet a través del cable, pero, a lo mejor lo
que te pasa es que no tienes bien configurada la tabla de
encaminamiento, en ella tienes que especificar la dirección del GateWay
por defecto, que te dará acceso a la red.
El comando para verla y modificarla es route.
d Hola a todos, es la primera vez que entro en esta lista ya que soy
novato en
Debia, pero llevo bastante tiempo usando otras distribuciones como
Mandrake.
Mi problemas es que tengo una conexión por cable modem de ONO que no
consigo
configurar en Debian. Tengo un modem 3Com HomeConnection
filtering en la
seccion de networking, y voy a mirar con calma que paquetes tengo unstalados,
¿has probado con el dhcpcd o algo asi?
On Fri, 20 Sep 2002 22:58:48 -0500 (CDT)
Francisco Navarro [EMAIL PROTECTED] wrote:
Hola Lista:
ESpero me puedan ayudar a instalar un surfboard sb4100
cable
paquetes
tengo unstalados, ¿has probado con el dhcpcd o algo asi?
On Fri, 20 Sep 2002 22:58:48 -0500 (CDT)
Francisco Navarro [EMAIL PROTECTED] wrote:
Hola Lista:
ESpero me puedan ayudar a instalar un surfboard sb4100
cable modem, me rechaza la configuracion de DHCP.
Tengo insalado
Hola Lista:
ESpero me puedan ayudar a instalar un surfboard sb4100
cable modem, me rechaza la configuracion de DHCP.
Tengo insalado Woody.
Gracias!
_
Do You Yahoo!?
Información de Estados Unidos y América Latina, en Yahoo! Noticias
Hola Lista:
ESpero me puedan ayudar a instalar un surfboard sb4100
cable modem, me rechaza la configuracion de DHCP.
Tengo insalado Woody.
Gracias!
_
Do You Yahoo!?
Información de Estados Unidos y América Latina, en Yahoo! Noticias
Senhores,
Alguem ja passou pelo seguinte problema? Tenho um modem
3com homeconnect a cabo com interfaces rj45 e usb e gostaria
de faze-lo funcionar com o cabo usb! Ai sobra a interface de rede
do meu micro para compartilhar internet aki em casa sem ter q
comprar um hub! heheheh eh a vida neh?
On Sun, Jul 28, 2002 at 01:32:44PM +0200, 31 wrote:
chaos escribiu:
esquema cableado/tarjetas:
cable-modem
|
|
(cable rj45)
|
|
tarjeta1 equipo1 (esta coje la ip del dhcp del cable-modem)
tarjeta2 equipo1 (ip fija, la que quieras, ej: 192.168.0.1)
|
|
(cable rj45
[EMAIL PROTECTED] escribiu:
Quoting chaos [EMAIL PROTECTED]:
Solo una cosa, aunque las tarjetas estan baratas yo haria un alias
de la primera tarjeta xD
en el linux tendria
eth0 62.x.x.x
eth0:1 192.168.1.1
en el windows
eth0 192.168.1.2
gateway 192.168.1.1
¿y como se hace esto si lo
chaos escribiu:
esquema cableado/tarjetas:
cable-modem
|
|
(cable rj45)
|
|
tarjeta1 equipo1 (esta coje la ip del dhcp del cable-modem)
tarjeta2 equipo1 (ip fija, la que quieras, ej: 192.168.0.1)
|
|
(cable rj45 cruzado o al hub)
|
|
tarjeta1 equipo2 (ip fija ej:192.168.0.2
Lo que se llama cable cruzado ¿es el cable rj45 con las conexiones
cambiadas para poder conectar dos ordenadores sin hub?
Sí.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
-modem
|
|
(cable rj45)
|
|
tarjeta1 equipo1 (esta coje la ip del dhcp del cable-modem)
tarjeta2 equipo1 (ip fija, la que quieras, ej: 192.168.0.1)
|
|
(cable rj45 cruzado o al hub)
|
|
tarjeta1 equipo2 (ip fija ej:192.168.0.2)
en cuanto al software puedes
Hola:
A ver quien me puede ayudar:
Tengo en casa instalado la conexion a internet por
la empresa ONO, con el cable-modem de 128 kbytes de la marca Motorola Surfboard
SB4101 que tiene 2 conexiones, una salida es por rj45 para canectarla a una
tarjeta de red y tambien la porculera salida USB
esquema cableado/tarjetas:
cable-modem
|
|
(cable rj45)
|
|
tarjeta1 equipo1 (esta coje la ip del dhcp del cable-modem)
tarjeta2 equipo1 (ip fija, la que quieras, ej: 192.168.0.1)
|
|
(cable rj45 cruzado o al hub)
|
|
tarjeta1 equipo2 (ip fija ej:192.168.0.2)
en cuanto
Dario
Cualquir duda avisa!
-- Mensaje original --
esquema cableado/tarjetas:
cable-modem
|
|
(cable rj45)
|
|
tarjeta1 equipo1 (esta coje la ip del dhcp del cable-modem)
tarjeta2 equipo1 (ip fija, la que quieras, ej: 192.168.0.1)
|
|
(cable rj45 cruzado o al hub
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sat, 18 May 2002, Deva Seetharam wrote:
when i do a ifup eth1 or pump -i eth1, i get the message operation
failed. (btw, i did register the mac address with att.)
Sounds like your iptables rules are blocking dhcp. I'm also not too
familiar
Ron Johnson, 2002-May-18 21:29 -0500:
On Sat, 2002-05-18 at 21:04, Deva Seetharam wrote:
hi all
i run debian kernel 2.4.18 on a ibm t22 notebook. i am trying
to connect to att cable-modem using the intel ethernet card.
i have pump as the dhcp client. i dont have dhcp
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 18 May 2002 07:29 pm, Ron Johnson wrote:
On Sat, 2002-05-18 at 21:04, Deva Seetharam wrote:
hi all
i run debian kernel 2.4.18 on a ibm t22 notebook. i am trying
to connect to att cable-modem using the intel ethernet card.
i have
hi all
i run debian kernel 2.4.18 on a ibm t22 notebook. i am trying
to connect to att cable-modem using the intel ethernet card.
i have pump as the dhcp client. i dont have dhcp-client installed.
my /etc/network/interfaces has the entry:
iface eth1 inet dhcp
when i do a ifup
On Sat, 2002-05-18 at 21:04, Deva Seetharam wrote:
hi all
i run debian kernel 2.4.18 on a ibm t22 notebook. i am trying
to connect to att cable-modem using the intel ethernet card.
i have pump as the dhcp client. i dont have dhcp-client installed.
my /etc/network/interfaces
Hola chicos otra vez, espero que me podais ayudar estoy intentando configurar
una maquina Linux la cual tiene 2 tarjetas de red, una para la red interna
(192.168.0.1) y
otra tarjeta de red para el Cable Modem.
Hasta ahora todo iba perfecto con una unica tarjeta para el cable modem.
mi
Ed Hola chicos otra vez, espero que me podais ayudar estoy intentando
configurar
una maquina Linux la cual tiene 2 tarjetas de red, una para la red interna
(192.168.0.1) y
otra tarjeta de red para el Cable Modem.
Hasta ahora todo iba perfecto con una unica tarjeta para el cable modem
otra vez, espero que me podais ayudar estoy intentando configurar
una maquina Linux la cual tiene 2 tarjetas de red, una para la red interna
(192.168.0.1) y
otra tarjeta de red para el Cable Modem.
Hasta ahora todo iba perfecto con una unica tarjeta para el cable modem.
mi configuración era
/etc
:
Hola chicos otra vez, espero que me podais ayudar estoy intentando configurar
una maquina Linux la cual tiene 2 tarjetas de red, una para la red interna
(192.168.0.1) y
otra tarjeta de red para el Cable Modem.
Hasta ahora todo iba perfecto con una unica tarjeta para el cable modem.
mi
Aupa, me han instalado un cablemodem con windows por el puerto USB,
ahora he comprado una tarjeta de red para intentar liberarme de usar
windows pero no consigo conectarme, he configurado el interfaces para
que use el dhcp-client pero no logro que me asigne una ip, si hago
ifconfig no tengo IP, he
Yo tuve a veces problemas en su momento utilizando dhcp-client. No era
cable-modem,
ni nada parecido, sino una lan normal y corriente. Con pump me funcionó.
-Mensaje original-
De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Enviado el: miércoles, 24 de abril de 2002 18:32
Para: Luis Cano
Hi
Quick note to say thanks for the many responses to my posting (subject: Setting
up ntl cable/DHCP?) Because of work commitments (working away from home,
deadlines etc
) I want be able to try out all the suggestions until later this
week.
I will keep you all posted on my progress (good or
Hi
I think I could be tantalisingly close to getting a cable modem up and
running with my Debian box (Woody on a Compaq Professional Workstation
5000 PPro SMP) if I could just get my DHCP client to talk to my cable
operator's DHCP server.
The story so far:
*Cable Modem side - My cable operator
connection :-)
--
Jason Chambers ([EMAIL PROTECTED])
Leicester, England
[EMAIL PROTECTED] wrote:
Hi
I think I could be tantalisingly close to getting a cable modem up and
running with my Debian box (Woody on a Compaq Professional Workstation
5000 PPro SMP) if I could just get my DHCP client
On Sun, Apr 21, 2002 at 10:41:18AM +0100, [EMAIL PROTECTED] wrote:
I think I could be tantalisingly close to getting a cable modem up and
running with my Debian box (Woody on a Compaq Professional Workstation
5000 PPro SMP) if I could just get my DHCP client to talk to my cable
operator's
On Sun, Apr 21, 2002 at 10:41:18AM +0100, [EMAIL PROTECTED] wrote:
Hi
The DHCP client software I am using is chcp3-client v3.0+3.0.1r when I
run the ?dhclient? command I get the following:
Listening on LPF/eth0/00:80:5f:c1:55:40
Sending on LPF/eth0/00:80:5f:c1:55:40
Listening on LPF/lo/
Aupa, me han instalado el cablemodem con euskaltel un
RCA(digital|Broadband Cable Modem) de Thomson, la instalacion me la han
hecho en Windows por USB y yo lo quiero configurar en woody, el
cablemodem tiene entrada RJ45 ademas del USB, he llamado a euskaltel
para que me digan como conectarme al
pasa a mi.
Venga suerte!!
-Mensaje original-
De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Enviado el: sábado, 13 de abril de 2002 10:26
Para: Debian-Users-spanish
Asunto: Cable modem
Aupa, me han instalado el cablemodem con euskaltel un
RCA(digital|Broadband Cable Modem) de Thomson, la
-
De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Enviado el: sábado, 13 de abril de 2002 10:26
Para: Debian-Users-spanish
Asunto: Cable modem
Aupa, me han instalado el cablemodem con euskaltel un
RCA(digital|Broadband Cable Modem) de Thomson, la instalacion me la han
hecho en Windows
A Dissabte 13 Abril 2002 13:17, [EMAIL PROTECTED] va escriure:
la linea iface eth0 inet dhcp va sola en el archivo???
efectivamente, si pones 'static' has de indicarle direccion,mascara,
pasarela, etc; pero como va por dhcp no has de poner nada mas.
--
To UNSUBSCRIBE, email to [EMAIL
: sábado, 13 de abril de 2002 14:39
Para: debian-user-spanish@lists.debian.org
Asunto: Re: Cable modem
On Sat, Apr 13, 2002 at 01:50:18PM +0200, Salvador Oller wrote:
A Dissabte 13 Abril 2002 13:17, [EMAIL PROTECTED] va escriure:
la linea iface eth0 inet dhcp va sola en el archivo
Mira sí que puedes entrar a la configuración del Cable Modem si es lo
que quieres...
Si quieres saber como poder entrar en el Cable modem te aconsejo que te
pases por
http://www.bandaancha.st
- Original Message -
From: [EMAIL PROTECTED]
To: Debian-Users-spanish debian-user-spanish
veces que pasan
estas cosas.
Salu2.
-Mensaje original-
De: Miguel Ángel Vilela [mailto:[EMAIL PROTECTED]
Enviado el: sábado, 13 de abril de 2002 14:39
Para: debian-user-spanish@lists.debian.org
Asunto: Re: Cable modem
On Sat, Apr 13, 2002 at 01:50:18PM +0200, Salvador Oller
:23 -0300
Matias [EMAIL PROTECTED] wrote:
Hola:
Necesito ayuda/orientación para configurar una cuenta de internet con
fibertell argentina (cable-modem), gracias a que probé para que intenté
encontrar la ip con dhcp y nada; también probé con ponerle la ip a mano (dado
que es estatica) y
- Original Message -
From: Matias [EMAIL PROTECTED]
To: debian-espa debian-user-spanish@lists.debian.org
Sent: Wednesday, March 06, 2002 12:29 AM
Subject: cable-modem AUXILIO
Hola:
Necesito ayuda/orientación para configurar una cuenta de internet con
fibertell argentina (cable-modem
El Wednesday 06 March 2002 04:29, Matias escribió:
Hola:
Necesito ayuda/orientación para configurar una cuenta de internet con
fibertell argentina (cable-modem), gracias a que probé para que intenté
encontrar la ip con dhcp y nada; también probé con ponerle la ip a mano
(dado que es
Quisiera usar Woody, aunque también dentro de una hora voy a probar con potato
a ver si me acepta todo bien, y despues me paso a woody.
mmm, aver si entiendo, queres poner el modem como servidor?
que version de debian usas?
saludos
, asi que lo cambié x el dhcpcd
(apt-get install dhcpcd).
Espero que te sirva.
Ariel
El mié, 06-03-2002 a las 00:29, Matias escribió:
Hola:
Necesito ayuda/orientación para configurar una cuenta de internet con
fibertell argentina (cable-modem), gracias a que probé para que intenté
Hola:
Necesito ayuda/orientación para configurar una cuenta de internet con
fibertell argentina (cable-modem), gracias a que probé para que intenté
encontrar la ip con dhcp y nada; también probé con ponerle la ip a mano (dado
que es estatica) y nada, no tengo la menor idea de que tengo
Hola a todos,
Que tan facil ó dificil es poner cable modem(no mix) en debian, hay que
tener en cuenta algo?
Saludos Fabian
--
++
| Ad augusta per angusta |
++
Es facil solo hay que ponel la linea
ifconfig ethx inet dhcp o lo configuras con el etherconf
Yo lo tengo hecho asi y funciona
El Dom 17 Feb 2002 22:18, Fabian escribió:
Hola a todos,
Que tan facil ó dificil es poner cable modem(no mix) en debian, hay que
tener en cuenta algo?
Saludos
Es facil solo hay que ponel la linea
ifconfig ethx inet dhcp o lo configuras con el etherconf
Yo lo tengo hecho asi y funciona
El Dom 17 Feb 2002 22:18, Fabian escribió:
hola a todos,
Que tan facil ó dificil es poner cable modem(no mix) en debian, hay que
tener en cuenta algo?
Saludos
Hello,
I have donwloaded and tried to install be base
system which worked perfectly. Unfortunately when
configuring internet, I only have the possibility of
installing PPP (which of course is not convenient to
complete the installation over the internet). I have
cable modem. Could anyone
the internet). I have
cable modem. Could anyone please tell me how can I
install my cable internet connection? I would also
appreciate if you can also tell me how to configure
local network after the base installation, as it does
not seen that there is any utility to do so in the
base installation
internet, I only have the possibility
of
installing PPP (which of course is not convenient
to
complete the installation over the internet). I
have
cable modem. Could anyone please tell me how can I
install my cable internet connection? I would also
appreciate if you can also tell me how
On Sun, Jan 27, 2002 at 07:26:43AM -0800, Ibrahim Shaame wrote:
I installed from floppy images. At no point I was
asked/prompted to configure the NIC.
I think it did ask you about modules to put into the kernel..
That is where you select the NIC under network support or something
[very long
Adam Majer, 2002-Jan-27 12:40 -0600:
On Sun, Jan 27, 2002 at 07:26:43AM -0800, Ibrahim Shaame wrote:
I installed from floppy images. At no point I was
asked/prompted to configure the NIC.
I think it did ask you about modules to put into the kernel..
That is where you select the NIC under
Alguem utiliza cable modem com o debian? Uso o papalegua da horizon e vi alguns
tutoriais de configuração. baixei o dhcpcd e instalei, porém não consigo fazer
funcioná-lo. No papalegua existe uma autenticação login/senha para entrar no
sistema via provedor (dglnet). Como é feita esta autenticação
Ok I just got a cable modem router for Christmas so I can share the broadband
connection with all the pc's in my house. One thing that I am having a
problem with is when my Woody box is plugged into the router it can not find
my ISP's mailserver. Can anyone make some suggestions of what
On Tue, Jan 01, 2002 at 10:09:44AM -0500, james martinez wrote:
| Ok I just got a cable modem router for Christmas so I can share the broadband
| connection with all the pc's in my house. One thing that I am having a
| problem with is when my Woody box is plugged into the router it can not find
Stephen Gran [EMAIL PROTECTED] writes:
I know that the card in question requires
driver rtl8139.o, which does exist on my machine.
When I do 'insmod' for this object file, I get
Device or resource busy, possibly due to IO
and/or IRQ conflicts.
look at dmesg - dmesg |less will pipe it
Whew. Maybe I'm not ready for this.
Trying to get my new Debian/potato box talking
on a cable modem setup (adelphia.net) through
a LinkSys 4-port Cable/DSL router. The two other
machines on this private net are Win98 boxes.
Adelphia uses DHCP, and AFAIK there are no fixed
IP addresses
Thus spake Raphael Bustin:
Adelphia uses DHCP, and AFAIK there are no fixed
IP addresses anywhere, other than the reserved
address used by the Linksys router: 192.168.1.1
That's a private network address, not the 'real' one, but it might be
enough.
How would I set up /etc/network/interfaces
Thanks, the article was good. Turns out the problem was a faulty
network card - I know, I should have checked this first. But it
literally gave out while I was installing Debian, so I kinda ignored
that possibility.
Luke
Josh McKinney wrote:
On approximately Thu, Oct 11, 2001 at
Hello everyone. I've recently erased my RedHat Linux machine and
installed Debian Woody. I used [EMAIL PROTECTED] (in Canada) with RedHat just
fine, using either Pump or DHCPCD - specifying the hostname and
interface - with no problems whatever. Now when I try to use the
dynamic IP
I have rogers and I'm working fine although my setup is a little
different from yours (2.2.17 kernel, unstable). I used dhcp-client and
here's my dhclient.conf file
send host-name hostname;
and here's my /etc/network/interfaces
iface lo inet loopback
iface eth0 inet dhcp
And everything works
Strange. I'll try that when I get home today. Did you change any of
the kernel parameters in the /proc filesystem? I remember reading a
blurb about that somewhere affecting DHCP systems. Thanks!
Luke
Kyle Girard wrote:
I have rogers and I'm working fine although my setup is a
On approximately Thu, Oct 11, 2001 at 12:50:25PM -0400, Luke Reeves wrote:
Hello everyone. I've recently erased my RedHat Linux machine and
installed Debian Woody. I used [EMAIL PROTECTED] (in Canada) with RedHat
just
fine, using either Pump or DHCPCD - specifying the hostname and
Nope i'm using the stock debian kernel
On Thu, 2001-10-11 at 14:37, Luke Reeves wrote:
Strange. I'll try that when I get home today. Did you change any of
the kernel parameters in the /proc filesystem? I remember reading a
blurb about that somewhere affecting DHCP systems. Thanks!
[Thu, Oct 04, 2001 at 10:15:18AM -0400] David Priban :
a cable modem, and the DHCP server requires that I send in my
hostname with my request. So far, I have tried (and failed at
using)
the interface is configured via dhclient-script according info
received from DHCP
On Wed, Oct 03, 2001 at 10:36:57PM -0500, Michael Heldebrant wrote:
On Sat, 2001-09-29 at 19:56, Andrew Robertson wrote:
Hi. I just installed Debian last night on my system,
and everything works great except the network. I have
a cable modem, and the DHCP server requires that I
send
Hi. I just installed Debian last night on my system,
and everything works great except the network. I have
a cable modem, and the DHCP server requires that I
send in my hostname with my request. So far, I have
tried (and failed at using):
I've got DHCP working on @home cable
Are you sure that dhcpcd isn't working? I
just installed
dhcpcd, and at first I thought it wasn't working,
because
there was nothing about DHCP written to the console
during
boot. But I eventually discovered that it was
working fine...
it just doesn't print out its transmission and
On Sat, 2001-09-29 at 19:56, Andrew Robertson wrote:
Hi. I just installed Debian last night on my system,
and everything works great except the network. I have
a cable modem, and the DHCP server requires that I
send in my hostname with my request. So far, I have
tried (and failed at using
Hi. I just installed Debian last night on my system,
and everything works great except the network. I have
a cable modem, and the DHCP server requires that I
send in my hostname with my request. So far, I have
tried (and failed at using):
1) using pump to explicitly define my hostname
2) using
El vie, 21 de sep de 2001, a las 06:16:50 -0500, Gunnar Wolf comento ...
El caso es que para conectarse lo que hacen es dejar todo
automático: IP automática, y DNS automática. He estado leyendo sobre el
tema, pero no he encontrado nada para dejar tantas cosas de forma
automática. Y me
Antes que nada, agradecer las respuestas que me han dado sobre el
tema de la tarjeta. Aunque sigo sin poder hacerlo funcionar.
He descubierto que con otra tarjeta que no sea la que me
pusieron ellos, no funciona. Esta tarjeta era la rtl8139, por lo que
gracias a las respuestas, ya
, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hola.
Yo llevo año y medio con DHCP en casa.
Tengo dos tarjets de red en el equipo, LAN en eth0 e inet en eth1.
A mi me instalaron 3COM tanto la tarjeta como el cable-modem.
De la configuración de
?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hola.
Yo llevo año y medio con DHCP en casa.
Tengo dos tarjets de red en el equipo, LAN en eth0 e inet en eth1.
A mi me instalaron 3COM tanto la tarjeta como el cable
Muchas gracias a todos por vuestra ayuda. El Cable modem está
configurado correctamente. Así que, ...
QmSf...
Hola
pregunta que hice, pero hay un pequeño detalle que es uno de los que me tiene
más
preocupado. El DNS en Windows, también lo pusieron de forma automática. He
mirado
en la ayuda del Manual lo del archivo resolv.conf, y no he visto ninguna
el dhcp te pondrá las dns que toquen el
- Original Message -
From: heissu [EMAIL PROTECTED]
To: usuarios debian en castellano debian-user-spanish@lists.debian.org
Sent: Saturday, September 22, 2001 6:37 AM
Subject: Siguen los problemas del cable modem
Antes que nada, agradecer las respuestas que me han dado sobre el
- Original Message -
From: heissu [EMAIL PROTECTED]
To: usuarios debian en castellano debian-user-spanish@lists.debian.org
Sent: Saturday, September 22, 2001 8:11 AM
Subject: Sobre el cable modem... ¡Por fin, RESUELTO!
Muchas gracias a todos por vuestra ayuda. El Cable modem está
On Fri, Sep 21, 2001 at 06:16:50PM -0500, Gunnar Wolf wrote:
El caso es que para conectarse lo que hacen es dejar todo
automático: IP automática, y DNS automática. He estado leyendo sobre el
tema, pero no he encontrado nada para dejar tantas cosas de forma
automática. Y me pregunto si
No sé si habrán oído hablar de lo del cable modem (espero que sí,
aunque tampoco importa tanto eso). Bueno, el caso es que me lo han
instalado en casa, aunque lógicamente los que configuraban el tema de
Linux sólo conocían a los Pingüinos del Loro Parque... La cuestión es
que tuve que ponerles
On Sat, 22 Sep 2001 00:05:49 +0200
heissu [EMAIL PROTECTED] wrote:
La tarjeta de red tiene soporte en el kernel, así que no hay problema. El
modulo se llama rtl8139.
No sé si habrán oído hablar de lo del cable modem (espero que sí,
aunque tampoco importa tanto eso). Bueno, el caso es que
On Thursday 16 August 2001 16:38, dman wrote:
On Thu, Aug 16, 2001 at 04:11:48PM -0700, Jaye Inabnit ke6sls wrote:
Greetz,
I have been running myself through the ringer trying to get debian to log
onto my new Cox Communications cable modem using @home. I was given a new
nic
(Dlink
On 16 Aug 2001 19:54:53 -0400, Alan Shutko wrote:
Michael Heldebrant [EMAIL PROTECTED] writes:
I may also go back to dhcpd from pump since pump seems unable to ever
renew it's lease.
At least, it can't obtain a new IP if the dhcp server decides to
change yours. I have a url to the
Greetz,
I have been running myself through the ringer trying to get debian to log
onto my new Cox Communications cable modem using @home. I was given a new nic
(Dlink dfe-550tx) that wasn't supported by linux. I found a site and pulled
down source and attempted to build it for use on my
On 16 Aug 2001 12:42:29 -0700, Jaye Inabnit ke6sls wrote:
Greetz,
I have been running myself through the ringer trying to get debian to log
onto my new Cox Communications cable modem using @home. I was given a new nic
(Dlink dfe-550tx) that wasn't supported by linux. I found a site
On Thursday 16 August 2001 12:54, you wrote:
On 16 Aug 2001 12:42:29 -0700, Jaye Inabnit ke6sls wrote:
Greetz,
I have been running myself through the ringer trying to get debian to log
onto my new Cox Communications cable modem using @home. I was given a new
nic (Dlink dfe-550tx
cable modem using @home. I was given a new
nic (Dlink dfe-550tx) that wasn't supported by linux. I found a site and
pulled down source and attempted to build it for use on my 2.2.17 kernel
(didn't happen) then finally pulled down kernel 2.4.7, where it is
supported. I can boot up 2.4.7
NAT.
Kent
On Thu, Aug 16, 2001 at 12:42:29PM -0700, Jaye Inabnit ke6sls wrote:
Greetz,
I have been running myself through the ringer trying to get debian to log
onto my new Cox Communications cable modem using @home. I was given a new nic
(Dlink dfe-550tx) that wasn't supported
trying to get debian to
log onto my new Cox Communications cable modem using @home. I was
given a new nic (Dlink dfe-550tx) that wasn't supported by linux. I
found a site and pulled down source and attempted to build it for use
on my 2.2.17 kernel (didn't happen) then finally pulled
would be to try
and power cycle both the cable modem and the computer. I seem to have a
problem where my cable modem will not connect no matter what unless I
reboot. I'm still investigating why.
--mike
far everything seems
ok.
The only other thing that I can think of at the moment would be to try
and power cycle both the cable modem and the computer. I seem to have a
problem where my cable modem will not connect no matter what unless I
reboot. I'm still investigating why.
--mike
Mike
. Sorry to be demanding all this input from you, I'm
still fishing for something that seems wrong. So far everything seems
ok.
The only other thing that I can think of at the moment would be to try
and power cycle both the cable modem and the computer. I seem to have a
problem where my
. Without
| shutting off the cable modem, I was able to gain my ip and was on the net
| with it.
|
| I will 'assume' this means the MAC isn't an issue - that the cablemodem and
| @home dont care about the nic in use. So, this means that I can get two
| differnt windoz boxes to work but sadly
the nic and set them up as I did on the lap top. Without
| shutting off the cable modem, I was able to gain my ip and was on the net
| with it.
|
| I will 'assume' this means the MAC isn't an issue - that the cablemodem and
| @home dont care about the nic in use. So, this means that I can
Michael Heldebrant [EMAIL PROTECTED] writes:
I may also go back to dhcpd from pump since pump seems unable to ever
renew it's lease.
At least, it can't obtain a new IP if the dhcp server decides to
change yours. I have a url to the bugzilla about that somewhere
--
Alan Shutko [EMAIL
101 - 200 of 427 matches
Mail list logo
