My new video card has arrived, a diamond stealth video 2500. I've tried to run XF86Setup, but am not getting anything usable.
I tell it which card, and for monitor have tried both the "can do 1280x1024 at 60hx", and actually entering the ranges for my machine, 30-66 and 55-130. It successfully starts the xserver, though it's a grey with black speckles, and the speckles stay when the dialogs for xvidtune come up. After saving, i try to startx, but get a .xsession-errors of pv3439.vincent being added to access control list pv2086.vincent being added to access control list pv2087.vincent being added to access control list pv2079.vincent being added to access control list pv217a.vincent being added to access control list pv21f2.vincent being added to access control list eyry.econ being added to access control list hawkins.econ being added to access control list pv2102.vincent being added to access control list [1] 228 [2] 229 xterm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0" xterm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0" and the scrollby messages are XFree86 Version 3.3.1 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: August 4 1997 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: Linux 2.0.21 i486 [ELF] Configured drivers: S3: accelerated server for S3 graphics adaptors (Patchlevel 0) newmmio, mmio_928, s3_generic (using VT number 7) XF86Config: /etc/X11/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: rules: "xfree86" (**) XKB: model: "pc101" (**) XKB: layout: "us" (**) XKB: options: "ctrl:nocaps" (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200, 3 button emulation (timeout: 50ms) (**) S3: Graphics device ID: "Primary Card" (**) S3: Monitor ID: "Primary Monitor" (--) S3: Mode "512x384" needs vert refresh rate of 97.39 Hz. Deleted. (--) S3: Mode "320x240" needs vert refresh rate of 120.13 Hz. Deleted. (--) S3: Mode "320x200" needs vert refresh rate of 139.89 Hz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 64.71 kHz. Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi" *** None of the configured devices were detected.*** Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages _X11TransSocketUNIXConnect: Can't connect: errno = 111 giving up. xinit: Connection refused (errno 111): unable to connect to X server xinit: No such process (errno 3): Server error. These don't seem to be the same modes as xvidtune received. However, if i put the old stealth vram card in, and run through the setup, I get a configuration that works on it (but not the 2500). I reallly have no idea what to do at this point. (hmm, and why isn't emacs wrapping my lines???) rick -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .