On 05/26/2007 10:42 AM, Georg Heinrich wrote:
Hello,
I get the following error messages about every minute on the console:
bcm43xx: PHY connected
bcm43xx: Microcode bcm43xx_microcode5.fw not available or load failed
bcm43xx: core_up for active 802.11 core failed (-2)
The HW is:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Sudev Barar rašė:
bcm43xx: PHY connected
bcm43xx: Microcode bcm43xx_microcode5.fw not available or load
failed
bcm43xx: core_up for active 802.11 core failed (-2)
[...]
This means that your machine has broadcom wireless card and
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sat, 26 May 2007 17:42:54 +0200
Georg Heinrich [EMAIL PROTECTED] wrote:
Hello,
I get the following error messages about every minute on the console:
bcm43xx: PHY connected
bcm43xx: Microcode bcm43xx_microcode5.fw not available or
Hello!
My system is Debian Etch.
After I downloaded the new linux-source-2.6.18, compiled it and
installed the new custom kernel, I get error messages on console prompt
when logged in:
-bash: id: command not found
-bash: [: : integer expression expected
and after gdm login I get error message
Rodolfo Medina wrote:
Sometimes when I'm sailing in internet with my epiphany or mozilla browser
the following message appears:
This page contains information of a type (application/x-shockwave-flash)
that can only be viewed with the appropriate Plug-in.
, and the web site cannot be
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Rodolfo Medina wrote:
Rodolfo Medina wrote:
Sometimes when I'm sailing in internet with my epiphany or mozilla browser
the following message appears:
This page contains information of a type (application/x-shockwave-flash)
that can only be
Rodolfo Medina wrote:
Sometimes when I'm sailing in internet with my epiphany or mozilla browser
the following message appears:
This page contains information of a type (application/x-shockwave-flash)
that can only be viewed with the appropriate Plug-in.
, and the web site cannot be
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Rodolfo Medina wrote:
Rodolfo Medina wrote:
Sometimes when I'm sailing in internet with my epiphany or mozilla browser
the following message appears:
This page contains information of a type (application/x-shockwave-flash)
that can only be
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
[snip]
I unpacked the file install_flash_player_7_linux.tar.gz and installed it
with:
$ ./flashplayer-installer
. Now it seems all right.
Joe Hart [EMAIL PROTECTED] writes:
Now that is not something I can understand. Why would you want
Why do I always get this message when I open The Gimp?
Unable to open a test swap file. To avoid data loss please check the
location and permissions of the swap directory defined in your
Preferences (currently /tmp/gimp-2.0).
There's no such directory. If I create it, then restart The Gimp,
On Fri, Apr 27, 2007 at 11:50:41AM -0400, Patrick Wiseman wrote:
Why do I always get this message when I open The Gimp?
Unable to open a test swap file. To avoid data loss please check the
location and permissions of the swap directory defined in your
Preferences (currently /tmp/gimp-2.0).
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Patrick Wiseman wrote:
Why do I always get this message when I open The Gimp?
Unable to open a test swap file. To avoid data loss please check the
location and permissions of the swap directory defined in your
Preferences (currently
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Johannes Wiedersich wrote:
Patrick Wiseman wrote:
Why do I always get this message when I open The Gimp?
Unable to open a test swap file. To avoid data loss please check the
location and permissions of the swap directory defined in your
Hi, debian users.
Sometimes when I'm sailing in internet with my epiphany or mozilla browser the
following message appears:
This page contains information of a type (application/x-shockwave-flash) that
can only be viewed with the appropriate Plug-in.
, and the web site cannot be viewed.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Rodolfo Medina wrote:
Hi, debian users.
Sometimes when I'm sailing in internet with my epiphany or mozilla browser the
following message appears:
This page contains information of a type (application/x-shockwave-flash) that
can only be
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Andrew J. Barr wrote:
Rodolfo Medina wrote:
Hi, debian users.
Sometimes when I'm sailing in internet with my epiphany or mozilla browser
the
following message appears:
This page contains information of a type
I thought I had installed maxima sucessfully from the
etch (testing) distribution, but typing maxima from an xterm gave:
error while loading shared libraries:
libgmp.so.3: cannot open shared object file: No such file or directory
Can this be fixed by downloading libgmp.deb (or similar
On Sun, 25 Mar 2007, Charles Blair wrote:
I thought I had installed maxima sucessfully from the
etch (testing) distribution, but typing maxima from an xterm gave:
error while loading shared libraries:
libgmp.so.3: cannot open shared object file: No such file or directory
Can this be fixed
On Saturday 10 March 2007 16:49, heba wrote:
2007/3/10, Chris [EMAIL PROTECTED]:
cpio: ./etc/udev/.#permissions.rules: No such file or directory
happens when I dist-upgrade. I have an etch/unstable system.
Thanks for any suggestions,
Chris
hi,
the error say you that don't
cpio: ./etc/udev/.#permissions.rules: No such file or directory
happens when I dist-upgrade. I have an etch/unstable system.
Thanks for any suggestions,
Chris
--
C. Hurschler
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
2007/3/10, Chris [EMAIL PROTECTED]:
cpio: ./etc/udev/.#permissions.rules: No such file or directory
happens when I dist-upgrade. I have an etch/unstable system.
Thanks for any suggestions,
Chris
hi,
the error say you that don't found the file
permissions.rules
this might be a bug,
Roelof Wobben writes:
Hello,
Sometimes i see this error.
My system is a amd64 processor with 1GB memory.
What does this mean ?
You mean:
syslog.0:Nov 13 04:02:22 localhost kernel: APIC error on CPU0: 40(40)
?
AFAIK is harmless. You can turn it off with the noapic kernel
parameter.
--
Hello,
Sometimes i see this error.
My system is a amd64 processor with 1GB memory.
What does this mean ?
Regards,
Roelof
_
Windows Live Mail: Kies je eigen kleur, indeling en contacten!
Since the upgrade, I get this in my system emals:
exim paniclog /var/log/exim4/paniclog on d_baron has non-zero size, mail
system might be broken
A check of the paniclog in question shows items of form:
2006-08-03 15:15:17 1G8bRy-0001hg-ES User 0 set for address_file transport is
on the
Hi again!
About my previous answer - you can use that ONLY if you are NOT root,
else your system locks.
A better way of doing this:
The script 10session-clean-startup I wrote before may contain:
PWD=`pwd`
( cd /tmp
for TMPFILE in `find . -xdev -user ${USER} -a \( -name *${USER}* -o
-name
The solution for the problem you have:
When running, the Panel, ESD and other GNOME apps leave a state-info file in /tmp. You have to clean the /tmp files before you start the GNOME session, else GNOME 'thinks' some components are still active. You can do it this way:
1. Create a
apt-get update gives me (at the end of the downloads)
W: Bizarre Error - File size is not what the server reported 189 191
W: You may want to run apt-get update to correct these problems
I saw this on an update from about 7 hours ago, and again just now.
Which kind of undermines my original
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Ross Boylan wrote:
apt-get update gives me (at the end of the downloads)
W: Bizarre Error - File size is not what the server reported 189 191
My approach to this, albeit basic, is the wait and see one. The
following day it is usually ok. If I'm
On Fri, 2006-04-07 at 11:01 -0700, Ross Boylan wrote:
apt-get update gives me (at the end of the downloads)
W: Bizarre Error - File size is not what the server reported 189 191
W: You may want to run apt-get update to correct these problems
The problem's gone now. I'm still wondering what it
Ross Boylan wrote:
On Fri, 2006-04-07 at 11:01 -0700, Ross Boylan wrote:
apt-get update gives me (at the end of the downloads)
W: Bizarre Error - File size is not what the server reported 189 191
W: You may want to run apt-get update to correct these problems
The problem's gone now. I'm
I set up a simple firewall and SNAT using iptables. All works fine
except that sometimes I see the following in the /var/log/syslog
Mar 30 08:54:23 dobby kernel: New not syn:IN= OUT=eth1 SRC=314.12.142.106 \
DST=314.12.128.3 LEN=65 TOS=0x00 PREC=0x00 TTL=64 ID=60918 DF PROTO=TCP \
Client is getting the following on his Debian 3.0 server:
Mar 13 12:00:19 gw kernel: 1Unable to handle kernel paging request at
virtual address 04e8c358
Mar 13 12:00:19 gw kernel: printing eip:
Mar 13 12:00:19 gw kernel: 04e8c358
Mar 13 12:00:19 gw kernel: Oops:
Mar 13 12:00:19 gw kernel:
Pura curiosidad:
http://www.networkworld.com/community/?q=node/4630
Saludos.
Debian stable. CD/DVD drive appears to be crapping out. dmesg shows:
[snip]
hdc: attached ide-cdrom driver
hdc: ATAPI 32X DVD-ROM drive, 256kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error:
On Tue, Jan 31, 2006 at 12:12:04PM -0600, Peter Horst wrote:
Debian stable. CD/DVD drive appears to be crapping out. dmesg shows:
[snip]
hdc: attached ide-cdrom driver
hdc: ATAPI 32X DVD-ROM drive, 256kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
hdc: packet command error: status=0x51
I get this message when I try to stop the dccifd daemon:
# /etc/init.d/dcc-client stop
Stopping DCC program interface daemon: dccifdstart-stop-daemon: warning:
failed to kill 5645: No such process
.
Despite this, ps ax reveals the dccifd daemon is running (prior to running
the stop script).
Thank you sir, I will give that a try.Alvin Oga [EMAIL PROTECTED] wrote:
On Sun, 2 Oct 2005, Jeremy Merritt wrote: Windoze is installed on /dev/hda1k /dev/hda1 * 1 2433 19543041 7 HPFS/NTFSk .. that agrees with your prior statement /dev/hda2 2434 4865 19535040 f W95 Ext'd (LBA)that is windoze too
Alvin--
Just that simple change did it. Thanks a lot sir!
So I take it that Grub looks at hd0 as the BOOT drive
based on your BIOS settings and boot sequence. hd1 in
this case would be hda, hd0 is hdb because hdb is
the actual boot device.
Thanks again for your help,
J. Merritt
--- Alvin Oga
I was having trouble getting the grub loader to work
on my machine after having to re-install Windoze XP.
Finally I got the grub menu to come up but Debian will
not load properly.
/dev/hdb2 is the location of /root/grub
The commands for loading Debian are listed as follows:
root (hd1,1)
hi ya jeremy
On Sun, 2 Oct 2005, Jeremy Merritt wrote:
more grub fun :-)
/dev/hdb2 is the location of /root/grub
i assume you have a type and/or a system install problem
-- what is the disk that windozed is installed on
( presumably hda ?? aka C: )
-- if you
Jeremy Merritt wrote:
I was having trouble getting the grub loader to work
on my machine after having to re-install Windoze XP.
Finally I got the grub menu to come up but Debian will
not load properly.
/dev/hdb2 is the location of /root/grub
The commands for loading Debian are listed as
Hey Alvin--
Windoze is installed on /dev/hda1
Here is an output from fdisk -l:
Disk /dev/hda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id
System
/dev/hda1
Here is the fdisk -l output from today. If this is of
any help. There was no physical drive swapping, all I
did was set the BIOS to look at hdb first, before hda.
It WAS looking at hda first before.
Disk /dev/hda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units =
On Sun, 2 Oct 2005, Jeremy Merritt wrote:
Windoze is installed on /dev/hda1
k
/dev/hda1 * 12433195430417
HPFS/NTFS
k .. that agrees with your prior statement
/dev/hda22434486519535040f
W95 Ext'd (LBA)
that is windoze too ...
Hello List,
on my Etch box (daily updated) I get, when I launch
sawfish-ui
*** File error: No such file or directory, gui/gtk-2/gtk
Any idea ?
Thanks,
Jerome
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
El mar, 06-09-2005 a las 10:09 +0700, Ms Linuz escribió:
I had this problem and solved by editing my gnome2 session file.
$home/.gnome2/session
I found two entries of gnome-panel there and delete one ( backup first
of course )
Make sure you delete all line which start with the same number as
Hi Preston,
I am having the same problem. Did you find a solution for this issue yet?
Harry
--On Thursday, September 01, 2005 09:43:11 AM -0500 Preston Boyington
[EMAIL PROTECTED] wrote:
After a recent update (I am running Unstable) I receive an error message
at GNOME startup that states
On Sun, Sep 04, 2005 at 09:06:47PM +0200, [EMAIL PROTECTED] wrote:
Hi Preston,
I am having the same problem. Did you find a solution for this issue yet?
After a recent update (I am running Unstable) I receive an error message
at GNOME startup that states that there is already a panel
David Purton wrote:
On Sun, Sep 04, 2005 at 09:06:47PM +0200, [EMAIL PROTECTED] wrote:
Hi Preston,
I am having the same problem. Did you find a solution for this issue yet?
After a recent update (I am running Unstable) I receive an error message
at GNOME startup that states
vasaka wrote:
David Purton wrote:
On Sun, Sep 04, 2005 at 09:06:47PM +0200, [EMAIL PROTECTED] wrote:
Hi Preston,
I am having the same problem. Did you find a solution for this issue
yet?
After a recent update (I am running Unstable) I receive an error
message
at GNOME startup
Look here:
http://bugzilla.gnome.org/show_bug.cgi?id=309506
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Paolo Ornati wrote:
Look here:
http://bugzilla.gnome.org/show_bug.cgi?id=309506
I report also the quick workaround:
Killing smproxy in the Desktop-Preferences-sessions menu,
and then saving my session seems to be a usable work-around
:)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
After a recent update (I am running Unstable) I receive an error message at
GNOME startup that states that there is already a panel running. Once GNOME
finishes starting it offers me a box to ok, but how can I tell it to only
open one panel to begin with? Where do I edit this configuration
No luck googling ...
This error message appears when apt-upgrading ( if there is(are)
package(s) needed
to be upgraded ), and installing.
---
Traceback (most recent call last):
File /usr/bin/apt-history, line 33, in ?
import apt_pkg
ImportError: No module named apt_pkg
--
But it upgrades
Hello debian-user mailing list !
Fresh installed system Dual MMX 466 with sarge r0 (not r0a) and
2.6.8-2-686-smp kernel.
echolon:~# apt-get install syslog-ng
Reading Package Lists... Done
Building Dependency Tree... Done
The following packages will be REMOVED:
klogd sysklogd
The
the same chipset.
I found 10 posts in google refering to the same error message but the kernel
was 2.6.0 and some gento AMD64 architecture issues.
any help is appreciated
Mohammad
Am 23.05.2005 um 13:23 schrieb Mohammad Halawah:
Context: I want to install the WLAN driver for realtek 8180 using the driver
provided by the manufacturer.
Problem: When I insert the module using
insmode 8180_26_private.ko
I get in the shell the following:
insmod: error inserting
I'm running sarge, and just finished running sudo aptitude update
sudo aptitude upgrade.
All usually goes fine, except today. I'm now getting this error
message;
sudo aptitude upgrade
Reading Package Lists... Done
Building Dependency Tree
Reading extended state information
Initializing package
Maybe is a bug...
I've encountered it 10 minutes ago after an apt-get upgrade on sid...
Rodney D. Myers wrote:
I'm running sarge, and just finished running sudo aptitude update
sudo aptitude upgrade.
All usually goes fine, except today. I'm now getting this error
message;
sudo aptitude upgrade
--- Rodney D. Myers [EMAIL PROTECTED] wrote:
Any idea how to correct this?
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=281601
-- Thomas Adam
=
The Linux Weekend Mechanic -- http://linuxgazette.net
TAG Editor -- http://linuxgazette.net
shrug We'll just save up your
I'm wondering... should I delay mine...?
Riccardo Tortorici wrote:
Maybe is a bug...
I've encountered it 10 minutes ago after an apt-get upgrade on sid...
Rodney D. Myers wrote:
smime.p7s
Description: S/MIME Cryptographic Signature
On Wed, 17 Nov 2004 00:27:21 + (GMT)
Thomas Adam [EMAIL PROTECTED] wrote:
--- Rodney D. Myers [EMAIL PROTECTED] wrote:
Any idea how to correct this?
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=281601
-- Thomas Adam
Just grabbed the new file listed in the bug report. Does not
Hi,
I am a new user of debian. Recently, I installed
debian 3.0 in my computer. However, I encounter a very
strange error.
I boot the computer with the installation CD and
follow the instruction.
When installing base component, error occurs.
The error message is like fail to chroot /target dpkg
heyboy wrote:
Hi,
I am a new user of debian. Recently, I installed
debian 3.0 in my computer. However, I encounter a very
strange error.
I don't use Woody anymore. If possible you might try the new Sarge
Installer. Sarge will be the new Debian stable soon. That will not have
the error you
Hi,
I'm getting the following error message in my messages file:
Aug 18 18:47:00 bithynia kernel: ACPI-0165: *** Error: No object was
returned from [\_SB_.PCI0.PX40.UAR2._STA] (Node c12f9300), AE_NOT_EXIST
kernel: 2.4.26
testing/unstable
Athlon 1.7
ASUS A7V266-E
What is causing
Stephen Patterson [EMAIL PROTECTED] writes:
On Fri, 13 Aug 2004 10:30:07 +0200, John L Fjellstad wrote:
I'm running woody with backports of samba (3.0.5).
I keep seeing the following in my syslog, and was wondering if someone
might now how to fix whatever the problem is.
Aug 12 16:02:23
I'm running woody with backports of samba (3.0.5).
I keep seeing the following in my syslog, and was wondering if someone
might now how to fix whatever the problem is.
Aug 12 16:02:23 rivendell smbd[5441]: [2004/08/12 16:02:23, 0]
passdb/pdb_tdb.c:tdb_update_sam(652)
Aug 12 16:02:23 rivendell
On Fri, 13 Aug 2004 10:30:07 +0200, John L Fjellstad wrote:
I'm running woody with backports of samba (3.0.5).
I keep seeing the following in my syslog, and was wondering if someone
might now how to fix whatever the problem is.
Aug 12 16:02:23 rivendell smbd[5441]: [2004/08/12 16:02:23, 0]
On Thu, Aug 12, 2004 at 13:57:55 -0500, John Foster wrote:
ERROR: language plpgsql does not exist
Apparently you haven't installed the Pl/PgSQL procedural language in your
template database yet. See
http://www.postgresql.org/docs/7.4/static/xplang.html
for documentation and try
I got this error when setting up SQL-Ledger
Error!
CREATE FUNCTION del_yearend() RETURNS OPAQUE AS '
begin
delete from yearend where trans_id = old.id;
return NULL;
end;
' language 'plpgsql';
ERROR: language plpgsql does not exist
Any ideas as to what or why?
--
John Foster
--
To
Hi,
after having upgraded to gnome 2.6 on sid yesterday, I now get an error
message when logging in:
Fehler beim Aktivieren der XKB-Konfiguration.
Vermutlich liegt ein internes Problem mit dem X-Server vor.
Versionsdaten des X-Servers:
The XFree86 Project, Inc
4031
Sie verwenden XFree 4.3.0
Hi,
trying to install a picture gallery but it seems like most (good) picture
gallery program uses same libraries (somewhere in the backend). And one of
those libraries gives me problem (typical)...
The latest gallery program gives this error message:
Can't load '/usr/lib/perl5/auto/Image
This one has been there a while with all the 2.6.* kernels:
FATAL -- cannot find module ext2...ko (not logged anywhere). Initrd certainly
does work and the ext3 root file sysem mounts up no problem.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
Dear Roberto and friends:
You were right, Roberto. The tarball was corrupt. I downloaded a new one, and
it's already busy building the the Mplayer executable.
Thanks again.
Benjamin
--
Benjamin Sher
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
I normally put lilo on a floppy. Have just compiled kernel 2.6.3 on a Sarge
installation and made the necessary alterations to /etc/lilo.conf.
When running '/sbin/lilo', I get the following error message:-
Fatal
filesystem would be destroyed by LILO boot sector: /dev/fd0
Can anyone kindly explain
get a strange error message:
[EMAIL PROTECTED]:~/L-Files/Downloads/Mplayer/MPlayer-1.0pre3$ make
make: Nothing to be done for `all'.
[EMAIL PROTECTED]:~/L-Files/Downloads/Mplayer/MPlayer-1.0pre3$
What does this Nothing to be done for 'all' mean, please. What's missing and
what should I do
stage,
I get a strange error message:
[EMAIL PROTECTED]:~/L-Files/Downloads/Mplayer/MPlayer-1.0pre3$ make
make: Nothing to be done for `all'.
[EMAIL PROTECTED]:~/L-Files/Downloads/Mplayer/MPlayer-1.0pre3$
What does this Nothing to be done for 'all' mean, please. What's missing and
what should I
Dear Stephen and friends:
You are absolutely right. All my thanks. I su to root and did make install.
It installed just fine in /usr/local. Only problem is that the install
produced only mplayer, the command-line executable but not the gui
gmplayer even though I most definitely configured it
Hai,
Everything works now :)
Now i have to find good documentation in the dutch language so i can learn
how things are working in Debian.
So thank everyone for the hulp.
Roelof
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
hai,
I have downloaded the bootdisk from the dutch ftp-site. After that i put
them on disk.
No problem so far. I put the rescue disk in my floppy-drive and reboot the
computer.
After that I see a welcome and then several times the message unknown
keyword in syslinux.cfg
Then the boot :
I press
Roelof Wobben wrote:
hai,
I have downloaded the bootdisk from the dutch ftp-site. After that i
put them on disk.
No problem so far. I put the rescue disk in my floppy-drive and reboot
the computer.
You're referring to a rescue disk, such as:
Hao,
The answers to your questions are.
Yes, i mean that floppy.
I used three different floppy's and i used
rawrite2.
I tried the floppy-based netinstall but i will now
try the cd-based netinstall
Thank you for your help.
Roelof
Dear friends:
[Using Xandros 2.0 built on Debian]
I installed Xandros 2.0 once again a few days ago. I had to reinstall it
several times due to the appearanc e of the infamous Xlib GLX error
message. This time, after reinstalling, I monitored carefully the Xlib
GLX Extension story with glxinfo
This isn't a Debian-specific topic, but it seems my ISP doesn't carry
comp(?).os.linux.setup anymore so...
I've just installed a USB card in my old computer. It's a Belkin 5-port
card.
I get a couple of errors in this messages in dmesg.
usbdevfs: remount parameter error
** RE: the above
.
*
I want to use the modem on /dev/ttyS2. I therefore type the following
command (as root, of course), all in accordance with the modem's fine
manual:
# setserial /dev/ttyS2 uart 16550A port 0xb000 irq 4
This returns the error message:
Cannot set serial info: Address already in use
which I
On 21 Oct 2003, David Jardine wrote:
On Tue, Oct 21, 2003 at 02:55:13PM +0100, Anthony Campbell wrote:
I'm getting serious trouble with exim4.
A lot of mail, incoming and outgoing, just sits in /var/log/exim4/input
indefinitely. This includes even messages I email to myself.
However,
I'm getting serious trouble with exim4.
A lot of mail, incoming and outgoing, just sits in /var/log/exim4/input
indefinitely. This includes even messages I email to myself.
However, some things do go out (including this, if it reaches the list).
The relevant lines in
On Tue, 2003-10-21 at 09:55, Anthony Campbell wrote:
I'm getting serious trouble with exim4.
A lot of mail, incoming and outgoing, just sits in /var/log/exim4/input
indefinitely. This includes even messages I email to myself.
However, some things do go out (including this, if it reaches
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, Oct 21, 2003 at 02:55:13PM +0100, Anthony Campbell wrote:
2003-10-21 14:47:02 1ABwqk-H3-Fu == [EMAIL PROTECTED]
R=userforward defer (-1): bad mode (0100664) for /home/ac/.forward: 020
bit(s) unexpected
Can anyone suggest what is
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, Oct 21, 2003 at 10:12:51AM -0400, Greg Folkert wrote:
Yes, the files mode is incorrect. usually it should be 0600, from the
looks of it, it appears to be 0620
I am guessing you know how to fix that.
Appears to be 0020, not 0620.
- --
On 21 Oct 2003, Paul Johnson wrote:
On Tue, Oct 21, 2003 at 10:12:51AM -0400, Greg Folkert wrote:
Yes, the files mode is incorrect. usually it should be 0600, from the
looks of it, it appears to be 0620
I am guessing you know how to fix that.
Appears to be 0020, not 0620.
--
.''`.
On Tue, Oct 21, 2003 at 02:55:13PM +0100, Anthony Campbell wrote:
I'm getting serious trouble with exim4.
A lot of mail, incoming and outgoing, just sits in /var/log/exim4/input
indefinitely. This includes even messages I email to myself.
However, some things do go out (including this, if
begin Michael Montagne quote from Sat, Oct 11, 2003 at 08:08:13AM -0700
I'm getting a new apt error message that seems to be harmless yet i'd
like to understand and fix it.
W: No priority (or zero) specified for pin
What is the meaning of this?
Are you using pinning with apt? Can you
I'm getting a new apt error message that seems to be harmless yet i'd
like to understand and fix it.
W: No priority (or zero) specified for pin
What is the meaning of this?
--
Michael Montagne
[EMAIL PROTECTED]
http://www.themontagnes.com
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
on Sat, Sep 27, 2003 at 01:50:45AM +0300, Shaul Karl wrote:
On Thu, Sep 25, 2003 at 09:43:49AM +0100, steve downes wrote:
Cannot find any ref to 303 or 03:03 in the docs.
Any pointers please.
Your lilo.conf file does not mentions initrd?
--
Shaul Karl,shaulk @
On Thu, Sep 25, 2003 at 09:43:49AM +0100, steve downes wrote:
In the process of setting up a new machine I've upraded the kernel
from 2.2 to 2.4.22-1-686 using apt-get upgrade
I am getting:-
VFS Cannot open root device 303 or 03:03
Please append a correct root= boot option
Kernel
Good evening all,
I have just updated/upgraded my testing system this evening, and all
went OK except for one error message and I am unsure how to resolve the
problem that dpkg has encountered. The message is:
Preconfiguring packages ...
(Reading database ... 50115 files and directories
In the process of setting up a new machine I've upraded the kernel
from 2.2 to 2.4.22-1-686 using apt-get upgrade
I am getting:-
VFS Cannot open root device 303 or 03:03
Please append a correct root= boot option
Kernel panic: VFS: Unable to mount root fs on 03:03
I can boot from a
In the past few days, I have been getting lockups reboots, and I'm
noticing this in the /var/log/message, any idea as to what is causing
this error message;
Sep 25 18:44:14 riverside kernel: kernel BUG at inode.c:563!
Sep 25 18:44:14 riverside kernel: invalid operand:
Sep 25 18:44:14
I thought I had turned that little guy off but sure enough he was on.
OT!?!?!!!
Why I oughta...
You...
If
Guilty.
Sorry.
John Purser
-Original Message-
From: Greg Folkert [mailto:[EMAIL PROTECTED]
Sent: Tuesday, August 12, 2003 2:17 PM
To: Debian-User
Subject: Re: Bind Error
301 - 400 of 622 matches
Mail list logo
