Re: Jumpers on an AST Premmia P90

2005-12-03 Thread Andrew M.A. Cater
On Sat, Dec 03, 2005 at 01:34:14AM -0500, Tony Yeboah wrote: How can I set or find the jumpers to work with my newly bought motherboard. ? This is a dual processor motherboard with 90MHz Pentiums, about seven years old? There were posts on the Debian user lists in 2002 about this board -

Re: Jumpers on an AST Premmia P90

2005-12-03 Thread Katipo
Tony Yeboah wrote: How can I set or find the jumpers to work with my newly bought motherboard. ? Well, if it's new, you'll have all that information in the Board manual. Any further information you require you should be able to get by way of the site. And if this is the first hit on

Re: Jumpers on an AST Premmia P90

2005-12-02 Thread Tony Yeboah
How can I set or find the jumpers to work with my newly bought motherboard. ?

Jumpers on an AST Premmia P90

2002-03-03 Thread Keith O'Connell
Hi, I need some advise. I came by the shell of a AST Premmia GX with a P90 chip in it. I found old or replacement hard drive (1Gb), floppy, CD drive, a nic, cables, some additional memory etc, etc. It is, on the face of it good-to-go. Unfortunatly, it don't go! The plan is to install debian and

Re: Jumpers on an AST Premmia P90

2002-03-03 Thread Sebastiaan
High, On 3 Mar 2002, Keith O'Connell wrote: Hi, I need some advise. I came by the shell of a AST Premmia GX with a P90 chip in it. I found old or replacement hard drive (1Gb), floppy, CD drive, a nic, cables, some additional memory etc, etc. It is, on the face of it good-to-go.

Re: Jumpers on an AST Premmia P90

2002-03-03 Thread Simon Hepburn
On Sunday 03 Mar 2002 7:13 pm, Keith O'Connell wrote: When turned on the machine starts the post, gets tñhrough counting the 48mb of ram, blinks the floppy then stops. As I understand it there is a scsi interface on the board and there was a scsi hard drive fitted. It now has an ide drive