Re: Geen IPv6 via PPP

het, het stond overigens ook in je documentatie ;-) Documentatie _plus_ wat je ziet maakt de betere begripvorming. Ik als vDSL klant, met een Fritzbox waar ik vanaf wil, begrijp het niet. Het is handig als je wat ervaring hebt met PPP. Ik deed vroeger PPP over een seriële poort. Later PPP

Re: Geen IPv6 via PPP

is transparant, dus zou niet moeten uitmaken. > > > > > > > > Vraag: > > > > Waarom gebruik je Wide-DHCPv6-Client bij een statische configuratie? > > > > > > Omdat anders de /48 niet naar je geroute word of anderszins niet > > > bruikbaar i

Re: Geen IPv6 via PPP

& beter. Zo mislukt het starten van DHCP tijdens het booten nog, omdat er dan nog geen PPP verbinding is opgebouwd (denk ik). Maar daar kom ik wel uit denk ik. Daar heb ik dus een script voor. wide-dhcpv6-client doet een aantal retries en dan geeft ie het op. Vandaar dat ik die pas start nada

Re: Geen IPv6 via PPP

Op 22-05-2021 om 21:45 schreef Richard Lucassen: On Sat, 22 May 2021 16:02:58 +0200 Paul van der Vlis wrote: Sinds kort heb ik een GPON Freedom aansluiting, dat is nieuw en nog niet voor iedereen beschikbaar. Nu had ik me voorgenomen om de internet verbinding te realiseren via Debian, dat

Re: Geen IPv6 via PPP

dens het booten nog, omdat er dan nog geen PPP verbinding is opgebouwd (denk ik). Maar daar kom ik wel uit denk ik. Wat me opvalt is dat je het IPv6 IP toewijst aan "prefix-interface eth1", terwijl het toch eigenlijk het PPP-interface (wan) is wat je een IPv6 IP wilt geven. Ik heb

Re: Geen IPv6 via PPP

On Sat, 22 May 2021 16:02:58 +0200 Paul van der Vlis wrote: > Sinds kort heb ik een GPON Freedom aansluiting, dat is nieuw en nog > niet voor iedereen beschikbaar. > > Nu had ik me voorgenomen om de internet verbinding te realiseren via > Debian, dat gaat op zich prima, alleen lukt IPv6 nog

Re: Geen IPv6 via PPP

Hoi On 22/05/2021 20:05, Paul van der Vlis wrote: Op 22-05-2021 om 20:00 schreef Rob van der Putten: On 22/05/2021 19:53, Rob van der Putten wrote: On 22/05/2021 16:54, Paul van der Vlis wrote: Op 22-05-2021 om 16:02 schreef Paul van der Vlis: Sinds kort heb ik een GPON Freedom

Re: Geen IPv6 via PPP

Op 22-05-2021 om 20:00 schreef Rob van der Putten: Hoi On 22/05/2021 19:53, Rob van der Putten wrote: On 22/05/2021 16:54, Paul van der Vlis wrote: Op 22-05-2021 om 16:02 schreef Paul van der Vlis: Sinds kort heb ik een GPON Freedom aansluiting, dat is nieuw en nog niet voor iedereen

Re: Geen IPv6 via PPP

paar geprobeerd: dhclient lijkt geen PPP te kunnen, het zegt: Unsupported device type 512 for "ppp0" Daar kan ik me iets bij voorstellen. Toelichting: PPP is de nieuwere SLIP, denk "serial port". Een serieeel verbinding is zonder MAC address. En MAC-adres is waar DHCP op

Re: Geen IPv6 via PPP

Hoi On 22/05/2021 19:53, Rob van der Putten wrote: On 22/05/2021 16:54, Paul van der Vlis wrote: Op 22-05-2021 om 16:02 schreef Paul van der Vlis: Sinds kort heb ik een GPON Freedom aansluiting, dat is nieuw en nog niet voor iedereen beschikbaar. Nu had ik me voorgenomen om de internet

Re: Geen IPv6 via PPP

Op 22-05-2021 om 19:53 schreef Rob van der Putten: Hoi On 22/05/2021 16:54, Paul van der Vlis wrote: Op 22-05-2021 om 16:02 schreef Paul van der Vlis: Sinds kort heb ik een GPON Freedom aansluiting, dat is nieuw en nog niet voor iedereen beschikbaar. Nu had ik me voorgenomen om de

Re: Geen IPv6 via PPP

Hoi On 22/05/2021 16:54, Paul van der Vlis wrote: Op 22-05-2021 om 16:02 schreef Paul van der Vlis: Sinds kort heb ik een GPON Freedom aansluiting, dat is nieuw en nog niet voor iedereen beschikbaar. Nu had ik me voorgenomen om de internet verbinding te realiseren via Debian, dat gaat op

Re: Geen IPv6 via PPP

r, maar > ik heb er een paar geprobeerd: > > dhclient lijkt geen PPP te kunnen, het zegt: > Unsupported device type 512 for "ppp0" Daar kan ik me iets bij voorstellen. Toelichting: PPP is de nieuwere SLIP, denk "serial port". Een serieeel verbinding is zonder MAC address.

Re: Geen IPv6 via PPP

Nu had ik me voorgenomen om de internet verbinding te realiseren via > > Debian, dat gaat op zich prima, alleen lukt IPv6 nog niet. Zijn er hier > > anderen die dit wel aan de praat hebben? > > Overigens werkt dit precies hetzelfde als bij XS4all. > Weet dat PPP en PPPoE niet

Re: Geen IPv6 via PPP

Op 22-05-2021 om 16:02 schreef Paul van der Vlis: Hoi, Sinds kort heb ik een GPON Freedom aansluiting, dat is nieuw en nog niet voor iedereen beschikbaar. Nu had ik me voorgenomen om de internet verbinding te realiseren via Debian, dat gaat op zich prima, alleen lukt IPv6 nog niet. Zijn er

Geen IPv6 via PPP

? Met OpenWRT werkt IPv6 prima, dus het lijkt niet aan Freedom te liggen. Maar je weet maar nooit. Eigenlijk weet ik niet zeker of ik een DHCP client nodig heb hiervoor, maar ik heb er een paar geprobeerd: dhclient lijkt geen PPP te kunnen, het zegt: Unsupported device type 512 for "ppp0"

Re: Re: dip + slirp -P (ppp) working?

D Sent from my iPhone

Re: Re: dip + slirp -P (ppp) working?

D Sent from my iPhone

[Debian Sid] Upgrade of ppp package breaks connection

Running Debian Sid quite long and never had such "unstable" issue. After upgrading package ppp from 2.4.7-1+4 to 2.4.7-2+1 cannot start ppp-oe connection, requests to my ISP are failing with: MS-CHAP authentication failed: Authentication failure Nothing was changed in config/connectio

Re: gnome-ppp, el mòdem intern i la mare que els va parir.

Bon dia, Adopto la solució proposada pel Jordi. Per tant, i agraint molt l'interès de tothom, dono el tema per tancat. Gràcies. *Xavier De Yzaguirre* xdeyzaguirre(at)gmail(dot)com El dia 12 de març de 2017 a les 22:00, Jordi Mallach ha escrit: > Ep Xavier, > > El dg 12 de 03

Re: gnome-ppp, el mòdem intern i la mare que els va parir.

Ep Xavier, El dg 12 de 03 de 2017 a les 13:51 +0100, en/na Xavier De Yzaguirre i Maura va escriure: > El mòdem es un Conceptronic C56MPi intern, bus PCI que funcionava > perfecte amb el driver linux conexant a l'Ubuntu, aquest driver ara > està discontinuat. [ ... més històries de terror ... ]

Re: gnome-ppp, el mòdem intern i la mare que els va parir.

ress because personal addresses aren't > masked enough at this list's archives. Mailing lists service > administrator should fix this. > El 12/03/17 a les 14:28, Xavier De Yzaguirre i Maura ha escrit: > > Aquest equip, l'utilitza principalment una persona, ma mare, que ara te > &

Re: gnome-ppp, el mòdem intern i la mare que els va parir.

uirre i Maura ha escrit: > > Aquest equip, l'utilitza principalment una persona, ma mare, que ara te > > 92 anys. > > Fins ara l'únic que tenia que fer era engegar l'ubuntu i clicar el > > telefonet vermell del gnome-ppp i que un cop minimitzat sabia que ja > > podia arrenca

Re: gnome-ppp, el mòdem intern i la mare que els va parir.

rsona, ma mare, que ara te > > 92 anys. > > Fins ara l'únic que tenia que fer era engegar l'ubuntu i clicar el > > telefonet vermell del gnome-ppp i que un cop minimitzat sabia que ja > > podia arrencar l'evolution i enviar i rebre correus, també arrencar el > > Firefox

Re: gnome-ppp, el mòdem intern i la mare que els va parir.

ura ha escrit: > > Aquest equip, l'utilitza principalment una persona, ma mare, que ara te > > 92 anys. > > Fins ara l'únic que tenia que fer era engegar l'ubuntu i clicar el > > telefonet vermell del gnome-ppp i que un cop minimitzat sabia que ja > > podia arrencar l'evolu

Re: gnome-ppp, el mòdem intern i la mare que els va parir.

ona, ma mare, que ara te > 92 anys. > Fins ara l'únic que tenia que fer era engegar l'ubuntu i clicar el > telefonet vermell del gnome-ppp i que un cop minimitzat sabia que ja > podia arrencar l'evolution i enviar i rebre correus, també arrencar el > Firefox si volia navegar tot i q

Re: gnome-ppp, el mòdem intern i la mare que els va parir.

4:12 GMT+01:00 Josep Lladonosa <jllad...@gmail.com>: >> > I un mòdem extern? >> > >> > On 12 Mar 2017 13:52, "Xavier De Yzaguirre i Maura" >> > <xdeyzagui...@gmail.com> >> > wrote: >> >> >> >> Bon dia, >&g

Re: gnome-ppp, el mòdem intern i la mare que els va parir.

adonosa <jllad...@gmail.com>: > > I un mòdem extern? > > > > On 12 Mar 2017 13:52, "Xavier De Yzaguirre i Maura" < > xdeyzagui...@gmail.com> > > wrote: > >> > >> Bon dia, > >> Em trobo que he d'agut de muntar un nou equip per a un

Re: gnome-ppp, el mòdem intern i la mare que els va parir.

il.com>: > I un mòdem extern? > > On 12 Mar 2017 13:52, "Xavier De Yzaguirre i Maura" <xdeyzagui...@gmail.com> > wrote: >> >> Bon dia, >> Em trobo que he d'agut de muntar un nou equip per a una masia, on l'accés >> a internet sols es pot fer via pp

Re: gnome-ppp, el mòdem intern i la mare que els va parir.

Aquest equip, l'utilitza principalment una persona, ma mare, que ara te 92 anys. Fins ara l'únic que tenia que fer era engegar l'ubuntu i clicar el telefonet vermell del gnome-ppp i que un cop minimitzat sabia que ja podia arrencar l'evolution i enviar i rebre correus, també arrencar el Firefox si

Re: gnome-ppp, el mòdem intern i la mare que els va parir.

I un mòdem extern? On 12 Mar 2017 13:52, "Xavier De Yzaguirre i Maura" <xdeyzagui...@gmail.com> wrote: > Bon dia, > Em trobo que he d'agut de muntar un nou equip per a una masia, on l'accés > a internet sols es pot fer via ppp. > L'antic equip tenia mes de de 10 any

gnome-ppp, el mòdem intern i la mare que els va parir.

Bon dia, Em trobo que he d'agut de muntar un nou equip per a una masia, on l'accés a internet sols es pot fer via ppp. L'antic equip tenia mes de de 10 anys i l'havia actualitzat fins la versió 10.04 LTS de l'Ubuntu. Els vaig configurar el gnome-ppp per accedir al 908 de telefònica i amb això

renommer des interfaces ppp

bonjour, sous debian jessie qui me sert de routeur, jusqu'à aujourd'hui je n'avai qu'une seule interface ppp. très bientôt, je vais en avoir une seconde. Du coup, j'aimerai les renomé pour ne pas les confondre lors de déconnections ou plus simplement pour gérer le routage. en cherchant sur

Re: renommer des interfaces ppp

Jérémy Prégo a écrit : > > sous debian jessie qui me sert de routeur, jusqu'à aujourd'hui je n'avai > qu'une seule interface ppp. très bientôt, je vais en avoir une seconde. > Du coup, j'aimerai les renomé pour ne pas les confondre lors de > déconnections ou plus simplemen

Re: networking fails with temporary systemd (was auto starting of ppp has stopped working)

On Thursday, August 14, 2014 10:10:02 PM UTC+5:30, Michael Biebl wrote: Am 14.08.2014 16:02, schrieb Rusi Mody: On Thursday, August 14, 2014 3:40:03 PM UTC+5:30, Michael Biebl wrote: Am 14.08.2014 um 05:32 schrieb Rusi Mody: Aug 14 08:13:15 debian64 pppd[594]: Couldn't open the /dev/ppp

Re: networking fails with temporary systemd (was auto starting of ppp has stopped working)

On Tue, 19 Aug 2014, Chris Bannister wrote: On Mon, Aug 18, 2014 at 05:38:13AM -0700, Rusi Mody wrote: More specifically my concerns are: 1. Which apt package 'owns' which file? Use 'dpkg -S' e.g.: And if you need to do this often, I recommend the dlocate package. -- One disk to rule

Re: networking fails with temporary systemd (was auto starting of ppp has stopped working)

On Thursday, August 14, 2014 10:10:02 PM UTC+5:30, Michael Biebl wrote: Am 14.08.2014 16:02, schrieb Rusi Mody: On Thursday, August 14, 2014 3:40:03 PM UTC+5:30, Michael Biebl wrote: Am 14.08.2014 um 05:32 schrieb Rusi Mody: Aug 14 08:13:15 debian64 pppd[594]: Couldn't open the /dev/ppp

Re: networking fails with temporary systemd (was auto starting of ppp has stopped working)

On Mon, Aug 18, 2014 at 05:38:13AM -0700, Rusi Mody wrote: More specifically my concerns are: 1. Which apt package 'owns' which file? Use 'dpkg -S' e.g.: root@tal:~# dpkg -S /bin/systemd systemd: /bin/systemd root@tal:~# dpkg -S /lib/systemd/systemd systemd: /lib/systemd/systemd -- If you're

Re: networking fails with temporary systemd (was auto starting of ppp has stopped working)

On Thu, Aug 14, 2014 at 12:14 PM, Rusi Mody rustompm...@gmail.com wrote: On Thursday, August 14, 2014 9:10:02 PM UTC+5:30, Tom H wrote: On Thu, Aug 14, 2014 at 10:32 AM, Rusi Mody wrote: To add to my earlier report: I managed to remove graphviz and its associated libraries. So that now

Re: auto starting of ppp has stopped working

Am 01.08.2014 10:45, schrieb Tom H: Either /etc/modprobe.d/filename.conf or in /etc/modules if the former isn't early enough. You are mixing two things up here: /etc/modprobe.conf and /etc/modprobe.d/*.conf are for specifying module parameters. If you want to load modules during boot, you

Re: auto starting of ppp has stopped working

On Sunday, August 17, 2014 4:50:01 PM UTC+5:30, Michael Biebl wrote: Am 01.08.2014 10:45, schrieb Tom H: Either /etc/modprobe.d/filename.conf or in /etc/modules if the former isn't early enough. You are mixing two things up here: /etc/modprobe.conf and /etc/modprobe.d/*.conf are for

Re: auto starting of ppp has stopped working

On Sun, Aug 17, 2014 at 7:15 AM, Michael Biebl bi...@debian.org wrote: Am 01.08.2014 10:45, schrieb Tom H: Either /etc/modprobe.d/filename.conf or in /etc/modules if the former isn't early enough. You are mixing two things up here: /etc/modprobe.conf and /etc/modprobe.d/*.conf are for

Re: networking fails with temporary systemd (was auto starting of ppp has stopped working)

Am 14.08.2014 um 05:32 schrieb Rusi Mody: Aug 14 08:13:15 debian64 pppd[594]: Couldn't open the /dev/ppp device: No such file or directory Since you don't have the /dev/ppp device, I assume you are not using udev 208-7? Could you please post the version of udev (and systemd) you are using

Re: networking fails with temporary systemd (was auto starting of ppp has stopped working)

On Thursday, August 14, 2014 3:40:03 PM UTC+5:30, Michael Biebl wrote: Am 14.08.2014 um 05:32 schrieb Rusi Mody: Aug 14 08:13:15 debian64 pppd[594]: Couldn't open the /dev/ppp device: No such file or directory Since you don't have the /dev/ppp device, I assume you are not using udev 208-7

Re: networking fails with temporary systemd (was auto starting of ppp has stopped working)

On Thursday, August 14, 2014 8:00:03 PM UTC+5:30, Rusi Mody wrote: On Thursday, August 14, 2014 3:40:03 PM UTC+5:30, Michael Biebl wrote: Could you please post the version of udev (and systemd) you are using? Thanks Michael To add to my earlier report: I managed to remove graphviz and

Re: networking fails with temporary systemd (was auto starting of ppp has stopped working)

On Thu, Aug 14, 2014 at 10:32 AM, Rusi Mody rustompm...@gmail.com wrote: To add to my earlier report: I managed to remove graphviz and its associated libraries. So that now aptitude dist-upgrade gives me only 1 'issue' : The following packages have unmet dependencies: systemd-sysv :

Re: networking fails with temporary systemd (was auto starting of ppp has stopped working)

On Thursday, August 14, 2014 9:10:02 PM UTC+5:30, Tom H wrote: On Thu, Aug 14, 2014 at 10:32 AM, Rusi Mody wrote: To add to my earlier report: I managed to remove graphviz and its associated libraries. So that now aptitude dist-upgrade gives me only 1 'issue' : The following packages

Re: networking fails with temporary systemd (was auto starting of ppp has stopped working)

Am 14.08.2014 16:02, schrieb Rusi Mody: On Thursday, August 14, 2014 3:40:03 PM UTC+5:30, Michael Biebl wrote: Am 14.08.2014 um 05:32 schrieb Rusi Mody: Aug 14 08:13:15 debian64 pppd[594]: Couldn't open the /dev/ppp device: No such file or directory Since you don't have the /dev/ppp device

Re: networking fails with temporary systemd (was auto starting of ppp has stopped working)

On Thursday, August 14, 2014 3:40:03 PM UTC+5:30, Michael Biebl wrote: Am 14.08.2014 um 05:32 schrieb Rusi Mody: Aug 14 08:13:15 debian64 pppd[594]: Couldn't open the /dev/ppp device: No such file or directory Since you don't have the /dev/ppp device, I assume you are not using udev 208-7

Re: networking fails with temporary systemd (was auto starting of ppp has stopped working)

On Thursday, August 14, 2014 10:10:02 PM UTC+5:30, Michael Biebl wrote: Am 14.08.2014 16:02, schrieb Rusi Mody: On Thursday, August 14, 2014 3:40:03 PM UTC+5:30, Michael Biebl wrote: Am 14.08.2014 um 05:32 schrieb Rusi Mody: Aug 14 08:13:15 debian64 pppd[594]: Couldn't open the /dev/ppp

Re: networking fails with temporary systemd (was auto starting of ppp has stopped working)

. There are bugs I see like https://bugs.launchpad.net/ubuntu/+source/resolvconf/+bug/1000244 But I dont know what changes with systemd. 4. The second bunch of lines probably comes from the manually given modprobe ppp pon dsl-provider --bootlog excerpt-- Aug 14 08:13:14 debian64

Re: networking fails with temporary systemd (was auto starting of ppp has stopped working)

On Lu, 11 aug 14, 07:57:05, Rusi Mody wrote: If I start from grub using init=/bin/systemd it boots but networking does not work. Please attach the file 'bootlog' after running: journalctl -alb bootlog Kind regards, Andrei -- http://wiki.debian.org/FAQsFromDebianUser Offtopic

networking fails with temporary systemd (was auto starting of ppp has stopped working)

On Saturday, August 2, 2014 4:10:02 AM UTC+5:30, Michael Biebl wrote: Am 31.07.2014 20:27, schrieb Rusi Mody: After some recent upgrades (this is on jessie) auto starting of ppp has stopped working. So every time after booting I now have to run pppoeconf. Any ideas? This is a sysvinit

Re: auto starting of ppp has stopped working

On Thu, Jul 31, 2014 at 09:32:08PM -0700, Rusi Mody wrote: So now the question is: What is the 'modern' way of automatically doing 'modprobe pppoe' at boot/ifup time? Evidently something has changed that has made that stop happening... Put it in /etc/modules. I hope that is still the

Re: auto starting of ppp has stopped working

On Friday, August 1, 2014 12:20:02 PM UTC+5:30, Chris Bannister wrote: On Thu, Jul 31, 2014 at 09:32:08PM -0700, Rusi Mody wrote: So now the question is: What is the 'modern' way of automatically doing 'modprobe pppoe' at boot/ifup time? Evidently something has changed that has made that

Re: auto starting of ppp has stopped working

On Fri, Aug 01, 2014 at 12:13:43AM -0700, Rusi Mody wrote: On Friday, August 1, 2014 12:20:02 PM UTC+5:30, Chris Bannister wrote: On Thu, Jul 31, 2014 at 09:32:08PM -0700, Rusi Mody wrote: So now the question is: What is the 'modern' way of automatically doing 'modprobe pppoe' at

Re: auto starting of ppp has stopped working

On Fri, Aug 1, 2014 at 12:32 AM, Rusi Mody rustompm...@gmail.com wrote: On Friday, August 1, 2014 12:10:02 AM UTC+5:30, Rusi Mody wrote: After some recent upgrades (this is on jessie) auto starting of ppp has stopped working. So every time after booting I now have to run pppoeconf. Some

Re: auto starting of ppp has stopped working

On Fri, Aug 1, 2014 at 2:49 AM, Chris Bannister cbannis...@slingshot.co.nz wrote: On Thu, Jul 31, 2014 at 09:32:08PM -0700, Rusi Mody wrote: So now the question is: What is the 'modern' way of automatically doing 'modprobe pppoe' at boot/ifup time? Evidently something has changed that has

Re: auto starting of ppp has stopped working

On Friday, August 1, 2014 1:10:02 PM UTC+5:30, Chris Bannister wrote: On Fri, Aug 01, 2014 at 12:13:43AM -0700, Rusi Mody wrote: On Friday, August 1, 2014 12:20:02 PM UTC+5:30, Chris Bannister wrote: On Thu, Jul 31, 2014 at 09:32:08PM -0700, Rusi Mody wrote: So now the question is:

Re: auto starting of ppp has stopped working

On Fri, Aug 01, 2014 at 02:04:45AM -0700, Rusi Mody wrote: On Friday, August 1, 2014 1:10:02 PM UTC+5:30, Chris Bannister wrote: [...] tl;dr: http://knowyourmeme.com/memes/tldr too long; didn't read? ... um ... what was? My own post 'above' is what the 'tl;dr' referred to :-)

Re: auto starting of ppp has stopped working

On Friday, August 1, 2014 3:30:02 PM UTC+5:30, Chris Bannister wrote: On Fri, Aug 01, 2014 at 02:04:45AM -0700, Rusi Mody wrote: On Friday, August 1, 2014 1:10:02 PM UTC+5:30, Chris Bannister wrote: [...] tl;dr: http://knowyourmeme.com/memes/tldr too long; didn't read? ... um ...

Re: auto starting of ppp has stopped working

Am 31.07.2014 20:27, schrieb Rusi Mody: After some recent upgrades (this is on jessie) auto starting of ppp has stopped working. So every time after booting I now have to run pppoeconf. Any ideas? This is a sysvinit specific problem [1]. Spefically, udev no longer creates dead devices

Re: auto starting of ppp has stopped working

On Saturday, August 2, 2014 4:10:02 AM UTC+5:30, Michael Biebl wrote: Am 31.07.2014 20:27, schrieb Rusi Mody: After some recent upgrades (this is on jessie) auto starting of ppp has stopped working. So every time after booting I now have to run pppoeconf. Any ideas? This is a sysvinit

auto starting of ppp has stopped working

After some recent upgrades (this is on jessie) auto starting of ppp has stopped working. So every time after booting I now have to run pppoeconf. Any ideas? -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas

Re: auto starting of ppp has stopped working

On Friday, August 1, 2014 12:10:02 AM UTC+5:30, Rusi Mody wrote: After some recent upgrades (this is on jessie) auto starting of ppp has stopped working. So every time after booting I now have to run pppoeconf. Some progress... and a different question: Doing: # pon dsl-provider I get

Re: Problemas Con server PPP

El Thu, 26 Jun 2014 20:05:15 -0400, Frank Andres Saches Calzada escribió: Hola, has secuestrado un hilo, abro uno nuevo y corrijo el formato html. Hola estoy montando un server de conexion ras sobre debian con mgetty ppp pero cuando los usuarios se estan conectando los desconecta en

Problemas Con server PPP

Hola estoy montando un server de conexion ras sobre debian con mgetty ppp pero cuando los usuarios se estan conectando los desconecta en registrando su equipo en la red.Saludos Frank

Re: sobre mgetty+ppp+freeradius

El Mon, 29 Apr 2013 13:00:26 -0400, Ariel escribió: hola lista tengo implementado un servidor ras con el objetivo que algunos usuarios accedan a su correo mediante un modem, hasta ahora esta funcionando pero necesito varias cosas o al menos aclararlas por ejemplo segun lei en algunos manuales

sobre mgetty+ppp+freeradius

identifique las llamadas entrantes y las refleje en el log de freeradius o en algun log, preferiria en el de freeradius puesto que ahi es donde tengo casi toda la informacion que me interesa. los datos de interes serian estos: pplataforma: debian squeeze mgetty+ppp+freeradius+mysql (los usuarios

Not able to access anything beyond the PPP server.

Hi All, I'm Sai Krishna. I have a very fundamental problem. I'm trying to establish a connection from a client to LAN using PPP, where my machine is the client. Actually, I was able to ping the PPP server but not able to ping other machines in that network beyond the PPP server. I have done route

Connexion M2M SFR via wvdial et ppp

Bonjour, Je rencontre un problème avec un modem USB ercogener et une connexion m2m en gprs/3G : le lien ppp ne tient pas et le modem raccroche. Il me semble que l'ensemble des paramètres sont correctes. J'ai réussi (il y a deux ans) à faire fonctionner ce type de configuration mais

Re: Overcoming Debian(Linux?) paranoia - a gnome-ppp example

On Sat, May 12, 2012 at 05:02:31AM +0100, elbbit wrote: myhost$ adduser ricky dialout Furthermore, the user created by the debian installer (uid 1000) is automatically in this group. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble?

Re: Overcoming Debian(Linux?) paranoia - a gnome-ppp example

On Fri, 11 May 2012 22:39:49 -0500, Richard Owlett wrote: (...) I just installed Debian 6.0.4 using Synaptic to add gnome-ppp. My first attempt to configure my modem failed *SILENTLY* (but's another gripe;) Being inherently suspicious, I chose 'root terminal'. Then executed gnome-ppp. All

Re: Overcoming Debian(Linux?) paranoia - a gnome-ppp example

On Sat 12 May 2012 at 05:02:31 +0100, elbbit wrote: As wvdial uses a system-wide configuration file, I should imagine that a regular system user just needs to be added to the dialout group, with command: myhost$ adduser ricky dialout Why does a user need direct access to the serial port to

Re: Overcoming Debian(Linux?) paranoia - a gnome-ppp example

On Sat 12 May 2012 at 09:06:30 +0100, Jon Dowland wrote: On Sat, May 12, 2012 at 05:02:31AM +0100, elbbit wrote: myhost$ adduser ricky dialout Furthermore, the user created by the debian installer (uid 1000) is automatically in this group. I'd be inclined to say she isn't. If ppp

Re: Overcoming Debian(Linux?) paranoia - a gnome-ppp example

) single user laptop. ..wrong, you have a multi user system on your laptop. ..and, you're getting useful support for free from people who knows how to debug ppp and gnome-ppp, which is the only _useful_ fact in my post here. ;o) -- ..med vennlig hilsen = with Kind Regards from Arnt Karlsen

Re: Overcoming Debian(Linux?) paranoia - a gnome-ppp example

in this group. I'd be inclined to say she isn't. If ppp is installed she'd be in group dip. You are probably right: my desktop user is in dialout and I don't remember adding them but I must have done. A fresh squeeze install on a mac mini yesterday yields a user in dip but not dialout. Thanks

Overcoming Debian(Linux?) paranoia - a gnome-ppp example

6.0.4 using Synaptic to add gnome-ppp. My first attempt to configure my modem failed *SILENTLY* (but's another gripe;) Being inherently suspicious, I chose 'root terminal'. Then executed gnome-ppp. All went fine. That established I had a permissions issue : I then did man gnome-ppp Received

Re: Overcoming Debian(Linux?) paranoia - a gnome-ppp example

On 12/05/12 04:39, Richard Owlett wrote: Being inherently suspicious, I chose 'root terminal'. Then executed gnome-ppp. All went fine. That established I had a permissions issue : I then did man gnome-ppp Received *NO _USEFUL_ info!!!* As wvdial uses a system-wide configuration file, I

Re: Overcoming Debian(Linux?) paranoia - a gnome-ppp example

On 12/05/12 13:39, Richard Owlett wrote: I'm the _*ONLY*_ person to have physical access to the system. How do I force Debian to achieve functionality of CPM-80? [me date self Basically you need to (as root) add your user to the dialup group. grep dialout /etc/group man addgrp --gid ???

Re: Overcoming Debian(Linux?) paranoia - a gnome-ppp example

56K dial-up modem ;] I just installed Debian 6.0.4 using Synaptic to add gnome-ppp. My first attempt to configure my modem failed *SILENTLY* (but's another gripe;) It may be relevant - it would be useful if you could post any relevant output, info from logs etc. Being inherently suspicious, I

RESOLVED - was [Re: NEWBIE sanity check re gnome-ppp PLEASE]

Richard Owlett wrote: [snip] DEBIAN 6.0.3 with GNOME desktop 2. initial attempt to use gnome-ppp failed [snip synopsis of original troubleshooting It was a permissions issue. I was not a member of 'dialout' group. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org

Re: NEWBIE sanity check re gnome-ppp PLEASE

/ i386/iso-hybrid/ . It checked OK. Ooo-kay :-) 2. initial attempt to use gnome-ppp failed What did you do or how did you run it? At first I tried tried running it from sub-menu (Applications-Internet-GNOME ppp). Failure message was Can not open modem. The logfile expanded it saying

Re: NEWBIE sanity check re gnome-ppp PLEASE

-hybrid/ . It checked OK. 2. initial attempt to use gnome-ppp failed I tried about 6 months ago to get gnome-ppp working, and I was never satisfied with it. It seemed like maybe when I changed settings, they didn't take effect until I logged out/in again. Anyway, I dumped it for wvdial

Re: NEWBIE sanity check re gnome-ppp PLEASE

Richard Owlett rowl...@pcnetinc.com wrote: At first I tried tried running it from sub-menu (Applications-Internet-GNOME ppp). Failure message was Can not open modem. The logfile expanded it saying Cannot open /dev/ttyS3: Permission denied. FIRST, find out what kind of modem you have

Re: NEWBIE sanity check re gnome-ppp PLEASE

--- On Wed, 4/25/12, Indulekha indule...@theunworthy.com wrote: Then install pppconfig and create your connection with 'sudo pppconfig' run in the terminal, then start the connection with ppp-on-boot or manually using pon. That's the simple, easy, reliable way to do it, and it doesn't

Re: NEWBIE sanity check re gnome-ppp PLEASE

. It IS 6.0.3. It was downloaded from a link given on debian.org (don't recall which mirror) Today I compared the MD5 of the ISO to that given on http://mirrors.usc.edu/pub/linux/distributions/debian-cd/6.0.3-live/i386/iso-hybrid/ . It checked OK. 2. initial attempt to use gnome-ppp failed

Re: NEWBIE sanity check re gnome-ppp PLEASE

be sure about what you install as your OS, sir, or you can encounter bad suprises... Have you verified the md5sum of the media to know it comes from a trusted source? 2. initial attempt to use gnome-ppp failed What did you do or how did you run it? gnome-ppp is just a GUI frontend for Wvdial

NEWBIE sanity check re gnome-ppp PLEASE

OK already -- I've written both UNread manuals and MISread test procedures ;/ What am I using - I'm not sure: 1. the *HAND written* label on CD I used to load identified it as DEBIAN 6.0.3 with GNOME desktop 2. initial attempt to use gnome-ppp failed 3. I then did man gnome

Re: kppp dialing process hang up on 'starting pppd'. (was: bug in ppp - grave)

Hi Scott, of course, this shall not change to my problem. As you suggest, I will change from umtsmon to kppp and see, if this will work with latest ppp. If it doesn't, I will be pleased to help as well as I can. And sorry for my statements, I just wanted to explain, why I stated ppp

Re: kppp dialing process hang up on 'starting pppd'. (was: bug in ppp - grave)

Hi Scott, you are right, I mentioned umtsmon. But the problem was not beeing umtsmon updated, but ppp updated. Umtsmon is just a GUI to call ppp with additional parameters, nothing else. So the problem was IMO in ppp, as the only thing, which was changed, was the ppp binary, NOT umtsmon. I

Re: kppp dialing process hang up on 'starting pppd'. (was: bug in ppp - grave)

umtsmon updated, but ppp updated. Umtsmon is just a GUI to call ppp with additional parameters, nothing else. Well - that's your opinion (and surely you are entitled to it) :-) It's why I/we stopped using UMTSmon and moved to Kppp. Works for us as *we* want the fixes from the updated pppd. I

Re: kppp dialing process hang up on 'starting pppd'. (was: bug in ppp - grave)

to be the original poster. *I just asked for a link to the bugreport*.. Your log indicates a problem with *UMTSmon* - not *ppp(d)*. The OP is posting about a problem with Kppp - (your logs don't indicate problem with Kppp *either*.) Please start a new thread if you'd like to solve your, unrelated, problem

help PPP

Fala Marcelo, td blz? Estou instalando um servidor de firewall que irá distribuir o sinal de internet em um escritório, e com o Squeeze o PPPOE não funcinou como funcionava no Lenny. A saída do modem da GVT ligo em uma das placas do servidor, e para que o servidor atue como roteador, estou

Woody ... Squeeze, PPP works over a null modem; was Re (2): How to use serial ports?

From: peasth...@shaw.ca Date: Fri, 13 May 2011 09:57:26 -0800 May 13 08:56:14 dalton pppd[2046]: but I couldn't find any suitable secret (password) for it to use to do so. Previously, PPP would refer to /etc/passwd but seems to have forgotten that. In setting up the fresh machine I put

Re: latest ppp does not connect

Hello, Hans-J. Ullrich a écrit : I am getting problems with the latest version of running ppp from squeeze. As the version before was running well, I get no success in a connectio with the latest version. I am using umtsmon which is calling ppp with some switches, but it is the same

latest ppp does not connect

Hi all, I am getting problems with the latest version of running ppp from squeeze. As the version before was running well, I get no success in a connectio with the latest version. I am using umtsmon which is calling ppp with some switches, but it is the same, if I use pon, kppp, kde-ppp

Problemas no squeeze (beep, cdcd, ppp, octave...)

perfeitamente no etch/lenny, e não mudei nada no hardware.) 3) o ppp carrega no boot, mas de maneira inutilizável. O monitor do ppp0 inclusive é mostrado no gkrellm, mas a internet não é acessível nem ao root. É necessário rodar pppoeconf; ifdown dsl-provider; ifup dsl-provider; killall pppd -KILL

balancing 2 ppp-ifs

Good day. How I can balance 2 ppp connections the easiest way? Or divide them by protocol usage like 80s go to ppp0 and 21 - to ppp1? Thank You for Your time. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas

Re: converting home network to IPv6; ppp, IPv6, dsnmasq and iptables

NICs in the same machine need to be on different IPv6 networks ... same as in IPv4 (Doh!). Now, do the above observations mean I am now correctly using my IPv6 networking and ppp connection given by my ISP? Also, what is the HEX2::/64 address given to me by my ISP for? -- Please reply

  1   2   3   4   5   6   7   8   9   10   >